Brother Dh4 B980 Users Manual S91980 302
Brother-Db2-B797-Owner-S-Manual brother-db2-b797-owner-s-manual
Dh4-B980 Instructions DH4-B980 INSTRUCTIONS DH4-B980 INSTRUCTIONS BROTHER a.teamworksales.com
Rh-9800 Instructions RH-9800 INSTRUCTIONS RH-9800 INSTRUCTIONS BROTHER a.teamworksales.com
DH4-B980 to the manual 87392bf9-21de-422b-b248-9a00b5c81dc1
2015-01-25
: Brother Brother-Dh4-B980-Users-Manual-213499 brother-dh4-b980-users-manual-213499 brother pdf
Open the PDF directly: View PDF
Page Count: 66
- COVER-A
- PL
- CONTENTS
- 1. NAMES OF EACH PART
- 2. SPECIFICATIONS
- 3. INSTALLATION
- 3-1. Table processing diagram
- 3-2. Installing the motor
- 3-3. Installing the machine head
- 3-4. Installing the oil container
- 3-5. Installing the spool stand
- 3-6. Tightening the V-belt
- 3-7. Installing the control box
- 3-8. Installing the air unit and the valve assembly
- 3-9. Connecting the ground wires and the wirings
- 3-10. Connecting the air tubes
- 3-11. Installing the air hoses
- 3-12. Connecting the power cord
- 4. LUBRICATION
- 5. CORRECT USE
- 6. USING THE OPERATION PANEL AND FRONT PANEL
- 6-1. Panel button and switch names
- 6-2. Selecting a program number
- 6-3. Changing the mode
- 6-4. Changing the cutting timing
- 6-5. Setting a program
- A.Setting the sewing speed
- B.Setting the shape of the eyelet
- C.Setting the buttonhole length
- D.Setting the tacking length
- E.Setting the offset
- F. Setting the stitch pitch
- G. Setting the number of eyelet stitches
- H. Setting the cutting space
- I. Setting the knife position compensation
- P1. Setting X correction
- P2. Setting Y correction
- P3.Setting θ1 correction
- P4. Setting θ 2 correction
- 6-6. Using the memory switch
- 6-7. List of error codes
- 7. SEWING
- 7-1. Using the EMERGENCY STOP switch
- 7-2. Sewing
- 7-3. Adjusting the thread tension
- 7-4. Needle and knife position
- 7-5. Using the production counter
- 7-6. Using a cycle program
- 7-7. Setting the feed bracket to the front position
- 7-8. Switching between single-pedal and dual-pedal operation (Switching the foot controller)
- 7-9. Using feed mode
- 7-10. Using manual mode
- 7-11. Changing the cycle program counter
- 7-12. Setting the number of home position cycles
- 7-13. Returning to the home position
- 8. CLEANING AND MAINTENANCE
- 9. STANDARD ADJUSTMENTS
- 9-1. Adjusting the height of the spreader and looper
- 9-2. Adjusting the needle and looper timing
- 9-3. Adjusting the loop stroke
- 9-4. Adjusting the height of the needle bar
- 9-5. Adjusting the clearance between the looper and needle
- 9-6. Adjusting the needle guard
- 9-7. Adjusting the spreader mounting positions
- 9-8. Adjusting the spreader timing
- 9-9. Adjusting the needle racking width (stitch width)
- 9-10.Changing the knife cutting length (Replacing the cutting block)
- 9-11. Adjusting the contact between the knife and the cutting block
- 9-12. Replacing the knife
- 9-13. Adjusting the cutting pressure
- 9-14. Adjusting the cloth opening amount
- 9-15. Adjusting the trimming of the upper thread
- 9-16. Adjusting the trimming of the lower thread and gimp
- 9-17. Adjusting the gimp length after trimming (-02)
- 9-18. Lower thread presser (-02)
- 9-19. Sub presser (-02)
- 10. SUMMARY OF DIP SWITCHES
- 11. TROUBLESHOOTING
- COVER-B