Brother Bas 342F Owner S Manual

2014-07-05

• front
• SAFETY INSTRUCTIONS
  • 1. Safety indications and their meanings
  • 2. Notes on safety
  • 3. Warning labels
• CONTENTS
• 1. NAME OF EACH PART
• 2. SPECIFICATIONS
  • 2-1. Specifications
  • 2-2. Examples of sewing patterns
• 3. INSTALLATION
  • 3-1. Power table
  • 3-2. Installing the control box
  • 3-3. Installing the rubber cushions
  • 3-4. Installing the oil pan
  • 3-5. Installing the cushions
  • 3-6. Installing the switching plate
  • 3-7. Installing the machine head
  • 3-8. Installing the head rest
  • 3-9. Installing the liquid cooling tank, optional
  • 3-10. Installing the operation panel
  • 3-11. Connecting the ground wire
  • 3-12. Connecting the cords
  • 3-13. Piping (for pneumatic)
  • 3-14. Installing the belt cover
  • 3-15. Installing the foot switch
  • 3-16. Installing the needle sub plate
  • 3-17. Installing the spool stand
  • 3-18. Installing the eye guard
• 4. LUBRICATION
  • 4-1. Lubrication points
• 5. OPERATION
  • 5-1. Name and function of each operation panel item
  • 5-2. Operating procedure
  • 5-3. Operating the foot switch
  • 5-4. Operating the emergency stop switch
  • 5-5. Operating the thread wiper switch (KE-435C)
• 6. CHECKING THE SEWING PATTERN
• 7. CORRECT USE
  • 7-1. Selecting the needle and thread
  • 7-2. Installing the needle
  • 7-3. Threading the upper thread
  • 7-4. Winding the lower thread
  • 7-5. Replacing the bobbin case and threading the thread
  • 7-6. Thread tension
• 8. SEWING
• 9. MAINTENANCE AND INSPECTION
  • 9-1. Checking the needle
  • 9-2. Cleaning the rotary hook
  • 9-3. Lubrication
  • 9-4. Draining the oil
  • 9-5. Cleaning the control box air inlet port
  • 9-6. Cleaning the air holes of belt cover and frame side cover
  • 9-7. Cleaning the eye guard
• 10. STANDARD ADJUSTMENTS
  • 10-1. Adjusting the needle bar height
  • 10-2. Adjusting the needle bar lift amount
  • 10-3. Adjusting the driver needle guard
  • 10-4. Adjusting the needle clearance
  • 10-5. Adjusting the shuttle race thread guide
  • 10-6. Adjusting the thread take-up amount
  • 10-7. Adjusting the movable knife
  • 10-8. Adjusting the work clamp lift amount
  • 10-9. Work clamp interchangeability
  • 10-10. Adjusting the needle up stop position
  • 10-11. Adjusting the thread wiper
  • 10-12. Checking the input sensor and DIP switch input
  • 10-13. Checking the input voltage
  • 10-14. Clearing all memory settings
  • 10-15. Moving stitch patterns
  • 10-16. Adjustment of air pressure (for pneumatic)
  • 10-17. Adjustment of inner clamping device
  • 10-18. Work clamp adjustment (KE-435C)
  • 10-19. Changing the work clamp lift (KE-435C)
• 11. USING THE COUNTERS
  • 11-1. Using the bobbin thread counter
  • 11-2. Using the production counter
• 12. CHANGING FUNCTIONS USING THE DIP SWITCHES
  • 12-1. Operation panel DIP switches
  • 12-2. DIP switches inside the control box
  • 12-3. Using user programs
• 13. CHANGING SPECIAL FUNCTIONS USING THE MEMORY SWITCHES
  • 13-1. Using the cycle sewing function
• 14. SETTING THE WORK CLAMP MODE
  • 14-1. Setting solenoid work clamp mode
  • 14-2. Setting pneumatic work clamp mode
  • 14-3. Light work clamp
  • 14-4. Setting reverse work clamp mode
• 15. TABLE OF ERROR CODES
• 16. GAUGE PARTS LIST ACCORDING TO SUBCLASSES
• 17. MAKING THE FEED PLATE AND WORK CLAMP PLATE FOR INNER CLAMPING DEVICE
  • 17-1. Sewing area
  • 17-2. How to make a sewing pattern
  • 17-3. How to make the feed plate
  • 17-4. How to make the work clamp plate
  • 17-5. Replacing the work clamp crank and work clamp plate holder
• 18. TROUBLESHOOTING
• 19. OPTIONAL PARTS
• back