Bulk Un 0509 SING-A-LONG Bluetooth & MP3 Player with Dual Microphones User Manual 0509
Bulk Unlimited Corp.. SING-A-LONG Bluetooth & MP3 Player with Dual Microphones 0509
Bulk Un >
0509_User Manual
F、Technical Information Bluetooth specification Bluetooth v2.1+EDR Supportive Bluetooth protocol AVCTP1.0,AVRCP1.0 GAVDP1.2,AVDTP1.0 A2DP1.2,Hands-Free profile1.5 Headset profile v1.1 Supportive music file format MP3/WMA USB Port Support USB 2.0 Supportive USB flash capacity 128MB ~ 32G FM reception frequency range 87.5 ~ 108MHz FM stored channels 20 Power supply Battery:4 x 1.5V ”AA” batteries Item no. 0509 Battery Operated Or Micro-USB Power Supported Adapter Type:Switching Adapter Input Voltage:AC 100-240V 50/60Hz Output voltage、Current:DC 5V、 800mA DC 5V output plug:micro-USB Speaker output power >500mW Display screen LCD Operating environmental -5 to 40 °C temperature G、Trouble Shooting The product is controlled by MCU, if there is any function trouble (such as the buttons are invalid, abnormal function and LCD screen holds still), please turn off the power, wait for about one minute and turn on the power again. If the player resumes working at the moment, it can be used again normally. SYMPTOM CHECK AND ACTION NO POWER 1. Check if the adapter has been properly connected to the player and the indoor power socket. 2. Check whether the battery is installed correctly. 3. Replace the battery which is exhausted. 4. Make sure the power switch has been switched to "ON" No sound of the speaker 1、Check if the volume is rotated to the minimum, and adjust volume higher Bad reception of FM radio 1. Adjust position of the player 2. No sound of Line In input Turn off nearby electrical equipment. 5. Check if the Line Cable is damaged or connected correctly 6. Check if the external equipment works normally. 7. Check if the product has entered Line In run mode. 8. Check if the volume is rotated to the minimum, and adjust volume higher Can not play music in USB 1. Check if USB flash drive has been inserted into the player correctly flash drive 2. Check if there are any music files of MP3/WMA format in USB flash drive; for no FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Radiation Exposure Statement MP3/WMA file inside USB flash drive, it will indicate “no FILE” on LCD screen This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of FCC RF Rules. 3. Check if the music files in USB flash drive are damaged. CAUTION: 4. Check is USB flash drive is damaged. Note: When battery power is weak, some USB flash drives inserted into the player may not work properly. Please replace with new battery or connect to external (DC.5V) power supply in time. IMPORTANT MESSAGES: Thank you for buying this Bluetooth Dual Microphones Karaoke, Please take a moment to read these instructions of how to operate this product safely and properly. Please keep this packaging since it contains important information. To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device is comply with Class B limits. All peripherals must be shielded and grounded. Operation with non-certified peripherals or non-shielded cables may results in interference to radio or reception. MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device. A. Important Notes 1. Do not repair, alter or disassemble the unit arbitrarily. 2. Do not drop it in water or drop water on it. 3. Do not put the unit outdoors, in the washroom, bathroom or other places that may get it wet. 4. Do not put the unit on the unstable shelf, sloping surface or other places that may cause the falls of the unit. 5. Do not insert small objects into the unit. 6. Please follow the instruction of airlines when use it in an aircraft. Press each time to select mode in circular sequence: Bluetooth → USB → FM → Line-in function; The Default mode is Bluetooth 10、LCD Display 11、Power Switch : Turn on or turn off power supply 12、MIC VOL : Rotate to adjust microphone volume 13、USB Port:For inserting external USB flash drive 14、Line-in:External audio signal (audio source of other devices) input 15、DC 5V Input :External power input via micro-USB cable (d.c. 5V 800mA) 16、Built-in Speaker 7. Do not hit or strike the unit by hard objects. C、Unpacking 1、Main Unit 8. Do not use and keep the unit in the dusty, oily, smoky and humid places. 9. Do not touch and plug DC Adapter by wet hands in case of electric shock. 2、Line-in connecting cable 3、Micro-USB cable(Optional) 10. Do not use chemicals (like alcohol, benzene thinner) to clean the unit. B. Appearance and Function Introduction 10 Main Unit (the player) MIC ON/OFF MIC ON/OFF 11 12 MIC. VOL. 13 14 15 Line-in cable Micro-USB cable(Optional) D、Power Supply 1、Battery installation * Unscrew and remove the battery cover of the unit. * Insert 4 x “ AA” alkaline batteries with the correct polarity. * Replace the battery cover and tighten screws 16 1、Microphone (Left) 2、Microphone (Right) 3、MIC ON/OFF Button :Press to turn on or turn off the left microphone MIC. VOL. 4、MIC ON/OFF Button : Press to turn on or turn off the right microphone 5、Volume Up/Down (+/-):Digital Volume Control 6、PREV/SKIP- ( ): a) In USB or Bluetooth mode, press to choose previous music b) In FM mode, press to choose previous channel 7、NEXT/SKIP+( ): a) In USB or Bluetooth mode, press this button to choose next music b) In FM mode, press this button to choose next channel 8、PLAY/PAUSE/RADIO SCAN/M+/Bluetooth( ): a).In USB or Bluetooth mode, press to play or pause the music b).In FM mode, press more than 3 seconds to enter FM auto-scan and save channels automatically; during auto-scan process, press to stop scan, and press again to choose the saved channel c).In bluetooth mode, long press to erase paired information. 9、Mode Switch Important safety instructions *Replacement of batteries must be done by an adult. *Batteries are to be inserted with the correct polarity. *Only batteries of the same or equivalent type as recommended are to be used. *Do not use rechargeable batteries. *Do not mix alkaline standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries. *Do not mix old and new batteries. *Exhausted batteries are to be removed from the toy. *Non-rechargeable batteries are not to be recharged. *The supply terminals are not to be short-circuited. *Rechargeable batteries are to be removed from the toy before being charged *Rechargeable batteries are only to be charged under adult supervision 2、Use of Adapter (adapter is not included) 4).Toys liable to be cleaned with liquid are to be disconnected from the transformer before cleaning. 1. Ensure that the local voltage corresponds to the adapter voltage. 5).The toy is not to be connected to more than the recommended number of power supplies. 2. Plug DC 5V output of micro-USB cable to the player, and another terminal connects to indoor power socket. E、Basic Function Power on a、Install batteries correctly or connect the player with DC 5V adapter b、Slide the power switch to “ON” c、The player is designed with power-saving feature. In Bluetooth, USB or Line-in mode, if no operation MIC. VOL. within 30 minutes after stopped music, the indicated word “OFF” will show on LCD display and flash slowly for 3 seconds then shut down the power of player automatically. After that, press any button will not activate the player. and have to slide power switch from OFF to ON again to turn on the player. [ Note: no power-saving feature in FM mode ] Notes: *if the product is not used for a long time (30 days or more), please press the power switch to “OFF”, and 1、Bluetooth Function take out batteries in case the leakage of batteries damage the products. a、After power on, the player goes to Bluetooth mode automatically *When batteries are exhausted, the product will stop working automatically. Please take out the batteries in b、When hearing “beep-beep” from the player, the Bluetooth is waiting pairing, and the word“bt” time in case the leakage of batteries damage the products. *The product can be powered by the USB cable connected to computer. 3、 Specification of Adapter indicates on LCD and flash (as showing in picture E-1-a) c、 Enter the Bluetooth interface of mobile phone or other device, choose “search for device” or “Search for audio ” 1). Adapter type: Power Switch d、 When Pairing code “SC-56M” shows on searching list on display of mobile phone or other 2). Input Voltage: AC 100-240V 50/60Hz device, please select the “SC-56M” for pairing 3). 0utput Voltage: DC 5V; Output Current: ≥800mA e、 If password is needed, please input “0000” and then press “ok”. 4). Output DC plug: select the micro-USB plug that matches DC Input of the player f、 When pairing is successful, you will hear a “beep” from the player, and the word “bt” stops flash 4、 Battery symbol indicates on LCD Display when using batteries as power supply and stays on LCD of player. g、 Press press to play music, and press again to pause music. Press to choose next music or to choose the previous music h、The effective distance between the player and Bluetooth device is around 10 meters; When Bluetooth device moves out of 10 meters, the Bluetooth connection will be discontinued and can be Battery symbol will disappear when using DC 5V input as power supply, if the DC 5V input is restored if Bluetooth device moves back within 10 meters (under Auto-connect status, the words discontinued, it will switch back to power supply of batteries “-bt-” shows on LCD and flash, as showing in picture E-1-b) i、When turn off the player and turn on again, the player will automatically search and connect to the CAUTION: When using optional AC adapter, it must comply with the specifications of CEE publication 15. Charging unit to be used with toy should be regularly examined for potential hazard as damage to the cable or last Bluetooth device which was successfully connected, and LCD display as showing in picture E-1-b j、To erase current Bluetooth pairing information, press and hold button, then the word “bt” indicates on LCD and flash (as showing in picture E-1-a) cord, plug, enclosure of other parts and that, in the event of such damage, the toy must not be used. Transformers used with the toy are to be regularly examined for damage to the cord, plug, enclosure and other parts, and that, in the event of such damage, the toy must not be used with this transformer until the damage has been repaired. 1). Warning! Not suitable for children under 36 months. Electric shock hazard. (E-1-a) (E-1-b) 2). The toy shall only be used with a transformer for toys. 3). The transformer is not a toy; 2、MP3 (USB) Function d、When no Line-in cable is connected in Line-in mode, the words “no” and “LInE” will indicate on a、 After power on, insert USB flash drive to USB port of the player, and press Mode Switch to select LCD alternately USB function, the word “USB” firstly indicates on the LCD player and then the total number of songs included in USB flash drive will indicate on the LCD player as showing in picture E-2-a. b、Press to play the music and the playing time of running music indicates on LCD display, as showing in picture E-2-b. c、Press to pause music, and the playing time as showing in picture E-2-b and the playing tracks as showing in picture E-2-c will alternatively indicates on the LCD player. MIC. VOL. d、Press again to be back to play music . e、 Press to choose previous / next music, the playing tracks indicates on LCD display, as showing in picture E-2-c. (E-4-a) (E-2-a) (E-2-b) (E-2-c) f、When no USB flash drive is inserted in USB mode, the words “no” and “USB” will indicate on (E-4-b) 5、Volume Up/ Down Press volume "+" / "-“to increase or decrease output volume of speaker. Volume up to 10 levels, as showing in picture E-5. LCD alternately g、When USB flash driver is inserted but no music file is detected, the words “no” and “FILE” will indicate on LCD alternately 3、FM Radio ( E-5 ) a、After power on, press Mode Switch to select FM Mode, LCD display as showing in picture E-3-a b、Press and hold about 3 seconds, the player will automatically search in 87.5-108MHz and save max. 20 FM channels. To stop search, press again, then the player will go back to the first saved FM channel. c、Press repeatedly to choose next FM channel that has been saved, as showing in picture E-3-b d、Manual Searching: Press repeatedly to search FM channel backwards / forwards (frequency will skip 0.1 MHz per each press.); Press and hold 6、Use of Microphone a、Take down the microphone and press "MIC ON/OFF" button, the microphone symbol (pic. E-6-a) will appear on LCD when using the left microphone, and the microphone symbol (pic. E-6-b) will appear on LCD when using the right microphone. to search backwards / forwards until valid FM channel and play radio. (E-6-a) (E-6-b) b、Aim your mouth toward microphone about 1 ~ 2 cm distance, and adjust MIC VOL to proper (E-3-a) (E-3-b) 4、Line in (External Audio Input) a、Connect Line in cable to the Line-out or headphone jack of external device, and another terminal to volume to sing along with the music. c、After use,press "MIC ON/OFF" button, the microphone symbol will disappear in the LCD screen accordingly, then put microphone back to its position of the player and adjust MIC VOL to minimum. the player’s Line-in jack, as showing in picture E-4-a b、Make sure external device (such as MP3 player) is power on and works normally. c、When power on, press Mode Switch to select Line-in Mode, the words “LInE” will indicate on LCD display, as showing in picture E-4-b;
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Format : application/pdf Title : CE-56M_Manual_用于FCC测试版说明书 Metadata Date : 2016:04:19 12:26:19+08:00 Modify Date : 2016:04:19 12:26:19+08:00 Create Date : 2016:04:19 12:26:19+09:00 Creator Tool : Adobe Illustrator CS6 (Windows) Thumbnail Width : 116 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 9984 bytes, use -b option to extract) Instance ID : uuid:1a1562c2-e328-4d6b-93f3-da0f6e6a009b Document ID : xmp.did:7E291511DA05E611881AFFA3C84D074C Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:7D291511DA05E611881AFFA3C84D074C Derived From Document ID : xmp.did:7D291511DA05E611881AFFA3C84D074C Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : default History Action : saved, saved History Instance ID : xmp.iid:C19109A25BF8E411BDA3D0F50AFFFBAE, xmp.iid:7E291511DA05E611881AFFA3C84D074C History When : 2015:05:12 16:00:31+08:00, 2016:04:19 12:26:12+08:00 History Software Agent : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows) History Changed : /, / Manifest Link Form : EmbedByReference Manifest Reference File Path : H:\CE-56M\Manual\IMG_20150606_102142_HDR.jpg Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 284.998625 Max Page Size H : 210.001652 Max Page Size Unit : Millimeters Font Name : ArialMT, Arial-BoldMT, ArialNarrow-Bold, ArialRoundedMT-Bold, HandelGotD-Bold, Myriad-Roman, TimesNewRomanPSMT, SimSun, MicrosoftYaHei, MicrosoftYaHei-Bold Font Family : Arial, Arial MT, Arial Narrow, Arial Rounded MT, HandelGotDBol, Myriad, Times New Roman, 宋体, 微软雅黑, 微软雅黑 Font Face : Regular, Bold, Bold, Bold, Regular, Roman, Regular, Regular, Regular, Bold Font Type : Open Type, Open Type, Open Type, TrueType, TrueType, Type 1, Open Type, TrueType, Open Type, Open Type Font Version : Version 6.70, 001.001, Version 2.30, 001.003, Version 001.005, 001.001, Version 6.70, Version 5.03, Version 6.02, Version 6.02 Font Composite : False, False, False, False, False, False, False, False, False, False Font File Name : arial.ttf, arial-bold.otf, ARIALNB_4.TTF, arial rounded mt bold_1.ttf, HANDGOTB.TTF, wmr_____.pfb; wmr_____.pfm, TIMES.TTF, simsun.ttc, msyh.ttf, msyhbd.ttf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants L : 73.333298 Swatch Groups Colorants A : 44 Swatch Groups Colorants B : 76 Swatch Groups Group Name : 明亮 Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000002 Swatch Groups Colorants Magenta : 90.000004 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Adobe PDF library 10.01 Page Count : 4 Creator : Adobe Illustrator CS6 (Windows)EXIF Metadata provided by EXIF.tools