Brooks Automation SAR Inductive Tag System User Manual 1 1

Download:
Mirror Download [FCC.gov]
Document ID	331313
Application ID	03oC0m2BENeEp1wMNmYmEA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.41kB (180127 bits)
Date Submitted	2003-06-10 00:00:00
Date Available	2003-06-10 00:00:00
Creation Date	2003-03-21 11:35:39
Producing Software	Acrobat PDFWriter 4.05 für Windows
Document Lastmod	2003-06-05 10:52:21
Document Title	1.1.doc
Document Creator	Microsoft Word
Document Author:	amarx

Page 1 of 15
2003-03-21
Release 1.1
ID: ID030017
Software Reticle Read-Write Station Stand Alone
Technical Reports
Software Reticle Read – Write Station – Stand Alone
Technical Reports, Release 1.1
IMPORTANT NOTE.................................................................................. 3
HARDWARE DESCRIPTION.................................................................. 3
SOFTWARE SPECIFICATION............................................................. 4
HARDWARE........................................................................................... 6
3.1
3.2
SOFTWARE............................................................................................ 7
4.1
4.2
4.3
FUNCTIONALITY OF BUTTONS .............................................................. 7
MENU MODE ....................................................................................... 8
DOWNLOAD ........................................................................................ 9
FLOWCHARTS .................................................................................... 10
5.1
5.2
5.3
5.4
BAR CODE READER ............................................................................. 6
RETICLE READ / WRITE STATION ......................................................... 6
NORMAL MODE ..................................................................................10
17 PAGE MODE ..................................................................................11
MENU MODE .....................................................................................12
BRIGHTNESS MODE ............................................................................13
ASCII TABLE ....................................................................................... 14
Page 2 of 15
Software Reticle Read – Write Station – Stand Alone
Technical Reports, Release 1.1
Important Note
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Hardware Description
At the back side of the Reticle Read/Write Station is one RS232 Sub-D male
connector labeled with Barcode Reader. The barcode reader P302FZY has to be
connected there. The power supply for this unit has to be connected to the female
connector at the back.
Connect the external power supply (24V) to the connector which is labeled with
power supply, and the reader starts working. The RF Tag reader needs about 3
seconds for initialization. The antenna is justified and the display will be initiated.
After this the reader shows the current software version and it is in operation
mode.
Page 3 of 15
Software Reticle Read – Write Station – Stand Alone
Technical Reports, Release 1.1
Software Specification
The Reticle Read/Write Station is used to write the RSP data, which will be read
from the barcode labels on the top of the RSP, to the RF tag of the RSP.
Barcode Data:
All bar codes are code 69 labels.
Label one is the product name, the second is the layer / version and the third is
the CID.
The information on the labels have to be written to the tag as follows:
Page1:
Page2:
Page3:
Page4:
Page5:
lower CID
upper CID
first characters of product names
remaining characters of product names
layer / version
right justified
right justified
left justified
left justified
left justified
Example:
BC data:
Product Name: 1X30SA
Layer / Version: MT52MB2
CID:
900630
RF tag data:
Byte
Page1
Page2
Page3
Page4
Page5
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
Pages 6 .. 17 are filled with the blank byte filler character (see section 4.2).
The product name can be 1-16 characters long. The layer/version can be 1-8
characters long. Any unused bytes on the RF tag are filled with user configurable
filler characters (see section 4.2).
Page 4 of 15
Software Reticle Read – Write Station – Stand Alone
Technical Reports, Release 1.1
Logistical layout of functionality:
1.
2.
3.
4.
5.
6.
RSP will be placed on Reticle Read / Write Station.
The RF tag will be read automatically and the result will be shown on the
display.
The operator writes the label data to the tag. Therefore he reads the
labels with the bar code reader. If the bar codes were read correctly the
operator verifies the data. If everything was OK the operator presses the
‘Write’ button to transmit the data to the RF tag. Not used bytes will be
filled with values which are stored as parameters in the software.
After a successful writing the pod could be removed from the unit.
It is possible to verify the tag data against the bar code labels. Therefore
the operator presses the ‘Verify’ button and reads the labels ones more.
After that the tag reader gets the information from the RF tag. The
software checks the data of both the tag and the bar code and reports
any error.
If the operator reads a wrong label it is possible to clear the data /
memory by pressing the ‘Reset’ button.
Page 5 of 15
Software Reticle Read – Write Station – Stand Alone
Technical Reports, Release 1.1
Hardware
3.1 Bar Code Reader
The barcode works with an ASCII protocol which uses the following settings,
COM settings: 38.400,N,8,1 (baud rate, parity, data bits, stop bits).
The bar code reader is configured as follows:
1.Set all defaults:
2. Fujitsu RS-232C
3. Baud rate 38.400
Note: If the BCR is not configured you have to read these labels in the right order.
3.2 Reticle Read / Write Station
The tag reader includes an RF module which is working on the frequency of
134.2 kHz. To display the data, the device has a dot character display module
with four lines and 40 signs per line. Additional the unit includes a membrane
keyboard with four buttons. The equipment is designed to handle any SEMI-E111
compliant carrier.
Page 6 of 15
Software Reticle Read – Write Station – Stand Alone
Technical Reports, Release 1.1
Software
After the equipment was connected to the power supply, the tag reader tune the
antenna automatically. If no RSP is placed on the station, the software version is
displayed on the display.
4.1 Functionality of Buttons
Read
The ‘Read’ button starts reading all 17 pages of the tag and displays the main
contents (product name, version/layer, CID) on the display. During the reading
the first line of the display shows “RF Tag is reading …”.
Write
The ‘Write’ button initiate the data transfer of the read bar codes to the tag. At first
the barcode labels have to be read with the BCR gun. The first line of the display
shows which label has to be read. When all labels are read, the operator has to
verify the bar codes on the display. The message “to write RFID press WRITE
button” is shown on the display. Press the ‘Write’ button ones more to write the
bar code data to the tag. If the data were written to the tag, the reader reads the
data again from the tag to verify a successful writing.
After pressing the ‘Write’ button the following messages are displayed on the first
line of the display:
§
§
§
“writing tag …”
“RF Tag is verifying …”
“RFID data written – remove pod”
Otherwise an error message is displayed on the screen.
Verify
To verify the written tag data, press the ‘Verify’ button. Then the operator has to
read the bar codes in the same way as on write procedure. The RF reader starts
with the tag reading automatically after the last label was read. An appropriate
message will be displayed. The verification is successful if Product Name,
Layer/Version and the CID of the POD is exactly the same (depend on length of
the barcode labels!) as the data on the tag. If a label includes a string of 8 signs,
that string will be checked against the first 8 bytes of the tag area.
Page 7 of 15
Software Reticle Read – Write Station – Stand Alone
Technical Reports, Release 1.1
Reset
The ‘Reset’ button is used to clear the data in the reader memory or to clear the
whole tag. To clear the memory of the reader, only press the ‘Reset’ button. The
display shows “Buffer cleared” and blank data. To clear the whole tag, press the
‘Reset’ button for more than 3 seconds and confirm the following question with
the ‘Verify’ button. Page 1 to page 17 will be filled with the value 0x00. While
writing to the tag the message “Clearing RF tag …” is displayed on the screen.
After successful clearing the message “Buffer and RF tag cleared” will be
displayed on the screen.
17 page mode
A pod must be placed on the equipment, otherwise you cannot switch to this
mode. Press the ‘Verify’ button for more then 3 seconds to enter the ‘17 page
mode’. Confirm the following question with the ‘Verify’ button. Then the software
asks for the output format of the tag data. The available formats are ASCII or
hexadecimal.
In the ASCII mode all not presentable characters will be converted to inverse
blanks (out of 0x20 .. 0x7F).
In Hex mode the value is shown as two ASCII hex digits from 00 to FF.
This mode can be leaved either by pressing the ‘Reset’ button or removing the
pod.
An ‘L’ is displayed in the right column if the RF tag page is locked.
4.2 Menu Mode
To enter the menu mode, ensure that no pod is placed on the station otherwise
the menu mode is not available.
Press both the ‘Verify’ button and the ‘Reset’ button at the same time for more
than 3 seconds to enter the menu mode.
For menu structure and navigation see the menu flow chart.
The filler of product data and layer data are shown as hex value from ‘00’ to ‘FF’.
The filler bytes will be cut before the data is displayed on the screen.
e.g.: current Product Name filler is 0x21 = ‘!’
Product Name: X!34SA!!!!!!!!!! is displayed as X!34SA
(change filler to 0x23 = ‘#’)
Product Name: X!34SA!!!!!!!!!!
displayed as X!34SA!!!!!!!!!!
Product Name: YSY#5023########
displayed as YSY#5023
Same behavior is valid for Layer/Version data.
Page 8 of 15
Software Reticle Read – Write Station – Stand Alone
Technical Reports, Release 1.1
The CID is defined as an ASCII value. Lowest value is  (0x20), up to
 (0x7F). The CID is displayed without of characters which are less than
0x31 hex = ASCII ‘1’ as leading digit.
e.g.:
CID: 0000000000120034 displayed as 120034 (leading ASCII ‘0’)
CID: 0x00..0x00 120034 displayed as 120034 (leading 0x00 hex)
CID: 5555555555120034 displayed as 5555555555120034 (leading ASCII ‘5’)
The sensor delay is the time between the moment the pod is placed on the
station and the sensor is switched. The sensor delay time is only valid for placing
the pod on the station, not for removing the pod.
Sensor delay is a two digit value for 01 to 99.
(01 = 100ms, 02 = 200ms, … , 99 = 9,9 seconds)
Blank byte is defined to fill not used pages of the tag. It is stored like product and
layer filler with identically range. The blank bytes will not checked by verification!
Follow the button description which is shown on the right side of the display.
4.3 Download
This option is needed to update the software of the equipment.
For this you need a software update tool which you can get from HERMOS. For
detailed information read the documentation of this tool.
Page 9 of 15
Software Reticle Read – Write Station – Stand Alone
Technical Reports, Release 1.1
Flowcharts
5.1 Normal Mode
Power up
Event:
Remove pod
Reticle SMIF Pod Read/Write Station
by HERMOS Informatik GmbH
Software Version: 1.3
Event:
Place pod
Write
button
Read
button
Yes
barcode
read?
Verify
button
No
press
long?
No
read 1. label /
read 2. label /
read 3. label
read data
from RF tag
Reset
button
clear
buffers
No
No
verify
button?
Yes
Verify
button?
Yes
Yes
write data to
RF tag
verify data
(BC labels / RF tag)
update display
Page 10 of 15
clear buffer
and RF tag
Software Reticle Read – Write Station – Stand Alone
Technical Reports, Release 1.1
5.2 17 Page Mode
Enter 17 page mode
with Verify button
long
Do you want to enter 17 page state?
No
READ = Yes | WRITE = No
back to normal
operation / reading
POD
Yes
choose display format
HEX
READ = ASCII | WRITE = HEX
ASCII
B:1|2|3|4|5|6|7|8|L
P01:0|0|9|0|0|6|3|0|
P02:0|0|0|0|0|0|0|0|
P03:1|X|3|0|S|A| | |
B:1 |2 |3 |4 |5 |6 |7 |8 |L
P01:30|30|39|30|30|36|33|30|
P02:30|30|30|30|30|30|30|30|
P03:31|58|33|30|53|41|00|00|
Press the ‘Reset’ button or remove pod to leave this state.
Use the ‘Read’ and ‘Write’ button to scroll the pages (step: 3 pages)
Page 11 of 15
Software Reticle Read – Write Station – Stand Alone
Technical Reports, Release 1.1
5.3 Menu Mode
Enter menu with
Verify and Reset
button long
(no pod present)
Download select
Main menu
Display
Parameter
Download
Display select
Parameter select
Display Menu
------------------DSP bright up
DSP bright down
Download
Filler select
Menu Filler
Product
Layer
CID
Parameter Menu
Filler
Reader Parameter
Not used
Reader
Parameter select
Menu Parameter
Sensor delay
: 05
Blank byte
: 00
: 00
: 00
:0
Press the ‘Verify’ button for more than 3 seconds to save the parameters!
Press the ‘Reset’ button to leave the current menu level and return to the parent
menu level or to leave the menu.
Page 12 of 15
Software Reticle Read – Write Station – Stand Alone
Technical Reports, Release 1.1
5.4 Brightness Mode
Verify button to enter
Display menu
DSP
changed?
yes
no
key
pressed?
Display Menu
----------------DSP bright up
DSP bright down
| Read
| Write
| Reset
= up
= down
= ESC
no
yes
switch button:
READ
Read button
select DSP bright up
DSP brightness + 1 step
Write button
select DSP bright down
DSP brightness - 1 step
WRITE
VERIFY
RESET
Verify button
Reset button
exit display
menu
Page 13 of 15
Software Reticle Read – Write Station – Stand Alone
Technical Reports, Release 1.1
Dec
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
ASCII table
Hex
00
01
02
03
04
05
06
07
08
09
0A
0B
0C
0D
0E
0F
10
11
12
13
14
15
16
17
18
19
1A
1B
1C
1D
1E
1F
Ctrl
^@
^Â
^B
^C
^D
^E
^F
^G
^H
^I
^J
^K
^L
^M
^N
^O
^P
^Q
^R
^S
^T
^U
^V
^W
^X
^Y
^Z
^[
^\
^]
^^
^_
Code
NUL
SOH
STX
ETX
EOT
ENQ
ACK
BEL
BS
HT
LF
VT
FF
CR
SO
SI
DLE
DC1
DC2
DC3
DC4
NAK
SYN
ETB
CAN
EM
SUB
ESC
FS
GS
RS
US
Dec
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
Page 14 of 15
Hex
20
21
22
23
24
25
26
27
28
29
2A
2B
2C
2D
2E
2F
30
31
32
33
34
35
36
37
38
39
3A
3B
3C
3D
3E
3F
Char
“
‘
Software Reticle Read – Write Station – Stand Alone
Technical Reports, Release 1.1
Dec
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
Hex
40
41
42
43
44
45
46
47
48
49
4A
4B
4C
4D
4E
4F
50
51
52
53
54
55
56
57
58
59
5A
5B
5C
5D
5E
5F
Char
Dec
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
Hex
60
61
62
63
64
65
66
67
68
69
6A
6B
6C
6D
6E
6F
70
71
72
73
74
75
76
77
78
79
7A
7B
7C
7D
7E
7F
HERMOS Informatik GmbH
Gartenstrasse 19, D-95490 Mistelgau
Page 15 of 15
Char
DEL
Tel. +49-9279/991-910
Fax +49-9279/991-900

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Creator                         : Microsoft Word
Create Date                     : 2003:03:21 11:35:39
Title                           : 1.1.doc
Author                          : amarx
Producer                        : Acrobat PDFWriter 4.05 für Windows
Modify Date                     : 2003:06:05 10:52:21+02:00
Page Count                      : 15
Has XFA                         : No

EXIF Metadata provided by EXIF.tools