Bury and Co KG CCBTL Handsfree Car Kit User Manual
Bury GmbH & Co KG Handsfree Car Kit
user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2326397 |
| Application ID | bv9NkAY0mmVbGWzfnkxRmQ== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 44.47kB (555864 bits) |
| Date Submitted | 2014-07-16 00:00:00 |
| Date Available | 2014-08-31 00:00:00 |
| Creation Date | 2014-07-16 08:03:09 |
| Producing Software | Corel PDF Engine Version 15.2.0.686 |
| Document Lastmod | 2014-07-16 08:03:09 |
| Document Title | MZDA-A2DP-OM - Mazda - A2DP BT OM - Issue XX - certification copy |
| Document Creator | CorelDRAW X5 |
| Document Author: | Jason Kwan |
® Bluetooth Mobile Phone Kit Owner's Manual Owner's Manual Part No: MZDA-A2DP-OM Issue X - XX/XX/14 Bluetooth Mobile Phone Kit Owner's Manual Thank you for purchasing a Mazda Bluetooth mobile phone kit. Before using the Mazda Bluetooth mobile phone kit, thoroughly read this manual and follow the instructions on how to operate this product. Contents 04 Overview 05 - 06 Introduction Bluetooth Wireless Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05 Mobile Phone Functionality. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05 Further Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06 Bluetooth Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06 Vehicle Audio System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06 Setting Up Your Mobile Phone 06 - 07 Pairing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06 Pairing Multiple Mobile Phones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 07 Connecting Your Mobile Phone (After Initial Pairing) . . . . . . . . . . . . . . . 07 Phone Functions 08 -09 Dialling Using Your Mobile Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08 Voice Dialling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08 Answering/Receiving a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08 Rejecting a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08 Ending a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09 Redialling Last Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09 Private Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09 Cancelling Bluetooth Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09 Streaming A2DP Audio 10-12 A2DP via Mobile Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Connecting/Pairing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 A2DP via Mazda Bluetooth Audio Transmitter . . . . . . . . . . . . . . . . . . . . . 10 Connecting/Pairing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 11 02 Owner's Manual Part No: MZDA-A2DP-OM Bluetooth Mobile Phone Kit Owner's Manual Contents - Continued System Reset Troubleshooting 12 13 - 14 Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 A2DP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Technical Specifications 15 FCC Notice 15 Further Information Contact 16 Owner's Manual Part No: MZDA-A2DP-OM 03 Bluetooth Mobile Phone Kit Owner's Manual Overview Initial Phone Pairing 1. Turn key to accessories. 2. Hold Bluetooth button pressed for 4 seconds. 3. Activate Bluetooth on phone and search for Bluetooth device. 4. Select device ‘MAZDA’ 5. Key password: ‘0000’ Connecting Phone Automatic - Activate Bluetooth on phone and turn car on. Manual - Turn car on, then activate Bluetooth on phone and press Bluetooth button once. Incoming Call Answer - Press Bluetooth button once. Reject - Press and Hold Bluetooth button for 3 seconds. Making a Call Voice dial - Press Bluetooth button once. Redial - Press Bluetooth button twice. During a Call Activate Private Mode - Press and hold Bluetooth button for 3 seconds. Deactivate Private Mode - Press Bluetooth button once. Activate Call Hold - Press Bluetooth button twice. Deactivate Call Hold - Press Bluetooth button twice. End Call - Press Bluetooth button once. 04 Owner's Manual Part No: MZDA-A2DP-OM Bluetooth Mobile Phone Kit Owner's Manual Introduction Your Bluetooth mobile phone kit allows you to answer incoming calls on your mobile phone without looking at or touching your mobile phone. Your Bluetooth voice capable mobile phone needs to only be inside the vehicle for it to connect to the Bluetoothmobile phone kit. Bluetooth Wireless Technology Bluetooth devices communicate using radio waves. The Bluetooth mobile phone kit is specifically designed for mobile phones that support Bluetooth wireless technology. The Bluetooth mobile phone kit can be used with devices that support the hands-free profile. "Profile" in this instance means a set of Bluetooth commands that your mobile phone uses for controlling your Bluetoothmobile phone kit. Your Bluetooth mobile phone and Bluetooth mobile phone kit do not need to be in a line of sight. For example, your mobile may be in your bag whilst connected to the Bluetooth mobile phone kit. The two devices need to be within a maximum of 10 metres of each other. Mobile Phone Functionality Mobile phones differ in their method of menu navigation. Furthermore, software releases of mobile phones with the same design can vary significantly. Therefore, please carefully read the operating guidelines of your mobile phone. Specifically take note of the functions relating to the topics ’Bluetooth’, ‘Hands-Free’ and ‘Headset Mode’. The capacity of your mobile phone's battery can quickly decrease when the Bluetooth function is active. If you do not want to use the Bluetooth function (i.e. when leaving your vehicle for an extended period) then deactivate this function on your mobile phone. Some functions described in this owners manual may not be available on your mobile phone. Further Information Refer to your mobile phone's owners manual, mobile phone retailer or mobile phone service provider for information that relates specifically to your mobile phone. If you have any questions concerning the installation or operation of your Bluetooth mobile phone kit, please contact your Authorised Mazda Dealer. Owner's Manual Part No: MZDA-A2DP-OM 05 Bluetooth Mobile Phone Kit Owner's Manual Definitions Paired: The mobile phone handset is set up to communicate with the Bluetoothmobile phone kit. Connected: The mobile phone handset is currently linked with the Bluetooth mobile phone kit. The functions on the Bluetooth mobile phone kit are active. HF: Hands Free profile, used to transmit Bluetooth call data from a phone to the Bluetooht kit. AVRCP: Audio/Video Remote Control Profile, used to navigate through music features such as Play/Pause/Next/previous. A2DP: Advanced Audio Distribution Profile, used to transmit stereo music data from a Bluetooth device to the Bluetooth kit. Bluetooth Microphone • Increase Volume • Decrease Volume • Play A2DP* • Pause A2DP* • Next Track* • Previous Track* Bluetooth Button * Function in A2DP mode Vehicle Audio System The vehicle’s audio system volume is automatically muted when you make or receive a call. The voice of the caller is heard through the audio system and the volume of the Bluetooth mobile phone kit can be adjusted using the microphone during a phone call. Setting Up Your Mobile Phone Pairing The connection between your Bluetooth capable mobile phone and the Bluetoothmobile phone kit can be established as follows: 1. Switch on your mobile phone. Note: If Mazda Bluetooth Audio Transmitter is connected to iPod, disconnect Transmitter from iPod. 2. Switch on the ignition. 3. Press and Hold the Bluetooth button for 4 seconds. 06 Owner's Manual Part No: MZDA-A2DP-OM Bluetooth Mobile Phone Kit Owner's Manual 4. Perform the following steps on your mobile phone: a. Enter the Bluetooth menu. b. Activate the Bluetooth function. c. Search for Bluetooth devices. d. Select the device labelled ‘MAZDA’. e. Enter the following PIN: 0000. This establishes the connection between your mobile phone and the Bluetoothmobile phone kit. f. Set the mobile phone to accept Bluetooth connection requests automatically without your permission. If it is not possible to establish a connection, refer to Troubleshooting. Pairing Multiple Mobile Phones The Bluetooth mobile phone kit can be paired with up to seven mobile phones, but can only be connected to one mobile phone at a time. When the ignition is turned on, the Bluetooth mobile phone kit searches for the most recently paired mobile phone. If this phone is not found, the Bluetooth mobile phone kit will continue searching for the next most recently paired mobile phone until a connection is made. Connecting Your Mobile Phone (After Initial Pairing) To connect your mobile phone to the Bluetoothmobile phone kit: 1. Move your mobile phone to within 10 metres of the Bluetooth mobile phone kit, preferably inside the vehicle. 2. Ensure that your mobile phone is switched on and the Bluetooth function on your mobile phone is enabled. Note: Ensure iPod dongle is not connected to iPod. 3. Switch on the ignition. Ensure the radio is switched ON. 4. The Bluetooth mobile phone kit will search for the last paired phone, followed by the next recently paired phone, until a connection is made. Note: If there are multiple phones in the vehicle which have been previously paired to the system, you must disconnect the currently paired phone before you can use the second phone in the vehicle. Follow the standard pairing procedure to connect the second phone. Owner's Manual Part No: MZDA-A2DP-OM 07 Bluetooth Mobile Phone Kit Owner's Manual Phone Functions Dialling Using Your Mobile Phone Handset When the Bluetoothmobile phone kit is connected to your mobile phone, you can make calls using your mobile phone handset. Important It is dangerous and may be illegal to use a hand-held mobile phone when you are driving. Always pull over to the side of the road (when safe to do so) before answering or making a call with a hand-held mobile phone. Voice Dialling If you wish to use the voice dial functions of your mobile phone (provided that your mobile phone is capable), entries for dialling phone numbers with voice dialling may have to be pre-recorded. These voice commands can then be called via the Bluetooth mobile phone kit with the active Bluetooth connection. To configure voice dialling on your mobile phone, refer to your mobile phone's owner's manual. To voice dial: 1. Ensure that there is no call in progress. 2. Press the Bluetooth button once. A tone will be heard indicating readiness to accept voice input. 3. Speak into microphone. 4. The Bluetooth mobile phone kit plays back the voice tag and dials the corresponding phone number. Answering / Receiving a Call To answer an incoming call: 1. Press the Bluetooth button once. Important It is dangerous and may be illegal to use a hand-held mobile phone when you are driving. Always pull over to the side of the road (when safe to do so) before answering or making a call with a hand-held mobile phone. Rejecting a Call If you do not wish to answer a call: 1. 08 Press and hold the Bluetooth button until the ring tone stops. Owner's Manual Part No: MZDA-A2DP-OM Bluetooth Mobile Phone Kit Owner's Manual Ending a Call To end a call: 1. Press the Bluetooth button once. Redialling Last Number To redial the last number dialled: 1. Ensure that there is no call in progress. 2. Press the Bluetooth button twice. Private Mode Private Mode transfers the call from hands-free to the mobile phone handset. To activate Private Mode: 1. Press and hold the Bluetooth button for three seconds. 2. Continue the call on the mobile phone handset. Important It is dangerous and may be illegal to use a hand-held mobile phone when you are driving. Always pull over to the side of the road (when safe to do so) before answering or making a call with a hand-held mobile phone. Cancelling Bluetooth Connection The Bluetooth connection is automatically disconnected when: 1. You move your mobile phone outside of the reception range of the Bluetooth mobile phone kit. (approximately 10 metres) OR 2. The ignition switch is turned off and the system is not on a call. OR 3. The mobile phone is switched off. Owner's Manual Part No: MZDA-A2DP-OM 09 Bluetooth Mobile Phone Kit Owner's Manual Streaming A2DP Audio The Bluetooth kit can stream audio music from an A2DP device via your stereo. A2DP via Mobile Phone Given that your mobile phone is enabled with A2DP Bluetooth Profile, you will be able to stream the music via the Bluetooth kit to your stereo. Note: The radio has to be set to AUX mode in order for the music to be heard. Connecting/Pairing Given a mobile phone is enabled with A2DP it will pair and connect automatically after the phone has previously been paired and connected. See ‘Setting up your mobile phone’ section. Functions Using your mobile phone, open the music player and select the desired song you want to play. The music will be heard through the stereo. Important It is dangerous and may be illegal to use a hand-held mobile phone when you are driving. Always pull over to the side of the road (when safe to do so) before answering or making a call with a hand-held mobile phone. All functionality can be done through the mobile phone. If AVRCP Bluetooth Profile is available on the phone the following functions can be done through the microphone: Previous Track Short Press ‘-’ button on Bluetooth microphone. Next track Short Press ‘+’ button on Bluetooth microphone. Pause Long Press ‘-’ button on Bluetooth microphone. Play Long Press ‘+’ button on Bluetooth microphone. Note: Connecting any other media device to the vehicle AUX IN jack will deactivate A2DP streaming. A2DP via Mazda Bluetooth Audio Transmitter Given you have a Mazda Bluetooth Audio Transmitter you will be able to stream the music from your iPod via the Bluetooth kit to your stereo. Note: The radio has to be set to AUX mode in order for the music to be heard. 10 Owner's Manual Part No: MZDA-A2DP-OM Bluetooth Mobile Phone Kit Owner's Manual Connecting/Pairing Note: If connecting both a mobile phone and the Mazda Bluetooth Audio Transmitter to the Bluetooth kit, it is recommended that the phone is connected first. When using a phone which can enable/disable Bluetooth profiles (such as Blackberry) manually disable Audio Source (A2DP) and AV Remote Control target (AVRCP) profiles when using the iPod Adaptor. When the Mazda Bluetooth Audio Transmitter is not connected to the iPod: 1. Switch on ignition. 2. Plug the Mazda Bluetooth Audio Transmitter into the iPod to begin the pairing and connecting process. 3. While searching, the light on the adaptor will flash quickly. Once connected the light will flash twice per second. When Mazda Bluetooth Audio Transmitter is connected to iPod: 1. Switch ignition on. 2. Turn iPod on by pressing any button on the iPod. 3. Press the play button once to begin the pairing and connecting process. 4. While searching, the light on the adaptor will flash quickly. Once connected the light will flash twice per second. Important It is dangerous and may be illegal to use a hand-held mobile phone when you are driving. Always pull over to the side of the road (when safe to do so) before answering or making a call with a hand-held mobile phone. Owner's Manual Part No: MZDA-A2DP-OM 11 Bluetooth Mobile Phone Kit Owner's Manual Functions All functionality can be done through the iPod itself however the following functions can also be done through the microphone: Previous Track Short Press ‘-’ button on Bluetooth microphone. Next track Short Press ‘+’ button on Bluetooth microphone. Pause Long Press ‘-’ button on Bluetooth microphone. Play Long Press ‘+’ button on Bluetooth microphone. The radio has to be set to AUX mode in order for the music to be heard. Note: Connecting any other media device to the vehicle AUX IN jack will deactivate A2DP streaming. When using Partially Compatible Nokia phones together with the Mazda Bluetooth Audio Transmitter, the phone’s Bluetooth connection may be lost when keypad tones or error tones are sounded. It is recommended to disable any tones and limit the phone usage while connected to the Bluetooth kit. To reconnect manually, enable the connection via the handset. System Reset If the Bluetooth Mobile Phone Kit is experiencing issues with operation or connection, you can perform a System Reset to restore it to the factory settings. 1. Switch on the ignition. Ensure the radio is switched ON. 2. Hold the Bluetooth button for 12 seconds. 3. At 10 seconds, the radio will ‘mute’. At 12 seconds, the radio will ‘mute’ again confirming the reset is complete. Note: It is also recommended to delete any Bluetooth connections from your mobile phone and connect to the device again. Refer to ‘Setting Up Your Mobile Phone (Pairing)’ on page 6 of this manual and your mobile phone’s owner’s manual. 12 Owner's Manual Part No: MZDA-A2DP-OM Bluetooth Mobile Phone Kit Owner's Manual Troubleshooting - Phone Problem Cause and Solution Mobile phone will not pair up with the Bluetooth mobile phone kit. 1. Ignition is turned off. Turn on the ignition. 2. Already connected to another paired mobile phone. Switch off other paired mobile phone(s) in the vehicle. 3. The mobile phone is not supported. Refer to your Authorised Mazda Dealer for phone compatibility list. 1. Ignition is turned off. Turn on the ignition. 2. Mobile phone is not paired to the Bluetooth mobile phone kit. Follow the instructions to pair the mobile phone to the Bluetoothmobile phone kit. 3. Automatic connection not set on the mobile phone. Follow your mobile phone owners handbook to ensure that authorised connection is enabled for the Bluetooth car kit. 4. Bluetooth kit may have frozen up. Kit needs to be reset, follow instructions to perform a System Reset 1. Mobile phone voice dialling is not available on your mobile phone. Check your mobile phone owners handbook. 2. No voice tags saved to your mobile phone. Refer to your mobile phone owners handbook. 3. Mobile phone is not fully compatible with the Bluetooth car kit. Refer to your Authorised Mazda Dealer for phone Compatibility list. Incoming call does not initiate an audible alert. 1. Check the incoming call alert is not deactivated in the mobile phone settings. 2. Check the mobile phone is not set to ‘silent’ mode. Redial does not work. 1. Your mobile phone has no last redialled numbers. Make the initial call from the mobile phone handset. Mobile phone will not connect to the Bluetooth mobile phone kit. Voice dialling does not work. 2. This feature is not enabled on your mobile phone. 3. Mobile phone is not fully compatible with the Bluetooth car kit. Refer to your Authorised Mazda Dealer for phone compatibility list. An echo is present. 1. Bluetooth system volume is too loud. Turn down the volume on the Bluetooth system during the call. Problem is still Present. Refer to your Authorised Mazda Dealer, or call Lumen Australia on (03) 87871000 for further information. Owner's Manual Part No: MZDA-A2DP-OM 13 Bluetooth Mobile Phone Kit Owner's Manual Troubleshooting - A2DP Problem Cause and Solution Cannot pair or connect Mazda Bluetooth Audio Transmitter to Bluetooth Kit. 1. Ignition is turned off. Turn on the ignition. 2. Mazda Bluetooth Audio Transmitter pairing time expired. Reset Mazda Bluetooth Audio Transmitter by disconnecting it from the iPod and repeat pairing procedure. 3. Another A2DP device is already connected to the Bluetooth kit. Hold down the ‘-’ button on the microphone until a tone is heard. Redo pairing procedure. 4. iPod battery low. Connect the charging cable. Redo pairing procedure. No iPod/Mobile A2DP audio can be heard. 1. Ignition is turned off. Turn on the ignition. 2. Volume is on mute or set to low. Adjust volume on vehicle’s audio system. 3. iPod battery low. Connect the charging cable. Redo pairing procedure. 4. Mazda Bluetooth Audio Transmitter is not connected to Bluetooth kit, re-connect Transmitter. 5. Radio is not set to Auxiliary input. Set radio to Auxiliary input. 6. iPod is paused. Press play button. 7. Another media device is connected to the vehicle AUX IN jack. Remove any plug from vehicle AUX IN jack. 1. Bluetooth phone is connected and active/in call. iPod functionality is not present when phone is active/in call. 2. Bluetooth remote control profile is connected to phone instead of dongle. Hold the ‘-’ button down on the microphone until a tone is heard. Redo pairing procedure. Cannot adjust volume from iPod 1. Volume from Mazda Bluetooth Audio Transmitter is fixed. Adjust volume from vehicle’s audio system. Problem is still present. Refer to your Authorised Mazda Dealer, or call Lumen Australia on (03) 87871000 for further information. No iPod functionality through Bluetooth Kit. 14 Owner's Manual Part No: MZDA-A2DP-OM Bluetooth Mobile Phone Kit Owner's Manual Technical Specifications • Bluetooth 1.2 wireless technology, hands free system. • Wireless radio connection with the mobile phone. • Full duplex hands-free conversation with echo cancellation. • Background noise reduction. • Voice recognition dialling (if supported by the mobile phone). • Automatic muting of the car radio system when a call is active. • Operating button integrated with the vehicle styling. • Manual number dial. • Last number redial (if supported by the mobile phone). • Private mode. • Pairing of multiple phones (connection of one mobile phone at a time). • Profiles enabled HF, A2DP, AVRCP. FCC Notice Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. Owner's Manual Part No: MZDA-A2DP-OM 15 Bluetooth Mobile Phone Kit Owner's Manual Refer to your Mazda Dealer for further information. Please note that all information, illustrations and specifications in this Handbook are based on the latest product information available at the time of printing. Mazda reserves the right to make any changes at any time without notice and without incurring any obligation. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Mazda is under licence. Other trademarks and trade names are those of their respective owners. iPod is a trademark of Apple Inc., registered in the US and other countries. COPYRIGHT Mazda 2009 Reproduction in whole or part prohibited without written approval of Mazda Australia.Pty.Ltd. Owner's Manual Part No: MZDA-A2DP-OM
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Page Count : 16 Create Date : 2014:07:16 08:03:09+10:00 Modify Date : 2014:07:16 08:03:09+10:00 Producer : Corel PDF Engine Version 15.2.0.686 Author : Jason Kwan Creator : CorelDRAW X5 Title : MZDA-A2DP-OM - Mazda - A2DP BT OM - Issue XX - certification copyEXIF Metadata provided by EXIF.tools