Broilmaster P4 Users Manual B100024 (P3,P4)
P3 to the manual 0b3da880-52ed-46b9-9d73-0b9f18da1280
2015-02-02
: Broilmaster Broilmaster-P4-Users-Manual-485464 broilmaster-p4-users-manual-485464 broilmaster pdf
Open the PDF directly: View PDF .
Page Count: 24
P3, P4 Page 1
PREMIUM "P" GAS GRILL
OWNER’S MANUAL
(NATURAL OR PROPANE GAS)
P3 AND P4 MODELS
B100024-1-0502
OPTIONAL ACCESSORIES SHOWN
Page 2 P3, P4
WARNING
REFERENCE THIS MANUAL FOR PROPER INSTALLATION AND MAINTENANCE INSTRUCTIONS. IMPROPER
INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR MAINTENANCE CAN CAUSE PERSONAL INJURY OR
PROPERTY DAMAGE. FOR ASSISTANCE OR ADDITIONAL INFORMATION CONSULT A QUALIFIED INSTALLER,
SERVICE AGENCY OR THE GAS SUPPLIER.
IMPORTANT
THIS MANUAL SHOULD BE READ THOROUGHLY BY THE PERSON INSTALLING THE GRILL AND ALL PERSONS
WHO WILL USE AND MAINTAIN THE GRILL. THE INSTALLER SHOULD BE SURE THE MANUAL IS LEFT IN THE
POSSESSION OF THE USER. THE USER SHOULD RETAIN THIS MANUAL FOR FUTURE REFERENCE WHEN
USING OR CLEANING THE GRILL AND TO PROPERLY IDENTIFY ANY REPAIR PARTS THAT MAY BE REQUIRED.
WARNING
BROILMASTER® GAS GRILLS MUST ONLY USE PROPANE CYLINDERS EQUIPPED WITH AN OVERFILL
PROTECTION DEVICE (OPD). USE ONLY A REPUTABLE PROPANE DEALER WHEN EXCHANGING OR FILLING
CYLINDERS. AN OVERFILLED OR IMPROPERLY FILLED PROPANE CYLINDER CAN BE DANGEROUS.
CAUTION: FOR YOUR SAFETY
IF YOU SMELL GAS: 1. SHUT OFF GAS TO THE APPLIANCE.
2. EXTINGUISH ANY OPEN FLAME.
3. OPEN THE GRILL LID.
4. IF ODOR CONTINUES, IMMEDIATELY CALL YOUR GAS SUPPLIER OR
FIRE DEPARTMENT.
5. DO NOT TOUCH ELECTRICAL SWITCHES.
CAUTION: FOR YOUR SAFETY
1. DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY OF
THIS OR ANY OTHER APPLIANCE.
2. AN LP CYLINDER NOT CONNECTED FOR USE SHALL NOT BE STORED IN THE VICINITY OF THIS OR ANY
OTHER APPLIANCE.
CAUTION:
PARTS MAY HAVE SHARP EDGES. WEAR LEATHER WORK GLOVES AND HANDLE PARTS CAREFULLY
DURING THE UNPACKING, ASSEMBLY AND INSTALLATION.
P3, P4 Page 3
Congratulations!Congratulations!
Congratulations!Congratulations!
Congratulations!
Welcome to the beauty, durability, and prestige of a
PREMIUM GAS GRILL by BROILMASTER®. With award-winning
excellence built into every feature and durability that
surpasses other premium gas grills, BROILMASTER has
manufactured the ultimate gas grill for discriminating
outdoor chefs for over 30 years.
At Broilmaster, we continually strive to enhance the
performance and quality of our products for your grilling
enjoyment. Every effort will be made to ensure that
Broilmaster continues to be
your choice
as the premium grill
of the future.
Whether you are at the lake or in the privacy of your own
backyard, the BROILMASTER® PREMIUM GAS GRILL performs
far beyond the ordinary and is designed to provide your
family with years of outdoor cooking pleasure.
Thank You!Thank You!
Thank You!Thank You!
Thank You!
Broilmaster
®
is a registered trademark of
Empire Comfort Systems, Inc.
918 Freeburg Ave.
Belleville, Illinois 62220
Telephone 800-851-3153
Page 4 P3, P4
Model No. Dealer
Serial No. Dealer Phone No.
Gas Type: Propane Natural Date of Purchase
Your Broilmaster® Premium Gas Grill is identified by model number, serial number, and
gas type. This information is provided on a product identification label located on the
grill’s control panel. For your convenience, complete this section for future reference
when contacting your dealer.
TABLE OF CONTENTS
Parts
Diagram.............................................................................................................................. 5
List......................................................................................................................................
6
Grill Assembly ............................................................................................................... 7-11
Propane Gas Grills ...................................................................................................... 12-14
Gas Conversion ............................................................................................................... 15
Natural Gas Grills ............................................................................................................. 16
Operation- Propane & Natural Grills ........................................................................... 17-18
Maintenance........................................................................................................................ 19
Troubleshooting................................................................................................................... 20
Notes ................................................................................................................................... 21
Warranty ......................................................................................................................... 22-23
CONGRATULATIONS!
You have chosen the finest grill for your outdoor cooking pleasure. Please take time to read
this entire manual before assembling your premium Broilmaster® gas grill.
P3, P4 Page 5
PARTS DIAGRAM
All repair part orders should be placed through your local Broilmaster® dealer. To locate a dealer in
your area, contact Broilmaster Customer Service at 800-851-3153 • WWW.broilmaster.com. To ensure
prompt and accurate service, please provide the following information when placing a repair part
order: Model Number, Serial Number, Part Name, Part Number, and Quantity of parts needed.
Page 6 P3, P4
PREMIUM "P" SERIES PARTS LIST
KEY P3BL P3HG P3GY P4BL P4HG P4GY
NO.PART NAME PART NO.PART NO.PART NO.PART NO.PART NO.PART NO.
1BRIDGE PIN B057805 B057805 B057805 B057805 B057805 B057805
2HINGE PIN B057804 B057804 B057804 B057804 B057804 B057804
3RETRACT-A-RACK B072695 B072695 B072695 B072696 B072696 B072696
4COOKING GRID B743100 B743100 B743100 B804687 B804687 B804687
5BRIQUETTE BAG B058122 B058122 B058122 B058122 B058122 B058122
6GRID LIFTER ASSEMBLY B064539 B064539 B064539 B064539 B064539 B064539
7HOSE & LP REGULATOR B069756 B069756 B069756 B069756 B069756 B069756
8GRILL BODY BOTTOM B076539 B100146 B100144 B076622 B100150 B100148
9LID STOP KNOB B100098 B100098 B100098 B100098 B100098 B100098
10 LID STOP B076521 B076521 B076521 B076521 B076521 B076521
11 CONTROL VALVE ASSEMBLY (LP) B070501 B070501 B070501 B070501 B070501 B070501
11 CONTROL VALVE ASSEMBLY (NAT) B070502 B070502 B070502 B070502 B070502 B070502
11A VALVE (LP) B076790 B076790 B076790 B076790 B076790 B076790
11A VALVE (NAT) B076789 B076789 B076789 B076789 B076789 B076789
11B MANIFOLD (LP) B069002 B069002 B069002 B069002 B069002 B069002
11B MANIFOLD (NAT) B069003 B069003 B069003 B069003 B069003 B069003
11C MOUNTING PLATE B064787 B064787 B064787 B064787 B064787 B064787
12 NATURAL CAP ORIFICE * B056647 B056647 B056647 B056647 B056647 B056647
13 GRILL BODY TOP B076538 B100147 B100145 B076621 B100151 B100149
14 HEAT INDICATOR B076625 B076625 B076625 B076625 B076625 B076625
15 HANDLE STAINLESS B070282 B070282 B070282 B070486 B070486 B070486
16 FOAM GRIP B073097 B073097 B073097 B073097 B073097 B073097
17 BRIQUETTE RACK B063066 B063066 B063066 B067449 B067449 B067449
18 BURNER ASSEMBLY B878531 B878531 B878531 B814801 B814801 B814801
19 COLLECTOR BOX ASSEMBLY B072701 B072701 B072701 B072701 B072701 B072701
20 RADIATION SHIELD B063065 B063065 B063065 B063065 B063065 B063065
21 COLLECTOR BOX SPACER B069743 B069743 B069743 B069743 B069743 B069743
23 ELECTRONIC IGNITOR B072218 B072218 B072218 B072218 B072218 B072218
24 IGNITOR GROUND LUG B069747 B069747 B069747 B069747 B069747 B069747
25 IGNITOR GROUND WIRE B072684 B072684 B072684 B072684 B072684 B072684
26 CONTROL PANEL ASSEMBLY W/LABEL B100152 B100152 B100152 B100153 B100153 B100153
-CONTROL PANEL LABEL (NOT SHOWN) B072686 B072686 B072686 B072197 B072197 B072197
27 VALVE KNOB B070084 B070084 B070084 B070084 B070084 B070084
28 KEPS NUT B073967 B073967 B073967 B073967 B073967 B073967
29 SHELF PIN B073963 B073963 B073963 B073963 B073963 B073963
30 CONVERSION LABEL * B100033 B100033 B100033 B100033 B100033 B100033
32 SPACER B662325 B662325 B662325 B662325 B662325 B662325
33 9/32 I.D. X 5/8 O.D. FLAT WASHER B076332 B076332 B076332 B076332 B076332 B076332
36 #10-24 X 3/4 SCREW B076522 B076522 B076522 B076522 B076522 B076522
37 3/8-16 X 1 1/2 SCREW B100117 B100117 B100117 B100117 B100117 B100117
38 3/8 STAR WASHER B100135 B100135 B100135 B100135 B100135 B100135
39 #10-24 X 1 SCREW B073978 B073978 B073978 B073978 B073978 B073978
40 STABILIZER ARM ** B906180 B906180 B906180 B906180 B906180 B906180
41 STABILIZER BRACKET ** B905048 B905048 B905048 B905048 B905048 B905048
42 #10-24 X 3/8 SCREW ** B100137 B100137 B100137 B100137 B100137 B100137
43 10-24 WING NUT B100125 B100125 B100125 B100125 B100125 B100125
* INCLUDED WITH PROPANE GRILLS ONLY.
** BURNER STABILIZER KIT IS INCLUDED WITH YOUR CART.
P3, P4 Page 7
GRILL ASSEMBLY
Recommended Tools
These items are recommended for the assembly
of your grill:
• Phillips screwdriver
• Adjustable wrench set
• Socket set
• Soapy water solution (to test for leaks)
• Liquid soap (for foam grip)
Grill Mountings
Assemble your base option before assembling
your Broilmaster® grill head.
Refer to the Broilmaster® Cart, Base, and Post
instructions provided with each accessory for
assembly, installation, and mounting procedures.
Before You Begin
All Broilmaster grills require some assembly and
installation. Follow all instructions unless noted
to apply only to other specific models.
If you purchased an accessory with your
Broilmaster, follow the instructions provided with
the accessory for assembly and installation. If
an instruction refers to a step that is not required
for your grill model, please continue to the next
step.
Each step of the installation is illustrated. In
each illustration parts are identified with “Key”
numbers. Key numbers appear in parenthesis
after a part name is mentioned for the first time in
the instructions and are labeled on the
illustrations. You can reference each part by its
key number on the Parts List if you need help in
identifying a part.
Compare the parts found in the shipping
container to the parts list provided. If any parts
are missing contact your Broilmaster® dealer
before beginning assembly.
CAUTION: FOR YOUR SAFETY
PARTS MAY HAVE SHARP EDGES. WEAR LEATHER WORK
GLOVES AND HANDLE PARTS CAREFULLY DURING THE
UNPACKING, ASSEMBLY AND INSTALLATION.
Page 8 P3, P4
Burner Stabilizing Arm
(Portable Cart Models Only)
On the burner assembly (18) remove the rear
screw, insert the burner stabilizing arm (40), and
reinstall the screw as shown. FIGURE 7.
Note: Burner Stabilizing Arm, Burner Stabilizing
Bracket, and Securing the Burner sections of this
manual apply only to portable cart models ONLY.
Hardware is packaged with your cart.
GRILL ASSEMBLY
Igniter Assembly
Slide the collector box spacer (21) and nut
(provided on assembly) onto the collector box
shaft and tighten. FIGURE 5.
Note: Peel protective film from control panel
before installing igniter.
Installing the Igniter
CAUTION: DO NOT CUT OR DAMAGE IGNITER WIRE.
Carefully thread the end of the igniter wire
through the center hole in the grill bottom. Slide
the ground lug (24) over the igniter wire and
fasten with nut provided.
Attach one end of the ground wire (25) to the
terminal on the rear of the electronic igniter.
Attach the remaining end to the ground lug.
FIGURES 5 AND 6.
Nut
25
24
21
19
FIGURE 5
40
18
Venturi
Tubes
FIGURE 7
24
AA ALKALINE
BATTERY
-
+
Battery Installation: Slide the spring onto the negative end of the battery.
Drop the battery and spring into the igniter and replace the button.
GROUND SPARK
FIGURE 6
P3, P4 Page 9
GRILL ASSEMBLY
Burner Stabilizing Bracket
(Portable Cart Models Only)
Tip: Test the alignment of the burner stabilizing
brackets before tightening the burner stabilizing
bracket.
Install the burner stabilizing bracket (41) and
fasten with the 10-24 x 3/4 phillips screw and
10-24 wing nut.
Radiation Shield
Place the radiation shield (20) in the grill
bottom. FIGURE 9.
Installing the Burner
Insert the burner assembly into the grill bottom with
the venturi tubes facing the front of the grill. FIGURE
10.
The gas jets from the control valve will be inside the
ends of the venturi tubes when properly installed.
FIGURE 11.
FIGURE 8
19
8
41
20
INSTALL THIS SIDE UP
FIGURE 9
FIGURE 10
11
Air
Shutter
Shutter Set
Screw
Venturi
Tube
FIGURE 11
36
Page 10 P3, P4
GRILL ASSEMBLY
Securing the Burner
(Portable Cart Models Only)
Secure the burner by aligning the burner stabilizing
bracket and the burner stabilizing arm and
fastening with a screw (42) and a keps nut (28).
FIGURE 12.
Lid Stop
Attach the lid stop assembly to the grill bottom as
shown. FIGURE 13.
Handle
For your added comfort a foam grip (16) has been
provided. FIGURE 15.
Tip: For ease of installation, slightly lubricate the
front handle with liquid soap before pushing the
foam grip into place.
Fasten the stainless steel front handle (15) to the
grill lid (13) with two #10-24 x 1" screws (39).
FIGURE 14.
FIGURE 13
39
16
15
14
13
FIGURE 14
41
18
FIGURE 12
42
39
32
33
36
FIGURE 15
28
28
P3, P4 Page 11
GRILL ASSEMBLY
Installing Racks
Place the briquet rack on the burner assembly.
Position the ceramic briquets evenly on the
briquette rack without overlapping.
Set the multilevel cooking grids FIGURE 17.
17
5
4
FIGURE 17
Grid Lifter
Assemble the grid lifter as shown. FIGURE 18.
When positioning or removing grids always use the
grid lifter provided with your grill.
38
37
38
37
FIGURE 18
Installing Char-Master
Briquets
Individually place the ‘Char-Master’ briquets in a
single layer evenly on your grill’s briquet rack;
DO NOT dump them onto the briquet rack. A
single layer of ‘Char-Master’ briquets is all that’s
needed. DO NOT overlap or stack the briquets.
See FIGURE 17.
After properly placing the ‘Char-Master’ briquets
on your grill’s briquet rack, there may be some
briquets left over. Save them for future use.
Before cooking, always preheat the grill as
directed by the grill’s operating instructions. Hot
briquets cause better, quicker cooking and
better flavor.
Cleaning
Routine preheating and routine burn-off (also
called postheating) of a grill will clean the ‘Char-
Master’ briquets. Periodically turn the briquets
over while they are cool.
Page 12 P3, P4
Never use Liquid Propane (LP) gas with a grill
designed for Natural gas, or Natural gas with a
grill designed for Liquid Propane gas. The type
gas required for your grill can be determined
from the product identification label located on
the grill’s control panel. Questions regarding
different types of gases should be directed to
your gas supplier.
Cylinder Requirements
YouR Broilmaster® Premium Gas Grill requires a
standard twenty (20) pound propane gas cylinder.
The maximum height allowable for a replacement
cylinder is approximately twelve (12") inches
(30.5 centimeters)
.
The propane gas cylinder used must be:
1. constructed and marked in accordance with the
specifications for LP gas cylinder of the U.S.
Department of Transportation (D.O.T.) or the
National Standard of Canada, CAN/CSA-B339,
Cylinders, Spheres, and Tubes for Transportation
of Dangerous Goods; and Commission as
applicable.
2. provided with a listed overfilling protection device
(OPD).
3. provided with a listed safety device having direct
access with the vapor space of the cylinder and
the cylinder supply system must be arranged for
vapor removal.
4. provided with a shutoff valve terminating in a
valve outlet as specified in the Standard for
Compressed Gas Cylinder Outlet and Inlet
Connections, ANSICGA-V-1.
5. provided with a plug to effectively seal off the
cylinder outlet when the cylinder is being stored
or transported.
6. provided with a collar to protect the cylinder valve.
CAUTION: DO NOT USE A PROPANE GAS CYLINDER
WHICH HAS A CAPACITY GREATER THAN TWENTY (20)
POUNDS WITH THIS GRILL AND SIDE BURNER.
Gas Type
PROPANE GAS GRILLS
Grill Location
When choosing the ideal location for your
Broilmaster® Premium Gas Grill, remember this
grill is designed for outdoor use ONLY.
You should never install or operate your grill in
any building, garage, or other enclosed area.
For your safety, this grill should not be installed
or operated under any combustible materials,
such as carports, covered porches, awnings, or
overhangs.
Never install or operate your grill in or on any
recreational vehicle or boat.
CAUTION: THE INSTALLATION AND OPERATION OF
THIS GRILL AT CLEARANCES LESS THAN SPECIFIED BELOW
MAY LEAD TO THE POSSIBILITY OF FIRE, PROPERTY
DAMAGE, OR PERSONAL INJURY.
A minimum clearance of sixteen (16") inches is
required from the sides of the grill to any
combustible material.
A minimum clearance of eighteen (18") inches is
required from the back of the grill to any
combustible material.
Some examples of combustible materials are a
wall, a fence, patio furniture, or the wall of your
home.
The area surrounding the grill should be clear to
ensure proper ventilation. Do not obstruct the
flow of combustion and ventilation air in any way.
The ventilation openings on the propane cylinder
enclosure must also remain free and clear of
debris.
Portable grills should be level and positioned
away from direct wind prior to each use.
WARNING: DO NOT INSTALL OR OPERATE THIS GRILL
WHERE GASOLINE OR OTHER FLAMMABLE MATERIALS ARE
USED OR STORED. FAILURE TO COMPLY WITH THIS
WARNING COULD RESULT IN EXPLOSION OR FIRE CAUSING
PROPERTY DAMAGE OR PERSONAL INJURY.
P3, P4 Page 13
PROPANE GAS GRILLS
Propane Cylinder Safety
Liquid Propane (LP) gas has a long history of
safe use when the safety precautions provided
in this manual are followed.
FAILURE TO FOLLOW THESE SAFETY PRECAUTIONS
COULD RESULT IN A FIRE OR EXPLOSION CAUSING
PROPERTY DAMAGE OR PERSONAL INJURY.
Propane gas cylinders should always be
handled, stored, and transported with extreme
caution in a secured upright position.
Never attempt to use or repair a propane gas
cylinder that has been damaged. Never attempt
to use or repair a cylinder with a faulty or
damaged valve outlet. A cylinder that has been
dropped, dented, or otherwise damaged must
be replaced.
A propane gas cylinder should never be
transported in the passenger area of a vehicle.
Keep cylinders out of direct sunlight and never
apply any other source of direct heat to them.
When refilling your cylinder, always insist on a
reputable, qualified gas dealer. Your propane
gas cylinder is filled by weight, and should
never exceed eighty (80%) percent of its weight
limit. If the cylinder is not completely empty, the
gas dealer must make necessary adjustments
to ensure it is not overfilled. Never use an
overfilled Propane gas cylinder.
Cylinder Storage
Your grill must be stored outdoors in a well
ventilated area if the cylinder is attached to it.
Disconnected cylinders must have a threaded
valve plug tightly installed and must not be
stored in any building, garage, or other enclosed
area.
Flammable materials (gasoline, grill covers,
etc.) must not be stored in the cylinder
enclosure.
Always store Propane cylinders in a secured
upright position, out of the reach of children.
CAUTION: NEVER USE LIQUID PROPANE (LP) GAS IN
A GRILL DESIGNED FOR NATURAL GAS, OR NATURAL
GAS IN A GRILL DESIGNED FOR LIQUID PROPANE GAS.
QUESTIONS REGARDING DIFFERENT TYPES OF GASES
SHOULD BE DIRECTED TO YOUR LOCAL GAS SUPPLIER.
Installation must conform to local codes or, in the
absence of local codes, with the National Fuel
Gas Code, ANSI Z223.1. In Canada, installation
shall be in accordance with CAN/CGA-B149.2
Propane Installation Code, or CAN/CGA-B149.1
Natural Gas Installation Code, and local codes
where applicable. Consult your local gas
supplier or propane gas dealer for code
regulations and recommended procedures.
WARNING: BROILMASTER® PREMIUM GAS GRILLS
REQUIRE LIQUID PROPANE (LP) CYLINDERS EQUIPPED
WITH AN OVERFILL PROTECTION DEVICE (OPD). AN
OVERFILLED OR IMPROPERLY FILLED PROPANE
CYLINDER CAN BE DANGEROUS.
Always use the pressure regulator and hose
assembly supplied with your Propane gas grill.
Note: Not all valve and cylinder combinations are
compatible. Check warning tag on valve and
cylinder as well as external fitting threads.
All Broilmaster® pressure regulators and hose
assemblies require Propane cylinders with a Type
1 connection device as illustrated. FIGURE 19.
Connection Requirements
FIGURE 19
Page 14 P3, P4
Connecting to Propane Gas
Position the cylinder in the opening in the bottom of
the cart and secure with the cylinder retaining
bracket. FIGURE 20.
Attach the pressure regulator to the Propane
gas cylinder’s valve using the plastic handwheel.
Tighten in a clockwise motion to achieve a gas
tight seal. FIGURE 21.
CAUTION: DO NOT USE A WRENCH OR ANY OTHER TOOL
TO TIGHTEN. USE OF A WRENCH OR OTHER TOOL WILL
DAMAGE THE PLASTIC HANDWHEEL.
To disconnect the Propane gas cylinder, turn
OFF the cylinder’s valve and the grill’s control
valve. Remove the regulator by turning the
plastic handwheel counterclockwise.
The pressure regulator has an outlet pressure of
not more than eleven (11”) inches water column.
It must be connected to the Propane gas
cylinder’s female valve outlet before the grill can
be operated.
CAUTION: OPERATION OF A PROPANE GAS GRILL
WITHOUT THE PRESSURE REGULATOR AND HOSE
ASSEMBLY WILL CAUSE GAS LEAKS WHICH COULD LEAD
TO FIRE OR EXPLOSION, RESULTING IN PROPERTY
DAMAGE OR PERSONAL INJURY.
The pressure regulator’s fitting must remain
clean and free of nicks and scratches. A dirty,
nicked or scratched fitting can cause a gas leak,
resulting in an explosion or fire. Use only
genuine Broilmaster® replacement parts unless
otherwise specified by the manufacturer.
Pressure Regulator and
Hose Assembly Connecting to Propane Gas
(Continued)
Cylinder
Retaining
Bracket
FIGURE 20
FIGURE 21
Clockwise
PROPANE GAS GRILLS
P3, P4 Page 15
GAS CONVERSION
Propane grills include a conversion kit for
natural gas. If you have a natural grill and wish
to convert it to propane you will need to
purchase the optional conversion kit #CK195.
Begin by removing all the components from the
inside of your grill. Locate and remove the
orifice hoods mounted on the underside of the
grill body. FIGURE 20.
Gas Conversion
Before installing the natural hoods, inspect them
for damage and note the number stamped on
the side. The correct hood will be marked "48".
The hoods are self-sealing, requiring no
additional pipe sealant. If you wish to use
sealant, take care to add it to the threads only to
avoid blocking the orifice.
Thread the hoods onto the supply tubes leaving
about a 1/8" gap between the hood and the
locking nut. FIGURE 21.
ORIFICE HOOD SUPPLY TUBE
HOSE AND
REGULATOR
Remove the hose and regulator from the valve.
Replace the components inside of your grill.
Remove the knobs from the valve assembly and
locate the adjustment screws on the inside of the
valve stem. Using a small screw driver, turn the
screws four (4) turns counterclockwise. Do not
back the screws out more than 4 1/2 turns or a
leak may result. FIGURE 22.
Connect the grill to the natural gas supply.
IMPORTANT: BEFORE LIGHTING YOUR GRILL, CHECK
THE GAS CONNECTIONS AND THE ADJUSTMENT SCREWS
FOR LEAKS USING A SOAPY WATER SOLUTION.
CAUTION: NEVER USE THIS OR ANY GAS APPLIANCE
WHICH MAY BE LEAKING GAS.
Replace the knobs.
1/8"
ORIFICE
HOOD
NUT
SUPPLY
TUBE
48
ADJUSTMENT SCREW
VALVE STEM
CONTROL PANEL
OFF
3
HI
OFF
RIGHT
3
HI
LEFT
1LO
2
LO
21
FIGURE 20
FIGURE 21
FIGURE 22
Place the completed conversion label adjacent
to the product identification label, located on the
control panel (26).
Page 16 P3, P4
Gas Type
The type gas required for your grill can be
determined from the product identification label
located on the grill’s control panel. Questions
regarding different types of gases should be
directed to your local gas supplier.
CAUTION: NEVER USE LIQUID PROPANE (LP) GAS IN
A GRILL DESIGNED FOR NATURAL GAS, OR NATURAL
GAS IN A GRILL DESIGNED FOR LIQUID PROPANE GAS.
QUESTIONS REGARDING DIFFERENT TYPES OF GASES
SHOULD BE DIRECTED TO YOUR LOCAL GAS COMPANY.
Connection Requirements
Installation must conform to local codes or, in the
absence of local codes, with the National Fuel
Gas Code, ANSI Z223.1. In Canada, installation
shall be in accordance with CAN/CGA-B149.2
Propane Installation Code, or CAN/CGA-B149.1
Natural Gas Installation Code, and local codes
where applicable. Contact your local gas
company for code regulations, recommended
procedures, and the installation of your grill’s gas
supply line.
Broilmaster® grills are not equipped with
pressure regulators. Your gas grill operates at a
manifold pressure of seven (7") inches water
column.
Connect cart mounted Natural gas grills to a
pre-installed gas supply line using the twelve
(12’) foot flexible hose and quick disconnect kit
which can be purchased from your local dealer.
CAUTION: THE GRILL AND ITS INDIVIDUAL SHUTOFF VALVE
MUST BE DISCONNECTED FROM THE GAS SUPPLY PIPING
SYSTEM DURING ANY SYSTEM PRESSURE TESTING AT TEST
PRESSURES IN EXCESS OF 1/2 PSIG.
CAUTION: THE GRILL MUST BE ISOLATED FROM THE
GAS SUPPLY PIPING SYSTEM BY CLOSING ITS INDIVIDUAL
MANUAL SHUTOFF VALVE DURING ANY PRESSURE TESTING
OF THE GAS SUPPLY PIPING SYSTEM AT TEST PRESSURES
EQUAL TO OR LESS THAN 1/2 PSIG.
NATURAL GAS GRILLS
Grill Location
When choosing the ideal location for your
Broilmaster® Premium Gas Grill, remember this
grill is designed for outdoor use ONLY.
You should never install or operate your grill in
any building, garage, or other enclosed area.
For your safety, this grill should not be installed
or operated under any combustible materials,
such as carports, covered porches, awnings, or
overhangs.
Never install or operate your grill in or on any
recreational vehicle or boat.
CAUTION: THE INSTALLATION AND OPERATION OF
THIS GRILL AT CLEARANCES LESS THAN SPECIFIED BELOW
MAY LEAD TO THE POSSIBILITY OF FIRE, PROPERTY
DAMAGE, OR PERSONAL INJURY.
A minimum clearance of sixteen (16") inches is
required from the sides of the grill to any
combustible material.
A minimum clearance of eighteen (18") inches is
required from the back of the grill to any
combustible material.
Some examples of combustible materials are a
wall, a fence, patio furniture, or the wall of your
home.
The area surrounding the grill should be clear to
ensure proper ventilation. Do not obstruct the
flow of combustion and ventilation air in any way.
The ventilation openings on the propane cylinder
enclosure must also remain free and clear of
debris.
Portable grills should be level and positioned
away from direct wind prior to each use.
WARNING: DO NOT INSTALL OR OPERATE THIS GRILL
WHERE GASOLINE OR OTHER FLAMMABLE MATERIALS ARE
USED OR STORED. FAILURE TO COMPLY WITH THIS
WARNING COULD RESULT IN EXPLOSION OR FIRE CAUSING
PROPERTY DAMAGE OR PERSONAL INJURY.
P3, P4 Page 17
Checking for Gas Leaks
Check for gas leaks every time you connect
your Broilmaster® propane gas grill to a Propane
gas cylinder, when a connected cylinder has not
been used recently, or when either a natural or
propane grill is being used for the first time.
CAUTION: DO NOT USE AN OPEN FLAME WHEN CHECKING
FOR LEAKS. CHECKING FOR LEAKS WITH AN OPEN FLAME
MAY LEAD TO A FIRE OR EXPLOSION, RESULTING IN
PROPERTY DAMAGE OR PERSONAL INJURY.
To check for gas leaks:
1. Use dish washing liquid and a little water to
make a soapy solution.
2. Turn OFF the knob on the control panel.
3. Turn ON the gas at the supply or cylinder. A
hissing sound indicates a leak. Turn OFF the
gas and repair the leak.
4. Apply the soapy water solution to all gas
connections.
5. Look for bubbles. Bubbles indicate a leak.
6. If there are bubbles turn OFF the gas and repair
the leak.
7. Turn the gas back ON and repeat the above
procedures until all leaks are repaired.
Operating Instructions
Using the Igniter
CAUTION: IF A BURNER FAILS TO LIGHT AFTER 5
SECONDS, TURN THE BURNER OFF FOR 5 MINUTES,
TO ALLOW THE GAS TO CLEAR, THEN TRY AGAIN.
1. Turn knob on the grill CLOCKWISE to the
OFF position.
2. Turn ON gas at the source.
3. With the grill lid open, push and turn the burner
control knob COUNTERCLOCKWISE to Hi.
4. Push and hold the igniter button until the
burner lights (approximately 5 seconds).
5. If a burner does not light, turn OFF all gas
and refer to the Troubleshooting section of
this manual.
Air Shutter Adjustment
The venturi air shutter(s) are preset at the
factory so that after five minutes the burner
flames are blue with well defined cones. If, after
five minutes the flame is yellow, or there is a gap
between the burner and the flame, adjust the
venturi air shutter as follows:
1. Turn gas OFF and let the burner cool.
2. Loosen shutter set screw
3. Close the air shutter to the minimum opening.
Refer to Figure 11.
4. Light the burner, wait five minutes and then
carefully open the air shutter until the flame is
blue and well defined.
5. Retighten the set screw.
OPERATION - PROPANE & NATURAL GRILLS
Operating Instructions
Using Matches
CAUTION: IF A BURNER FAILS TO LIGHT AFTER 5
SECONDS, TURN THE BURNER OFF FOR 5 MINUTES,
TO ALLOW THE GAS TO CLEAR, THEN TRY AGAIN.
1. Turn knob on the grill CLOCKWISE to the
OFF position.
2. Turn ON gas at the source.
3. Open the grill lid.
4. Insert a burning long wooden match through
the lighter hole on either side of the grill.
5. Turn the burner control knob
COUNTERCLOCKWISE to HI.
6. If a burner does not light, turn OFF all gas
and refer to the Troubleshooting section of
this manual. FIGURE 23.
FIGURE 23
Page 18 P3, P4
OPERATION
Electrical Accessories
If an electrical accessory (e.g. rotisserie) is used
on your grill, the accessory must be electrically
grounded in accordance with local codes or, in the
absence of local codes, with the National Electric
Code, ANSI/NFPA 70. In Canada, the electrical
accessory must be electrically grounded in
accordance with the applicable section of the
current Canadian Electrical Code, CSA C22.1.
Any electrical accessory should be equipped
with a three-prong (grounding) plug, and plugged
into a properly grounded three-prong receptacle
or wall outlet. Do not cut or remove the
grounding prong from the plug.
If an extension cord is required, use only a three-
prong cord and plug into a properly grounded
receptacle as described above.
Do not expose an electrical accessory to water.
Avoid using any electrical accessory in wet
weather as it may present a shock hazard.
Keep any electrical cord and fuel supply hose
away from all heated surfaces.
Before Cooking
Before cooking on a grill for the first time, it
should be broken in to burn off any oil residue
from the manufacturing process.
1. Raise the grill lid.
2. Light grill burner.
3. Burn on HI for ten minutes.
4. Close the lid and burn on HI for an additional
ten minutes.
5. Turn OFF gas. The grill is now ready for use.
Preheating
Before cooking on a gas grill, allow the grill to
preheat on HI for 5 minutes with the lid closed.
This uses very little fuel and hot briquette cook
quicker and provide better flavor.
Cooking
Broilmaster® is happy to provide a cookbook with
each of its grills. The cookbook contains helpful
cooking tips and instructions as well as great
tasting recipes for preparing many delicious
foods on your grill.
P3, P4 Page 19
L
R
FIGURE 24
MAINTENANCE
Cleaning the Grill
CAUTION: TO PREVENT INJURY, USE CARE WHEN
CLEANING A HOT GRILL.
NOTE: DO NOT USE A COMMERCIAL CLEANER ON THE
COOKING GRID. DO NOT BRUSH GRIDS WHILE THEY
ARE HOT. DO NOT SCRAPE GRIDS.
For baked on residue use a brass (NOT STEEL)
brush on the cooking grid and other components.
Burn Off
This process is much like that used in self-cleaning
ovens and is most efficient when completed after
each use of the grill.
CAUTION: DO NOT OPEN THE GRILL DURING THE BURN
OFF PROCESS. OPENING THE GRILL DURING THE BURN
OFF PROCESS MAY CAUSE A SUDDEN GREASE FIRE
FLARE UP THAT COULD BURN YOUR FACE AND ARMS.
WAIT UNTIL THE GRILL HAS COOLED BEFORE OPENING.
1. Turn gas knob to HI. Close lid and allow the
grill to burn for ten minutes, or until no smoke
is present. Do not allow the grill to burn for
more than 30 minutes.
2. Turn gas knob and supply to OFF and allow
the grill to cool.
3. Wipe COOL grill with a damp cloth to remove
soot.
Grill Bottom
Periodically remove cooking grids and flare guard
to clean the interior of the grill. Scrape off baked
on residue with a putty knife or brass brush and
rinse with water. Clean the bottom air holes with a
small knife.
Burner Maintenance
Stainless steel burners often turn reddish brown
after use. This does not effect the performance of
the grill. When cleaning the interior of the grill,
remove the burners and clean with a brass brush.
Wash with water and a mild detergent.
Grease Tray
Empty periodically. Replacement tray liners can
be purchased at most supermarkets where
disposable aluminum baking pans are displayed.
Venturi Tubes
The venturi tubes allow air and gas to mix prior to
burning, thus ensuring an efficient flame. Spiders
or other small insects may build webs or nests
inside the tubes obstructing air flow. Fire, or
flashback, can occur, in and/or around obstructed
venturi tubes and can cause damage to
components beneath the grill or an unsafe
condition. To reduce risk, inspections and
cleaning should be performed at least twice
monthly when spiders are active. If the grill has
been unused for an extended period of time
inspect the tubes before using the grill.
Clean venturi tubes as follows:
1. Remove the cooking grids and briquette rack.
2. Remove the burner from the grill.
3. Lay the burner face down and remove the four
retaining screws from the venturi tube plate
and the burner. FIGURE 24.
4. Use a small flexible brush to remove any
debris for the tube(s).
5. Flush with water.
6. Allow the tube(s)
to dry before
reinstalling.
7. Reinstall the
venturi tubes
and burner.
Exterior
Clean regularly with a solution of mild detergent
and hot water. Touch-up paint is available from
your dealer. Broilmaster® protective covers are
recommended. Stainless steel components can
be easily cleaned with a spray-on stainless steel
cleaner found in most hardware stores.
Briquettes
If the briquettes did not come clean during burn
off, after cooling turn them over. The residue will
burn off during warm-up for the next use.
Page 20 P3, P4
TROUBLESHOOTING
Although the manufacturer has attempted to ensure that your grill will operate properly and
satisfactorily, sometimes problems do arise. The following troubleshooting guide lists several possible
problems and their probable cause and solution.
Flames blow out.
Yellow flames.
Cold grill.
Misalignment of burner tube and
gas injector.
Poor combustion.
Extreme wind.
Air shutter improperly set.
Spider webs in venturi tubes.
Seasoning salts on burner.
Oil film on burner.
Preheat grill at least 5 minutes on HI with the
grill lid closed.
Realign/engage gas injector with the burner tube.
Adjust air shutter.
Turn or shield grill.
Open air shutter. See Maintenance Section.
Clean venturi tubes. See Maintenance Section.
Clean by washing burner with mild detergent.
Allow burner to operate on HI for 10-15 minutes.
Problem Solution
Burner will not light.
Misalignment of collector box and
burner.
Inadequate grill
temperature.
Cause
Gas injector not inserted in venturi
tube.
Clogged gas injector.
Obstruction in gas line.
Spider webs in venturi tubes.
Out of gas.
Poor combustion.
Misalignment of venturi tube and
gas injector.
Inadequate gas pressure.
Realign/engage gas injector with the venturi tube.
Remove gas injector from gas control assembly
and clean.
For propane models, ensure gas valve on
cylinder is OFF. Remove flexible hose and blow
out any debris.
Clean venturi tubes. See Maintenance Section.
Position electrode properly. Clean collector box.
Refill LP gas cylinder. If natural model, turn on
gas at source.
Adjust air shutter.
Contact gas supplier for assistance.
Realign/engage gas injector with the venturi tube.
Dead battery. Replace with AA Alkaline battery.
Incorrect orifice/valve setting. Refer to gas conversion instructions in this manual.
P3, P4 Page 21
NOTES
Page 22 P3, P4
WARRANTY
LIMITED WARRANTY
Manufactured in U.S.A. by Broilmaster, a Division of Empire Comfort Systems, Inc., P.O. Box
529, Belleville, Illinois 62222.
WHAT IS COVERED AND FOR HOW LONG.
From the date this grill is first purchased for use, Broilmaster will make available, at our factory, a
free replacement for any defective part covered by this warranty on the following basis:
LIMITED LIFETIME WARRANTY
•Aluminum Grill Housing
•Stainless Steel Burners
•Stainless Steel Carts
•Stainless Steel Carts and/or Mountings
•Side Burner & Housing
•Porcelain Coated Cast Iron Cooking Grids (Damaged by dropping, scraping or abrasive
cleaning voids the warranty for the cooking grids)
•Stainless Components for Built-in Series (BIKH, BIKSB, BIKBIN, BIKDR)
LIMITED 5-YEAR WARRANTY
•Painted Electrogalvanized Steel Components
LIMITED 2-YEAR WARRANTY
•Porcelain Coated Steel Cooking Racks
•All Other Parts
LIMITED 1-YEAR WARRANTY
•Rotisserie Units
•Premium Tool Set
•Grill Covers
•Shelving
P3, P4 Page 23
WARRANTY
WHAT IS NOT COVERED
•Removal and reinstallation cost.
•Labor for replacement or repairs.
•The costs of a service call to diagnose a problem.
•Transportation and shipping cost.
•Finishes on surface that are damaged by
improper installation, improper storage, accident, misuse, abuse or alteration.
•Inoperable due to improper or lack of cleaning.
•Damage from accident, misuse, alteration, abuse, improper installation or storage.
This warranty does not imply or assume any responsibility for consequential damages that might
result from use, misuse, or improper installation of this cooking appliance.
This warranty does not cover claims, which do not involve defective workmanship or materials.
A bill of sale, cancelled check, or payment record should be kept to verify purchase date and
establish warranty period
.
HOW TO GET SERVICE
Service under this warranty must be obtained by contacting your Broilmaster dealer. (See
telephone directory or call 800-851-3153, Consumer Relations Department, Empire Comfort
Systems, Inc.) Provide the dealer with Model number, Serial number, type of gas and purchase
verification information.
YOUR RIGHTS UNDER STATE LAW
This warranty gives you specific legal rights, and you may also have other rights, which vary from
state to state.
This warranty applies only to the original purchaser and may not be transferred. This warranty
applies as long as the grill can be used safely as a residential gas grill.
BROILMASTER®
A Division of Empire Comfort Systems, Inc.
918 Freeburg Ave.
Belleville, Illinois 62220
Phone: 800-851-3153
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Page 24 P3, P4
BROILMASTER®
A Division of Empire Comfort Systems, Inc.
918 Freeburg Ave.
Belleville, Illinois 62220
Phone: 1-800-851-3153
FAX: 1-800-443-8648
VISIT OUR WEB SITE AT WWW.broilmaster.com
FORM NO. B100024-1-0502
THE MOST DURABLE GRILL
KNOWN TO MAN