Brother P Touch Pt 1090 Users Manual
PT-1090 to the manual 2bda6d38-67d9-4e2d-8e74-860f453ecfaa
2015-01-25
: Brother Brother-P-Touch-Pt-1090-Users-Manual-212984 brother-p-touch-pt-1090-users-manual-212984 brother pdf
Open the PDF directly: View PDF .
Page Count: 2
Download | |
Open PDF In Browser | View PDF |
GETTING STARTED INTRODUCTION 1090 User’s Guide PREPARATION With the PT-1090 you can create labels for any application. Select from the many frames, character sizes and styles to design custom labels. In addition, the variety of tape cartridges allows you to print labels with different widths and colours. Read this guide carefully before starting and keep the guide in a handy place for future reference. The contents of this guide and the specifications of this product are subject to change without notice. A B English A: Cassette cover B: Tape cutter lever • Open the cassette cover by pressing the above indicated area at the top end of the machine. Printed in China LW4118001 A B SAFETY PRECAUTIONS WARNING Follow these guidelines to avoid the risk of fire, burn, injury, electric shock, damage, overheating, abnormal odours or smoking. • Always use the specified voltage and the suggested AC adapter “AD-24ES/AD-5000ES” (For Australia, New Zealand Only) to prevent any damage or failure. • Unplug the adapter cord immediately and stop using the P-touch labeller during an electric storm. • Do not use the P-touch labeller/adapter in places of high humidity such as bathrooms. Do not get the P-touch labeller/adapter/power plug wet such as by handling them with wet hands or spilling beverages onto it. • Do not overload the adapter cord. Do not forcibly bend or pull the adapter cord. Do not damage or place heavy objects on the adapter cord or plug. • Hold the plug when disconnecting the adapter cord from the power outlet. Do not use an outlet that is loose. • Do not swallow the cutter stopper. • Do not disassemble or modify the P-touch labeller/ adapter/batteries. Do not use metallic objects such as tweezers or a pen when changing the batteries. Do not throw the batteries into fire or expose to heat. • Disconnect the adapter, remove the batteries and stop using the P-touch labeller immediately if you notice abnormal odour, heat, discoloration, deformation or anything unusual while using or storing it. CAUTION Follow these guidelines to avoid personal injury, battery leakage, burn and heat • Do not touch the edge of the cutter or any metal part near the print head. • Remove the batteries and disconnect the adapter if you do not intend to use the P-touch labeller for an extended period of time. • Do not use old and new batteries together or mix alkaline batteries with other types. • Do not drop or hit the P-touch labeller/adapter. Do not press hard on the LCD display. • Do not put your finger between the covers when you close the cassette cover. GENERAL PRECAUTIONS • Depending on the location, material, and environmental conditions, the label may unpeel or become irremovable, the colour of the label may change or be transferred to other objects. Before applying the label, check the environmental condition and the material. • Do not use the labeller in any way or for any purpose not described in this guide. Doing so may result in accidents or damage to the machine. • Only use a soft, dry cloth to clean the labeller; never use alcohol or other organic solvents. • Use a cotton swab to clean the print head, never touch the print head. • Do not put any foreign objects into the tape exit slot or adapter etc. • Do not place the labeller/batteries/AC adapter in direct sunlight or rain, near heaters or other hot appliances, in any location exposed to extremely high or low temperatures (e.g. on the dashboard or in the back of your car), high humidity, or dusty locations. • Do not apply excessive pressure to the cutter lever. • Do not try to print if the cassette is empty as it will damage the print head. • Do not pull the tape while printing or feeding as it will damage the tape and the labeller. • Any data stored in memory will be lost due to failure or repair of the labeller, or if the battery expires and no adapter is connected. TROUBLESHOOTING Error messages Cause / remedy BATTERY! Invalid! No Text! The batteries are about to run out. Replace all batteries. - An invalid number is selected for Label length. - You tried to print a text file when there is no data stored in the memory. is pressed when no text is entered. - You tried to select [Copies], [Preview] or [Cable] when no text is entered. Line Limit! Insert 12 mm! No Cassette! - You tried to enter a third line by pressing . Note: Use either 9 mm or 12 mm wide tape when printing two lines. Tape cutter lever is pressed while the machine is printing. Note: Do not push the cutter lever while printing. The maximum number of characters (80 Characters for regular text, or 50 characters for DECO MODE) have already been entered. - The text length exceeds the selected Label length. - The text length exceeds 200 mm when “Label Length” is set to [Auto] in DECO MODE. - If the minimum label length 30mm is selected, some frame types (Leaf or Star) will not allow you to enter additional text. Frames can not be printed on 3.5 mm tape. Select to print with no frame or to cancel. Tape feeds after printing when [Chain Prt] is selected. Refer to ‘Set margin (tape margin)’. If the print head becomes too hot, the labeller stops printing and automatically starts to cool down. The cool down time will be displayed. Once the print head is cool, printing will continue automatically. Do not touch the labeller while cooling. Only 12 mm tape cassette is suitable for DECO MODE. Insert a cassette. Problem Possible solution The display stays blank after you have turned on the machine. - Check the batteries are correctly inserted. - The batteries could be weak, replace them. - Check that the optional “AD-24ES/AD-5000ES” (For Australia, New Zealand Only) is connected correctly. - The batteries are weak, replace all batteries. - Check that the batteries are inserted correctly. See ‘Set margin (tape margin)’ in this user's guide and select [Half] or [Narrow] to have smaller margins for your label. Refer to ‘RESETTING THE P-TOUCH’. Cutter Error Full! Text Limit! No Frame OK? OK to Feed? Cooling The power turns off when trying to print When the label is printed out, there is too much margin on both sides of the text. The machine has “locked up” (i.e., nothing happens when a key is pressed, even though the machine is on). All text and format settings need to be cleared to create a new label The machine does not print or printing is blurry. The settings and texts have cleared on their own. The tape does not feed properly or gets stuck inside the labeller To change the language setting A blank horizontal line appears through the printed label. Press Check that the tape cassette is inserted correctly. If the tape cassette is empty, replace it. Check that the cassette cover is properly closed. The batteries may be weak, replace them. When power is disconnected for more than two minutes, all texts, settings and any text files stored in the memory will be cleared. - Check that the end of the tape feeds under the tape guide. - The cutter lever is pressed while printing. Do not touch the cutter lever during printing. Refer to ‘INITIAL SETTINGS’. - There may be some dust on the print head. Remove the tape cassette and use a dry cotton swab to gently wipe the print head with an up-and-down motion. - The print head can be cleaned more easily if the optional print head cleaning cassette (TZ-CL3) is used. If the cutter blade becomes blunt after repetitive use and the tape cannot be cut cleanly, replace with a new cutter unit (stock no.TC-5) obtained from an authorized Brother reseller. Tape cassettes AC adapter Cutter unit Cleaning cassette See the included tape catalogue. “AD-24ES/AD-5000ES” (For Australia, New Zealand Only) TC-5 (replacement) TZ-CL3 CAUTION • Do not touch the cutter blade directly with your fingers. • Do not swallow the cutter stopper. A: Cutter blade B: Cutter stopper C: Print head • Insert six AAA alkaline batteries (LR03). • Make sure the + and – of the batteries are positioned correctly. Note: Only use new batteries. A A: Toothed wheel • Make sure that the end of the tape feeds under the tape guide. • If the ink ribbon in the cassette is loose, use your finger to turn the toothed wheel in the direction of the arrow on the cassette until there is no slack. and select [Txt&Format]. - ACCESSORIES C SPECIFICATIONS Dimensions (W × D × H) Weight Power supply Optional AC adapter Tape cassette 107.9 × 209.4 × 57.6 mm Approx. 315g Six AAA alkaline batteries (LR03) Model “AD-24ES/AD-5000ES” (For Australia, New Zealand Only) Brother TZ tape (width) 3.5 mm, 6 mm, 9 mm, 12 mm A A: Tape exit slot • • • • Insert a tape cassette. Make sure that the cassette snaps into place. Close the cassette cover. After you have installed the tape, feed the tape (see “Feed (tape feed)”) once and then push in the tape cutter lever to cut the tape. Note: Use only Brother TZ tapes with this machine. RESETTING THE P-TOUCH Reset the P-touch labeller if you want to initialize the settings or in case the labeller does not work properly. • Turn off the labeller. • Hold down and . • While holding and , press once to turn ON the labeller. • Release and . Note: The internal memory is reset, and all text, settings and stored files are cleared. PRINTING LABELS 5 4 3 6 7 1 2 8 21 9 20 10 11 12 19 18 13 17 14 16 15 INITIAL SETTINGS Display 1. Caps 2. Cursor 3. Size 4. Width 5. Style 6. Label length 7. Underline / Frame 1. Start your machine 3. Set the unit of measurement: mm [Unit] • Supply power by using the batteries or the optional AC adapter and press . 4. Set date (DD/MM/YY) and time (hh:mm) 2. Set the language [ Keyboard 8. DECO MODE 9. Print 10.Cursor keys 11.Back Space/Cancel 12.Function 13.Alphanumeric keyboard 14.Accent 15.Space 16.Symbol 17.Caps 18.Time/Date 19.Clear 20.Enter 21.Power [mm] Language] Example: Setting the date and time for 21 November 2009 10:30. [Time Date] [English / Español / Français / Hrvatski / Italiano / Magyar / Nederlands / Norsk / Polski / Português / Română / Slovenski / Slovenský / Suomi / Svenska / Türkçe / Čeština / Dansk / Deutsch] [Clock] [DD/01/10] Input “21” [21/MM/10] Input “11” [21/11/YY] Input “09” [hh:00] Input “10” [10:mm] Input “30” SETTINGS (LABEL DESIGNS) Underline/Frame Size [Undl/Frame] [Size] [Underline] [Large/Medium/Small] Display: 12 characters. Text buffer: maximum 80 characters. Adapter (optional) For memory back up it is recommended to use the batteries together with the optional AC adapter “AD-24ES/AD-5000ES” (For Australia, New Zealand Only). In addition to this setting, the text size automatically adjusts to the tape width. The actual printed size varies with tape width. Width Note: - 8 Frames are available. Refer to table ( ) on the enclosed insertion sheet. - Frames cannot be printed on 3.5 mm tape. [Width] 1 Underline 2 Round [Normal/× 2/× 1/2] 3 Leaf 4 Tile 5 Star 6 Heart 7 Bubble 8 Flower Style [Style] [Normal/Bold/Outline/Shadow/Italic/ I+Bold/I+Outline/I+Shadow/Vertical/] ENTERING TEXT Upper/Lower case Upper/Lower case: Press - [Basic/Pictograph] [. , : ; " ' •] - [Full] to switch ON/OFF. Symbols - Basic/Pictograph: For entering symbols. • Refer to the symbol table (Basic: / Pictograph: ) on the enclosed insertion sheet. • The rows of symbols (A to L) in the Pictograph table can be selected by pressing the corresponding character. • To go to the next group, press (again). Print List: For printing all symbols in the pictograph table. [Print List] [Half] ABC 25 mm - DECO MODE Full/Half/Narrow: For leaving equal margins on both sides of the text. : 12 mm 25 mm [Narrow] ABC : ABC 4 mm 4 mm 12 mm Chain print: For creating labels containing text in various styles and formats. 1. When the message “OK to Feed?” appears after the label is printed, press . 2. Clear the text, enter the text for the next label, and then press . 3. Repeat steps 1 and 2 for each additional label. 4. When the message “OK to Feed?” appears after the last label is printed, press . 5. After the tape is fed, press the cutter lever to cut off the chain of labels. [Print OK?] [Ok to Feed?] Two line text • Enter the text for the first line and press . • Enter the text for the second line and press . Note: Do not press after the second line of text otherwise “Line Limit!” error message will appear. Note: Use either 9 mm or 12 mm wide tape when printing two lines of text. Accented characters • Type a character and press . • Choose an accented character with or and press . For a list of available characters, refer to table ( ) on the enclosed insertion sheet. ABC ABC DEF Making Copies [Copies] [Set 1-9?] You can print up to 9 copies of the label. When you want to print the same labels with the narrowest margins, set margin to Narrow. TIME / DATE Clear By pressing , the characters will be deleted one by one. You can add the time and date with one touch on the button. Eight formats are available. • To delete current text and settings Add Time / Date [Txt&Format] [abc_ ] [abc 21/11/09_ ] • To delete current text only [Text Only] [Time Date] Up to nine labels can be saved and recalled for printing at a later date. It is also possible to edit and overwrite a stored label. Example: (design/format 10) Save [File] [Save] [Auto/30 mm-200 mm] Note: Only the text can be previewed, not the size, font or any additional features. Feed (tape feed) [Feed] . Set margin (tape margin) [Margin] [Full/Half/Narrow/Chain Prt] The following formats are available. Format D/M/Y D/M/Y hm D.M.Y D.M.Y hm Y-M-D Y-M-D hm M/D/Y M/D/Y hm 21 November 2009 15:30 21/11/09 21/11/09 15:30 21.11.09 21.11.09 15:30 09-11-21 09-11-21 15:30 11/21/09 11/21/09 15:30 Changing the clock setting • Refer to INITIAL SETTINGS, step 4. Print [File] BROTHER [Print/Quit] [Print] • Some designs contain a check mark next to them in the table. If selected, your machine may automatically stop printing if the print head becomes too hot, allowing it to cool down. The cooling time will be displayed. Once the print head is cool, printing will continue automatically. • Depending on the format you have selected, the entire contents of your text may not be printed. • The template formats cannot be changed. • The highlighted symbols on the enclosed insertion sheet are available in DECO MODE. • To clear all text, press . “Clear?” appears. Press to clear or to cancel. • When you access DECO MODE, the most recently printed text and label length will be recalled. • Press to return to the previous step. • Press to change the “Label Length” setting back to [Auto]. • To exit DECO MODE, press until the display shows the text entry screen. Alternative: select [Quit] in the [Print]/[Quit] selection screen. Note: Printing DECO MODE designs is only available when using 12 mm wide tape cassettes. The maximum label length in DECO MODE is 200 mm. When [Auto] is selected, the machine will automatically adjust the length so that the text appears on the label one time. To create labels like the one shown below, follow these steps: Input up to 2 lines of text. [1-9] Open [File] [Open] [Print OK?] SHORTCUTS In addition to the basic steps to search for a function, the labeller also provides the user with function shortcuts - making it easy to jump to a frequently used function. • Press and then the shortcut key. • Press to confirm. Shortcut keys and functions Key Function Key File Size Cable Width Preview Style Feed Undl/Frame Unit Label Length Time/Date Copies Margin Contact Information ABC 159 Print the label with the Cable function, and wrap around cable. Always use Brother Flexible ID tape when wrapping. Refer to the manual enclosed with Flexible ID tape about the recommended conditions for use. Label length and margin settings will automatically default to [Auto] when Cable Labelling. Function Language See the website www.brother.com/ ABC 159 [1-9] Note: A message “Overwrite?” will appear if you try to store a label when there is already a label stored with that number. [Cable] [D/M/Y hm] [Preview] [1-9] [Design 10] [Format] Text preview Print • Press This function allows you to create unique labels by using built-in templates. For a list of available designs, refer to table ( ) on the enclosed insertion sheet. CABLE LABELLING Select a format PRINTING LABELS SAVING LABELS
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2009:09:22 15:05:30+09:00 Modify Date : 2009:09:22 15:09:32+09:00 Metadata Date : 2009:09:22 15:09:32+09:00 Producer : Acrobat Distiller 8.1.0 (Windows) Format : application/pdf Title : Creator : Document ID : uuid:2883d100-457c-4d11-9997-dbcb90f2a365 Instance ID : uuid:0c4e4d74-92de-4268-af37-314e21b6c4a0 Page Count : 2 Page Layout : SinglePage Warning : [Minor] Ignored duplicate Info dictionaryEXIF Metadata provided by EXIF.tools