Brother Dcp 8020 Quick Start Guide ALL_DCP_QSG_US

Brother-Dcp-7020-Quick-Start-Guide brother-dcp-7020-quick-start-guide

DCP-8020 QSG_DCP_8020_EN_298

2014-07-05

: Brother Brother-Dcp-8020-Quick-Start-Guide brother-dcp-8020-quick-start-guide brother pdf

Open the PDF directly: View PDF .
Page Count: 31

Download
Open PDF In Browser	View PDF

Setting Up
the Machine
Windows®
USB

Step 1

Windows®
Parallel

Setting Up the Machine

Step 2

Windows
NT® 4.0
Parallel

USB

Windows®
Optional Wireless
Network
Optional Wireless
Network

Keep this “Quick Setup Guide”, User’s Guide and supplied CD-ROM in a convenient place for
quick and easy reference at all times.

Macintosh®

Setup is Complete!

Installing the Drivers & Software

Macintosh®

DCP-7020

Quick Setup Guide

Before you can use the machine, you must set up the hardware and install the software.
Please read this “Quick Setup Guide” for the correct setup procedure and installation
instructions.

■ Getting Started
Carton Components
DCP

1
2

3
4

Quick Setup Guide

7
6
5

1. Automatic Document Feeder (ADF) 5. Paper Tray
2. Control Panel
6. Front Cover
3. Face-down Output Tray
7. Power Switch
8. Document Cover
Support Flap with Extension
9. ADF Document Output Support
(Support Flap)
4. Manual Feed Slot
Flap

Drum Unit Assembly

AC Power Cord

(including Starter Toner Cartridge)

CD-ROMs
For Windows®
For Macintosh®

User’s Guide

Accessory Order Form
(USA/Canada only)

Carton components may differ from one country to another.
Save all packing materials and the carton.
The interface cable is not a standard accessory. Please purchase the appropriate interface cable for the
interface you intend to use (Parallel or USB).
■ USB interface cable
Please make sure you use a USB 2.0 interface cable that is no longer than 6 feet (2.0 meters).
Do not connect the USB cable to a non-powered hub or a Mac® keyboard.
When you use a USB cable, make sure you connect it to the USB port of your computer and not to a
USB port on a keyboard or a non-powered USB hub.
■ Parallel interface cable
Please make sure you use a Parallel interface cable that is no longer than 6 feet (2.0 meters).
Use a shielded interface cable that is IEEE 1284-compliant.

When you move the machine, grasp the side handholds that are under the scanner. Do NOT carry the
machine by holding it at the bottom.

Control Panel
1

Stack
100%

Copies:01
Auto

1. Liquid Crystal Display (LCD)

2. Navigation keys

3. Job Cancel key

4. Stop/Exit key

5. Start key

6. Scan key

7. Set key

8. Menu key

9. Copy keys (Temporary Settings)

For the details of the control panel, see "Control panel overview" in Chapter 1 of the User’s Guide.

Warning

Improper Setup

Hint

User’s Guide

Indicates warnings that
must be observed to
prevent possible
personal injury.

Alerts you to devices and
operations that are not
compatible with the
machine.

Indicates notes and
Indicates reference to the
useful tips to remember
User’s Guide.
when using the machine.

Table of Contents
Setting Up the Machine

Step 1
1.
2.
3.
4.
5.

Step 2

Install the Drum Unit Assembly ........................................................................ 4
Load Paper in the Paper Tray ........................................................................... 5
Install the Power Cord ....................................................................................... 6
Selecting Your Language (Canada Only)......................................................... 6
Setting the LCD Contrast .................................................................................. 6

Installing the Drivers & Software
Supplied CD-ROM “MFL-Pro Suite”..................................................................... 8
For USB Interface Cable Users
■ For Windows® 98/98SE/Me/2000 Professional/XP ...........................................10

For Parallel Interface Cable Users

■ For Windows® 98/98SE/Me/2000 Professional/XP ...........................................13

For Windows NT® Workstation Version 4.0 Users ........................................... 16
For Optional NC-2200w Users
■ External Wireless Print/Scan Server Users ......................................................18

For USB Interface Cable Users

■ For Mac OS® 9.1 to 9.2 .......................................................................................20
■ For Mac OS® X 10.2.4 or greater........................................................................22

For Optional NC-2200w Users

■ For Mac OS® X 10.2.4 or greater........................................................................25

■ Options and Consumables
Options ................................................................................................................. 28
Replacement Consumables................................................................................ 28

Step 1

Setting Up the Machine

Install the Drum Unit
1
Assembly

Put the drum unit assembly into the
machine.

Close the front cover of the machine.

Do NOT connect the interface cable.
Connecting the interface cable is
done when installing the driver.

Open the front cover of the machine.

Front Cover

Unpack the drum unit assembly.

Gently rock it from side to side several times
to distribute the toner evenly inside the
assembly.

Put paper in the paper tray.
Check that the paper is flat in the tray and
below the maximum paper mark.

Windows®
Parallel

Windows®
USB

Pull the paper tray completely out of the
machine.

While pressing the paper guide release
lever, slide the adjusters to fit the paper
size. Check that the guides are firmly in the
slots.

Windows®
Optional Wireless
Network

For Legal size paper, press in the inside
latches and pull out the back of the paper
tray.

Windows
NT® 4.0
Parallel

Maximum paper mark

Put the paper tray firmly back in to the
machine and unfold the output tray support
flap before you use the machine.
Macintosh®
USB

Fan the stack of paper well to avoid paper
jams and misfeeds.

Macintosh®
Optional Wireless
Network

Setting Up
the Machine

Load Paper in the Paper
2
Tray

For details on supported paper specifications,
see “About paper” in Chapter 1 of the User’s
Guide.

Step 1

Setting Up the Machine

3 Install the Power Cord
Do not connect the Parallel or USB
cable yet.

4
1
2

Make sure that the power switch is off.
Connect the AC power cord to the machine.

Selecting Your
Language (Canada Only)
Press Menu.
Press the

to select

1.General Setup.

Press Set.

Press the

to select

0.Local Language.

Press Set.

to select your language
Press the
or
(English or Français), and then press
Set.

Local Language
English

5
Plug the AC power cord into an AC outlet.
Turn the power switch on.

Press Stop/Exit.

5 Setting the LCD Contrast
You can change the contrast to help the LCD look
lighter or darker.

Press Menu and
or
1.General Setup.
Press Set.

Press

to select

to select 5.LCD Contrast.

General Setup
5.LCD Contrast
Press Set.

Press
or
Press Set.

Press Stop/Exit.

to select Light or Dark.

Macintosh®
Optional Wireless
Network

Macintosh®
USB

Windows®
Optional Wireless
Network

Windows
NT® 4.0
Parallel

Windows®
Parallel

Continue to Step 2,
Installing the Drivers & Software

7
Windows®
USB

Setting Up
the Machine

Step 2

Installing the Drivers & Software

Supplied CD-ROM “MFL-Pro Suite”
The CD-ROM includes the following items:
Install MFL-Pro Suite
You can install the MFL-Pro Suite and multifunction
drivers.
Install Optional Applications
You can install additional MFL-Pro Suite software
utilities.
Documentation*1
View the User’s Guide and other documentation in
PDF format (Viewer included).
On-Line Registration
You will be pointed to the Brother Product Registration
Web page for quick registration of your machine.
MFL-Pro Suite includes Printer Driver, Scanner
Driver, ScanSoft® PaperPort® 9.0SE,
ScanSoft® OmniPage® and True Type® fonts.
PaperPort ® 9.0SE is a document management
application for viewing scanned documents.
ScanSoft ® OmniPage®, which is integrated
into PaperPort ® 9.0SE, is an OCR application
that converts an image into text and inserts it
into your default word processor.

Brother Support
View contact information for Brother Customer
Service and how to locate a Brother Authorized
Service Center.
Repair MFL-Pro Suite
If you experience errors while installing the MFL-Pro
Suite, you can use this function to automatically repair
and re-install the software.

Start Here OS 9.1-9.2
You can install the printer driver, scanner driver and
Presto!® PageManager® for Mac OS® 9.1 - 9.2.
Start Here OSX
You can install the printer driver, scanner driver and
Presto!® PageManager® for Mac OS® 10.2.4 or
greater.
Readme.html
You can get important information and
troubleshooting tips.
Documentation*1
View the User’s Guide and other documentation in
PDF format.
Brother Solutions Center
You can access the Brother Solutions Center, a Web
site offering information about your Brother product
including FAQs, User’s Guides, Driver updates and
Tips for using your machine.
*1 The User’s Guide on the CD-ROM includes the
Software User’s Guide for features available
when connected to a computer (e.g. Printing and
scanning).
8

On-Line Registration
You will be pointed to the Brother Product Registration
Web Page for quick registration of your machine.

Step 2

Installing the Drivers & Software
Setting Up
the Machine

Follow the instructions on this page for your operating system and interface cable.
For the latest drivers and to find the best solution for your problem or question, access the
Brother Solutions Center directly from the driver or go to http://solutions.brother.com

Windows®
USB

USB Interface Cable Users .......................................... Go to page 10
(For Windows® 98/98SE/Me/2000 Professional/XP)

Windows®
Parallel

Parallel Interface Cable Users ..................................... Go to page 13
(For Windows® 98/98SE/Me/2000 Professional/XP)

Windows®
Optional Wireless
Network

Windows
NT® 4.0
Parallel

Windows NT® Workstation Version 4.0 Users........... Go to page 16
(For Parallel Interface Cable Users)

Optional NC-2200w Users............................................ Go to page 18
(External Wireless Print/Scan Server)

Macintosh®
Optional Wireless
Network

Macintosh®
USB

USB Interface Cable Users
■ For Mac OS® 9.1 to 9.2 ............................................. Go to page 20
■ For Mac OS® X 10.2.4 or greater ............................. Go to page 22

Optional NC-2200w Users
■ For Mac OS® X 10.2.4 or greater ............................. Go to page 25

Step 2

Installing the Drivers & Software

For USB Interface Cable Users
(For Windows® 98/98SE/Me/2000 Professional/XP)
Make sure that you have completed the instructions from Step 1 “Setting Up
the Machine” on pages 4 - 6.
Please close any applications running before
installing the MFL-Pro Suite.

After reading and accepting the ScanSoft®
PaperPort® 9.0SE License Agreement, click
Yes.

The installation of PaperPort® 9.0SE will
automatically start and is followed by the
installation of MFL-Pro Suite.

When the Brother MFL-Pro Suite Software
License Agreement window appears, read
the agreement, then click Yes if you agree
to its terms.

Select Local Connection, and then click
Next.
The installation will continue.

Turn off and unplug the machine from the
AC outlet and disconnect it from your
computer, if you already connected an
interface cable.

Turn on your computer.
(For Windows® 2000 Professional/XP, you
must be logged on with Administrator
rights.)

Insert the supplied CD-ROM for Windows®
into your CD-ROM drive. If the model name
screen appears, select your machine. If the
language screen appears, select your
language.

The CD-ROM main menu will appear.
Click Install MFL-Pro Suite.

If this window does not appear, use
Windows® Explorer to run the setup.exe
program from the root directory of the Brother
CD-ROM.

Setting Up
the Machine

When this screen appears, connect the
USB interface cable to your PC, and then
connect it to the machine.

Plug in the power cord and turn on the
machine.
Windows®
USB

(For Windows® XP)

It will take a few seconds for the installation
screen to appear.
The installation of the Brother drivers will
automatically start. The screens appear one
after another, please wait, it will take a few
seconds for all the screens to appear.

(For Windows® 98/98SE/Me/2000)

DO NOT try to cancel any of the
screens during this installation.

When the On-Line Registration screen is
displayed, make your selection and follow
the on-screen instructions.

Installing the Drivers & Software

Brother recommends that you connect the
machine directly to your computer.

DO NOT connect the machine to a
USB port on a keyboard or a nonpowered USB hub.

Continued ...

Step 2

Installing the Drivers & Software

For USB Interface Cable Users
(For Windows® 98/98SE/Me/2000 Professional/XP)

Click Finish to restart your computer.
(After restarting the computer, for
Windows® 2000 Professional/XP, you must
be logged on with Administrator rights.)

If the installation is unsuccessful, try installing
again using Repair MFL-Pro Suite from the
CD-ROM main menu.
Select Repair MFL-Pro Suite and follow the
instructions on the screen.

The MFL-Pro Suite, Brother Printer
Driver and Scanner driver have been
installed and the installation is now
complete.

Setting Up
the Machine

For Parallel Interface Cable Users
(For Windows® 98/98SE/Me/2000 Professional/XP)
Make sure that you have completed the instructions from Step 1 “Setting Up
the Machine” on pages 4 - 6.
After reading and accepting the ScanSoft®
PaperPort® 9.0SE License Agreement, click
Yes.

The installation of PaperPort® 9.0SE will
automatically start and is followed by the
installation of MFL-Pro Suite.

When the Brother MFL-Pro Suite Software
License Agreement window appears, read
the agreement, then click Yes if you agree
to its terms.

Select Local Connection, and then click
Next.
The installation will continue.

Turn on your computer.
(For Windows® 2000 Professional/XP, you
must be logged on with Administrator
rights.)

Insert the supplied CD-ROM for Windows®
into your CD-ROM drive. If the model name
screen appears, select your machine. If the
language screen appears, select your
language.

The CD-ROM main menu will appear.
Click Install MFL-Pro Suite.

Windows®
Parallel

Turn off and unplug the machine from the
AC outlet and disconnect it from your
computer, if you already connected an
interface cable.

Installing the Drivers & Software

Windows®
USB

Please close any applications running before
installing the MFL-Pro Suite.

If this window does not appear, use
Windows® Explorer to run the setup.exe
program from the root directory of the Brother
CD-ROM.

Continued ...

Step 2

Installing the Drivers & Software

For Parallel Interface Cable Users
(For Windows® 98/98SE/Me/2000 Professional/XP)

When this screen appears, connect the
parallel interface cable to your PC, and then
connect it to the machine.

Plug in the power cord and turn on the
machine.

For Windows® 98/98SE/Me/2000
Professional users, click Next.

(For Windows® XP)

(For Windows® 98/98SE/Me/2000)

For Windows® XP users, wait for a while
since the installation of the Brother drivers
will automatically start. The screens appear
one after another.

DO NOT plug in the power cord
before connecting the parallel
interface cable. It may cause
damage to your machine.

DO NOT try to cancel any of the
screens during this installation.

Brother recommends that you connect the
machine directly to your computer.

When the On-Line Registration screen is
displayed, make your selection and follow
the on-screen instructions.

Setting Up
the Machine

After the computer restarts, the installation
of the Brother drivers will automatically start.
Follow the instructions on the screen.
(For Windows® 2000 Professional/XP, you
must be logged on with Administrator
rights.)

For Windows® 2000 Professional users, if
the Digital Signature Not Found dialog
boxes appear, click Yes to install the driver.

Windows®
Parallel

When the following screen appears, click
Finish and wait as the PC restarts
Windows® and continues the installation.

Installing the Drivers & Software

If the installation is unsuccessful, try installing
again using Repair MFL-Pro Suite from the
CD-ROM main menu.
Select Repair MFL-Pro Suite and follow the
instructions on the screen.

The MFL-Pro Suite, Printer driver and
Scanner driver have been installed and
the installation is now complete.

Step 2

Installing the Drivers & Software

For Windows NT® Workstation Version 4.0 Users
Make sure that you followed the instructions from Step 1 “Setting Up the
Machine” on pages 4 - 6.
Please close any applications running before
installing the MFL-Pro Suite.

Insert the Supplied CD-ROM for Windows®
into your CD-ROM drive. If the model name
screen appears, select your machine. If the
language screen appears, select your
language.

The CD-ROM main menu will appear.
Click Install MFL-Pro Suite.

Turn on your computer.
You must be logged on with Administrator
rights.
DO NOT plug in the power cord
before connecting the parallel
interface cable. It may cause
damage to your machine.

Connect the parallel interface cable to your
computer, and then connect it to the
machine.

If this window does not appear, use
Windows® Explorer to run the setup.exe
program from the root directory of the
Brother CD-ROM.

After reading and accepting the ScanSoft®
PaperPort® 9.0SE License Agreement, click
Yes.

The installation of PaperPort® 9.0SE will
automatically start and is followed by the
installation of MFL-Pro Suite.

Brother recommends that you connect the
machine directly to your computer.

Plug in the power cord and turn on the
machine.

Setting Up
the Machine

Select Local Connection, and then click
Next.
The installation will continue.

When the following screen appears, click
Finish and wait as the PC restarts Windows
and continues the installation.
(You must be logged on with Administrator
rights.)

If the installation is unsuccessful, try installing
again using Repair MFL-Pro Suite from the
CD-ROM main menu.
Select Repair MFL-Pro Suite and follow the
instructions on the screen.

The MFL-Pro Suite, Printer driver and
Scanner driver have been installed and
the installation is now complete.

When the On-Line Registration screen is
displayed, make your selection and follow
the on-screen instructions.

Windows
NT® 4.0
Parallel

When the Brother MFL-Pro Suite Software
License Agreement window appears, read
the agreement, then click Yes if you agree
to its terms.

Installing the Drivers & Software

Step 2

Installing the Drivers & Software

For Optional NC-2200w Users
(For External Wireless Print/Scan Server Users)
Make sure that you followed the instructions from Step 1 “Setting Up the
Machine” on pages 4 - 6.

Before installation, read the Quick Setup
Guide for NC-2200w External Wireless
Print/Scan Server and follow the instruction.

If you are using Personal Firewall software,
disable it. Once you are sure that you can
print, re-start your Personal Firewall
software. Close any applications running
before installing the MFL-Pro Suite.

Plug in the power cord and turn on the
machine.

The CD-ROM main menu will appear.
Click Install MFL-Pro Suite.

If this window does not appear, use
Windows® Explorer to run the setup.exe
program from the root directory of the Brother
CD-ROM.

Turn on your computer.
(For Windows® 2000 Professional/XP/
Windows NT® 4.0, you must be logged on
with Administrator rights.)

Insert the supplied CD-ROM for Windows®
into your CD-ROM drive. If the model name
screen appears, select your machine. If the
language screen appears, select your
language.

After reading and accepting the ScanSoft®
PaperPort® 9.0SE License Agreement, click
Yes.

The installation of PaperPort® 9.0SE will
automatically start and is followed by the
installation of MFL-Pro Suite.

When the Brother MFL-Pro Suite Software
License Agreement window appears, read
the agreement, then click Yes if you agree
to its terms.

Setting Up
the Machine

The installation of the Brother drivers will
automatically start. The installation screens
appear one after another. Please wait, it will
take a few seconds for all the screens to
appear.
DO NOT try to cancel any of the
screens during this installation.

When the On-Line Registration screen is
displayed, make your selection and follow
the on-screen instructions.

When the following screen appears, click
Finish and wait as the PC restarts Windows
and continues the installation.
(For Windows® 2000 Professional/XP/
Windows NT® 4.0, you must be logged on
with Administrator rights.)

If the machine is configured for your
network, select your machine from the list
and then click Next.

The MFL-Pro Suite, Network Printer
driver, Network Scanner driver have
been installed and the installation is
now complete.
This window will not appear if there is only
one of this Brother model connected on the
network, it will be selected automatically.

If the machine is not yet configured for use
on your network, the Configure IP Address
window will appear. Enter the IP address
information appropriate to your network by
following the on-screen instructions.

■ For Network installations, the Repair
MFL-Pro Suite selection from the main
menu is not supported.
■ Network Scanning is not supported in
Windows NT® 4.0.

Windows®
Optional Wireless
Network

Select Network Connection and then click
Next.

Installing the Drivers & Software

Step 2

Installing the Drivers & Software

For USB Interface Cable Users

For Mac OS® 9.1 to 9.2
Make sure that you have completed the instructions from Step 1 “Setting Up
the Machine” on pages 4 - 6.

Turn off and unplug the machine from the
AC outlet and disconnect it from your
Macintosh®, if you already connected an
interface cable.

2
3

Turn on your Macintosh®.

Double-click the Start Here OS 9.1-9.2 icon
to install the printer and scanner drivers. If
the language screen appears, select your
language.

Click MFL-Pro Suite to install.

Follow the on-screen instructions, and
restart your Macintosh®.

Connect the USB interface cable to your
Macintosh®, and then connect it to the
machine.

Insert the supplied CD-ROM for Macintosh®
into your CD-ROM drive.

DO NOT connect the machine to a
USB port on a keyboard or a non
powered USB hub.

Plug in the power cord and turn on the
machine.

Setting Up
the Machine

Click the Brother Laser icon.
On the right side of the Chooser, select the
machine to which you want to print.
Close the Chooser.

To install Presto!® PageManager®, click the
Presto! PageManager icon and follow the
on-screen instructions.

You can easily scan, share and organize
photos and documents using Presto!®
PageManager®.

Presto!® PageManager® has been
installed and the installation is now
complete.

The MFL-Pro Suite, Printer driver and
Scanner driver have been installed.
The ControlCenter2.0 is not supported in Mac
OS® 9.1 to 9.2.

USB

Installing the Drivers & Software

From the Apple® menu, open the Chooser.

Macintosh®

Step 2

Installing the Drivers & Software

For USB Interface Cable Users

For Mac OS® X 10.2.4 or greater
Make sure that you have completed the instructions from Step 1 “Setting Up
the Machine” on pages 4 - 6.
For Mac OS® X 10.2.0 to 10.2.3 user, please
upgrade to Mac OS® X 10.2.4 or greater.
(The latest information for Mac OS® X, please
visit at: http://solutions.brother.com)

Click MFL-Pro Suite to install.

Follow the on-screen instructions, and
restart your Macintosh®.

After the DeviceSelector window appears,
connect the USB interface cable to your
Macintosh® and then to the machine.

Disconnect the machine from the power
socket and from your Macintosh®, if you
already connected an interface cable.

2
3

Turn on your Macintosh®.

Double-click the Start Here OSX icon to
install the printer driver, Scanner driver and
Remote Setup program. If the language
screen appears, select your language.

Insert the supplied CD-ROM for Macintosh®
into your CD-ROM drive.

The DeviceSelector window will not appear if
you have also connected a USB interface
cable to the machine before restarting your
Macintosh®or if you are overwriting a
previously installed version of the Brother
software. If you encounter this problem
continue with the installation skipping step 9
and then see the Software User’s Guide for
details on selecting which machine the
ControlCenter2.0 will connect with.

Setting Up
the Machine

DO NOT connect the machine to a
USB port on a keyboard or a nonpowered USB hub.

Open the Utilities folder.

Open the Printer Setup Utility icon.

Plug in the power cord and turn on the
machine.

Click Add.

Select USB.

Select USB and then click OK.

Macintosh®

Select Applications from the Go menu.

Continued ...

USB

For Mac OS® X 10.2.x users, open Print
Center icon.

Installing the Drivers & Software

Step 2

Installing the Drivers & Software

For USB Interface Cable Users

Select DCP-XXXX (XXXX is your model
name), and then click Add.

Select Quit Printer Setup Utility from the
Printer Setup Utility menu.

To install Presto!® PageManager®, click the
Presto! PageManager icon and follow the
on-screen instructions.

When Presto! ® PageManager® is installed
OCR capability is added to the Brother
ControlCenter2.0. You can also easily scan,
share, and organize photos and documents
using Presto!® PageManager®.

Presto!® PageManager® has been
installed and the installation is now
complete.
The MFL-Pro Suite, Printer driver,
Scanner driver and ControlCenter2.0
have been installed.

Setting Up
the Machine

For Optional NC-2200w Users
(For External Wireless Print/Scan Server Users)

For Mac OS® X 10.2.4 or greater
Make sure that you have completed the instructions from Step 1 “Setting Up
the Machine” on pages 4 - 6.

Before installation, read the Quick Setup
Guide for NC-2200w External Wireless
Print/Scan Server and follow the instruction.

2
3

Turn on your Macintosh®.

Double-click the Start Here OSX icon to
install the printer driver and Remote Setup
program. If the language screen appears,
select your language.

After the DeviceSelector window appears,
select Network and then click OK.

8
Click MFL-Pro Suite to install.

Follow the on-screen instructions, and
restart your Macintosh®.

Macintosh®

Click Browse.

USB

The DeviceSelector window will not appear if
you have also connected a USB interface
cable to the machine before restarting your
Macintosh®or if you are overwriting a
previously installed version of the Brother
software. If you encounter this problem
continue with the installation skipping steps 7
to 9 and then see the Software User’s Guide
for details on selecting which machine the
ControlCenter2.0 will connect with.

Installing the Drivers & Software

Insert the supplied CD-ROM for Macintosh®
into your CD-ROM drive.

Optional Wireless
Network

Macintosh®

Continued ...

Step 2

Installing the Drivers & Software

For Optional NC-2200w Users
(For External Wireless Print/Scan Server Users)

Select your model name, and then click OK.
Click OK again to close the
DeviceSelector.

Plug in the power cord and turn on the
machine.

Open the Printer Setup Utility icon.

For Mac OS® X 10.2.x users, open Print
Center icon.

Click Add.

Make the selection shown below.

Select Brother DCP-XXXX (XXXX is your
model name) and then click the Add button.

Select Applications from the Go menu.

Open the Utilities folder.

Setting Up
the Machine

Select Quit Printer Setup Utility from the
Printer Setup Utility menu.

To install Presto!® PageManager®, click the
Presto! PageManager icon and follow the
on-screen instructions.

When Presto!® PageManager® is installed
OCR capability is added to the Brother
ControlCenter2.0. You can also easily scan,
share, and organize photos and documents
using Presto!® PageManager®.

Optional Wireless
Network

Presto!® PageManager® has been
installed and the installation is now
complete.

Macintosh®

Installing the Drivers & Software

The MFL-Pro Suite, Printer driver,
Scanner driver and ControlCenter2.0
have been installed.

■ Options and Consumables
Options
The machine has the following optional accessories. You can expand the capabilities of the
machine by adding these items.
External Wireless Print/Scan Server

External Print Server

NC-2200w

NC-2100p

If you are going to connect the machine to your wireless
network, purchase the optional Wireless print/scan server
(802.11b). The NC-2200w can be connected to the USB
interface port of your machine.
For more information, visit http://solutions.brother.com.

If you are going to connect the machine to your Ethernet
network, buy the optional Network device. The NC-2100p can
be connected to the parallel interface port of your machine.
For more information, visit http://solutions.brother.com.

Replacement Consumables
When the time comes to replace consumables, an error message will be indicated on the LCD.
For more information about the consumables for your printer, visit http://solutions.brother.com
or contact your local Brother re-seller.

Drum Unit

Toner

DR-350

TN-350

Trademarks
The Brother logo is a registered trademark of Brother Industries, Ltd.
Brother is a registered trademark of Brother Industries, Ltd.
Multi-Function Link is a registered trademark of Brother International Corporation.
© 2005 Brother Industries, Ltd. All rights reserved.
Windows, Microsoft and Windows NT are registered trademarks of Microsoft in the U.S. and other countries.
Macintosh, QuickDraw, iMac and iBook are trademarks or registered trademarks of Apple Computer, Inc.
Postscript and Postscript Level 3 are registered trademarks or trademarks of Adobe Systems Incorporated.
PaperPort and OmniPage are registered trademarks of ScanSoft, Inc.
Presto! PageManager is a registered trademark of NewSoft Technology Corporation.
Each company whose software title is mentioned in this manual has a Software License Agreement specific to its
proprietary programs.
All other brand and product names mentioned in this manual are registered trademarks of their respective
companies.

Compilation and Publication
Under the supervision of Brother Industries Ltd., this manual has been compiled and published, covering the latest
product descriptions and specifications.
The contents of this manual and the specifications of this product are subject to change without notice.
Brother reserves the right to make changes without notice in the specifications and materials contained herein and
shall not be responsible for any damages (including consequential) caused by reliance on the materials presented,
including but not limited to typographical and other errors relating to the publication.
This product is designed for use in a Professional Environment.
©2005 Brother Industries, Ltd.

USA/CAN

Brother Dcp 8020 Quick Start Guide ALL_DCP_QSG_US

Brother-Dcp-7020-Quick-Start-Guide brother-dcp-7020-quick-start-guide

DCP-8020 QSG_DCP_8020_EN_298

Navigation menu

Versions of this User Manual:

Views

Navigation