Buhler Allied Fk314 Users Manual

snowblower 46e61c16-8133-46ab-9df3-1f6f4c61c41f Buhler Snow Blower FK314 User Guide |

: Buhler Buhler-Allied-Fk314-Users-Manual-485765 buhler-allied-fk314-users-manual-485765 buhler pdf

Open the PDF directly: View PDF .
Page Count: 23

Download
Open PDF In Browser	View PDF

85” Snowblower

TABLE OF CONTENTS

DESCRIPTION

PAGE

Warranty ......................................................................1
Safety Instructions .......................................................2
Safety Sign Locations ..................................................3
Assembly Instructions ..................................................4
Operating Instructions ..................................................5
85” Allied Snowblower Drawings..................................6
85” Allied Snowblower Parts List..................................8
Manual Chute Control Instructions & Drawing .............10
Manual Chute Control Parts List ..................................11
Hydraulic Chute Control Instructions & Drawing ..........12
Hydraulic Chute Control Parts List ...............................13
85” Allied Snowblower PTO Drawing ...........................14
85” Allied Snowblower PTO Parts Lists .......................15
Gearbox Assembly Drawing.........................................17
Gearbox Assembly Parts List.......................................18
Cylinder Assembly Drawings & Parts Lists ..................19
Shipping Bundles .........................................................20

85” Snowblower

WARRANTY POLICY
Buhler Manufacturing products are warranted for a period of twelve (12) months (90 days for
commercial application) from original date of purchase, by original purchaser, to be free from
defects in material and workmanship under correct, normal agricultural use and proper
applications.
Buhler Manufacturing’s obligations under this warranty shall be limited to the repair or
exchange, at Buhler Manufacturing’s option, of any Buhler Manufacturing product or part which
proves to be defective as provided. Buhler Manufacturing reserves the right to either inspect
the product at the buyer’s location or have it returned to the factory for inspection.
The above warranty does not extend to goods damaged or subject to accident, abuse or misuse
after shipment from Buhler Manufacturing’s factory, nor to goods altered or repaired by anyone
other than an authorized Buhler Manufacturing representative.
Buhler Manufacturing makes no Express Warranties other than those, which are specifically
described. Any description of goods, including any references and specifications in catalogues,
circulars and other written material published, is for the sole purpose of identifying goods and
shall conform to such descriptions. Any sample or model is for illustrative purposes only and
does not create an Express Warranty that the goods conform to sample or model shown.
The purchaser is solely responsible for determining suitability of goods sold. This warranty is
expressly in lieu of all other warranties expressed or implied. Buhler Manufacturing will in no
event be liable for any incidental or consequential damages whatsoever. Nor for any sum in
excess of the price received for the goods for which liability is claimed.

WARRANTY CLAIMS:
Warranty requests must be prepared on Buhler Manufacturing Warranty Claim Forms with all
requested information properly completed. Warranty Claims must be submitted within a thirty
(30) day period from date of failure repair.

WARRANTY LABOR:
Any labor subject to warranty must be authorized by Buhler Manufacturing. The labor rate for
replacing defective parts, where applicable, will be credited at 100% of the dealer’s posted shop
rate. Defective parts will receive an extra 10% discount to assist with freight or other incidental
costs.

GOVERNMENT LEGISLATION:
Warranty terms and conditions are subject to Provincial or State legislation.

IMPORTANT FACTS:
Buckets and Bucket Tines Carry No Warranty
Bent Spears Carry No Warranty
Snowblower Fan Shafts Carry No Warranty
Mower Blades Carry No Warranty
Portable Auger Parts Have Two (2) Year Warranty
Loader Parts Have Two (2) Year Warranty

IMPORTANT NOTE: This warranty does not apply to rentals
-1-

85” Snowblower

CAUTION

1.

Always review operator’s manual before starting new machine.

2.

Do not let inexperienced operators or children run this equipment.

3.

Never service or clean unit while it is running.

4.

Do not remove shields.

5.

Stay clear of augers.

6.

Stay clear of discharge chute. Rocks can be picked up and thrown.

7.

Poor judgment results in accidents. Always be careful.

8.

Remember a careful operator is the best insurance.

THIS SYMBOL MEANS

STAY ALERT! WATCH FOR IT!

-2-

85” Snowblower
SNOWBLOWER
This manual covers the 85” model snowblower. When ordering parts, be sure to list the
serial number of your unit and blower width. The snowblower is the push type and will
mount to a tractor with a category 1 or 2 three point hitch and 540 rpm PTO. The 85"
model has a single auger and comes with a hydraulic control for the chute with a
manual control available as an option.
The auger and the blower are equipped with shear bolts to protect the machine from
damage in case a large object is picked up. Any gravel picked up in the snow will be
thrown with it and could cause serious injury. Be careful when operating the
snowblower. Do not let children play behind the tractor or in the area of the discharged
snow.

#

#2

#3
-3-

85” Snowblower
BASIC ASSEMBLY INSTRUCTIONS
STEP 1.
STEP 2.
STEP 3.
STEP 4.

STEP 5.

STEP 6.

STEP 7.

Assemble the snow chute, referring to instructions under the appropriate
heading for “manual chute” or “hydraulic chute”.
Check the gearbox and fill to the lower level with a winter grade
transmission oil.
The snowblower is shipped with lower three point hitch pins for a category
2 hitch.
Using tape or bright colored marking pen, mark on the outer shields of the
PTO, the position where the shaft is completely pushed together and the
position where you have a 4” overlap. Watch these marks when moving
the blower through all possible operating angles to see that the PTO shaft
stays within this range.
With the engine on the tractor shut off, attach the PTO shaft. The tractor
end has a standard 6-spline end with a spring loaded locking collar. The
snowblower end has a clamp style yoke with a 3/8” keyway. Slide the
yoke onto the gearbox shaft with the 3/8” shaft supplied. Lock the yoke in
place with a ½” x 3” hex bolt and lock nut fitted through the groove in the
gearbox shaft. After tightening the bolt, insert and tighten the 3/8” socket
set screw supplied.
CAUTION: Always check to see that
both ends of the PTO shaft are securely attached every time the
snowblower is used. This should always be done with the tractor shut off.
Check that the PTO shaft does not bottom or separate with the
snowblower in the extreme high and low positions. A longer optional PTO
shaft is available if the standard shaft is too short. Check for free
movement of all parts in various raised positions: particularly the PTO
shaft.
NOTE:
Excessive u-joint wear and shear pin failure may result if the
PTO angle exceeds 20°. The drawing below gives an approximate way to
check this angle. With the PTO half extended, the tractor output should
not be over 28 inches high. Use 30 inches if the PTO is nearly fully
extended and 26 inches if it is nearly compressed.

-4-

85” Snowblower
OPERATING INSTRUCTIONS
1.

Adjust the top link of the tractor hitch so that the snowblower is level when
resting on the ground.

2.

Adjust the lower link sway chains or blocks on the tractor to restrict side
movement of the blower when operating.

3.

Run the blower at low RPM to check operation.

4.

The snowblower has two shear bolts to protect the tractor and blower in
case a large object enters the blower. PTO shear bolt – two 5/16" x 1"
(grade 5), auger shear bolt - 5/16" x 1 ¼” (grade 5). These bolts must be
checked every five operating hours and kept tight to prevent wear of the
bolts and bolt holes.

5.

Daily check the auger bearing bolts on each side of the snowblower, the
drive sprocket bearings and the bolt holding the blower fan on the gearbox
shaft.

6.

Grease the PTO and bearings every 40 hours of operation.

7.

A little engine oil applied to the chain daily can double the life of the drive
chain.

8.

Occasionally apply a light winter grade oil to the chute bottom ring to ease
turning.

9.

Always disengage the PTO before dismounting from the tractor.

10.

CAUTION: Always check to see that both ends of the PTO shaft
are securely attached as per instructions every time you are preparing to
use the snowblower.

11.

Shear sprocket: The shear sprocket (#6) should be checked at the
beginning of every season to make sure it will spin freely. With time this
sprocket could corrode and seize which will not allow the shear bolt to
break if something jams in the snowblower auger. Clean to loosen if
necessary.

12.

Gearbox: Use any 80-90 gear oil or multigrade with 80 minimum.

13.

When replacing bearings or tightening a loose bearing collar, always
tighten collar in the direction of shaft rotation using a center punch or
similar tool.

-5-

85” Snowblower
85" ALLIED SNOWBLOWER

-6-

85” Snowblower

-7-

85” Snowblower
WHEN ORDERING PARTS
Always give your dealer the Model, Color and Serial Number of your machine to assist
him in ordering and obtaining the correct parts. Use the exploded view and tabular
listing of the area of interest to exactly identify the required part.

85'' ALLIED SNOWBLOWER PARTS LIST
Item # Part #
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19

20
21
22
23
24
25
26
27
28
29
30
31
32

905612
21598
965418
965420
965912
965914
965962
23393
23395
109585
965969
22695
965423
FX9700
965966
965910
101528
902377
965433
961676
810754
965426
965430
84336
84467
81671
84268
84277
81619
81627
86170
84072
81552
81700
81676

Description
Snowblower Main Weldment
Fan Weldment
Auger Weldment
Drive Shaft
40T Sprocket, #60 1 3/8'' Bore
13T Sprocket, #60 1 1/4'' Bore
Idler Sprocket, 13T, #60, 5/8'' Bore
Shear Pin Shield
Drive Shaft Shield
PTO Gearbox Shield
Idler Spacer
Chain Cover
Roller Chain (#60 x 98 Link w/ Conn)
Hitch Weldment
Quick Hitch Lift Pin (Cat. 2)
Top Link Pin (Cat. 2)
Drive Shaft Key (3/8'' x 1 5/8'')
Key (Fan) (3/8'' x 4 3/4'')
1 1/4'' Bearing Assembly (UCF207-20)
1 1/4'' Bearing Only
Flange Housing
1 3/8'' Bearing Assembly
1 3/8'' Bearing Only
3/4'' x 4'' Hex Bolt (pl)
3/4'' x 2'' Hex Bolt (pl)
5/8'' x 4'' Hex Bolt (pl)
5/8'' x 1 1/2'' Hex Bolt (pl)
1/2'' x 1 1/2'' Hex Bolt (pl)
1/2'' x 1'' Hex Bolt (pl)
1/2'' x 3'' Hex Bolt (pl)
3/8'' x 1'' Hex Bolt (pl)
3/8'' x 3/4'' Hex Bolt (pl)
5/16'' x 1 1/4'' Gr. 5 Hex Bolt (pl)
3/4'' Hex Nut (pl)
5/8'' Hex Nut (pl)
-8-

85” Snowblower

33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67

81636
812364
81592
84217
812362
81701
81678
81637
81593
936402
965911
988999
BU50505
81677
F842
965648
965970A
961658
965646
961876
903523
961012
81569
81568
24930
115370
902407
900712
967164
108979
107780
967140
81210
86171
812026

1/2'' Hex Nut (pl)
1/2'' Lock Nut (pl)
3/8'' Hex Nut (pl)
3/8'' Wing Nut (pl)
5/16'' Lock Nut (pl)
3/4'' Lock Washer (pl)
5/8'' B.S. Flat Washer (pl)
1/2'' Lock Washer (pl)
3/8'' Lock Washer (pl)
PTO Safety Chain
7/16'' Linch Pin
3/8'' x 3/8'' Socket Set Screw
Gearbox w/o Oil
5/8'' Lock Washer (pl)
PTO Assembly (#242-16216)
Spout Weldment
Spout Clamp
1/4'' Cable Clamp
Spout Adjustment Bar
1/2'' x 1 1/2'' Clevis Pin (pl)
Adjustment Pin Weld't
#16 Hair Pin Clip
5/16'' Lock Washer (pl)
5/16'' Hex Nut GR2 (pl)
Cylinder 1.75''Dia x 5.0 - 9/16'' ORB
3/8'' x 108 Hyd Hoses C/W Fittings
Skid Plate Weldment
Skid Pin Weldt (pl)
Pound-In Grease Nipple
Swivel Arm
Chute Cable 1/4'' x 71''
1'' x 10ga Rim Washer (pl)
1/4'' x 2'' Cotter Pin (pl)
3/8'' x 1 1/4'' Hex Bolt (pl)
5/16'' x 1'' Hex Bolt (pl)

-9-

85” Snowblower
MANUAL CHUTE CONTROL
1.
2.
3.
4.
5.
6.
7.
8.

Remove spout clamp and install chute.
Mount handle brackets to snowblower & hitch.
Insert handle extension, placing a 1” flat washer on both sides of the front
handle bracket; secure with 3/16 cotter pin.
Attach handle to handle extension.
Turn chute away from handle.
Attach end of cable with cable bolt.
Wrap cable clockwise around chute and attach cable to tab on chute with
cable clamp.
Wrap cable around handle extension 5 complete turns. Then secure other
cable bolt.

- 10 -

85” Snowblower

85'' Manual Chute Control
Item #
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21

Part #

Description

965648
965970A
102157
108014
108015
108020
108019
108265
81207
811631
961658
812363
81552
81568
81569
84522
84498
965646
961876
961012
903523

Spout Weldment
Spout Clamp
Crank Handle
Handle Extension
Handle Bracket
Handle Bracket
Cable Bolt
Chute Cable 3/16'' x 66''
3/16'' x 2'' Cotter Pin
1/4'' x 1 1/2'' Hex Bolt (pl)
1/4'' Cable Clamp
3/8'' Lock Nut (pl)
5/16'' x 1 1/4'' Hex Bolt (pl)
5/16'' Hex Nut (pl)
5/16'' Lock Washer (pl)
1'' SAE Flat Washer (pl)
1/4'' Lock Nut (pl)
Spout Adjustment Bar
1/2'' x 1 1/2'' Clevis Pin
#16 Hair Pin Clip
Adjustment Pin Weld't

- 11 -

85” Snowblower
HYDRAULIC SNOW CHUTE
NOTE:
1.
2.
3.
4.
5.
6.
7.
8.

Before mounting chute, apply a heavy coating of light grease to chute ring.
Remove spout clamp and mount chute.
Mount pivot arm. NOTE: Flat Washers are supplied for height spacer if
required.
Connect one end of cable to pivot arm with cable clamp.
Wrap cable completely around chute ring. Then return to pivot arm and
connect with cable clamp.
Turn chute 90° from position illustrated so opening of chute is facing
opposite direction of pivot arm.
Attach cable to tab with ¼” cable clamp.
Connect 8” stroke hydraulic cylinder between hitch and pivot arm.
NOTE: A hydraulic cylinder and hose kit to control the spout deflector is
available as an option.

- 12 -

85” Snowblower

85'' Hydraulic Chute Control
Item #
1
2
3
4
5
6
7
8
9
10
11
12
13
14

Part #

Description

965648
965970A
108979
107780
961658
965646
961876
961012
967140
812435
81552
81569
81568
903523

Discharge Chute
Spout Clamp
Cable Pivot Arm
Chute Cable
1/4'' Cable Clamp
Spout Adjustment Bar
1/2'' x 1 3/8'' Clevis Pin
#16 Hair Pin Clip
1'' Flat Washer
1/4'' x 1 3/4'' Cotter Pin
5/16'' x 1 1/4'' Hex Bolt (pl)
5/16'' Lock Washer (pl)
5/16'' Hex Nut (pl)
Adjustment Pin Weldment

- 13 -

85” Snowblower

85” ALLIED SNOWBLOWER PTO

- 14 -

85” Snowblower
SNOWBLOWER PTO (STANDARD)
Item # Part #

1
2

F842
936263
936264
936277
936199

3

936249

4
5
6

903296
812362
936025
906504
936270
936319
936272
936273
936274
936269
81627
812364

7
8
9
10
11
12
13
14

Description
Shaft Complete
Tractor Half of PTO (Shear)
Implement Half of PTO (Clamp Yoke)
Shear Assembly
Safety Slide Lock Repair Kit
(Collar, Spring, Ret. Ring, 2-Pawls)
Shear Assembly Repair Kit (3/8'' x 1/2'' Bolt,
Lube, Blank, 31 - 1/4'' Balls)
Shear Bolt - 5/16" x 1" (Grade 5) (Pack of 10)
5/16'' Lock Nut
Repair Kit (Option)
Extended Life Repair Kit (Std)
Yoke & Tube
Bearing & Snap Ring Kit
Inner Shield
Outer Shield
Yoke & Shaft
Clamp Yoke
1/2'' x 3'' Hex Bolt (pl)
1/2'' Lock Nut (pl)

- 15 -

85” Snowblower
SNOWBLOWER PTO (OPTIONAL LONG)
Item # Part #

1
2

F844
936285
936280
936277
936199

3

936249

4
5
6

903296
812362
936025
906504
936281
936319
936282
936283
936284
936269
81627
812364

7
8
9
10
11
12
13
14

Description
Shaft Complete
Tractor Half of PTO (Shear)
Implement Half of PTO (Clamp Yoke)
Shear Assembly
Safety Slide Lock Repair Kit
(Collar, Spring, Ret. Ring, 2-Pawls)
Shear Assembly Repair Kit
(3/8'' x 1/2'' Bolt, Lube, Blank, 31-1/4'' Balls)
Shear Bolt - 5/16" x 1" (Grade 5) (Pack of 10)
5/16'' Lock Nut
Repair Kit (Option)
Extended Life Repair Kit (Std)
Yoke & Tube
Bearing & Snap Ring Kit
Inner Shield
Outer Shield
Yoke & Shaft
Clamp Yoke
1/2'' x 3'' Hex Bolt (pl)
1/2'' Lock Nut (pl)

- 16 -

85” Snowblower
GEAR BOX ASSEMBLY

- 17 -

85” Snowblower
GEARBOX ASSEMBLY PARTS LIST - BU50505
Item #
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24

Part #

Description

BU575901
BU575902
BU50444
BU50417-1
BU50310
BU50502
BU50507
BU50422-1
BU50415
BU50414-1
BU50414-2
BU50414-3
BU50458
BU500397-6
BU50429
BU50329
BU50457
BU500089-3
BU500167-1
BU50428
BU50331
BU575906
BU575907
BU278811

Bearing Cone (13687)
Bearing Cup (13620)
Staking Lock Nut
Key
Gear Box Casting
Pinion Shaft
Cross Shaft
Oil Seal
Retaining Ring
0.005 Shim
0.010 Shim
0.020 Shim
Gasket
5/16'' x 5/8'' Hex Bolt
Key
Bevel Gear
Cover Plate
3/8'' Pipe Plug
1/8'' Relief Valve
Staking Lock Nut
Bevel Gear
Bearing Cone (14137A)
Bearing Cup (14276)
Retaining Ring

- 18 -

85” Snowblower
1.75 X 5 CYLINDER ASSEMBLY
Item #

Part #

Description

1
2
3

24930
115367
112104
X2669

Cyl Complete
Tube Weldt
Shaft Weldt 1.0 Dia
Seal Kit

3.5 x 8 CYLINDER ASSEMBLY
Item #

Part #

Description

1
2
3

24803
24804
113934
X2098

Cyl Complete
Tube Weldt
Piston Rod 1.5 Dia
Seal Kit

- 19 -

85” Snowblower
85" ALLIED SNOWBLOWER BUNDLES
QUANTITY BUNDLE NO.

DESCRIPTION

85" SNOWBLOWER W/HYDRAULIC CONTROL - YC8520
1
1

FX0091
FX9700

Body Assembly
Quick Hitch

OPTIONS AVAILABLE
FX8044 - Hand Crank Kit for 85” only
FX7880 - Hydraulic Chute Control Kit (85")
F842 - Standard PTO for 85” only
F844 - 36" Optional Long PTO
F9116 - Hydraulic Cylinder & Hose Kit
F9117 - Spout Deflector Cylinder & Hose Kit

- 20 -

DIVISION LOCATIONS
Farm King Division
301 Mountain Street S.
Morden, MB R6M 1X7
Ph.: (204) 822-4467
Fax: (204) 822-6348
Allied Division
1201 Regent Ave. W.
Box 1003
Winnipeg, MB R2C 3B2
Ph.: (204) 661-8711
Fax: (204) 654-2503
Inland Division
675 Washington Ave.
Winnipeg, MB R2K 1M4
Ph: (204) 667-7854
Fax: (204) 669-2599

U.S. WAREHOUSES
AR, West Memphis
(870) 732-3132

ND, Bismarck
(701) 223-1886

GA, Stone Mountain
(770) 908-9439

ND, Fargo
(701) 282-7003

IA, Lakeview
(712) 657-8585

NY, Syracuse
(315) 463-5276

ID, Meridian
(208) 887-6006

OH, Youngstown
(330) 793-0862

IN, Clarksville
(812) 284-3376

OR, Portland
(503) 234-0378

KS, Wichita
(316) 265-9577

SD, Huron
(605) 352-8616

MN, Lakeville
(952) 469-5267

TX, Houston
(713) 928-2632

MT, Billings
(406) 248-7771

UT, Salt Lake City
(801) 972-4321
WI, Portage
(608) 742-1370

B.I.I. Division
rd
1330 43 Street N.W.
Fargo, ND 58102
Ph: (701) 282-7014
Fax: (701) 282-5865

OFFSHORE WAREHOUSES

CANADIAN WAREHOUSES

AB, Edmonton
(403) 962-6991

Burando Hill
Katanning
W. Australia
011-618-98-214422

John Kerr Equipment Ltd.
Wilcoxholm Farm
Linlithgow, W. Lothian
Scotland
011-441-506-842280

SK, Regina
(306) 781-2300

Chihuahua, Mexico
011-52-158-90306

Skovde, Sweden
011-46-500-452651

B.C., Abbotsford
(604) 864-2665

Naestved, Denmark
011-45-557-29511

ON, Woodstock
(519) 539-0435
ON, Jasper
(613) 283-1758
QC, Dorion
(450) 455-4840

Buhler Manufacturing “a partnership”
301 Mountain Street S.
Morden MB.
R6M 1X7
Ph.: (204) 822-4467
Fax: (204) 822-6348
www.buhler.com
Printed in Canada



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Page Count                      : 23
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:ec87bb09-3ba2-4814-a367-bb3c3b0658e9
Keywords                        : 
Producer                        : wpsupport.api - 1.1.0.0
Modify Date                     : 2007:01:29 15:58:31-06:00
Create Date                     : 2005:04:12 12:55:35-05:00
Creator Tool                    : wpsupport.api - 1.1.0.0
Metadata Date                   : 2007:01:29 15:58:31-06:00
Document ID                     : uuid:e023a421-1d95-470a-8942-03b69f5c66cf
Format                          : application/pdf
Creator                         : wpsupport.api - 1.1.0.0

EXIF Metadata provided by EXIF.tools