Brother P Touch Pt 1290 Users Manual ManualsLib Makes It Easy To Find Manuals Online!
2014-12-12
: Brother Brother-P-Touch-Pt-1290-Users-Manual-119173 brother-p-touch-pt-1290-users-manual-119173 brother pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
Introduction With your PT-1290, you can create labels for any application. Select from the many frames, character sizes, widths and styles to design beautiful custom labels. In addition, the variety of tape cartridges available allows you to print labels with different widths and exciting colours. Read this manual carefully before starting and keep the manual in a handy place for future reference. Warning Follow these guidelines to avoid fire, burn, injury, electric shock, rupture, heat, abnormal odour and smoking. User’s Guide Products description Model number : P-touch : PT-1290 is in conformity with provisions of the Electromagnetic Compatibility Directive (2004/108/EC) and we declare compliance with the following standards : Harmonized standards applied: English EMC EN55022: 2006 + A1: 2007 Class B EN55024: 1998 + A1: 2001 + A2: 2003 EN61000-3-2: 2006 EN61000-3-3: 1995 + A1: 2001 + A2: 2005 Caution Follow these guidelines to avoid personal injury, battery leakage, burn and heat. The optional AC adapter AD-24ES also conforms with EN609501:2001+A11:2004 and follows the provisions of the Low Voltage Directive 2006/95/EC. Year in which CE marking was first affixed: 2009 Issued by Printed in China LW3860001A General Precautions • Depending on the location, material, and environmental conditions, the label may unpeel or become irremovable, the colour of the label may change or be transferred to other objects. Before applying the label, check the environmental condition and the material. • Do not use the P-touch in any way or for any purpose not described in this guide. Doing so may result in accidents or damage to the machine. • Use only Brother TZ tapes with this machine. Do not use tapes that do not have the mark. • Only use a soft, dry cloth to clean the machine; never use alcohol or other organic solvents. • Use a cotton swab to clean the print head; never touch the print head. • Do not put any foreign objects into the tape exit slot or AC adapter connector, etc. • Do not place the P-touch/battery/adapter in direct sunlight or rain, near heaters or other hot appliances, in any location exposed to extremely high or low temperatures (e.g. on the dashboard or in the back of your car), high humidity, or dusty locations. • Do not apply excessive pressure to the cutter lever. • Do not try to print if the cassette is empty; it will damage the print head. • Do not pull the tape while printing or feeding; it will damage the tape and machine. • Any data stored in memory will be lost due to failure or repair of the P-touch, or if the battery expires and no adapter is connected. • When power is disconnected for more than three minutes, all texts settings and any text files stored in the memory will be cleared. • Always use the specified voltage and the suggested AC adapter (AD-24ES) for this machine to prevent any damage or failure. • Unplug the adapter cord immediately and stop using the P-touch during an electrical storm. • Do not use the machine/AC adapter in places of high humidity such as bathrooms. • Do not overload the adapter cord. • Do not place heavy objects on, or damage the adapter cord or plug. Do not forcibly bend or pull the adapter cord. When disconnecting the adapter cord from the power outlet, always hold the plug. • Make sure that the plug is fully inserted in the power outlet. Do not use an outlet that is loose. • Do not swallow the cutter stopper. • Do not get the machine/AC adapter/adapter plug wet, such as by handling them with wet hands or spilling liquids on to them. • Do not disassemble or modify the P-touch/AC adapter/batteries. • Do not use metallic objects, such as tweezers or a metallic pen, when changing the batteries. • Do not throw the batteries into fire or expose to heat. • Disconnect the AC adapter, remove batteries immediately and stop using the machine if you notice abnormal odour, heat, discolouration, deformation or anything unusual while using or storing it. EC Declaration of Conformity Manufacturer Brother Industries, Ltd. 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan Plant Zhuhai Brother Industries Co., Ltd. 254 Gangchang Road, Gongbei, Zhuhai City S.E.Z. Guang Dong, CHINA Herewith declare that: 1290 • Do not drop or hit the P-touch/AC adapter. • Do not press hard on the LCD display. • Make sure you do not trap your fingers when closing the cassette cover. Safety Precautions • Do not touch the cutter blade or any metal parts near the print head. • Remove the batteries and disconnect the AC adapter if you do not intend to use the P-touch for an extended period of time. • Do not use old and new batteries together or mix alkaline batteries with other type batteries, or set the positive and negative end in the wrong position. : Brother Industries, Ltd. Quality Management Dept. Power Supply and Tape Cassette 1 2 3 Print head Tape cutter lever Cassette cover 4 End of tape Cutter blade Toothed Wheel Open the cassette cover by pressing the indicated area at the back of the machine. If a tape cassette is already installed, remove it by pulling it straight up. Also, if batteries are already installed, remove them. • Make sure that the power is turned off when replacing batteries or tape cassettes. Insert six new AAA alkaline batteries (LR03), making sure that their poles point in the correct directions. Always replace all six batteries at the same time using brand new ones of the same type. Insert a tape cassette, making sure that it snaps into place. Securely close the cassette cover, making sure that it snaps into place. • Make sure that the end of the tape feeds under the tape guides. • If the ink ribbon is loose, use your finger to wind the toothed wheel in the direction of the arrow on the cassette. • Use only Brother TZ tapes with this machine. After you have installed the tape, press + to feed the tape once and then push in the tape cutter lever to cut the tape. LCD Display & Keyboard 1 5 6 2 3 4 7 8 16 17 9 10 18 19 11 12 20 21 13 AC adapter socket Cutter Stopper Tape exit slot Tape guide NOTE When using optional AC adapter (AD-24ES) 1. Insert the small plug on the adapter cord into the AC adapter socket on the top end of the machine. 2. Insert the power plug into the nearest standard electrical outlet. For memory back up, we recommend using AAA alkaline batteries (LR03) together when using the AC adapter. Initial Settings 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Size Font Cursor Caps Width Style Underline/Frame Label Length Escape key Power key Function key Font keys Character keys Shift key 15. Caps key 16. Cursor key (Use with Shift key to go to start/ end of the text.) 17. OK key 18. Print/Feed key 19. Preview key 20. DECO MODE key 21. Backspace key 22. Enter key 23. Accent key 24. Symbol key 25. Space key 1 Start your machine. Supply power by using six AAA alkaline batteries (LR03) or the optional AC adapter, and then press 2 3 Set the unit of measurement. The default setting is [mm]. . [Unit] Set the language. [mm/inch] The default setting is [English]. [ [English/Español/Français/Hrvatski/Italiano/ Magyar/Nederlands/Norsk/Polski/ Português/Română/Slovenski/Slovenský/ NOTE . Language] NOTE • The machine automatically turns off if no keys are pressed within five minutes. • To cancel operations, press . Suomi/Svenska/Türkçe/Český/Dansk/ The LCD shows one row of 15 characters; however, the text that you enter can be up to 80 characters in length. Deutsch] . 22 23 24 14 25 14 15 Troubleshooting X Error message Message Message Cause/Remedy Battery Weak! The batteries are weak. Replace them with new ones. Check Battery! The installed batteries are running low. Invalid! • There is no text above the cursor when you selected [Numbering]. • Invalid character is selected for [Numbering]. • Invalid number is selected for [Tab Length] or [Label Length]. Full! Text Too Long! The text length exceeds the selected label length, Auto Format setting length and DECO MODE setting length. Printing on 3.5mm tape with invalid Frame No Frame OK? • is pressed when no text is entered. • You tried to select [Copies], [Numbering], [Mirror], or Text Preview when no text is entered. . • You tried to print a 2 line text with 3.5mm or 6mm tape installed. No Cassette! You tried to print a label with no cassette installed. Cutter Error! The tape cutter lever was used while printing. to print with no to cancel.) OK to Feed? Feeding tape after printing when [Chain print] is selected. Refer to “Setting Margin”. Cooling If the print head becomes too hot, your machine will stop printing and automatically start to cool down. The cool down time will be displayed. Once the print head is cool, printing will automatically continue. Do not touch the P-touch while cooling. • You tried to enter a 3rd line by pressing Line Limit! setting ON. (Select Frame, • You tried to print a text file when there is no data stored in the memory. No Text! Cause/Remedy The maximum number of characters (80 characters, for DECO MODE 50 characters) have already been entered. Insert 12mm! 12mm tape is required for DECO MODE. X What to do when... Problem The display stays blank after turning on the machine. Problem Solution • Check that the batteries are correctly inserted. • If the batteries are weak, replace them. • Check that the optional AD-24ES adapter is correctly connected. When the label is printed out, there is • See “Setting Margin” and select [Half] or [Narrow] to have smaller margins for your too much margin label. (space) on both sides of the text. The machine does • Check that the tape cassette has been not print, or the inserted correctly. printed characters • If the tape cassette is empty, replace it. are not formed • Check the cassette cover is properly closed. properly. • The batteries may be weak. Replace them. The settings and texts have cleared • When power is disconnected for more than three minutes, all texts, settings and any text on their own. files stored in the memory will be cleared. A blank horizontal • There maybe some dust on the print head. line appears Remove the tape cassette and use a dry through the printed cotton swab to gently wipe the print head with an up-and-down motion. label. The machine has “locked up” (i.e., nothing happens when a key is pressed, even though the machine is on.) Solution • Refer to “Resetting the P-touch”. The power turns off • The batteries may be weak. Replace them. when you try to • Check that the batteries are correctly inserted. print. The tape does not • Check that the end of the tape feeds under the tape guides. feed properly or the • The tape cutter lever was used while tape gets stuck printing. Do not touch the cutter lever during inside the machine. printing. How can I delete all text and format • Press + settings to create a [Text&Format]. new label? How can I change the language setting? and select • Refer to “Initial Settings”. Entering Text Printing Labels X Setting Font (Helsinki) or Label image (Helsinki) • Refer to the table of symbols (A) on the enclosed insertion sheet for a list of available symbols. • To go to the next group, press . (Bohemia) • To cancel operations, press Label image (Bohemia) Upper case ( ON) Lower case ( You can preview the text before printing. Example: Design 10 - / • Refer to the table of accented characters (B) on the enclosed insertion sheet for a list of available accented characters. OFF) X Text Preview . X Entering Accented Characters X Switching Upper Case/Lower Case • To cancel operations, press • The LCD shows the whole text and the label length (mm/inch), then returns to the original text. • Only the text can be previewed, not the font, style, size, underline/frame or any additional features. Move the cursor to where the second line starts and press + Bill Anderson ) ABC Company, Inc. [Margin] , the letters will be deleted one by one. Display Label image [Full]/[Half]/[Narrow] For leaving equal margins on both sides of the text. To delete all text and settings : + [Text&Format] X Entering Symbols ABC 25mm + Choose a symbol with : 25mm Narrow ABC 12mm : ABC 4mm 12mm 4mm [Chain Print] For creating a label containing text in various styles. 1. Enter text. [Text Only] and . press Half Full To delete text only : 2. Press , then [OK to Feed?] appears. 3. Press to enter more text. Press to feed and print. 1 Press ABC to select a function under column [A], and then press can also be selected with the shortcut keys listed under column [C]. ( 2 Use to select a setting listed under column [B], and then press Design [A] [B] + Size NOTE )) . [C] Label image Large*1 Size • Press . (The function to Medium • When [Half] or [Narrow] is set, feed the tape before using the cutter otherwise a part of the text may be cut off. Also, cut along the printed dots (:) with scissors so the text is centered in the label. • To print more than 1 copy of a label with minimum margin, set the margin to [Narrow] and select [Copies] in the [Print Options] menu. • Do not try to pull the tape since this may damage the tape cassette. X Printing Small • To prevent damage to the tape, do not touch the cutter lever while the message “Print” or “Feed” is displayed. • To cut off the label, push in the tape cutter lever on the upper-right corner of the machine. • Peel the printed label from backing and apply the label. Normal*1 Width Width x2 X Using Print Options ( x 1/2 Normal* + , then “Clear?” to cancel. to return to the previous step. • To exit DECO MODE, press until the display shows the text entry screen. • DECO MODE feature is only available when using 12mm wide tape cassettes. • The maximum label length is 200mm for DECO MODE. • When [Auto] is selected for “Label Length”, the label will automatically adjust to the correct size for printing the text one time. • Press Length” mode. to return to the [Auto] setting for “Label Saving Label Files X Memory ( + ) You can save your original labels on to your machine. Up to nine labels can be saved and recalled for printing at a later date. You can also edit and overwrite the stored label. ) You can print up to 9 copies of each label. • To print more than 1 copy of a label with minimum margin, set the margin to [Narrow] and select [Copies] for [Print Options] function. Bold Outline [Print Options] Shadow Style and to clear. Press [File] [Copies] 1 Style • To clear all text, press • When you access DECO MODE, your most recently printed DECO MODE text and label length will be recalled. ABC DEF (feed & cut) , use • The formats marked in column [C] of the insertion sheet's DECO format table can require cooling. If the print head becomes too hot, your machine will automatically stop printing and begin to cool down. Once the print head has cooled, printing will automatically continue. Do not touch the P-touch while cooling. • If you select a format that is one line (Design 1 - Design 9), only enter the text once. • Printing and formatting of entered text may depend on the template style you have selected. • The format of DECO MODE templates cannot be changed. • The highlighted symbols in the table of symbols (A) on the enclosed insertion sheet are available in DECO MODE. appears. Press Chain Print Designing Labels [Print OK?] NOTE [Full/Half/Narrow/Chain Print] . Use either 9mm or 12mm wide tape for two line text. [Auto/30-200mm] + X Setting Margin ( X To Clear By pressing [Design 10] X Feeding (Tape Feed) . • The order of accented characters differs by the selected LCD language. X Entering Two Lines of Text DECO MODE This function allows you to create unique labels by using some built-in templates. Refer to the DECO MODE format table (C) on the enclosed insertion sheet. To Save: [Save] To Print: [Print] To Open: [Open] [Copies] Italic • You can also select the number of copies by entering it with the Number keys. Italic Bold NOTE [Numbering] Italic Outl (Italic Outline) You can print many copies of the same text while increasing a selected number by 1 after each label is printed. Example: To print copies of a label containing a serial number (0123, 0124 and 0125) Italic Shadow If you try to store a label when there is already a label stored to that number, the message “Overwrite?” will appear. Press to save your new label. Press to cancel. Vertical Off*1 [Print Options] Underline [Numbering] Round • Select the highest number you wish to be printed when setting the number. Leaf Underline/Frame*2 Specifications [Mirror] Underline/Frame Tile [Print Options] Star [Mirror] • Use clear tape with [Mirror], so the labels can be read correctly from the opposite side when attached on glass, windows or other transparent surfaces. Clip Tab length Tab Length Label length Label Length • The cursor should be positioned where you set a tab. Auto*1/ 0-100mm*3 Auto*1/ 30-300mm*3 Off*1 Auto format Auto Format 485 g (without batteries and tape cassette) Power supply: Six AAA alkaline batteries (LR03) Optional AC adapter (AD-24ES) Tape cassette: Brother TZ tape (width) 3.5mm, 6mm, 9mm, 12mm Accessories Square Tab 159 × 157 × 61.7mm Weight: [Mirror Print?] Heart Tab Dimensions: (W x D x H) Resetting the P-touch You can reset the P-touch when you want to initialize the settings, or in the event the P-touch is not working properly. The tab is set with the specified length. The label is printed with the specified length. 1 — VHS Spine 140mm MiniDV Spine 42mm Audio Tape 89mm CD Case Spine 113mm File Tab 82mm Divider Tab 42mm *1 These are the default settings. To return to the default setting, press . *2 Frames can not be printed on 3.5mm tapes. *3 You can also select the length by entering the length with the number keys. To turn to [Auto], press 2 Turn off the P-touch and then while holding down and , press to turn the P-touch back on. Release and . The P-touch turns on with the internal memory reset. NOTE All text, settings and stored files are cleared. . Tape Cassettes: See the included “Tape Catalog”. AC Adapter: AD-24ES Cutter Unit: TC-5 (replacement) If the cutter blade becomes blunt after repetitive use and the tape cannot be cut cleanly, replace with a new cutter unit (stock no. TC-5) from an authorized Brother reseller. CAUTION • Do not touch the cutter blade directly with your fingers. • Do not swallow the cutter stopper. Contact Information Contact may differ by country. See the Web http://www.brother.eu/
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Author : Provided By MANUALSLIB.COM - http://www.manualslib.com/ Create Date : 2012:05:04 21:06:22Z Keywords : manuals, instruction manuals, user manuals, service manuals, user guides, pdf manuals, owners manuals, installation guides Modify Date : 2014:12:07 12:07:44+08:00 Subject : Search through 700.000 manuals online & and download pdf manuals. Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Creator : Provided By MANUALSLIB.COM - http://www.manualslib.com/ Description : Search through 700.000 manuals online & and download pdf manuals. Title : ManualsLib - Makes it easy to find manuals online! Creator Tool : pdftk 1.44 - www.pdftk.com Metadata Date : 2014:12:07 12:07:44+08:00 Producer : itext-paulo-155 (itextpdf.sf.net-lowagie.com) Document ID : uuid:546f43f6-e50f-384d-9112-164c2bf38dfa Instance ID : uuid:750c1e47-ba18-ee4c-b20c-5013099b8c9f Page Count : 2EXIF Metadata provided by EXIF.tools