Broadxent CB2480 BLUETOOTH AUDIO TRANSMITTER User Manual USERS MANUAL

Broadxent Pte Ltd. BLUETOOTH AUDIO TRANSMITTER USERS MANUAL

USERS MANUAL

         Bluetooth Audio Transmitter (MS-6868H)   User’s Guide
   FCC Caution 1.  The device complies with Part 15 of the FCC rules. Operation is subject to   the following two conditions:   (1) This device may not cause harmful interference, and   (2) This device must accept any interference received, including interference           that may cause undesired operation. 2.  FCC RF Radiation Exposure Statement: The equipment complies with FCC   RF radiation exposure limits set forth for an uncontrolled environment.   This equipment should be installed and operated with a minimum     distance of 20 centimeters between the radiator and your body. 3.  This Transmitter must not be co-located or operating in conjunction with   any other antenna or transmitter. 4.  Changes or modifications to this unit not expressly approved by the     party responsible for compliance could void the user authority to operate    the equipment.  FCC Statement This device is intended only for OEM integrators under the following         1) The antenna must be installed such that 20 cm is maintained between antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not required.   However, the OEM integrator is still responsible for testing end-product for any additional compliance requirements required with module installed (for example, digital device emissions, PC peripheral requirements, etc.).  Important Note In the event that these conditions can not be example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid the FCC ID can not be used on the final product. In these circumstances, OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.
 End Product Labeling This transmitter module is authorized only for use in device where antenna may be installed such that 20 cm may be maintained between antenna and users (for example access points, routers, wireless ADSL and similar equipment). The final end product must be labeled in a area with the following: “Contains TX FCC ID: GI4L-MS6868H”.  Manual Information for End Users The end user must not have manual instructions to remove or install device.   The user manual for end users must include the following information in a prominent location: “IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located operating in conjunction with any other antenna or transmitter. as a result of e-mail transmission.”  Important Safety Precautions Always read and follow these basic safety precautions carefully when handling any piece of electronic component. 1. Keep this User Guide for future reference. 2. Keep this equipment away from humidity. 3. Lay this equipment on a reliable flat surface before setting it up. 4. The openings on the enclosure are for air convection hence protects the equipment from overheating.     5. All cautions and warnings on the equipment should be noted. 6. Never pour any liquid into the opening that could damage or cause electrical shock. 7. If any of the following situations arises, get the equipment checked by a service personnel:  Liquid has penetrated into the equipment  The equipment has been exposed to moisture  The equipment has not work well or you can not get it work           according to User Manual  The equipment has dropped and damaged  If the equipment has obvious sign of breakage 8. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT   UNCONDITIONED, STORAGE TEMPERATURE ABOVE 60°C OR BELOW -20°C, IT MAY DAMAGE THE EQUIPMENT.
 4  Bluetooth Audio Transmitter (MS-6868H) Introduction  >>> 2.1 Appearance
 >>> 2.2 Features     A Bluetooth Audio Transmitter with 3.5mm audio plug.  General Features General Power Source  Li-Polymer rechargeable Storage Temperature  0°C - 70°C Operating Temperature  5°C - 55°C Low Battery Indicator  Green LED will blink twice rapidly in succession for every 5 sec interval. LED  One Bi-Color LED (Blue-Device in Bluetooth operation/Green-Stand-by stage) or Separated LEDs Buttons Power/Pair Button Auto-Power Off  Device will auto-power off after 3 minutes in standby mode.    Audio Features Audio Audio Sampling(ADC) 44.1kHz,16bit Impedance  16 Ohms~32 Ohms@3.5mmjack Input Audio Line  1.2Vrms    Bluetooth Interface Blue Standard  Bluetooth Specification v1.2   Profile  A2DP, Hands-free, Headset RF Power  Bluetooth Class 2 (0~4dBm)
 6 Chipset  CSR BC03MM or equivalent Audio Codec  Sub-Band Codec (SBC) Distance 10 Meters    Play Time Playtime Audio Streaming  Up to 7 hours Standby  Up to 100 hours     Battery Charging MS-6868H is equipped with high quality Li-polymer battery. The battery duration could be up to 7 hours of music listening after 3.5 hours of full charging. Make sure of power sufficiency each time when you are about to use MS-6868H.
 >>> 2.3 Control and Indications    Function Key and LED indication Power/Pair button

Navigation menu