Bury and Co KG PAG-BTBH Bluetooth Handset User Manual PCM3 US

Bury GmbH & Co KG Bluetooth Handset PCM3 US

UserManual.wiki >

Bury and Co KG >

PAG BTBH User Manual

User Manual

Dear Owner,in this operating manual you will learn about the various functions of the PCM (Porsche Communication Management) and the control options. Get acquainted with the operation of your PCM while the vehicle is at rest. In order to take advantage of its expanded scope of features, your full concentration is required during this learning process. In addition, attempting to drive while learning these functions will draw your attention away from the road, thus putting yourself and others at risk of an accident.On-board literatureKeep the on-board literature in the vehicle at all times and if you ever come to sell your vehicle, please hand it over to the new owner.SuggestionsDo you have any questions, suggestions, or ideas about your vehicle or the on-board literature? Please write to us:Dr. Ing. h.c. F. Porsche AGVertrieb Customer RelationsPorschestraße 15-1971634 Ludwigsburg GermanyOrientation aids in the operating manual This operating manual contains four orientation aids to help you quickly locate the information you require. They are each shown against a yellow background.The master table of contents offers you an overview of the structure of the entire manual. In the section table of contents you will find detailed listings of the individual topics.The index enables you to find the various topics with the help of keywords.At the back of the operating manual you will also find a glossary, where the terms and abbreviations used are explained.EquipmentThere may be some differences in equipment and technology with respect to the illustrations and descriptions due to the ongoing further development of the systems and the different laws in individual countries.The equipment versions shown are not always included as standard. Some of the functions described in this operating manual are optional equipment and may not be available in your PCM. If this is the case, the relevant menu items will not be available to you.WARNING!For your own protection and longer service life of your car, please follow all operating instructions and special warnings. These special warnings use the alert symbol, followed by the words Danger, Warning, Caution, & Notice. These special warnings contain important messages regarding your safety and/or the potential damage to your Porsche. Ignoring them could result in serious mechanical failure, serious personal injury or death.

2"Dr. Ing. h.c. F. Porsche AG is the owner of numerous trademarks, both registered and unregistered, including without limitation the Porsche Crest®, Porsche®, Boxster®, Carrera®, Cayenne®, Cayman™, Tiptronic®, VarioCam®, PCM®, 911®, 4S®, and the model numbers and distinctive shapes of Porsche's automobiles such as, the federally registered 911 automobile. The third party trademarks contained herein are the properties of their respective owners. Porsche Cars North America, Inc. believes the specifications to be correct at the time of printing. However, specifications, standard equipment and options are subject to change without notice. Some options may be unavailable when a car is built. Some vehicles may be shown with non-U.S. equipment. Please ask your dealer for advice concerning the current availability of options and verify the optional equipment that you ordered." Printed in Germany.Reprinting (including excerpts) as well as all forms of reproduction is prohibited without the written permission of Dr. Ing. h.c. F. Porsche AG.© Dr. Ing. h.c. F. Porsche AGPorscheplatz 170435 Stuttgart GermanyWKD 952 221 09 04/08

Table of contents 3Table of ContentsPCM Controls ...................................... 5Important information on operation and road safety ..............................................6Introduction to operation .................................7PCM Basic functions .....................................14Making personal settings...............................15TUNER............................................... 21Radio ...........................................................22Making settings for radio mode......................25Satellite radio ...............................................27DISC ................................................. 32CD-Audio/DVD-Audio/DVD-Video .....................33iPod* mobile digital device ............................39USB.............................................................42External audio source....................................46PHONE .............................................. 47Bluetooth®...................................................49Operating the Bluetooth hands-free unit(Bluetooth Mobile phone preparation) ............. 52Ringtone settings (Bluetooth Mobile phone preparation) ............. 60Bluetooth settings (Bluetooth Mobile phone preparation) ............. 61Phonebook settings(Bluetooth Mobile phone preparation)..............63Operating the PCM telephone.........................64Text messages (SMS)(with PCM telephone only) ..............................74Cordless handset(with PCM telephone only) ..............................80Telephone settings (PCM telephone)............................................88Call settings (PCM telephone)............................................89Bluetooth settings (PCM telephone)............................................92SIM settings (PCM telephone)............................................94Settings for messages and data (PCM telephone)............................................95INFO ................................................. 97Information ...................................................98Displaying traffic messages (XM NavTraffic)...........................................98Displaying sections of the route .................100Displaying information about the location..............................................100Displaying detailed information about the active audio source....................100Individual vehicle settings(only available for sports cars)..................... 101Rear view camera(only available for the Cayenne) ................... 104TRIP................................................ 106Trip computer (trip data display).................. 107Logbook.................................................... 108The Sport display(only available for sports cars)..................... 115NAVI ............................................... 121General operation....................................... 122Entering an address ................................... 124Starting and stopping route guidance .......... 125List of previous destinations........................ 126Personal destination memory ...................... 128Points of interest........................................ 131Changing options for route guidance ........... 133Stopovers (tour) ......................................... 136Destination input using geographical coordinates ........................... 138Off-road navigation ..................................... 139Storing ...................................................... 144MAP................................................ 145Map display ............................................... 146

4Table of contentsVoice Control ...................................150Learning about voice control........................ 151Basic functions of the voice control system................................... 154Operating examples.................................... 158Technical Data.................................170Radio frequency ranges............................... 171Tuning steps for automatic station search .............................171Regional codes for Video-DVDs ....................171Glossary ..........................................172Index...............................................175

PCM Controls 5PCM ControlsImportant information on operation and road safety............................................. 6Introduction to operation................................ 7Operating functions using the touchscreen .......................................... 7Operating functions using the right rotary knob s............................... 7Controls and their functions.......................... 8Operating menus ....................................... 11Operating lists ........................................... 11Operating selection boxes (checkboxes)...... 12Operating radio buttons.............................. 12Operating input menus ............................... 13PCM Basic functions.................................... 14Switching the PCM on and off ..................... 14Setting the volume..................................... 14Making personal settings ............................. 15Selecting the audio source ......................... 15Configuring the PCM display ....................... 15Making display settings .............................. 17Making sound settings ............................... 18Resetting personal settings ........................ 20Displaying the system version ......................... 2

6PCM ControlsImportant information on operation and road safetyThe PCM (Porsche Communication Management) is the central control unit for the radio, disc mode (CD/DVD, USB, iPod, and an external audio source), sound settings, on-board computer, navigation system, and telephone. To avoid danger or injury to yourself and others while using your PCM, you must take the following into consideration:WARNING!Accident hazard. The distraction could result in you losing control of the vehicle.ûOperate your PCM only if you are safely in control of your vehicle and when the traffic conditions permit. If in doubt, stop the car and operate the PCM while the vehicle is parked.WARNING!Injury hazard. Opening the housing or a damaged housing represents a hazard due to invisible laser radiation.ûThe PCM is a Class 1 laser product. Do not open the housing. The PCM does not contain any user-serviceable parts. Any maintenance work must be performed exclusively by qualified service personnel.WARNING!Accident hazard. The navigation system serves only to assist the driver and provide a suggestion for the route of the journey. This does not release you from complete responsibility for your correct conduct in traffic according to the Road Traffic Regulations or other relevant regulations.As the driver, you must assess the particular traffic situation. You alone bear the full responsibility for road safety.ûContinue to pay attention to the traffic situation.WARNING!Serious personal injury or death. The telephone must not be used near explosives or flammable materials (e.g. at a gas station) or near operations involving explosives. Cell phones must be switched off in certain hazardous areas such as near gas stations, fuel depots, chemical plants, and demolition work in progress using explosives, for example. The electric spark from the cell phone could ignite chemical vapors near these hazardous areas, which could result in serious personal injury or death.ûFollow corresponding instructions.ûObserve statutory regulations and local restrictions when using the telephone.

PCM Controls 7Introduction to operationOperating functions using the touchscreenThe display of the PCM is a color touchscreen for easy and user-friendly operation of the menus. You can operate all menu functions, list entries, and text input fields as well as the arrow symbols and scrollbars by lightly touching the corresponding location on the display. Touchscreen disabledIf the menu functions cannot be operated by touching the display, it is because the touchscreen is disabled.Proceed as follows to enable the touchscreen:1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PCM system" >"Display">"Display".4. Select "Touchscreen off" to enable ( ) or disable ( ) the function.Operating functions using the right rotary knob sIn parallel with operation on the display, you can also operate all menu functions, list entries, and text input fields using the right rotary knob s:– Turn the right rotary knob q:to highlight a menu item– Press the right rotary knob r:to select a menu itemNOTICERisk of damage. The PCM contains high-quality electronic components which require special care with regard to maintenance. The following should be noted:– The display scratches easily.– The device must not be sprayed with liquids. Entrance of liquids into the unit can result in the destruction of the equipment.ûCarefully clean your PCM periodically using a dry, clean, and soft cloth (micro-fiber cloth) or a cleaning brush.>>>ûDo not exert excessive pressure on the surface when cleaning.ûUnder no circumstances use solvents such as methylated spirits, thinners, gasoline, acetone as well as alcohol (ethanol, methanol, or isopropyl alcohol) or scouring agents of any type.ûClean fingerprints using a slightly damp cloth or a mild cleaning agent. ûNever spray cleaning agents or other liquids directly onto the display. Moisten a cloth and then carefully wipe the display.ûIf faults occur, do not open the PCM equipment yourself under any circumstances. Always have defective units repaired by a qualified specialist workshop. We recommend that this work be performed by an authorized Porsche dealership, as these have trained workshop personnel as well as the necessary parts and tools.At particularly low temperatures, the maximum brightness of the display is only reached after a few minutes.

8PCM ControlsControls and their functionsThe controls of the PCM are arranged around the display as well as around the CD/DVD slot.A Left rotary knob v t: Sets the volumeu (short): Switches on or mutes the deviceu (long): Switches the device on and offBa buttonCb buttonD m, n, c, d, e, f, and g main menu buttons E Right rotary knob s q: Highlights a menu itemr: Selects the highlighted menu item F Back button hGi button H Arrow buttons p and o I Lift receiver button l and End call button k J TouchscreenKSlot for SIM card L Eject/retract button for CDs and DVDs j

PCM Controls 9A- Left rotary knob v By pressing and holding the left rotary knob u, you switch the device on or off.By turning the left rotary knob t, you change the following settings:– volume of the active audio source,– volume of a driving recommendation announcement,– volume of a traffic announcement,– volume of a voice control announcement,– volume when in hands-free mode during a telephone call,– ring volume of the telephone during an incoming call,– cancellation of the mute function (turning the rotary knob to the right).By briefly pressing the left rotary knob u, you execute the following functions:– cancel navigation and traffic announcements,– reject an incoming telephone call,–mute the device,– switch the system on.B- a buttonBy pressing the a button, you open a window where you can set the current audio source.The window closes again:– once you have selected an audio source,– if a few seconds pass without any input from you.C- b buttonBy pressing the b button, you open a menu where you can make the sound settings for the PCM.D-Main menu buttons Under the display are the so-called main menu buttons. You use these buttons to call up the following main menus:–m: radio main menu,–n: disc main menu, –c: phone main menu, –d: information menu, –e: trip data display, –f: navigation main menu,–g: map display. You can switch from one main menu to another at any time. If you return to a main menu, you return to the function you were using before you exited that menu. If you wish to return to the top level of a main menu, you must press the relevant main menu button twice. E-Right rotary knob s Apart from the touchscreen, the right rotary knob is the central control. By turning the rotary knob q, you highlight the desired menu item. By pressing r, you select a highlighted menu item.

PCM Controls 11L- Eject button jBy pressing the j button, you execute the following functions depending on the equipment of your PCM:PCM without CD/DVD changer – A CD or DVD inserted in the drive is ejected and can be removed.PCM with CD/DVD changer – The CD/DVD changer menu is opened. By pressing the button again, the highlighted CD or DVD is ejected and can be removed.– If you press the button for a number of seconds and there are no CDs/DVDs in the changer compartments yet, you will be prompted to fill the individual compartments one after the other.– If you press the button for several seconds and the magazine compartments are at least partially filled, all CDs or DVDs will be ejected one after the other.Operating menusThe menu is operated using the touchscreen or using the right rotary knob s as well as the h button.Activating/selecting a menu itemûTouch the menu item on the display.- or - ûHighlight the menu item by turning the right rotary knob q and then activate it by pressing the rotary knob r.The process of highlighting q and activating r using the right rotary knob or touching the menu item on the display is referred to below as "selecting".Exiting a menuûPress the h button to get to the next higher level in the menu.- or - ûPress a main menu button to return to a main menu.Operating listsSelecting certain menu items calls up lists. Depending on the context, individual or multiple entries in these lists can be selected. Navigating in listsThe following control options are available to you for selecting a list entry:ûtouch the symbols and on the display,ûtouch the scrollbar between the two symbols and ,ûturn the right rotary knob q.Highlighted list entries are framed in orange.

12 PCM ControlsShowing the first letter of the list entriesYou can show the first letter of list entries to make it easier to find your way in long lists. This function is available with the following lists:– the phonebook,– the list for the music search in the iPod or in USB mode, or– the track list in iPod, USB, and MP3 mode.Only letters with corresponding entries in the list will be displayed.ûTouch one of the two symbols and for several seconds.- or - ûQuickly turn the right rotary knob q.Operating selection boxes (checkboxes)Some menu items have a box. These menu items represent a function that you can activate or deactivate by selecting (checking) the box. : Function switched on/activated : Function switched off/deactivatedOperating radio buttonsIf a menu item has a circle instead of a box, this is what is called a radio button.In contrast to the functions of checkboxes which can be freely combined, radio buttons can only activate one menu item at a time.Like checkboxes, radio buttons are activated or deactivated by selecting them. You can tell an activated radio button by the solid circle.

PCM Controls 13Operating input menusMany functions require you to enter data into the PCM. These functions include: SMS text, a telephone number, a telephone number, or a navigation destination, for example. The various input menus are adapted to the respective operating situation.ûTo enter data in an input menu, lightly touch the characters on the display.- or - ûHighlight the characters by turning the right rotary knob q and insert by pressing the right rotary knob r.ûSelect the OK field to confirm and accept the entered data.In addition to the letter fields, the input menus also provide a number of function fields for changing the character set displayed and for moving the cursor. Characters shown in gray cannot be selected.Arranging letter fields in the input menuThe letter fields in the input menu can either be arranged alphabetically or in accordance with a computer keyboard. To find out more, please refer to the section "Setting the layout for the input menu keyboard" on page 17.Deletes the last character entered(if the button is selected briefly)- or -deletes all entered characters(if the button is selected and held)Switches to positioning modeABC Switches to uppercase lettersabc Switches to lowercase letters123 Switches to numbers and punctuation marks@&# Switches to special symbolsSwitches to insertion mode when composing a text message SPACE Inserts a spaceCLEAR Deletes all entries in the input fieldLIST Calls up a stored list, for example when entering addresses for the navigation systemOK Confirms the entry and closes the input menu

14 PCM ControlsPCM Basic functionsSwitching the PCM on and offSwitching on and off via the ignitionûSwitch on the ignition.The PCM is permanently active.If the PCM was previously switched off using the left rotary knob (volume control), this knob must be pressed again after the ignition is switched on.Switching on and off via the left rotary knobûPress the left rotary knob (volume control) for a few seconds.Battery discharge protectionYou can switch the PCM on and off via the left rotary knob even when the ignition is off.If the ignition is switched off, the PCM will automatically switch itself off after a factory-set time.Setting the volumeChanging the volumeûTurn the left rotary knob t.Depending on the situation, you can change the volume– of the active audio source,– of a driving recommendation announcement,– of a traffic announcement,– of a voice control announcement,– when in hands-free mode during a telephone call,– of the telephone ringtone during an incoming call.Muting the deviceûBriefly press the left rotary knob u.The active audio source is muted. The mute icon can be seen in the bottom line.Navigation recommendations, telephone calls, and traffic program announcements are still audible.ûTo cancel muting, briefly press the left rotary knob u again.ûTo interrupt a navigation or traffic announcement, press the left rotary knob u during the announcement.

PCM Controls 15Making personal settingsSelecting the audio sourceBy pressing the a button, you open a window where you can set the current audio source.The window closes again:– once you have selected an audio source,– if a few seconds pass without any input from you.1. Press the a button.2. Select the desired audio source on the display.Always displaying all audio sources in the windowThe audio sources "iPod" and "USB" are only displayed if there is a corresponding device connected to the interface. If both of these audio sources are always to be displayed (even if there is no device connected to the PCM), you must activate their display in the SET menu.You can also activate or deactivate the audio source "AUX" (external audio source) in the SET menu.1. Press the n button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET DISC / AUX".You will only be able to access the "SET DISC / AUX" menu if there is at least one CD/DVD inserted or at least one audio source activated () in the menu.4. Select the appropriate audio source to activate ( ) or deactivate ( ) its display.Configuring the PCM displayYou can set various units, the date and time, the welcome display as well as the operating language of the PCM in the "Regional settings" menu.Setting the language1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PCM system" >"Regional settings" >"Language".4. Select the desired language.Setting the date(can only be set if the PCM is not equipped with a navigation system)1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PCM system" >"Date & time" >"Date".4. Set the date by selecting the corresponding numerical fields.

16 PCM ControlsSetting the display format for the date1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PCM system" >"Date & time" >"Date format".4. Select the desired display format.Setting the time zone1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PCM system" >"Date & time" >"Time zone".4. Select the desired time zone.Setting the time1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PCM system" >"Date & time" >"Time".4. Set the time by selecting the corresponding numerical fields.Setting the display format for the time1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PCM system" >"Date & time" >"12h / 24h".4. Select the desired display format.Setting daylight saving time1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PCM system" >"Date & time".4. Select "Daylgt. saving time" to activate ( ) or deactivate ( ) the function.Setting the unit for distances1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PCM system" >"Regional settings" >"Distance".4. Select one of the two options "km" or "mls".

PCM Controls 17Setting the unit for consumption1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PCM system" >"Regional settings" >"Consumpt.".4. Select one of the following units:–"l/100km",–"km/l",–"mpg", or–"mpg (UK)".Setting the display unit for temperatures1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PCM system" >"Regional settings">"Temperature".4. Select one of the two units "°C (Celsius)" or "°F (Fahrenheit)".Setting the layout for the input menu keyboard1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PCM system" >"Display" >"Keyboard layout".4. Select one of the two options:–"ABC": The letter fields are arranged alphabetically.–"QWERTY/QWERZ": The letter fields are arranged like a computer keyboard.The chosen keyboard layout is set.Making display settingsSwitching the display offYou can switch off or darken the display using the "Switch off display" menu.1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PCM system" >"Display">"Display".4. Select "Switch off display".5. Confirm the prompt that appears.Switching the display back onYou can switch a display that is off back on at any time (if the touchscreen is active) by touching it.ûTouch your finger anywhere on the display.- or -ûPress any button.

18 PCM ControlsChoosing the colors for the map display (day/night design)1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PCM system" >"Display".4. Select "Day/night switchover".The following options are then available for you to select:–"Automatic"Your PCM automatically switches from day design to night design as a function of the vehicle lighting.–"Day"Your PCM always remains set to the day design colors. This means the display colors are optimized for legibility.–"Night"Your PCM always remains set to the night design colors. The display colors are shown dimmed to prevent any dazzle effect.5. Set the desired option by selecting it.Choosing the brightness of the display1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PCM system" >"Display">"Display">"Brightness".4. You can set the brightness by selecting the two symbols and .Switching the touchscreen on and off1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PCM system" >"Display">"Display".4. Select "Touchscreen off" to activate ( ) or deactivate ( ) the function.Making sound settingsYou can define the sound of your PCM for each audio source using the sound settings in the Sound menu. As soon as an audio source is selected, your sound settings are automatically set.The scope of the display and functions for the sound settings depends on the vehicle model and the respective equipment. In some cases, therefore, not all the functions described here will be available.Setting the bass1. Press the b button.2. Select "Bass".3. Make the desired setting by selecting the two symbols and .Setting the treble1. Press the b button.2. Select "Treble".3. Make the desired setting by selecting the two symbols and .

PCM Controls 19Setting the balanceYou set the volume distribution between the left and right speakers using the Balance setting.1. Press the b button.2. Select "Balance".3. Make the desired setting by selecting the symbols , , , and .Setting the faderYou set the volume distribution between the front and rear speakers using the Fader setting.1. Press the b button.2. Select "Fader".3. Make the desired setting by selecting the symbols , , , and .Setting the loudness"Loudness" increases the sound volume by increasing the bass.This setting is especially suitable for low-volume settings and guarantees full bass reproduction.1. Press the b button.2. Select "Loudness" to activate ( ) or deactivate ( ) the function.SDV (speed-dependent volume)The "SDV" function automatically adapts the audio playback volume as a function of the vehicle's speed.You can set the adaptation of the volume to the vehicle's speed on a scale from 0 (no increase in volume) to 5 (large increase in volume).1. Press the b button.2. Press the i button or touch the tab of the same name in the header.3. Select "SDV".4. Make the desired setting by selecting the symbols and .Surround (with Bose® sound system)Activating "Surround" achieves a sound setting with greater spatiality. This permits the creation of a so-called virtual surround sound with conventional stereo sources such as CDs, radio, or MP3 formats, for example. The function can be set separately for the individual audio sources.The "Surround" function is generally activated with multi-channel sources such as 5.1 DVDs, for example.It cannot be activated with the "AM" source.1. Press the b button.2. Press the i button or touch the tab of the same name in the header.3. Select "Surround" to activate ( ) or deactivate ( ) the function.

20 PCM ControlsLinear (with Bose® sound system)Selecting "Linear" switches the PCM from a sound setting with a heavy bass (linear off) to a more neutral sound setup (linear on).1. Press the b button.2. Press the i button or touch the tab of the same name in the header.3. Select "Linear" to activate ( ) or deactivate ( ) the function.AudioPilot (with Bose® sound system)If the "AudioPilot" function is switched on, the noise level in the interior of the vehicle is monitored. Background noise is analyzed using a filter and playback of the music is automatically adapted not just in terms of volume, but also in terms of the dynamics of the overall frequency spectrum.Vehicles with convertible tops are additionally equipped with extended sound control. This adjusts the playback of the music according to the special requirements when driving with the top down.1. Press the b button.2. Press the i button or touch the tab of the same name in the header.3. Select "AudioPilot" to activate ( ) or deactivate ( ) the function.Resetting personal settingsThis menu item allows you to reset settings you have previously made.1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PCM system" >"Reset".4. Select one of the following options: –"Factory settings" Resets all settings to predefined values. Any data you entered (addresses, destinations, and telephone numbers) is, however, retained.–"Vehicle handover" Resets all settings to predefined values and deletes the data you entered (addresses, destinations, and telephone numbers).5. Confirm the relevant prompt by selecting "Yes".Displaying the system versionThis menu item allows you to view the system version of your PCM.1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PCM system" >"Display" > "System version".The system version is displayed.

TUNER 21TUNERRadio ......................................................... 22Calling up the main menu for radio mode .......................................... 22Tuning to stations ...................................... 22Storing stations on station buttons in the preset memories .............................. 23Traffic program ......................................... 24Making settings for radio mode .................... 25Switching RBDS on and off ......................... 25Switching RDS radio text on and off ............ 25Setting sort criteria for the FM station list............................................ 25Satellite radio.............................................. 27Setting the mode in radio mode .................. 28Tuning to channels..................................... 28Storing channels on the station buttons in the preset memories........ 29Searching for music................................... 30Selecting categories for the music search............................................. 30Storing favorite songs................................ 30Configuring the display of the icon for your favorite songs............................... 31Switching information about the program on and off .............................. 31

22 TUNERRadioCalling up the main menu for radio modeûKeep pressing the m button until the desired mode (AM - FM - SAT) is highlighted in the bottom line.You will see the main menu for the chosen mode together with the station buttons. If there are already stations stored on the station buttons, the names or frequencies of these stations are displayed.If the station tuned to is broadcasting RDS signals (RDS = Radio Data System) in FM mode, you will see the information contained in these signals (e.g. station name, program type, and radio text) above the station buttons.To find out more, please refer to the sections "Switching RBDS on and off" on page 25 and "Switching RDS radio text on and off" on page 25.Tuning to stationsYou have the following options for tuning to a station:– using the station buttons, – using the station list, – using a station search, or – by entering the frequency directly.Tuning to stations using the station buttonsTo be able to tune to a station using the station buttons, there must already be a station stored on a station button. To find out more, please refer to the section "Storing stations on station buttons in the preset memories" on page 23.1. Keep pressing the m button until the desired mode is highlighted.2. Briefly press the station button.The station stored on the station button is tuned to.Tuning to stations using the station listThe station list contains all the stations that can currently be received. It is only available in FM mode.1. Keep pressing the m button until "FM" is highlighted.2. Press the i button or touch the tab of the same name in the header.3. Select "Station list".The station list is opened. In addition to the station names, it also contains the respective program types. The station currently tuned to is highlighted in color.4. Select a station.- or -Tune to the next station from the station list by pressing the arrow buttons p and o.Tuning to stations using the station searchûStart a search by pressing the arrow buttons p and o.The search stops at the next station in the waveband.

TUNER 23Tuning to stations by scanningIf you activate this function, every station found in the frequency range is played for approx. 5 seconds.1. Keep pressing the m button until the desired mode is highlighted.2. Press the i button or touch the tab of the same name in the header.3. Select "Start scan".Each station in the frequency range is played for approx. 5 seconds.4. Select "Stop scan" to tune to a scanned station.Tuning to stations by entering the frequency directly1. Keep pressing the m button until "FM" is highlighted.2. Select "Manual tune".The input menu is opened. The frequency of the current station is displayed.3. Tune to the frequency using one of the following options:– entering it directly by selecting the number buttons- or - – tuning to the next station from the station list by touching the symbols and on the display- or - – turning the rotary knob q to change the frequency upwards or downwards.A valid frequency is tuned to as soon as it is input. Storing stations on station buttons in the preset memoriesSetting the preset memoryThere are six memory locations available in each of the preset memories. The preset memories for radio mode are:– In FM mode:FM 1, FM 2, FM 3, BEST FM, and MIXED–In AM mode:AM 1, AM 2, and MIXEDIn contrast to all other preset memories, in the MIXED preset memory you can store stations and channels in different modes. This means you can store stations from FM mode and AM mode as well as stations from TV mode here.The PCM automatically fills the station buttons for the Best FM preset memory with the stations with the strongest reception at regular intervals.

24 TUNER1. Keep pressing the m button until the desired mode is highlighted.2. Select "Preset memory".The available preset memories are listed.3. Select the desired preset memory.4. Touch the m tab in the header again.Choosing a station in the station list and storing it1. Keep pressing the m button until "FM" is highlighted.2. Press the i button or touch the tab of the same name in the header.3. Select "Station list".4. Select the desired station entry by pressing it for a few seconds.The station buttons are displayed and the station previously chosen is shown in the information window.5. To store the station on a station button, select the desired station button.The station list is displayed once more.Storing via an automatic station search (autostore)The automatic station search function is only available for the preset memories FM 1, FM 2, FM 3 as well as AM 1 and AM 2.1. Keep pressing the m button until the desired mode is highlighted.2. Set the preset memory if applicable (> page 23).3. Select the "Autostore" menu item.The search starts. It stores the six stations with the strongest signals and tunes to the one with the strongest signal.Manually storing stations1. Keep pressing the m button until the desired mode is highlighted.2. Tune to the station (> page 22).3. Set the preset memory if applicable (> page 23).4. Press and hold the station button for a few seconds.As soon as the station is stored on the station button, the station name or the station frequency is displayed on the button and you hear an audible signal.Traffic program Various FM radio stations broadcast traffic messages in addition to their radio program.The broadcasting stations are responsible for the quality of these traffic messages. For that reason, no liability can be accepted for the completeness and correctness of the information.Traffic messages are part of the RBDS signals and are not available everywhere. To find out more, please refer to the sections "Switching RBDS on and off" on page 25.Turning the traffic program on1. Keep pressing the m button until FM is highlighted. 2. Press the i button or touch the tab of the same name in the header.3. Select "Traffic prog." to switch the function on ( ) or off ( ) .When the traffic program is switched on, you will hear the traffic messages regardless of the audio source playing at the time.

TUNER 25Setting the Traffic prog. volume The traffic program volume refers to the volume at which the traffic program announcements are output.It specifies the minimum volume as a function of the volume of the currently selected audio source. 1. Press the b button.2. Press the i button or touch the tab of the same name in the header.3. Select "Traffic prog.".4. Make the desired setting on the scale by selecting the two symbols and .Making settings for radio modeSwitching RBDS on and offThe PCM is capable of receiving and evaluating RBDS signals (RBDS = Radio Broadcast Data System) in FM mode. It supports the following functions: – station name, – program type (PTY), –traffic program, – radio text as well as – detection of alternative frequencies. (Radio stations transmit programs with the same program content on different frequencies in different regions.)You can switch tracking of these alternative frequencies on and off in the Set menu.1. Keep pressing the m button until FM is highlighted. 2. Press the i button or touch the tab of the same name in the header.3. Select "SET FM".4. Select "RBDS" to switch the function on ( ) or off ( ).Switching RDS radio text on and off1. Keep pressing the m button until FM is highlighted. 2. Press the i button or touch the tab of the same name in the header.3. Select "SET FM".4. Select "Radio text" to switch the function on ( ) or off ( ).Setting sort criteria for the FM station listThe FM station list can be sorted according to different criteria. You can set the sorting as follows:1. Keep pressing the m button until FM is highlighted. 2. Press the i button or touch the tab of the same name in the header.3. Select "SET FM".4. Select "Sort criteria".You can then select various radio buttons:–Station strength: The station list is displayed sorted according to field strength. Stations with good reception are shown at the top of the list.

26 TUNER–Last stations: The station list shows the last stations listened to. The last station listened to is shown at the top of the list.–Frequency: The station list is displayed sorted according to the order of the stations in the frequency band.5. Set the desired sorting option by selecting it.

TUNER 27Satellite radioSatellite radio offers the reception of a multitude of stations - all in digital (CD) quality. The provider XM Satellite Radio offers a wide range of programs - music, sports, news, and entertainment, some without the interruption of advertisements. XM Satellite Radio offers over 170 channels from coast to coast.Dr. Ing. h.c. F. Porsche AG is not responsible for the content offered by the broadcasters.The number of satellites and their location in orbit ensures broad coverage and reception 24 hours a day, seven days a week.When reception is blocked by buildings or lanes with many overhanging trees, the receiver may be muted occasionally. There may also be problems with reception if you have mounted a roof-top carrier or similar object on your car. To make it easier to find that one program you want without having to sift through them all, the various stations are divided into what are known as categories. These categories make it possible to select a station by the category of program that it is broadcasting.If you are not already receiving XM service:– Obtain your 8-digit XM Radio ID from your PCM (see next chapter)– Contact XM by calling 1-800-XMRADIO (1-800-967-2346) to request activation– Begin enjoying the complimentary trial period.To use the service described above, you must sign up with the provider XM Satellite Radio.When selecting a service for the first time, you must request that the provider enable it. The description of the individual menu items reflects the information available at the time this manual was prepared.Enabling the system to receive the serviceTo have your system enabled to receive the service, you must supply the provider with your system's ID number, which you will find in the SAT Settings menu.1. Set "SAT" mode.2. Press the i button or touch the tab of the same name in the header.3. Select "SET XM"> "Radio ID". The radio ID number is displayed. Once the device is enabled by the provider, you will be able to use the service after a short loading time. XM Satellite Radio may request payment of an additional fee to enable certain channels. If you select one of these channels, a message will be displayed with a telephone number which you must call if you wish to have the channel enabled.

28 TUNERSetting the mode in radio modeûKeep pressing the m button until the audio source SAT is highlighted in the bottom line.The station buttons for satellite radio mode are displayed once you have set "SAT" mode. If there are already channels stored on the station buttons, the names of these channels are displayed there. The last channel tuned to is highlighted and is playing.Tuning to channelsYou can tune to the desired channel using the station buttons, the channel list, a search, or by entering the channel directly.Tuning to channels using the station buttons1. Set "SAT" mode.2. Briefly press the station button. The channel is tuned to.To be able to tune to a channel using the station buttons, there must already be channels stored on the station buttons. To find out more, please refer to the section "Storing channels on the station buttons in the preset memories" on page 29.Tuning to channels by manually entering the channel number1. Set "SAT" mode.2. Select "Direct tune". The input menu is opened. The channel number of the channel currently tuned to is displayed.3. Tune to the channel number using one of the following options:– entering it directly by selecting the number buttons,– tuning to the next channel from the channel list by touching the symbols and on the display,– turning the rotary knob q to change the channel number upwards or downwards. As soon as a valid channel number is input, it is tuned to. Tuning to channels by searchingûStart a search by pressing the arrow buttons p and o. The search stops at the next available channel.

TUNER 29Choosing channels from the channel list and tuning to themThe channel list contains the channels from various categories that can currently be received. It is sorted by channel numbers and in addition to the channel names, also contains the categories to which the channels belong. The satellite radio channels are divided into various categories. These categories allow the channels to be divided into genres such as "Decades", "Rock", or "Sports". By selecting specific categories, you can determine the composition of the channel list yourself and make the list easier to search. To find out more about selecting individual categories, please refer to the section "Selecting categories for the music search" on page 30.1. Set "SAT" mode.2. Press the i button or touch the tab of the same name in the header.3. Select "Channel list". The channel list is opened. The channel currently tuned to is highlighted in color.4. Select the desired channel.Storing channels on the station buttons in the preset memoriesIn each of the following preset memories there are six memory locations available where you can store stations:–SAT 1, SAT 2, SAT 3 and MIXED.In contrast to all other preset memories, in the MIXED preset memory you can store stations and channels in different modes. This means you can store stations from FM mode and AM mode as well as channels from SAT mode here. 1. Select "Preset memory". The available preset memories are listed.2. Select the desired preset memory.Manually storing channels1. Set "SAT" mode.2. Tune to the channel.3. Set the preset memory if applicable.4. Press and hold the station button for a few seconds. As soon as the channel is stored on the station button, the name of the channel is displayed on the button. Storing channels from the channel list1. Set "SAT" mode.2. Press the i button or touch the tab of the same name in the header.3. Select "Channel list".4. Select the desired channel by holding it for a few seconds. The station buttons are displayed and the channel previously selected is shown in the information window.5. Select a station button to store the channel on it.

30 TUNERSearching for musicIf you have already selected specific categories, the music search will be restricted to channels in these categories. To find out more about selecting individual categories, please refer to the section "Selecting categories for the music search" on this page.Searching for music by title1. Set "SAT" mode.2. Press the i button or touch the tab of the same name in the header.3. Select "Search by title". You will then see a list of all titles currently being played in the channels in the selected categories.4. Select the desired title. The channel is tuned to and the title played. Searching for music by artist1. Set "SAT" mode.2. Press the i button or touch the tab of the same name in the header.3. Select "Search by artist". You will then see a list of all artists currently being played in the channels in the selected categories.4. Select the desired artist. The channel is tuned to and the corresponding title played. Selecting categories for the music search1. Set "SAT" mode.2. Press the i button or touch the tab of the same name in the header.3. Select "Category list". The list of categories is opened. 4. Select the desired categories. Storing favorite songsIn the "Favorite" list you have the option of storing 50 of your favorite songs. If one of these songs is played on any channel, the icon will be displayed beside the "Favorite" menu item. If this happens, you can open the list of your favorite songs by selecting the menu item. The songs currently being played in one of the channels are identified with the icon. Selecting the song tunes to the corresponding channel.Displaying the favorite list 1. Set "SAT" mode.2. Press the i button or touch the tab of the same name in the header.3. Select "SET XM" > "Favorite" > "Favorite list". The list of stored favorite songs is opened.- or - 1. Select "Favorite" if the icon is displayed in satellite radio mode. Storing titles to the favorite list1. While satellite radio is playing, press the i button or touch the tab of the same name in the header.2. Select "SET XM" > "Favorite" > "Store as favorite".- or - 1. While satellite radio is playing, select and hold the "Favorite" menu item for a few seconds.

TUNER 31Deleting titles from the favorite list1. Set "SAT" mode.2. Press the i button or touch the tab of the same name in the header.3. Select "SET XM" > "Favorite" > "Delete favorites".4. Select the desired title to delete.5. Confirm the prompt that appears by selecting "Yes". The title is then deleted from the list. Configuring the display of the icon for your favorite songsYou can choose when the icon alerts you to one of your stored favorite songs in the current program:–"Alert by title"The icon is displayed as soon as a title from the list of favorites is played by a channel.–"Alert by artist"The icon is displayed if a track by an artist in the list of favorites is played by a channel.1. Set "SAT" mode.2. Press the i button or touch the tab of the same name in the header.3. Select "SET XM" > "Favorite".4. Select the desired option. Switching information about the program on and off1. Set "SAT" mode.2. Press the i button or touch the tab of the same name in the header.3. Select "SET XM"4. Select "Infotext" to activate ( ) or deactivate ( ) the function.

32 DISCDISCCD-Audio/DVD-Audio/DVD-Video .................... 33Loading or ejecting CDs/DVDs ....................34Calling up the main menu for CD/DVD mode ...........................................36Selecting a CD/DVD ...................................36Selecting a track ........................................36Selecting a track (MP3-CD/DVD) ..................36Selecting a chapter in Video-DVD mode........ 37Setting the audio format for Video-DVD ........37Setting audio groups (DVD-Audio).................38Skipping to the previous/next track .............38Fast forward/reverse.................................. 38Repeating a track .......................................38Switching the shuffle function on and off ......38Starting/stopping scanning .........................38iPod* mobile digital device ........................... 39Calling up the main menu for iPod mode ......39Searching for tracks................................... 40Playlists.....................................................40Track list ...................................................41Skipping to the previous/next track .............41Fast forward/reverse.................................. 41Repeating a track .......................................41Switching the shuffle function on and off ......41USB............................................................ 42Calling up the main menu for USB mode .................................................43Searching for tracks ...................................43Track list ...................................................44Skipping to the previous/next track .............44Fast forward/reverse..................................44Repeating a track .......................................44Switching the shuffle function on and off ..................................................44Starting/stopping scanning .........................45External audio source................................... 46Calling up the main menu for the external source.....................................46

DISC 33CD-Audio/DVD-Audio/DVD-Video Notes on copyrightIn principle, you are only allowed to create copies of CDs/DVDs for your own private use. The copyright exceptions do not cover circulation of the duplicated CDs/DVDs to third parties.The music tracks that you can create for and play in MP3 mode are generally copyright-protected under the applicable international and national laws. In many countries, the reproduction of copyrighted material is not permitted, even if only for personal use, without the express prior consent of the copyright holder. Please check the current copyright laws for your country and comply with them. These restrictions do not apply to your own compositions and recordings, for example, or to recordings for which authorization has been obtained from the copyright holder.In either case the legal situation is in force!Notes on the media supportedTo avoid problems when playing your MP3 CDs/DVDs, please observe the following notes:– Permissible discs:CD-R and CD-RW (650 MB and 700 MB)DVD+R and DVD+RWDVD-R and DVD-RW– Permissible file systems:CD ROM (Yellow Book) / ISO 9660 Level 1 / Joliet for CD (file name up to max. 64 characters)– Permissible file structures:The maximum number of tracks per disc is 4,000.A disc may hold a maximum of 2,000 folders in total.Each folder in turn may contain a maximum of 1,000 tracks.The maximum directory depth is 11 levels.Warranty claims on PCM units will not be accepted in cases where the PCM cannot play poor quality, user-burned CDs/DVDs, CDs of other formats, Mixed Mode CDs, CD-Extra CDs, and multi-session CDs/DVDs.CDs/DVDs that have not been finalized cannot be played.If a non-standard-compliant CD/DVD is inserted, such as DVD Plus (audio CD on one side, DVD on the other), the increased thickness of the medium may lead to irreparable damage to the drive.CAUTION!Risk of damage.Sound interruptions may occur if the CD/DVD is dirty. In order to ensure optimum sound quality, please note the following:ûAlways touch the CD/DVD at the edges only. Never touch the side without writing and keep the CD/DVD clean.ûNever stick anything on the CD/DVD.ûProtect the CD/DVD against direct sunlight and from heat sources such as heaters, etc. ûBefore playing the CD/DVD, it should be cleaned with a special, commercially available cleaning cloth, wiping from the center outwards. Solvents such as gasoline, thinners, or other commercially available cleaning agents and anti-static sprays must not be used.ûDo not bend the CD/DVD.The system may not be able to play copy-protected audio CDs/DVDs or CDs with CD ROM sections that do not correspond to the audio CD standard.

34 DISCNotes on DVD modeVideo-DVDs generally feature a regional code. You will find the details of this either on the DVD cover or on the DVD itself.The CD/DVD drive of the PCM 3 detects the respective regional code of the Video-DVD inserted. As per the "Regional Protection Code", it allows you to change the regional code up to five times. Please contact your authorized Porsche dealer to find out how to change the regional code.You will find a list of regional codes in the section "Regional codes for Video-DVDs" on page 171.When playing Video-DVDs, only playback of the audio information is supported.Some of the Video-DVDs you find in stores may not conform to the standards. You may experience sound or other playback problems with these DVDs.Discs, DVD authoring software, burning software, and burners are widely available. Due to this wide availability, we cannot guarantee that the CD/DVD drive of the PCM 3 will be able to play every user-burned Video-DVD.Audio formats supportedThe PCM supports the following audio formats:*) Because of the multitude of different audio programs (encoder) a general possibility of playing all MP3-, WMA- and AAC-formats can not be guaranteed.**) Manufactured under license in accordance with U.S. patent numbers 5.451.942, 5.956.674, 5.974.380, 5.978.762, 6.487.535, and other patents granted and registered in the USA and worldwide. DTS and DTS Digital Surround are registered trademarks, and the DTS logos and the DTS symbol are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All rights reserved.***) The double D symbol is a legally protected trademark of Dolby Laboratories. Manufactured under license from Dolby Laboratories.****) MLP LosslessTH is a trademark of Dolby Laboratories. Manufactured under license from Dolby LaboratoriesLoading or ejecting CDs/DVDsLoading a disc at PCM with CD/DVD driveûPush the CD/DVD into the slot.The printed side of the CD/DVD must face upwards.Ejecting a disc at PCM with CD/DVD driveûBriefly press the j button.The CD/DVD is stopped and ejected.MP3 * (MPEG-1 Audio Layer 3)WMA * (Windows Media Audio)AAC-LC * (Low Complexity Advanced Audio Coding)DTS ** (Digital Theater Systems) Dolby® Digital *** Meridian Lossless Packing ****

DISC 35Select the CD/DVD changer menuûBriefly press the j button.The CD/DVD changer menu is displayed. A button is displayed for each compartment in the changer magazine.If there is a CD or DVD in a compartment, on the button you will see the compartment number and, if available, the title of the CD/DVD.If the name of the CD/DVD is not available, the disc format (CD-DVD) is shown instead.If a magazine compartment is empty, "empty" is shown beside the compartment number on the display.Loading a disc at PCM with CD/DVD changerIncorrectly inserted CDs/DVDs will not be played. To allow for the fastest possible changes, you should load the magazine successively beginning with compartment 1.1. Briefly press the j button.The CD/DVD changer menu is displayed.2. Select an empty magazine compartment. You are then prompted to insert a disc.3. Push the CD/DVD into the slot.The printed side of the CD/DVD must face upwards.The text "Disc" flashes on the button. As soon as the CD/DVD is detected, it is scanned and the current track is shown on the display.Loading all discs at PCM with emptyCD/DVD changerûPress the j button or any magazine compartment for several seconds.All magazine compartments are moved into position one after the other and at each stage you are prompted to insert a CD/DVD.Ejecting a disc at PCM with CD/DVD changer1. Select the desired magazine compartment.The CD/DVD is stopped if necessary and ejected. 2. Remove the CD/DVD.If you do not insert another CD/DVD in this magazine compartment, the CD/DVD in the next compartment is played.If you do not remove the CD/DVD from the slot, the PCM automatically pulls it back in after a short while.

36 DISCEjecting all discs at PCM with CD/DVD changerûPress the j button or any magazine compartment for several seconds.All discs are ejected one by one.The system automatically switches to the current audio source in TUNER mode as soon as you have removed the last CD/DVD from the magazine compartment.Calling up the main menu for CD/DVD modeûKeep pressing the n button until the "DISC" audio source is highlighted in the bottom line.Selecting a CD/DVD1. Keep pressing the n button until the "DISC" audio source is highlighted in the bottom line.2. Select "Disc selection".A list of the available CDs/DVDs is opened.3. Select the desired CD/DVD.Playback is started at the beginning of the disc.Selecting a trackYou can select a track directly using the track list. The track list shows the track numbers and, if available, the track names.1. Keep pressing the n button until the "DISC" audio source is highlighted in the bottom line.2. Select "Track list".3. Select the desired track.Selecting a track (MP3-CD/DVD)If the disc currently playing is an MP3-CD/DVD, the track list shows the names of the root directories as well as the subdirectories.The following icons are used in the track list to make it easier for you to navigate within the directory structure of the MP3-CD/DVD:–Subdirectory Selecting this list entry opens the corresponding subdirectory and displays the directories and tracks it contains.– Higher-level directory Selecting this list entry or pressing the h button displays the higher-level directory.– Playlist Selecting this list entry allows you to play lists of tracks you have created on your computer and burned to the CD/DVD.

DISC 371. Keep pressing the n button until the "DISC" audio source is highlighted in the bottom line.2. Select "Track list".3. Select the desired directory or playlist.4. Select the desired track.If the directory structure of the folders is very deep or the number of files is very large, it may not be possible to display of all the folders or tracks. File formats that cannot be played will not be displayed.To find out more, please also refer to the section "Notes on the media supported" on page 33.Selecting a chapter in Video-DVD modeWhen playing Video-DVDs, only playback of the audio information is supported.1. Keep pressing the n button until the "DISC" audio source is highlighted in the bottom line.2. Select "Track list".3. Select the desired chapter.- or if you want to select a chapter from another video title - 3. Select the first list entry with the "higher-level directory" icon.The list of video titles is opened.4. Select the desired video title.When playing Video-DVDs, only playback of the audio information is supported.5. Select the desired chapter.Setting the audio format for Video-DVD 1. Keep pressing the n button until the "DISC" audio source is highlighted in the bottom line.2. Press the i button or touch the tab of the same name in the header.3. Select "DVD audio format".A list of the available audio formats is opened.4. Select the desired audio format.After selecting a new audio format from the list, playback is resumed at the same point in the current chapter if possible. If this is not possible, the current chapter is played once again from the beginning.All following tracks are also played with the newly set audio format. If this is not possible with a track, playback reverts to the originally set audio format. This format is then retained for the subsequent tracks.

38 DISCSetting audio groups (DVD-Audio) 1. Keep pressing the n button until the "DISC" audio source is highlighted in the bottom line.2. Select "Track list".3. Select the first list entry with the "higher-level directory" icon.The list of audio groups is opened.4. Select the desired audio group.5. Select the desired title within the audio group.Skipping to the previous/next trackIf the current track has been playing for more than 10 seconds, pressing the p button resumes playback from the start of the current track. If the current track has not yet been playing for 10 seconds, playback is resumed from the start of the previous track.ûIf you wish to skip to the next track, briefly press the o button when a CD/DVD is playing.ûIf you wish to skip back to the start of the track, briefly press the p button when a CD/DVD is playing.Fast forward/reverseûPress the o or the p button for a few seconds when a CD/DVD is playing.Repeating a trackActivating this function repeats the current track or the current chapter (Video-DVD mode).ûSelect "Repeat" while a CD/DVD is playing to activate ( ) or deactivate ( ) the function.- or - ûPress the p or o button.Switching the shuffle function on and offWhen you activate this function, the current track is played to the end. Then the current CD is played in random order.ûSelect "Shuffle" while a CD/DVD is playing to activate ( ) or deactivate ( ) the function.Starting/stopping scanningIf you have activated this function, each track on the CD/DVD is played for approx. 10 seconds.1. Keep pressing the n button until the "DISC" audio source is highlighted in the bottom line. 2. Select "Start scan" to activate the function.3. Select "Stop scan" to deactivate the function.The track on the CD/DVD that has started playing continues to be played.The function is automatically stopped as soon as a track is selected directly in the track list.

DISC 39iPod* mobile digital deviceYou can connect one of the following iPod models to your PCM via a jack in the center console of your vehicle using the connecting cable supplied:– iPod 4th generation,– iPod 5th generation (video),– iPod nano,– iPod nano 2nd generation,–iPod mini, – iPod photo and– newer iPod-models**. *) iPod is a trademark of Apple Inc. and is registered in the USA and in other countries.**) The operation of newer iPod-models at PCM 3 can not be guaranteed.There is an arrow on the connector of the iPod cable to make it easier to position the connector correctly.It is recommended not to leave an iPod in the vehicle for long periods of time as extreme ambient conditions (temperature, humidity) can occur in vehicles.The iPod charges during use.Calling up the main menu for iPod modeûKeep pressing the n button until the "iPod" audio source is highlighted in the bottom line.The mode "iPod" is only displayed if there is a corresponding device connected to the interface.If this mode is to be permanently displayed (even if there is no device connected to the PCM), you must activate the interface in the SET menu.1. Press the n button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET DISC / AUX".You will only be able to access the "SET DISC / AUX" menu if there is at least one CD/DVD inserted or at least one audio source activated () in the menu..4. Select "iPod" to permanently activate ( ) or deactivate ( ) the display.iPod jack in sports car iPod jack in Cayenne

40 DISCSearching for tracks1. Keep pressing the n button until the "iPod" audio source is highlighted in the bottom line.2. Select "Find music" in iPod mode.If you only want to play certain tracks on your iPod, you can compile these tracks using specific filters. These filters can be used either individually or in succession for the search:–ArtistsDisplays a list of all available artists. If you select an artist from the list, the number of tracks available for the subsequent search is updated.–AlbumsDisplays a list of the available albums. If you have already selected an artist, only albums by this artist will be available for the subsequent search.If you select an album from the list, the number of tracks available for the subsequent search is updated.–TrackDisplays a list of all tracks stored on the iPod. If you have already set a filter (e.g. "Artists"), the list of tracks will have been automatically updated and only tracks by this artist will be available.–Music genresThe tracks stored on the iPod are generally assigned to a music genre (provided the "Genre" ID3 tag has been assigned). These music genres can also be used as filters for a search.Once you select a filter, higher-level filters are no longer available. After you select an artist, for example, the "Music genres" filter can no longer be selected.Selecting "Start playback" terminates the search and plays the tracks in accordance with your previous selection. Below is an example of how to perform a search for the tracks on a specific album:3. Select "Artists". A list of all the artists whose tracks are stored on the iPod is opened. 4. Select the desired artist in the list.5. Select "Albums".A list of all the albums by the selected artist stored on the iPod is opened.6. Select the desired album in the list.The number of tracks on this album is then shown in brackets on the "Track" button.7. Select "Start playback".The tracks on the selected album are played one after the other.The sorting grade of the lists is predetermined by the iPod.PlaylistsSelecting this list entry allows you to play lists of tracks you have stored on your iPod.1. Keep pressing the n button until the "iPod" audio source is highlighted in the bottom line.2. Select "Playlists".The menu is opened.3. Select the desired playlist.The tracks in the list are played one after the other. After the last track is played, the playlist is automatically repeated.

DISC 41Track listIf you have performed a music search or selected a playlist, the corresponding tracks are displayed in the track list.1. Keep pressing the n button until the "iPod" audio source is highlighted in the bottom line.2. Select "Track list".The menu is opened.3. Select the desired track.The track is played.To find out more about the track list, please refer to the section "Selecting a track (MP3-CD/DVD)" on page 36.The sorting grade of the lists is predetermined by the iPod.Skipping to the previous/next trackûIf you wish to skip to the next track, briefly press the o button when a CD/DVD is playing.ûIf you wish to skip back to the start of the track, briefly press the p button when a CD/DVD is playing.Fast forward/reverseûPress the o or the p button for a few seconds when a CD/DVD is playing.Repeating a trackIf you have activated this function, the current track will be repeated.ûSelect "Repeat" in iPod mode to activate ( ) or deactivate ( ) the function.- or - ûPress the p or o button.Switching the shuffle function on and offWhen you activate this function, the current track is played to the end. Then the tracks in the track list are played in random order.ûSelect "Shuffle" in iPod mode to activate ( ) or deactivate ( ) the function.The shuffle function is automatically switched off as soon as a new music search is started.

42 DISCUSBYou can connect a USB memory stick or a USB MP3 player containing audio files to the USB interface of the PCM in the center console.Using it you can:– play audio data from your USB stick (permitted formats: MP3, WMA, and AAC-LC),– download data from the Sport display, and– download data from the PCM logbook.You cannot connect USB devices that require the installation of special drivers. The use of a USB hub is not permitted.It is impossible to guarantee system compatibility with all memory sticks and MP3 players due to the rate of development of the USB media market.USB devices with increased power requirement (e.g. fixed disk) can possibly not be operated.It is recommended not to leave USB devices in the vehicle for long periods of time as extreme ambient conditions (temperature, humidity) can occur in vehicles. Notes on the media supportedTo avoid problems when playing your USB devices, please observe the following notes:– Permissible media:USB mass storage deviceUSB MP3 player (to MTP standard) – Permissible file systems:USB devices with the file systems FAT 16 and FAT 32 are supported.– Permissible USB standards:USB devices as per the USB 2.0 specifications are supported.– Permissible file structures:The maximum number of tracks per USB device is 10,000.A USB device may hold a maximum of 2,000 folders in total.Each folder in turn may contain a maximum of 1,000 tracks.The maximum directory depth is 11 levels.Up to 8 partitions are supported.USB interface in sports car USB interface in the Cayenne

DISC 43Calling up the main menu for USB modeûKeep pressing the n button until the "USB" audio source is highlighted in the bottom line.The mode "USB" is only displayed if there is a corresponding device connected to the interface.If this mode is to be permanently displayed (even if there is no device connected to the PCM), you must activate the interface in the SET menu.1. Press the n button.2. Press the i button or touch the tab of the same name in the header.You will only be able to access the "SET DISC / AUX" menu if there is at least one CD/DVD inserted or at least one audio source activated () in the menu.3. Select "SET DISC / AUX".4. Select "USB" to activate ( ) or deactivate ( ) the function.The first time USB mode is activated, the audio files in the USB memory are loaded. The menu cannot be used and the menu items are grayed out during this process. Once the first titles of the USB device are detected, the playback starts.Searching for tracks1. Keep pressing the n button until the "USB" audio source is highlighted in the bottom line.2. Select "Find music" in USB mode.If you only want to play certain tracks on your USB device, you can compile these tracks using specific filters:–ArtistsDisplays a list of all artists. If you select an artist from the list, the number of tracks available for the subsequent search is updated.–AlbumsDisplays a list of the available albums. If you have already set a filter (e.g. "Artists"), only albums by this artist will be available for the subsequent search.If you select an album from the list, the number of tracks available for the subsequent search is updated.–TrackDisplays a list of all tracks stored on the USB device. If you have already set a filter (e.g. "Artists"), the list of tracks will have been automatically updated and only tracks by this artist will be available.–Music genresThe tracks stored on the USB device are generally assigned to a music genre (provided the "Genre" ID3 tag has been assigned). These music genres can also be used as filters for a search.These filters can be used either individually or in succession for the search.In contrast to the music search in iPod mode, the filters can be set in any order.Selecting "Start playback" terminates the search and play the tracks in accordance with your previous selection.Below is an example of how to perform a search for the tracks on a specific album:3. Select "Artists". A list of all available artists whose tracks are stored on the USB device is opened. Highlight the desired artist by selecting them in the list.

44 DISC4. Select the desired artist in the list.5. Select "Albums".A list of all albums by the selected artist stored on the USB device is opened.6. Select the desired album in the list.The number of tracks on this album is then shown in brackets on the "Track" button.7. Select "Start playback".The tracks on the selected album are played one after the other.The music search in USB mode only works if the metadata for the tracks, the so-called ID3 tags, is available.A database is created in the PCM for the music search in USB mode. This can take a few minutes.The tracks from a music search are compiled as the first entry in the track list in a playlist named "Tracks from music search".Track listThe tracks and playlists stored on the USB device are displayed in alphabetical order in the track list.1. Keep pressing the n button until the "USB" audio source is highlighted in the bottom line.2. Select "Track list".The menu is opened.3. Select the desired track.The track is played.- or - Select the playlist and then the desired track.The track is played.Skipping to the previous/next trackIf the current track has been playing for more than 10 seconds, pressing the p button resumes playback from the start of the current track. If the current track has not yet been playing for 10 seconds, playback is resumed from the start of the previous track.ûIf you wish to skip to the next track, briefly press the o button when a CD/DVD is playing.ûIf you wish to skip back to the start of the track, briefly press the p button when a CD/DVD is playing.Fast forward/reverseûPress the o or the p button for a few seconds when a CD/DVD is playing.Repeating a trackActivating this function repeats the current track.ûSelect "Repeat" in USB mode to activate ( ) or deactivate ( ) the function.- or - ûPress the p or o button.Switching the shuffle function on and offIf you have activated this function, the current track is played to the end. Then all tracks are played in random order.ûSelect "Shuffle" in USB mode to activate ( ) or deactivate ( ) the function.The shuffle function is automatically switched off as soon as a new music search is started.

DISC 45Starting/stopping scanningIf you have activated this function, each track on the USB device is played for approx. 10 seconds.1. Keep pressing the n button until the "USB" audio source is highlighted in the bottom line.2. Select "Start scan" to activate the function.3. Select "Stop scan" to deactivate the function.The track on the USB device that has started playing continues to be played.The function is automatically stopped as soon as a track is selected directly in the track list.

46 DISCExternal audio sourceYou can connect an external audio source that is operated on the source itself rather than on the PCM to the AUX interface of the PCM.Calling up the main menu for the external sourceûKeep pressing the n button until the "AUX" audio source is highlighted in the bottom line.In order that a connected external audio source can be selected by the n button, the interface in the SET menu must be activated.1. Press the n button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET DISC / AUX".You will only be able to access the "SET DISC / AUX" menu if there is at least one CD/DVD inserted or at least one audio source activated () in the menu..4. Select "AUX" to activate ( ) or deactivate ( ) the function.The external audio source cannot be operated on the PCM, it can only be operated on the device itself. Please consult the operating instructions for the respective device to find out how to do this.Volume control should mainly be performed on the external audio source to avoid large differences in volume (particularly increases) when changing the audio source.Recommendation:ûSet the maximum volume on the external audio source.ûThen set the desired volume on the PCM.WARNING!Accident hazard. The distraction could result in you losing control of the vehicle.ûOperate the external audio source only if you are safely in control of your vehicle and when the traffic conditions permit. If in doubt, stop the car and operate the PCM while the vehicle is parked.

PHONE 47PHONEBluetooth®.................................................. 49Prerequisites for the cell phone ...................50Hands-free quality.......................................50Interruptions to the connection while driving............................................... 50Switching Bluetooth on and off ....................51Operating the Bluetooth hands-free unit(Bluetooth Mobile phone preparation)............. 52Authorizing a cell phone ..............................52Having a conversation.................................53Temporarily muting the telephone microphone ................................53Accepting a call..........................................53Ending a call ..............................................54Rejecting a call...........................................55Dialing a number ........................................55Using the quick dial (redial) function .............55Using the direct dial function .......................55Phonebook ................................................56List of previous calls...................................56List of received calls...................................57Sending DTMF tones...................................58Establishing an additional call ......................58Call waiting ................................................59Call waiting (swapping) and conference ........59Ringtone settings (Bluetooth Mobile phone preparation)............. 60Setting the ringtone type.............................60Setting the ringtone volume.........................60Bluetooth settings (Bluetooth Mobile phone preparation)............. 61Authorized Bluetooth devices.......................61Adding a new Bluetooth device ....................61Establishing a connection from the external Bluetooth device ............................62Phonebook settings(Bluetooth Mobile phone preparation)............. 63Setting the memory for the phonebook ........63Setting automatic transfer of the phonebook.................................................63Transferring the phonebook ........................63Manually transferring the phonebook entries......................................63

48 PHONEOperating the PCM telephone..................... 64Inserting the SIM card in the PCM ................64Entering the PIN ......................................... 65Having a conversation ................................ 65Temporarily muting the telephone microphone ................................65Accepting a call ......................................... 66Ending a call .............................................. 66Rejecting a call...........................................67Dialing a number ........................................ 67Using the quick dial (redial) function .............67Using the direct dial function ....................... 67PCM phonebook......................................... 68List of previous calls................................... 69List of received calls...................................70Sending DTMF tones .................................. 71Establishing an additional call ...................... 72Call waiting ................................................72Call waiting (swapping) and conference ........73Making an emergency call...........................73Text messages (SMS)(with PCM telephone only)............................. 74Reading a text message .............................74Replying to a text message......................... 74Creating and sending a new text message............................................. 76Forwarding a text message......................... 77Deleting a text message ............................. 77Reading a vCard......................................... 78Saving a vCard...........................................78Discarding a vCard .....................................78Numbers in text messages..........................78Displaying the complete text .......................79Creating a template ....................................79Cordless handset(with PCM telephone only)............................. 80Switching the cordless handset on and off ..................................................80Charging the cordless handset ....................80General operation.......................................80Accepting a call..........................................81Ending a call ..............................................81Rejecting a call...........................................81Dialing a number ........................................81Temporarily muting the cordless handset microphone......................81Making a further call ...................................81Call waiting (swapping) and conference ........82Phonebook.................................................83Text messages (SMS) .................................85Settings.....................................................87Telephone settings (PCM telephone) .......................................... 88Switching the PCM telephone on and off.......88Setting ringtones........................................88Selecting a network ....................................88Displaying the IMEI .....................................89Call settings (PCM telephone)........................................... 89Setting call forwarding ................................89Switching the "Call waiting" function on and off ..................................................90Switching the "Redial" function on and off......91Setting transfer of your own number ............91Setting automatic call answering..................91Bluetooth settings (PCM telephone)........................................... 92Authorized Bluetooth devices.......................92Adding a new Bluetooth device ....................93Finding the cordless handset .......................93SIM settings (PCM telephone)........................................... 94Making settings for PIN entry.......................94Settings for messages and data (PCM telephone)........................................... 95SMS settings..............................................95Phonebook settings ....................................95Transferring the phonebook.........................96

PHONE 51Switching Bluetooth on and offSwitching Bluetooth on1. Press the c button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PHONE" >"Bluetooth settings". 4. Select "Switch on Bluetooth".Switching Bluetooth off 1. Press the c button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PHONE". > Select "Bluetooth settings". 4. Select "Switch off Bluetooth".

54 PHONE- or - (with multi-function steering wheel with telephone function) ûPress the Answer button on the multi-function steering wheel.- or - (with handset) ûPress the Answer button on the handset.- or - ûRemove the handset from the charging cradle.Ending a callYou can end an active call by:û Pressing the End call button k on the PCM.- or - ûSelecting "End call" in the call menu.- or - ûPressing the Retract button on the external cell phone. - or - (with multi-function steering wheel with telephone function) ûPressing the End call button on the multi-function steering wheel.- or - (with handset) ûPressing the End call button on the handset. - or - ûPlacing the receiver in the charging cradle (if the call is on the receiver).

PHONE 55Rejecting a callYou can reject an incoming call by:û Pressing the End call button k on the PCM.- or - ûSelecting "Reject" in the call menu.- or - ûBriefly pressing the left rotary knob u.- or - ûPressing the End call button on the external cell phone. - or - (with multi-function steering wheel with telephone function) ûPressing the End call button on the multi-function steering wheel.- or - (with handset) ûPressing the Reject button on the handset. Dialing a number1. Press the c button. The PHONE main menu appears.2. Select "Dial number".The input menu for telephone numbers is opened. The input field for the telephone number is blank.3. Select the individual digits in the telephone number one after the other. 4. Select "Call number".The telephone call is established and the call menu is displayed.Always enter the telephone number with the dialing code.Using the quick dial (redial) function You open the quick dial menu by pressing the Lift receiver button l on the PCM. This menu contains a list of the last numbers dialed. 1. Press the Lift receiver button l on the PCM.2. Select the person you wish to talk to.3. Select "Call number" or press the Lift receiver button l on the PCM again.- or - Select the first list entry "Dial number".The input menu for telephone numbers opens.4. Enter the desired telephone number.5. Select "Call number".Using the direct dial function If a telephone number is displayed in a menu and you press the Lift receiver button l on the PCM, this number is dialed directly.

56 PHONEPhonebookDisplaying the phonebook1. Press the c button. The PHONE main menu appears.2. Select "Phonebook".The phonebook is opened. Calling a phonebook entry1. Press the c button. 2. Select "Phonebook".3. Select the desired phonebook entry.4. If there is more than one number stored for this entry, select the desired number.5. Select "Call number".The desired number is dialed.Sending a vCardYou can send phonebook entries directly as vCards. A vCard is an "electronic visiting card" that a recipient can accept directly into their phonebook.1. Press the c button. 2. Select "Phonebook".3. Select the desired phonebook entry.4. Select "Send vCard".5. The list of known devices that are suitable for a transfer is displayed. If the desired device is not there, you can search for further devices. To do this, press "New device" (see also the section "Adding a new Bluetooth device" on page 93). As soon as the search is complete, a list containing the devices found is displayed. Once you have selected a device in this list, a connection is established and the vCard is sent.List of previous callsThe Previous calls telephone function automatically stores the numbers of the last 25 calls you made. The PCM can distinguish 5 different cell phones in connection with this. If a cell phone known to the PCM is connected, the last telephone numbers dialed with the PCM are displayed for this device.If one of the telephone numbers matches an entry from your phonebook, the name of the person called is displayed instead of the telephone number. Displaying the list1. Press the c button. 2. Select "Previous calls".The list of previous calls is displayed with the time and date of the calls.Calling a number from the list of previous calls1. Press the c button. 2. Select "Previous calls".3. Select the desired number.4. Select "Call number".Storing a number from the list of previous calls in the phonebookThis function is only available when there is a SIM card inserted.1. Press the c button. 2. Select "Previous calls".3. Select the desired number.4. Select "Store number".The phonebook is opened.5. Enter the name corresponding to the number and store the entry.To find out more, please refer to the section "PCM phonebook" on page 68.

PHONE 57Deleting a number from the list of previous calls1. Press the c button. 2. Select "Previous calls".3. Select the desired number.4. Select "Delete".5. Confirm the message that appears by selecting "Yes".The number is deleted from the list.Sending a message to a number from the list of previous calls1. Press the c button. 2. Select "Previous calls".3. Select the desired number.4. Select "Send message".The SMS input menu is opened. The number previously chosen is already entered as the recipient.5. Enter the desired message and send.To find out more, please refer to the section "Replying to a text message" on page 74.Adding to a number from the list of previous calls1. Press the c button. 2. Select "Previous calls".3. Select the desired number.4. Select "Add to number".The input menu is opened and the number is shown in the input field ready for editing.5. Make the desired change.6. Select "Call number".The telephone number stored in the list is not changed.List of received callsThe "Received calls" telephone function automatically stores the numbers of the last 25 calls you received. If one of the telephone numbers matches an entry from your phonebook, the name of the caller is displayed instead of the telephone number. Displaying the list 1. Press the c button. 2. Select "Received calls".The list of received calls is displayed with the time and date of the calls. It contains both accepted and rejected calls.Calling a number from the list of received calls 1. Press the c button. 2. Select "Received calls".3. Select the desired number.4. Select "Call number".Storing a number from the list of received calls in the phonebook This function is only available when there is a SIM card inserted.1. Press the c button. 2. Select "Received calls".3. Select the desired number.4. Select "Store number".The phonebook is opened.5. Enter the desired details.To find out more, please refer to the section "PCM phonebook" on page 68.Deleting a number from the list of received calls 1. Press the c button. 2. Select "Received calls".3. Select the desired number.4. Select "Delete".5. Confirm the message that appears by selecting "Yes".The number is deleted from the list.

58 PHONESending a message to a number from the list of received calls 1. Press the c button. 2. Select "Received calls".3. Select the desired number.4. Select "Send message".The SMS input menu is opened. The number previously chosen is already entered as the recipient.5. Enter the desired message and send.To find out more, please refer to the section "Replying to a text message" on page 74.Adding to a number from the list of received calls 1. Press the c button. 2. Select "Received calls".3. Select the desired number.4. Select "Add to number".The input menu is opened and the number is shown in the input field ready for editing.5. Make the desired change.6. Select "Call number".The telephone number stored in the list is not changed.Sending DTMF tones DTMF tones (Dual Tone Multi Frequency) can be sent once a telephone connection has been established. You need this function to communicate with touch tone-activated telephone systems (e.g. for controlling your voice mailbox or when dialing in remotely to your answering machine).1. Select "Enter number" in the call menu.The numerical input menu is opened.2. Enter the desired digits.Each digit is immediately transmitted as a DTMF tone.Establishing an additional callYou can establish a further call while there is another call active.Some cell phones do not support making or accepting a second call. If this is the case, the "New call" menu item is grayed out while there is a call active.1. Select "New call" in the call menu.2. You then have the following options for entering the telephone number:–"Dial number":The input menu for telephone numbers is opened. To find out more, please refer to the section "Dialing a number" on page 55.–"Phonebook":You can insert a number stored in the phonebook. To find out more, please refer to the section "Calling a phonebook entry" on page 56.The active call is retained if the second connection is established. You can switch between the two calls or hold a conference call. To find out more about this, please refer to the section "Call waiting (swapping) and conference" on page 59.

PHONE 59Call waitingThe "Call waiting" function is only available if supported by the network provider.The "Call waiting" function must also be activated in the call settings of the PCM or the cell phone. To find out more, please refer to the section "Call waiting (swapping) and conference" on page 59.Rejecting a waiting callIf you receive another call while there is already one active, you will hear a call waiting tone.The menu for the incoming call is displayed and a message appears in the bottom line.ûSelect "Reject".The waiting call is rejected. The caller hears the busy signal. If the caller's telephone number is transmitted, the number or name appears in the "Received calls" list. Accepting a waiting callûSelect "Answer".The waiting call is accepted and activated. The previously active call is put on hold.You then have the option to switch between the two calls or to hold a conference with both callers. To find out more, please refer to the section "Call waiting (swapping) and conference" on page 59.The PCM will not accept a third incoming call.The caller hears the busy signal or is redirected to the mailbox.Ending an active call1. Select "End active call".The currently active call is ended and the first call that is on hold is activated again.Call waiting (swapping) and conferenceThe "Call waiting & conf." function is only available if supported by the network provider. When using the Bluetooth hands-free unit, this function is only available for a limited selection of devices.A prerequisite for this function is that there are two calls, one of which is active and one of which is on hold (inactive). To find out more about this, please refer to the sections "Establishing an additional call" on page 58 and "Accepting a waiting call" on page 59.ûSelect "Call waiting & conf.".You now have a number of options:

60 PHONESwapping between the calls (call waiting)1. Select "Swap".The system swaps to the other call. The previously active call is put on hold.2. Select "Swap" again to return to the call on hold.3. To end one of the two calls, select "End call 1" or "End call 2".- or - Select "End all" to end both calls.Conferencing the two calls1. Select "Conference".Both calls are activated and connected so that all parties can speak to each other.2. Select "End all" to end the conference.Ringtone settings (Bluetooth Mobile phone preparation)Setting the ringtone type1. Press the c button.2. Press the i button or touch the tab of the same name in the header.3. Select "Ringtone settings" > "Ringtone type".A list of the available ringtones is displayed.4. Set the desired ringtone by selecting it.The set ringtone type is played again.5. If necessary turn the left rotary knob t to change the the ringtone volume.The so set ringtone value is assumed by dropping out of the menu.If the connected cell phone supports the transfer of the ringtone via Bluetooth (inband ringing), the Ringtone settings item is grayed out and the ringtone must be set on the cell phone.Setting the ringtone volume1. Press the c button.2. Press the i button or touch the tab of the same name in the header.3. Select "Ringtone settings"> "Ringtone volume".4. Make the desired setting by turning the right rotary knob q or by selecting the two symbols and .

62 PHONE1. Press the c button.2. Press the i button or touch the tab of the same name in the header.> Select "Bluetooth settings".> "New device".A search is started and a list of the telephones found is displayed.3. Choose the desired device by selecting it in the list.A Bluetooth code is displayed that you must enter in the corresponding Bluetooth device.Once you have entered the code, successful authorization of the device is shown on the display.4. The connection is automatically established by the PCM.With some cell phones, the connection request by the PCM must be explicitly confirmed on the cell phone. This may even have to be done a number of times in some cases, for example before transferring the phonebook. To avoid this request, you can authorize the PCM in your cell phone's list of devices. The connection will then be established automatically and without the need for further checks in future.It can take a few seconds for the Bluetooth device to be authorized.>>>If the list of authorized Bluetooth devices is full (max. 5 cell phones), you must first delete a device from the list. An appropriate message will be displayed. To find out more, please refer to the section "Deleting an authorized Bluetooth device from the list" on page 61.Establishing a connection from the external Bluetooth deviceIf the PCM does not find your cell phone or a connection attempt by the PCM fails, you can also start the authorization from the cell phone.1. If another cell phone is connected to the PCM, switch off Bluetooth on the connected cell phone to disconnect the connection with the PCM.2. Press the c button.3. Press the i button or touch the tab of the same name in the header.4. Using the cell phone, search for audio accessories or devices that support Bluetooth. Refer to the manufacturer's operating instructions to find out how to do this.5. Select the device „PCM“ in the search list of the cell phone and establish the connection.Refer to the manufacturer's operating instructions to find out how to do this.6. A request appears on the PCM display. Select "Accept".7. Enter any 4-digit code in the appearing keypad and confirm it with OK.8. Enter the same Bluetooth code in your cell phone.Once you have entered the code, successful authorization of the device is shown on the display.9. With many cell phones, the connection with the PCM must be explicitly established from the cell phone following authorization. Further details can be found in the operating manual for your cell phone.With some cell phones, the Bluetooth code must be directly provided by the cell phone during the connection request. If this is the case, enter any 4-digit code in your cell phone and confirm it with OK. You will then be shown a keypad on the PCM display where you must enter the same code and confirm it.

PHONE 63Phonebook settings(Bluetooth Mobile phone preparation)Setting the memory for the phonebookYou can set which phonebook entries should be used for the display in the phonebook:– the phonebook entries on the SIM cardor/and – the phonebook entries in the telephone's memory.This allows you to adapt the phonebook list of the PCM to your list in the cell phone.1. Press the c button. 2. Press the i button or touch the tab of the same name in the header.3. Select "Phonebook settings" > "Phonebook memory".4. Make the desired setting by selecting.Setting automatic transfer of the phonebookIf the "Auto update" function is switched on, a cell phone's phonebook will be transferred each time the PCM is connected to the cell phone. The phonebook stored in the PCM is replaced by the current phonebook from the cell phone once transfer is complete. If the "Auto update" function is switched off, the data will no longer be updated.1. Press the c button. 2. Press the i button or touch the tab of the same name in the header.3. Select "Phonebook settings".4. Select "Auto update" to activate ( ) or deactivate ( ) the function.Transferring the phonebookThis setting transfers the phonebook of the connected cell phone once more into the PCM. The phonebook stored in the PCM is replaced by the current phonebook from the cell phone once transfer is complete.1. Press the c button. 2. Press the i button or touch the tab of the same name in the header.3. Select "Transfer phonebook".Manually transferring the phonebook entriesSome cell phones do not support automatic transfer of the phonebook If this is the case, you can manually load entries from the phonebook on your cell phone phonebook into the phonebook of the PCM.1. Press the c button. 2. Press the i button or touch the tab of the same name in the header.3. Select "Transfer phonebook".4. You can now choose whether you wish to add to or completely replace the phonebook.Select the desired function. 5. Select the desired entries on your cell phone and transfer to the PCM via Bluetooth. The PCM counts the entries already transferred.6. Once transfer is complete, select "Ready".You can then access the transferred entries in the PCM phonebook.

PHONE 65Entering the PINAs soon as you have switched on the telephone and inserted the SIM card, you are prompted to enter the PIN (PIN = Personal Identification Number).You will find the PIN in the documentation you received from your network provider.1. Enter the PIN by selecting the keys on the keypad shown.The digits entered are displayed in the input field as asterisks. 2. Confirm your entry by selecting "OK".If you enter the wrong PIN three times in a row, the SIM card will be blocked. To unblock the card you must enter the so-called PUK (Pin Unblocking Key). Follow the instructions on the PCM display for this.If you enter the wrong PUK ten times in a row, the SIM card will be blocked. This block can only be removed by the network provider.You can deactivate the PIN prompt after the device is switched. To find out more, please refer to the section "Switching the PIN prompt on and off" on page 94 as well as „"Using a stored PIN" on page 94“.Having a conversationThere is a hands-free microphone in the steering column trim panel (sports car) or in the roof control console (Cayenne) of the vehicle. This means that you can conduct all telephone calls without using a handset.You control the volume using the left rotary knob t.The microphone is directed towards the driver to optimize the hands-free quality.Conducting a call using the headset 1. Select "Hands-free" in the call menu to switch to hands-free mode.2. Select "Headset" in the call menu to terminate hands-free mode. The call is transferred back to the headset.The call can only be conducted using the headset if this has previously been connected to the PCM via Bluetooth®.To find out more, please refer to the sections "Authorized Bluetooth devices" on page 92 and "Adding a new Bluetooth device" on page 93.Conducting a call using the cordless handset1. Select "Hands-free" in the call menu to switch to hands-free mode.2. Press the Lift receiver button on the cordless handset to terminate hands-free mode. The call is transferred back to the cordless handset. To find out more, please also refer to the section "Cordless handset (with PCM telephone only)" on page 80.Temporarily muting the telephone microphoneûDuring the call, select "Mute microphone" to switch the function on ( ) and off ( ).

66 PHONEAccepting a call As soon as a call comes in, an appropriate menu is temporarily displayed or an appropriate message shown in the bottom line.The telephone number and the name of the caller are displayed if available.You can accept the incoming call in a number of ways:û Press the Lift receiver button l on the PCM.- or - ûSelect "Answer" on the display.- or - (with multi-function steering wheel with telephone function) ûPress the Answer button on the multi-function steering wheel.- or - (with handset) ûPress the Answer button on the handset.- or - ûRemove the handset from the charging cradle.Ending a callYou can end an active call by:û Pressing the End call button k on the PCM.- or - ûSelecting "End call" in the call menu.- or - (with multi-function steering wheel with telephone function) ûPressing the End call button on the multi-function steering wheel.- or - (with handset) ûPressing the End call button on the handset. - or - ûPlacing the receiver in the charging cradle (if the call is on the receiver).

PHONE 67Rejecting a callYou can reject an incoming call by:û Pressing the End call button k on the PCM.- or - ûSelecting "Reject" in the call menu.- or - ûBriefly pressing the left rotary knob u.- or - (with multi-function steering wheel with telephone function) ûPressing the End call button on the multi-function steering wheel.- or - (with handset) ûPressing the Reject button on the handset. Dialing a number1. Press the c button. The PHONE main menu appears.2. Select "Dial number".The input menu for telephone numbers is opened. The input field for the telephone number is blank.3. Select the individual digits in the telephone number one after the other. 4. Select "Call number".The telephone call is established and the call menu is displayed.Always enter the telephone number with the dialing code.Using the quick dial (redial) functionYou open the quick dial menu by pressing the Lift receiver button l on the PCM. This menu contains a list of the last numbers dialed. 1. Press the Lift receiver button l on the PCM.2. Select the person you wish to talk to.3. Select "Call number" or press the Lift receiver button l on the PCM again.- or - Select the first list entry "Dial number".The input menu for telephone numbers opens.4. Enter the desired telephone number.5. Select "Call number".Using the direct dial functionIf a telephone number is displayed in a menu and you press the Lift receiver button l on the PCM, this number is dialed directly.

68 PHONEPCM phonebookDisplaying the phonebook1. Press the c button. The PHONE main menu appears.2. Select "Phonebook".The phonebook is opened. If no entries have been stored in it yet, the message "List empty" is displayed.If entries have already been stored, these are shown in a list.Calling a phonebook entry1. Press the c button. 2. Select "Phonebook".3. Select the desired phonebook entry.4. If there is more than one number stored for this entry, Select the desired number.5. Select "Call number".The desired number is dialed.Creating and storing a phonebook entry(only with the SIM card inserted) 1. Press the c button. 2. Select "Phonebook". 3. Select "New entry" at the end of the list.4. Select "Name".The input menu is opened.5. Enter the desired name by selecting the individual letters in the input menu and confirm your entry by pressing "OK". 6. Select "Number".7. Enter the desired number by selecting the individual digits in the input menu and confirm your entry by pressing "OK".8. Select "Store entry".The entry is stored on the SIM card.The telephone number must be entered with dialing code (there are a few exceptions to this). For overseas telephone calls you must also specify the international dialing code.Example: For Germany, you must enter +4917XXX instead of 017XXX if you will be dialing the number from outside the country.Editing a phonebook entry(only with the SIM card inserted) 1. Press the c button. 2. Select "Phonebook".3. Select the desired phonebook entry.4. Select "Edit".5. Select the menu item to be edited and make the desired change in the respective input menu.6. Confirm your entry by selecting "OK".7. Select "Store entry".The entry is stored on the SIM card.Deleting a phonebook entry(only with the SIM card inserted) 1. Press the c button. 2. Select "Phonebook".3. Select the desired phonebook entry.4. Select "Delete".A message asking you whether or not the entry selected should actually be deleted is displayed.5. Approve the message by selecting "Yes".The phonebook entry is deleted.

PHONE 69Deleting the contents of the SIM card(only with the SIM card inserted) 1. Press the c button. 2. Select "Phonebook".3. Select any phonebook entry.4. Select "Delete".5. Select "Delete SIM card".6. Confirm the message that appears with "Delete all".Sending a vCardYou can send phonebook entries directly as vCards. A vCard is an "electronic visiting card" that a recipient can accept directly into their phonebook.1. Press the c button. 2. Select "Phonebook".3. Select the desired phonebook entry.4. Select "Send vCard".5. Select one of the two following transmission methods:–"via SMS"–"via Bluetooth"6. If you choose "via SMS", you must enter the telephone number of the recipient in the input menu that appears.You can also select the number from the phonebook by selecting the corresponding menu item. To find out more, please refer to the section "Creating and sending a new text message" on page 76.If you choose "via Bluetooth", the list of known devices that are suitable for a transfer is displayed. If the desired device is not there, you can search for further devices. To do this, press "New device" (see also the section "Adding a new Bluetooth device" on page 93). As soon as the search is complete, a list containing the devices found is displayed. Once you have selected a device in this list, a connection is established and the vCard is sent.You can also send a destination entry from the personal destination memory of your navigation system as a vCard. To find out more about this, please refer to the section "Sending a destination" on page 130.List of previous callsThe Previous calls telephone function automatically stores the numbers of the last 25 calls you made. The PCM can distinguish 5 different cell phones in connection with this. If a cell phone known to the PCM is connected, the last telephone numbers dialed with the PCM are displayed for this device.If one of the telephone numbers matches an entry from your phonebook, the name of the person called is displayed instead of the telephone number. Displaying the list1. Press the c button. 2. Select "Previous calls".The list of previous calls is displayed with the time and date of the calls.Calling a number from the list of previous calls1. Press the c button. 2. Select "Previous calls".3. Select the desired number.4. Select "Call number".

70 PHONEStoring a number from the list of previous calls in the phonebookThis function is only available when there is a SIM card inserted.1. Press the c button. 2. Select "Previous calls".3. Select the desired number.4. Select "Store number".The phonebook is opened.5. Enter the name corresponding to the number and store the entry.To find out more, please refer to the section "PCM phonebook" on page 68.Deleting a number from the list of previous calls1. Press the c button. 2. Select "Previous calls".3. Select the desired number.4. Select "Delete".5. Confirm the message that appears by selecting "Yes".The number is deleted from the list.Sending a message to a number from the list of previous calls1. Press the c button. 2. Select "Previous calls".3. Select the desired number.4. Select "Send message".The SMS input menu is opened. The number previously chosen is already entered as the recipient.5. Enter the desired message and send.To find out more, please refer to the section "Replying to a text message" on page 74.Adding to a number from the list of previous calls1. Press the c button. 2. Select "Previous calls".3. Select the desired number.4. Select "Add to number".The input menu is opened and the number is shown in the input field ready for editing.5. Make the desired change.6. Select "Call number".The telephone number stored in the list is not changed.List of received callsThe "Received calls" telephone function automatically stores the numbers of the last 25 calls you received. If one of the telephone numbers matches an entry from your phonebook, the name of the caller is displayed instead of the telephone number. Displaying the list 1. Press the c button. 2. Select "Received calls".The list of received calls is displayed with the time and date of the calls. It contains both accepted and rejected calls.Calling a number from the list of received calls 1. Press the c button. 2. Select "Received calls".3. Select the desired number.4. Select "Call number".

PHONE 71Storing a number from the list of received calls in the phonebook This function is only available when there is a SIM card inserted.1. Press the c button. 2. Select "Received calls".3. Select the desired number.4. Select "Store number".The phonebook is opened.5. Enter the desired details.To find out more, please refer to the section "PCM phonebook" on page 68.Deleting a number from the list of received calls 1. Press the c button. 2. Select "Received calls".3. Select the desired number.4. Select "Delete".5. Confirm the message that appears by selecting "Yes".The number is deleted from the list.Sending a message to a number from the list of received calls 1. Press the c button. 2. Select "Received calls".3. Select the desired number.4. Select "Send message".The SMS input menu is opened. The number previously chosen is already entered as the recipient.5. Enter the desired message and send.To find out more, please refer to the section "Replying to a text message" on page 74.Adding to a number from the list of received calls 1. Press the c button. 2. Select "Received calls".3. Select the desired number.4. Select "Add to number".The input menu is opened and the number is shown in the input field ready for editing.5. Make the desired change.6. Select "Call number".The telephone number stored in the list is not changed.Sending DTMF tones DTMF tones (Dual Tone Multi Frequency) can be sent once a telephone connection has been established. You need this function to communicate with touch tone-activated telephone systems (e.g. for controlling your voice mailbox or when dialing in remotely to your answering machine).1. Select "Enter number" in the call menu.The numerical input menu is opened.2. Enter the desired digits.Each digit is immediately transmitted as a DTMF tone.

72 PHONEEstablishing an additional callYou can establish a further call while there is another call active.Some cell phones do not support making or accepting a second call. If this is the case, the "New call" menu item is grayed out while there is a call active.1. Select "New call" in the call menu.2. You then have the following options for entering the telephone number:–"Dial number":The input menu for telephone numbers is opened. To find out more, please refer to the section "Dialing a number" on page 55.–"Phonebook":You can insert a number stored in the phonebook. To find out more, please refer to the section "Calling a phonebook entry" on page 56.The active call is retained if the second connection is established. You can switch between the two calls or hold a conference call. To find out more about this, please refer to the section "Call waiting (swapping) and conference" on page 59.Call waitingThe "Call waiting" function is only available if supported by the network provider.The "Call waiting" function must also be activated in the call settings of the PCM or the cell phone. To find out more, please refer to the section "Call waiting (swapping) and conference" on page 59.Rejecting a waiting callIf you receive another call while there is already one active, you will hear a call waiting tone.The menu for the incoming call is displayed and a message appears in the bottom line.ûSelect "Reject".The waiting call is rejected. The caller hears the busy signal. If the caller's telephone number is transmitted, the number or name appears in the "Received calls" list. Accepting a waiting callûSelect "Answer".The waiting call is accepted and activated. The previously active call is put on hold.You then have the option to switch between the two calls or to hold a conference with both callers. To find out more, please refer to the section "Call waiting (swapping) and conference" on page 59.The PCM will not accept a third incoming call.The caller hears the busy signal or is redirected to the mailbox.Ending an active call1. Select "End active call".The currently active call is ended and the first call that is on hold is activated again.

PHONE 73Call waiting (swapping) and conferenceThe "Call waiting & conf." function is only available if supported by the network provider. When using the Bluetooth® hands-free unit, this function is only available for a limited selection of devices.A prerequisite for this function is that there are two calls, one of which is active and one of which is on hold (inactive). To find out more about this, please refer to the sections "Establishing an additional call" on page 58 and "Accepting a waiting call" on page 59.ûSelect "Call waiting & conf.".You now have a number of options:Swapping between the calls (call waiting)1. Select "Swap".The system swaps to the other call. The previously active call is put on hold.2. Select "Swap" again to return to the call on hold.3. To end one of the two calls, select "End call 1" or "End call 2".- or - Select "End all" to end both calls.Conferencing the two calls1. Select "Conference".Both calls are activated and connected so that all parties can speak to each other.2. Select "End all" to end the conference.Making an emergency call1. Press the c button. 2. Select "i". 3. Select "Emergency call".4. Select one of the two menu items in the emergency call menu that appears:–YesIf you select "Yes", a connection is established to the rescue coordination center. –NoIf you select "No", no emergency call is made. Instead the previous menu is opened again.An emergency call can also be made:– during an active call,– without having to enter a PIN,– while the SIM card is being checked as well as– without a valid SIM card (depending on the country and network).If your vehicle is equipped with a navigation system, you can access the current location information in the event of an emergency call. For that purpose select „Location info“.

74 PHONEText messages (SMS)(with PCM telephone only)You can create and receive text messages (SMS) with the Messages function.1. Press the c button. 2. Select "Messages".The list of received text messages is opened.Small icons show the status or type of the text messages:as yet unread text message,read text message,vCard.vCards can be sent by other devices to the PCM via Bluetooth or SMS.When a new text message arrives, a closed envelope icon is displayed in the bottom line regardless of the menu selected. If a flashing envelope icon is displayed in the bottom line, it means there is no more memory space available on the SIM card for text messages. To be able to receive further text messages, one or more saved messages must first be deleted. To find out more, please refer to the section "Deleting a text message" on page 77.The arrival of a text message can also be indicated by an audible signal.To find out more, please refer to the section "Switching the SMS signal tone on and off" on page 95.Reading a text message 1. Press the c button. 2. Select "Messages". 3. Open the relevant text message by selecting it.Replying to a text messageYou have the following options:–"New text": The input menu is opened and new text can be entered.–"Attach reply": The input menu is opened and the original text of the message is shown in the text field. You can edit or add to the text as required.–"Reply with YES": The input menu is opened and the original text of the message is shown in the text field. The reply "YES" is appended to the end of the text.You can edit or add to the text as required.–"Reply with NO": The input menu is opened and the original text of the message is shown in the text field. The reply "NO" is appended to the end of the text.You can edit or add to the text as required.–"Templates": A list of the message templates is opened and a template can be accepted or edited by selecting it.

PHONE 75Creating a reply with new text1. Press the c button. 2. Select "Messages".3. Select the desired text message to reply to.4. Select „Reply“.5. Select "New text".The input menu is opened.6. Enter the desired text using the input menu.7. Confirm your entry by selecting "OK".The text input menu is closed and the input menu for the telephone number is opened. The number of the sender of the text message is already entered in the text field.8. Select "Send" to send the message.Creating a text message with attached reply1. Press the c button. 2. Select "Messages".3. Select the desired text message to reply to.4. Select „Reply“.5. Select "Attach reply".The input menu is opened. The reply is appended to the text received.6. Edit the text as required using the input menu and confirm by selecting "OK".The text input menu is closed and the input menu for the telephone number is opened. The number of the sender of the text message is already entered in the text field.7. Select "Send" to send the message.Replying to a text message with Yes or No1. Press the c button. 2. Select "Messages".3. Select the desired text message to reply to.4. Select „Reply“.5. Select "Reply with YES" or "Reply with NO".The input menu is opened. 6. Edit the text as required using the input menu and confirm by selecting "OK".The text input menu is closed and the input menu for the telephone number is opened. The number of the sender of the text message is already entered in the text field.7. Select "Send" to send the message.Replying to a text message using a text template1. Press the c button. 2. Select "Messages".3. Select the text message you wish to reply to.4. Select „Reply“.5. Select "Templates".6. Select the desired template in the displayed list.7. Select "Edit template" if applicable and make the desired changes in the text. Otherwise select "Use template" and add any additional information required.8. Confirm your entry by selecting "OK".The text input menu is closed and the input menu for the telephone number is opened. The number of the sender of the text message is already entered in the text field.If your vehicle is equipped with a navigation system, some of the templates will be automatically completed when they are selected. These are templates containing navigation data such as the time of arrival or the destination, for example.9. Select "Send" to send the message.

76 PHONECreating and sending a new text messageYou have the following options for creating a text message:–"New text": The input menu is opened and new text can be entered.–"Last text": The input menu is opened and the text of the last message is shown in the text field. You can edit or add to this text as required.–"Templates": A list of the message templates is opened and a template can be accepted by selecting it or edited.Creating a text message with new text1. Press the c button. 2. Select "Messages".3. Select the first list entry, "New message", in the list that appears.4. Select "New text". The input menu is opened.5. Enter the desired text using the input menu.6. Confirm your entry by selecting "OK".The text input menu is closed and the input menu for the telephone number is opened. 7. Enter the telephone number of the recipient.The following options are available to you for this:– Enter the digits in the input menu.–Select "Phonebook" to insert the number from the phonebook.Select the desired number to enter it in the input menu.8. Select "Send" to send the message.Editing and sending the text of the last message1. Press the c button. 2. Select "Messages".3. Select the first list entry, "New message", in the list that appears.4. Select "Last text".5. Edit the text displayed using the input menu and add to it if applicable.6. Confirm your entry by selecting "OK".The text input menu is closed and the input menu for the telephone number is opened. 7. Enter the telephone number of the recipient.The following options are available to you for this:– Enter the digits in the input menu.–Select "Phonebook" to insert the number from the phonebook.Select the desired number to enter it in the input menu.8. Select "Send" to send the message.Creating a text message using a text template1. Press the c button. 2. Select "Messages".3. Select the first list entry, "New message", in the list that appears.4. Select "Templates".5. Select the desired template in the displayed list.

PHONE 776. Select "Edit template" if applicable and make the desired changes in the text. Otherwise select "Use template" and add any additional information required.7. Confirm your entry by selecting "OK".If your vehicle is equipped with a navigation system, some of the templates will be automatically completed when they are selected. These are templates containing navigation data such as the time of arrival or the destination, for example.8. Enter the telephone number of the recipient.The following options are available to you for this:– Enter the digits in the input menu.– Select "Phonebook" to insert the number from the phonebook.Select the desired number to enter it in the input menu.9. Select "Send" to send the message.Forwarding a text message1. Press the c button. 2. Select "Messages". 3. Select the text message you wish to forward.4. Select "Forward".The input menu is opened.5. Edit the text message as required and confirm by selecting "OK". The text input menu is closed and the input menu for the telephone number is opened. 6. Enter the telephone number of the recipient.The following options are available to you for this:– Enter the digits in the input menu.–Select "Phonebook" to insert the number from the phonebook.Select the desired number to enter it in the input menu.7. Select "Send" to send the message.Deleting a text message 1. Press the c button. 2. Select "Messages". 3. Select the text message you wish to delete.4. Select "Delete".You can then choose whether to delete the selected text message only or the entire list.Deleting the selected text message5. Confirm the message that appears by selecting "Yes".The selected text message is deleted.Deleting all text messages5. Select "Delete all".6. Confirm the message that appears by selecting "Delete all" again.The text messages are deleted.

78 PHONEReading a vCard1. Press the c button. 2. Select "Messages". 3. Open the relevant vCard by selecting it.4. Select "All details" to view all of the details in the vCard.If you save the vCard, the telephone numbers will be displayed in the phonebook and any geographical coordinates will be displayed in the list of personal destinations in the navigation system.Saving a vCard1. Press the c button. 2. Select "Messages". 3. Open the relevant vCard by selecting it.4. Select "Accept".5. Close the message that the data has been accepted by selecting "OK".Discarding a vCard1. Press the c button. 2. Select "Messages". 3. Open the relevant vCard by selecting it.4. Select "Discard".The vCard is closed and no longer displayed in the list of received messages.Numbers in text messagesIf a text message contains telephone numbers or geographical coordinates, you can store these directly in the phonebook or list of personal destinations.Calling telephone numbers from a text message1. Press the c button. 2. Select "Messages". 3. Open the relevant text message by selecting it.4. Select "Extract number".A list of the numbers contained in the text message is displayed.5. Select the desired number in the list.6. Select "Add to number" if applicable and enter the necessary digits.7. Select "Call number".The call is made.Storing telephone numbers from a text message(only with the SIM card inserted)1. Press the c button. 2. Select "Messages". 3. Open the relevant text message by selecting it.4. Select "Extract number".A list of the numbers contained in the text message is displayed.5. Select the desired number in the list.6. Select "Store number".7. Enter the desired details.To find out more, please refer to the section "PCM phonebook" on page 68.Using geographical coordinates for route guidance1. Press the c button. 2. Select "Messages". 3. Select "Extract number".4. Open the relevant geographical coordinate by selecting it.The map display is opened and the geographical coordinate is shown. To find out more, please also refer to the section "Map display" on page 146.5. Select "Start route guidance".The route is calculated and route guidance starts.

PHONE 79Storing geographical coordinates1. Press the c button. 2. Select "Messages". 3. Select "Extract number".4. Open the relevant geographical coordinate by selecting it.The map display is opened and the geographical coordinate is shown. To find out more, please also refer to the section "Map display" on page 146.5. Select "Store position".The input menu is opened and the coordinate is entered in the input field.6. Enter the name of the geographical coordinate and confirm your entry by selecting "OK".The geographical coordinate is stored in the list of personal destinations and the map display is opened again.Displaying the complete text1. Press the c button. 2. Select "Messages". 3. Open the relevant text message by selecting it.4. Select "Complete text".The contents of the text message are shown across the entire display.Creating a templateIncluded in the list of templates are some blank entries that you can edit as required.1. Press the c button. 2. Select "Messages".3. Select the first list entry, "New message", in the list that appears.4. Select "Templates".5. Select a blank template in the list that is displayed.6. Select "Edit template" and enter the desired text. 7. Confirm your entry by selecting "OK".The template is saved with the entered contents and subsequently displayed in the list.8. Select "Use template" and add any additional information required.9. Enter the telephone number as described in the section "Creating a text message using a text template" on page 76.10.Select "Send" to send the edited template.

PHONE 81Accepting a callAs soon as a call comes in, an appropriate menu is temporarily displayed on the handset display. If available, the telephone number is displayed together with the name of the caller (if an assignment to an entry stored in the phonebook is possible).ûPress the left selection button under the "Accept." menu item.- or -ûPress the Answer button on the handset.If the cordless handset is not in the cradle, the ringtone of the PCM is accompanied by a further audio signal.Ending a callûPress the right selection button under the "End" menu item.- or - ûPress the End call button on the handset.Rejecting a callûWhen there is a call incoming, press the right selection button under the "Reject" menu item.Dialing a number1. Enter the individual digits in the telephone number one after the other using the keypad. 2. Press the left selection button under the "Call" menu item.The telephone call is established and the call menu is displayed.If the number dialed is busy, this will be indicated by a message in the display.Always enter the telephone number with the dialing code.You can correct an incorrectly entered number by pressing the right selection button under the "Delete" menu item.Temporarily muting the cordless handset microphoneYou can switch off (mute) the microphone of the handset during a telephone call. 1. Press the left selection button under the "Options" menu item.2. Select the "Microphone mute" menu item using the rocker button.3. Press the left selection button under the "Selection" menu item to activate ( ) or deactivate ( ) the function.Making a further callYou can establish a further connection with the "New call" function. You can either:– enter a new telephone number or– display and call entries from the phonebook, the list of previous calls, or the list of received calls.

82 PHONEEntering a new telephone number1. Press the left selection button under the "Options" menu item.2. Select the "New call" menu item using the rocker button.3. Press the left selection button under the "Selection" menu item.4. Enter the individual digits in the telephone number one after the other using the keypad. 5. Press the left selection button under the "Call" menu item.Calling an entry from one of the lists1. Press the left selection button under the "Options" menu item.2. Select the "New call" menu item using the rocker button.3. Press the left selection button under the "Selection" menu item.4. Select the desired list using the rocker button.5. Press the left selection button under the "Selection" menu item.6. Select the desired list item using the rocker button.7. Press the left selection button under the "Options" menu item.8. Select "Call" using the rocker button.9. Press the left selection button under the "Selection" menu item.The active call is retained if the second connection is established. You can switch between the two calls or hold a conference call.Call waiting (swapping) and conferenceThe call waiting (swapping) and conference functions are only available if supported and unlocked by the network provider. Call waiting (swapping)While you are on a call, you may receive a call from someone else.1. Press the left selection button under the "Accept." menu item if you would like to accept the incoming call.2. Press the right selection button under the "Swap" menu item to swap between the two calls.

84 PHONEThe letters on the keypad are active while you are entering the name.This means you can enter the letters a, b, and c, for example, by pressing the digit 2 repeatedly.The digits are reactivated when it comestime to enter the telephone number.The input mode can be switched using the "#" button.6. Press the left selection button under the "OK" menu item.7. Enter the number for the new phonebook entry.8. Press the left selection button under the "OK" menu item.The data is stored on the SIM card. An appropriate message is displayed if there is no more space on the SIM card.Editing a phonebook entry(only with the SIM card inserted) 1. Open the phonebook.2. Select the desired phonebook entry using the rocker button.3. Press the left selection button under the "Options" menu item.4. Select "Edit entry" using the rocker button.5. Press the left selection button under the "Selection" menu item.6. Edit the name of the phonebook entry as required.7. Press the left selection button under the "OK" menu item.8. Edit the telephone number of the phonebook entry as required.9. Press the left selection button under the "OK" menu item.The phonebook entry is stored.Deleting a phonebook entry1. Open the phonebook.2. Select the desired phonebook entry using the rocker button.3. Press the left selection button under the "Options" menu item.4. Select "Delete entry" using the rocker button.5. Press the left selection button under the "Selection" menu item.6. Press the left selection button under the "Yes" menu item to confirm the message.

PHONE 85Text messages (SMS)Some menu items are not available before the SMS list is loaded.Reading a text message 1. Press the left selection button under the "Menu" menu item.2. Select the "Messages" menu item using the rocker button.3. Press the left selection button under the "Selection" menu item.4. Select the "Input" menu item using the rocker button.5. Press the left selection button under the "Selection" menu item.The stored messages are listed. Small icons (open or closed envelopes) indicate whether or not the message has already been read.6. Select the desired message using the rocker button.7. Press the left selection button under the "Options" menu item.8. Select the "Read" menu item using the rocker button.9. Press the left selection button under the "Selection" menu item.The text message is opened.Replying to/forwarding a text message1. Press the left selection button under the "Menu" menu item.2. Select the "Messages" menu item using the rocker button.3. Press the left selection button under the "Selection" menu item.4. Select the "Input" menu item using the rocker button.5. Press the left selection button under the "Selection" menu item.6. Select the desired message using the rocker button.7. Press the left selection button under the "Options" menu item.8. Using the rocker button, select "Reply" or "Forward" depending on the function you wish to use.9. Press the left selection button under the "Selection" menu item.10.Enter the text using the letters on the keypad.11.Press the left selection button under the "Options" menu item.12.Select the "Send" menu item using the rocker button.13.Press the left selection button under the "Selection" menu item.The telephone number of the sender of the text message is displayed.14.Press the left selection button under the "OK" menu item.The text message is sent.Creating and sending a new text message1. Press the left selection button under the "Menu" menu item.2. Select the "Messages" menu item using the rocker button.3. Press the left selection button under the "Selection" menu item.4. Select the "Compose" menu item using the rocker button.5. Press the left selection button under the "Selection" menu item.6. Enter the text using the letters on the keypad.The letters on the keypad are active while you are entering the name.This means you can enter the letters a, b, and c, for example, by pressing the digit 2 repeatedly.The digits are reactivated when it comestime to enter the telephone number.Use the "#" button to switch the input mode between uppercase, lowercase, and digits.

86 PHONEIf you wish to insert the text from a template, select the "Discard template" menu item, highlight the desired template using the rocker button, and insert it by pressing the left selection button under the "Selection" menu item.7. Press the left selection button under the "Options" menu item. 8. Select the "Send" menu item using the rocker button.9. Press the left selection button under the "Selection" menu item.10.Enter the telephone number.11.Press the left selection button under the "OK" menu item.The text message is sent.Please proceed as follows if you wish to send the message to a telephone number from the phonebook or from one of the two lists ("Previous calls" and "Received calls"):12.Press the left selection button under the "Search" menu item.13.Select the desired list ("Phonebook", "Previous calls", and "Received calls") using the rocker button.14.Select the desired entry. 15.Press the left selection button under the "Selection" menu item.The number is inserted in the text field.16.Press the left selection button under the "OK" menu item.The text message is sent.Deleting a text message 1. Press the left selection button under the "Menu" menu item.2. Select the "Messages" menu item using the rocker button.3. Press the left selection button under the "Selection" menu item.4. Press the left selection button under the "Options" menu item.5. Select the "Input" menu item using the rocker button.6. Press the left selection button under the "Selection" menu item.7. Select the desired message using the rocker button.8. Press the left selection button under the "Options" menu item.9. Using the rocker button, select the "Delete" menu item if you only want to delete the selected text message.Or: Using the rocker button, select the "Delete all" menu item if you wish to delete all saved text messages.10.Press the left selection button under the "Yes" menu item to delete the message.

88 PHONETelephone settings (PCM telephone)Switching the PCM telephone on and offSwitching the telephone on1. Press the c button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PHONE" >"Telephone settings". > Select "Switch on telephone".The telephone is switched on.Switching the telephone off1. Press the c button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PHONE" >"Telephone settings". > Select "Switch off telephone".The telephone is switched off. All functions not dependent on the telephone are still available.Setting ringtonesSetting the ringtone type1. Press the c button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PHONE" >"Telephone settings" >"Ringtone settings" > "Ringtone type".A list of the available ringtones is displayed.4. Set the desired ringtone by selecting it.The ringtone type is played after it is selected. 5. You can change the volume of the ringtone type if necessary by turning the left rotary knob t. The volume level set in this way is saved when you exit the menu.Setting the ringtone volume1. Press the c button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PHONE" >"Telephone settings">"Ringtone settings" > "Ringtone volume".4. Make the desired setting by turning the right rotary knob q or by selecting the two symbols and .Selecting a networkYou can set your PCM so that the network will be automatically or manually selected.1. Press the c button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PHONE" >"Telephone settings" >"Network selection".

PHONE 894. Select one of the two available menu items:–AutomaticThe PCM automatically selects the cell phone network of the SIM card that is logged in.If this network is not found (e.g. when abroad), the network of a roaming partner is automatically selected. –ManualIf you select Manual, the PCM telephone searches for the currently available networks and you can choose the desired cell phone network from the list of available networks.Displaying the IMEIThe IMEI (International Mobile Equipment Identity) is a serial number that permits unique identification of the hardware in mobile radio equipment. This number allows different network providers to block the telephone in the event of misuse.1. Press the c button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PHONE" >"Telephone settings">"IMEI".The device number is displayed.Call settings (PCM telephone)Setting call forwardingCall forwarding allows you to forward (divert) calls to another telephone number (e.g. to your answering machine).When you first access the call forwarding system, the status of all call diversions in the network is automatically queried. The individual call forwarding functions cannot be selected during this time.Activating and deactivating call forwarding is not supported in all networks.1. Press the c button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PHONE" >"Call settings" > "Call forwarding".

90 PHONE4. Select one of the following settings for the call diversion:–Divert allactivates call forwarding for all incoming calls.–Busyactivates call forwarding for calls that come in while you are on another call.To be able to activ ate ca ll forw arding with the "Busy" setting, the "Call waiting" function must be switched off. –No answeractivates call forwarding for calls that you cannot or do not want to accept. The call is forwarded to the entered number after a certain time.–Cannot be reachedactivates call forwarding for calls that come in while the telephone is switched off or is not ready to receive calls.–Cancel alldeactivates all call diversions at once. The telephone numbers entered for the individual call diversions remain saved in the network and are displayed again the next time call forwarding is activated.5. Select "Switch on". The input menu is opened.6. Enter the desired telephone number for the call diversion and confirm your entry by selecting "OK".- or - Select "Phonebook".After selecting Phonebook, you can select a number from the phonebook. The call is then diverted to this number.To find out more, please refer to the section "Calling a phonebook entry" on page 68.7. If you set the "No answer" call diversion type, you also need to set the delay after which the calls are to be diverted.Select "Delay".Set the desired delay by selecting it in the list that appears.The relevant call diversion is then activated and the settings are shown on the display.Checking the status of the call diversion1. Select the desired type of call diversion.2. Select "Check status".The current status is then queried in the network and shown on the display after a few seconds.Deactivating call diversion1. Select the desired type of call diversion.2. Select "Switch off". The corresponding call diversion is deactivated.Switching the "Call waiting" function on and offIf the "Call waiting" function is activated, an incoming call will be indicated during an active call.The caller hears the dialing tone.1. Press the c button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PHONE" >"Call settings" > "Call waiting".

PHONE 914. Select one of the following options:– Select "Switch on" to activate the function.– Select "Switch off" to deactivate the function.– Select "Check status" if the current status is unknown and should be queried in the network. The current status will be displayed in the information area as soon as the query is answered.Switching the "Redial" function on and offIf the "Redial" function is activated, the telephone automatically redials a number if it could not be reached because the line was busy.1. Press the c button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PHONE" >"Call settings".4. Select "Redial" to switch the function on ( ) or off ( ).Setting transfer of your own numberIf the "Send own number" function is activated, your own telephone number will be sent to the other party.1. Press the c button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PHONE" >"Call settings"> "Send own number".4. Select one of the following menu items:–"Yes" if you wish to send your own number.–"No" if you wish to suppress sending of your own number.–"As network" if you wish to adopt the network provider's setting. Depending on the network provider, it may not be possible to switch off sending of your own number.If you need to enter numbers with special characters (+, #, or *), you must choose the "As network" setting.Setting automatic call answeringIf the "Auto. answer" function is switched on, the PCM automatically answers all incoming calls after the first ring. The active audio source is muted and the hands-free function automatically activated.1. Press the c button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PHONE" >"Call settings".4. Select "Auto. answer" to switch the function on ( ) or off ( ).

94 PHONESIM settings (PCM telephone)Making settings for PIN entryChanging the PINThis function allows you to change the PIN of your SIM card.1. Press the c button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PHONE">"SIM settings" > "Change PIN".The input menu for PIN entry is displayed. You must start by entering the current PIN.4. Enter the current PIN by selecting the buttons on the keypad shown and confirm your entry by selecting "OK".You are then prompted to enter the new PIN.5. Enter the new PIN by selecting the buttons on the keypad shown and confirm your entry by selecting "OK".You are then prompted to enter the new PIN a second time to confirm it.6. Enter and confirm the PIN once more.If the two new PINs match you will see the message "PIN has been changed".If the two entries do not match, you will be prompted to enter the new PIN once more.Switching the PIN prompt on and offThe "PIN prompt" function allows you to switch the PIN prompt on and off.If the function is switched on, you will be prompted for the PIN after you insert the SIM card. If the function is switched off, the PIN prompt is deactivated.1. Press the c button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PHONE">"SIM settings".4. Select "PIN prompt" to activate ( ) or deactivate ( ) the function.If the PIN prompt is switched on, the input menu for entering the PIN opens.5. Enter the PIN if necessary.The PIN prompt is activated if the PIN is entered correctly.With some SIM cards you can not switch off the PIN prompt.The PIN cannot be changed using the "Change PIN" function while the PIN prompt is switched off.Using a stored PINIf the "Last PIN" function is switched on, the PIN of the SIM card currently inserted is stored. The next time you insert the SIM card, the stored PIN is automatically used for the prompt. 1. Press the c button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PHONE">"SIM settings".4. Select "Last PIN" to activate ( ) or deactivate ( ) the function.If an incorrect PIN entry is registered when the SIM card is inserted, the last PIN will not be used further. The input menu and the number of attempts still possible are displayed instead.

96 PHONESetting automatic transfer of the phonebookIf the "Auto update" function is switched on, a cell phone's phonebook will be transferred each time the PCM is connected to the cell phone. The phonebook stored in the PCM is replaced by the current phonebook from the cell phone once transfer is complete. If the "Auto update" function is switched off, the data will no longer be updated.This function is not supported by all cell phones.1. Press the c button. 2. Press the i button or touch the tab of the same name in the header.3. Select "SET PHONE" >"Messages/data" >"Phonebook settings".4. Select "Auto update" to activate ( ) or deactivate ( ) the function.Transferring the phonebookThis setting transfers the phonebook of the connected cell phone once more into the PCM. The phonebook stored in the PCM is replaced by the current phonebook from the cell phone once transfer is complete.1. Press the c button. 2. Press the i button or touch the tab of the same name in the header.3. Select "SET PHONE" >"Messages/data" > "Transfer phonebook".

INFO 97INFOInformation ................................................. 98Displaying traffic messages (XM NavTraffic).......................................... 98Displaying sections of the route ................ 100Displaying information about the location ............................................. 100Displaying detailed information about the active audio source................... 100Individual vehicle settings(only available for sports cars).................... 101Setting options for locking the doors......... 101Setting light options................................. 101Choosing the options for setting the air conditioning .................................. 102Setting wiper options ............................... 103Assigning the screen button on the multi-function steering wheel........... 103Rear view camera(only available for the Cayenne) .................. 104Extending and retracting therear view camera..................................... 104Picture settings for the rear view camera..................................... 105

98 INFOInformationIn the d menu you will find various general information such as the current audio source, the date and time, and the signal strength for your telephone network. You also have the option to call up more detailed information about the traffic situation, your current location, the individual sections in your route, or the current audio source.Displaying traffic messages (XM NavTraffic)XM Satellite Radio broadcast traffic messages as a part of their program. The PCM evaluates and displays this information. The navigation system takes these traffic messages into consideration during dynamic route calculation.XM Satellite Radio request payment of an additional fee to enable this service. XM Satellite Radio is responsible for the quality of the traffic messages. For that reason, no liability can be accepted for the completeness and correctness of the information.You can display the current traffic messages in a list. The following types of traffic messages are differentiated:IncidentsObjects on the roadObjects on a section of the current, personal routeAccidentAccident on a section of the current, personal routeConstructionConstruction on a section of the current, personal routeSlow moving trafficSlow moving traffic on a section of the current, personal route

INFO 991. Press the d button.2. Select "Traffic messages".A list containing all current traffic messages is opened. The traffic messages on your route are highlighted in orange in this list.3. Select a traffic message from the list to call up more detailed information on it.You then see a map section showing the route section in question as well as the full text of the traffic message.4. You can change the map scale if necessary by selecting the two symbols and .You can browse the various traffic messages by selecting the symbols and or by turning the right rotary knob q.In the case of very long traffic messages, you can scroll to the previous or next page by selecting the symbols and .Accident hazardAccident hazard on a section of the current, personal routeRoute section blockedSection of the current, personal route blockedInformationInformation concerning a section of the current, personal routeSpeed & Flowtraffic congestion on a section of the current, personal route - estimated average speed on red colored street sections is lower than 10 mphtraffic congestion on a section of the current, personal route - estimated average speed on yellow colored street sections is lower than 30 mph

100 INFODisplaying sections of the routeIf you have started the route guidance component of your navigation system, a list containing all sections of your route will be displayed. This function is not available if off-road mode is active.1. Press the d button.2. Select "Route list".The sections of your route are listed and displayed.The section you are currently driving on is at the very top of this list and the final destination is at the very bottom.3. Select the desired section for a more detailed view.You then see a map section showing the route section in question.4. You can change the map scale if necessary by selecting the two symbols and .You can browse the various sections by selecting the symbols and or by turning q the right rotary knob.5. If you would like to make a detour around this section of your route, select "Detour".To find out more about setting detours, please refer to the section "Setting a detour" on page 133.Displaying information about the locationThis function displays the precise data for your current location. If the route guidance component of your navigation system is active, the next route section is also displayed.1. Press the d button.2. Select "Location info".The information about your current location and its environs is displayed.Displaying detailed information about the active audio sourceThis function displays information about the audio source currently active. 1. Press the d button.2. Select "Details SOURCE".The available information is displayed.If the display of the radio text has been switched off in the m menu, it will not be displayed here either. To find out more about this, please refer to the section "Switching RDS radio text on and off" on page 25.With digital reception, the station, the start/end time, the name of the current program, the progress bar (showing how far along the program is), and the genre are displayed in TV mode. Further details about the program can also be displayed in a list. If the information exceeds a page, you can scroll through the text using the symbols and or by turning q the right rotary knob. The availability and amount of additional information transmitted varies from station to station. With analog reception, only the name of the station and the channel on which the program is being broadcast are displayed.

INFO 101Individual vehicle settings(only available for sports cars)In the PCM menu you have the option to store different settings for your vehicle for up to three ignition keys. Setting options for locking the doorsSetting doors to be unlocked for radio remote controlYou can choose the doors to be unlocked after the radio remote is pressed. The menu items "Both doors" and "Driver‘s door" are available.1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "Individual memory" >"Locking system" > "Door opener".4. Select the desired option.Setting automatic locking of the doorsIn the "Autolock" menu you can choose whether the doors are to be locked automatically after switching on the ignition or after driving off (as soon as a speed of 3-6 mph has been exceeded).1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "Individual memory" >"Locking system" > "Autolock".4. Select the desired option.Selecting "Off" deactivates the function.Setting light optionsSetting the fade-out timeYou can set a fade-out time of between 10 and 120 seconds for your vehicle's tail lights and front fog lamps.1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "Individual memory" >"Light" > "Fade-out time".4. Set the time desired period by touching the two symbols and or by turning t the right rotary knob.The setting is immediately applied.The "Fade-out time" setting also changes the illumination duration when unlocking the vehicle.To find out more about this, please refer to the chapter "Welcome home function" in the owner's manual.

102 INFOSetting the orientation lightThe so-called orientation light serves to help passengers enter the vehicle safely. A lamp is installed near the interior mirror for this purpose.You can set the intensity of the orientation light on a scale from 0 to 10.1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "Individual memory" >"Light" > "Orientation light".4. Set the desired intensity by touching the two symbols and or by turning the right rotary knob t. The setting is immediately applied.Setting the daytime running lightsIf the "Daytime Run. Lights" function is active (), the dimmed headlights will always be switched on when the engine is running. This applies regardless of the light switch setting.The lighting for the instruments and switches is still switched on and off using the light switch regardless of the "Daytime Run. Lights" setting.The "Daytime Run. Lights" setting can only be changed when the vehicle is stationary or moving at walking speed.The function is only available in countries where daytime running lights are not mandatory.1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "Individual memory" >"Light".4. Select "Daytime Run. Lights" to activate ( ) or deactivate ( ) the function.Choosing the options for setting the air conditioningThe "Air conditioning" option lets you save the current air conditioning settings as your personal settings.Once you have done this, you can reactivate your personal air conditioning settings at any time.1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "Individual memory">"Air conditioning".4. Select one of the two available options:–"A/C memory" If the "A/C memory" function is activated (), your personal air conditioning settings will be restored each time the vehicle is started. This happens regardless of the current air conditioning settings.If the function is deactivated then the air conditioning continues to work with the current settings.–"Store" Selecting "Store" stores the current settings as your personal settings.

INFO 103Setting wiper optionsYou can choose whether you wish to switch on your vehicle's windscreen wipers yourself or whether they are to be controlled automatically.Setting activation of the rain sensor1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "Individual memory" >"Wiper" > "Rain sensor".4. Select "Manual" if the rain sensor is to be manually started.Select "Active with ignition“ if the rain sensor is to be permanently activated as soon as the wiper switch is set to intermittent mode.Setting activation of the rear wiper1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "Individual memory" >"Wiper" > "Rear wiper".4. Select "Manual" if the rear wiper is to be manually started.Select "Automatic" if the rear wiper is to be automatically switched on. This happens as soon as reverse gear is engaged if the front wiper was active during the previous 40 seconds.Assigning the screen button on the multi-function steering wheelYou have the option to assign the screen button on the multi-function steering wheel of your vehicle with a PCM function of your choice.Pressing the screen button displays this function.Pressing it again terminates the function and returns to the initial menu. The only exception is the "Scroll through main menus" function. Here the various main menus are called one after the other.1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "Multi-funct. steer. whl.".A list containing the various setting options is opened. 4. Select the desired setting.

104 INFORear view camera(only available for the Cayenne)The rear view camera makes it easier to monitor parking maneuvers as well as the area immediately behind the vehicle. It is mounted on the vehicle tailgate.The image from the rear view camera is shown on the PCM display.The TV sound is suppressed when the camera is extended. Audio source (FM, AM, CD/DVD, and AUX) sound output continues uninterrupted. Voice control is not available when the camera is extended.Extending and retracting the rear view cameraYou can choose different settings for the retraction and extension conditions.Extending and retracting the rear view camera manually1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "Rear view camera".4. Select "Show image".The rear view camera is extended. The image is shown on the PCM display.5. Pressing the Back button h retracts the rear view camera once more.The rear view camera is also retracted if– the vehicle ignition is switched off,– the vehicle tailgate is opened,– the PCM is switched off, or– a speed of approx. 10 mph is exceeded.Extending the rear view camera automaticallyIf this function is switched on, the camera automatically extends when reverse gear is engaged and transmits its image to the PCM display.DANGER!Injury hazard. The rear view camera only serves to assist the driver. It does not replace looking over your shoulder.While its display is generally accurate, objects can be distorted in size, proportion, and depth of field when seen through the rear view camera.The camera view does not cover the complete area behind the vehicle.ûContinue to pay attention to the complete area behind the vehicle.NOTICERisk of damage. ûDo not extend the rear view camera when in a car wash.

INFO 1051. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "Rear view camera".4. Select "Automatic" to switch the function on ( ) or off ( ).Retracting the rear view camera automaticallyIf the "Automatic" function is switched on, the rear view camera automatically retracts under the following conditions:– If reverse gear is disengaged again, the rear view camera is retracted after 30 seconds or after a vehicle speed of approx. 10 mph is exceeded.It is only possible to extend the camera again when the vehicle speed has returned to below this limit.– If the parking brake pedal is operated. – If the PCM is switched off.– If the engine is switched off.– If the vehicle tailgate is opened.After the rear view camera is retracted, the original PCM display is shown again.Picture settings for the rear view cameraSetting the Brightness1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "Rear view camera" > "Picture param. - RVC"> "Brightness".4. Make the desired setting by selecting the two symbols and or by turning the right rotary knob t.5. If the rear view camera is automatically activated, select "Back to RVC" to finish setting the picture parameters and to return to the camera image.Setting the Contrast1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "Rear view camera" > "Picture param. - RVC" > "Contrast".4. Make the desired setting by selecting the two symbols and or by turning the right rotary knob t.5. If the rear view camera is automatically activated, select "Back to RVC" to finish setting the picture parameters and to return to the camera image.Setting the Color1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "Rear view camera" > "Picture param. - RVC" > "Color".4. Make the desired setting by selecting the two symbols and or by turning the right rotary knob t.5. If the rear view camera is automatically activated, select "Back to RVC" to finish setting the picture parameters and to return to the camera image.

106 TRIP TRIPTrip computer (trip data display) ................. 107Setting the display group .......................... 107Setting the contents of the personal display .......................................107Resetting trip data....................................107Logbook ................................................... 108Activating/deactivating the logbook ...........108Activating/deactivating the logbook reminder..................................... 108Setting the standard trip for the logbook .............................................109Editing data from the current trip...............109Continuing recording from the last trip .......111Storing a refueling stop ............................111Viewing the list of stored trips ...................111Managing the logbook lists........................ 111Transferring the logbook data ...................113Deleting trips ...........................................114The Sport display(only available for sports cars) .................... 115Starting recording ....................................115Stopping recording...................................116Continuing recording ................................116Ending a lap/starting a new lap .................116Timing the interval ....................................116Evaluating a recording ..............................117Renaming a recording...............................117Deleting a recording .................................118Deleting a lap ...........................................118Storing a lap as the reference lap ..............118Defining the reference lap .........................119Resetting the defined reference lap............119Renaming the reference lap.......................119Deleting the reference lap .........................119Transferring data......................................119

TRIP 107Trip computer (trip data display)The trip computer (TRIP) provides you with a variety of useful trip data such as the trip time, distance covered, average speed, or average fuel consumption.The following display groups are differentiated depending on the vehicle's equipment:–Total trip dataThe trip data is totaled continuously until reset. The trip data is retained even after the vehicle has been stationary (with the ignition key removed) for relatively long periods.–Trip data since ...The trip data is automatically reset after the vehicle has been stationary (with the ignition key removed) for two hours.–Personal trip dataThe trip data can be individually compiled in four data fields.–Sport display(only available for sports cars)Lap data can be recorded and evaluated using the stopwatch and the PCM. The data of relevance for the evaluation is shown in the Sport display as soon as recording is started.The number of displays available to you is shown between the two arrow symbols and . Setting the display groupûLightly touch the symbols and .- or - ûTurn the right rotary knob q.Setting the contents of the personal displayYou can configure the contents of the individual data fields for the "Personal trip data" display yourself.1. Press the e button. 2. Press the i button or touch the tab of the same name in the header.3. Select "Personal adaptation".4. Select the data field to be changed.A list containing multiple menu items is opened.5. Select the desired menu item.The chosen menu item is inserted in the corresponding data field.Resetting trip dataYou reset the trip data in the "Total trip data" and "Trip data since ..." display groups by pressing the button field for at least 1 second.1. Press the e button. 2. Set the display to be reset by selecting the symbols and .3. Select for at least 1 second.The trip data in the corresponding display is reset.

108 TRIPLogbookThe logbook automatically records all the trips made by the vehicle and stores them together with a variety of relevant information. This includes:– the type of use (business trip, work trip, or private trip), – the date and time, – the start address, –the destination address, – the distance as well as – the odometer reading at the start and destination locations.Recording of a trip is started and ended automatically when the logbook is activated. It begins as soon as the vehicle key is inserted.When the vehicle key is removed, recording stops and the information is stored.If a distance of less than approx. 350 feet is driven, the route is not recorded and is added to the next trip.The trips are recorded even if the PCM is in standby mode.The logbook can record and store up to 1,500 trips. The stored data can be transferred to a Bluetooth device or a USB device.The logbook must be activated before it can be used.Activating/deactivating the logbook1. Press the e button. 2. Press the i button or touch the tab of the same name in the header.3. Select "SET TRIP" if applicable (if your vehicle is equipped with the Sport Chrono Package Plus).4. Select "SET logbook".5. Select "Logbook active" to activate ( ) or deactivate ( ) the function.Activating/deactivating the logbook reminderIf you have activated the "Reminder" function, the logbook menu is displayed for a few seconds each time the PCM starts.1. Press the e button. 2. Press the i button or touch the tab of the same name in the header.3. Select "SET TRIP" if applicable (if your vehicle is equipped with the Sport Chrono Package Plus).4. Select "SET logbook".5. Select "Reminder" to activate ( ) or deactivate ( ) the function.

TRIP 109Setting the standard trip for the logbookYou can use the "Standard trip" function to choose the trip type to be set as standard at the start of a journey.The following trip types are available:–"Business trip", –"Work trip", –"Private trip", and –"Last trip".The trip type "Last trip" is only available to you if at least one trip has been recorded.1. Press the e button. 2. Press the i button or touch the tab of the same name in the header.3. Select "SET TRIP" if applicable (if your vehicle is equipped with the Sport Chrono Package Plus).4. Select "SET logbook"> "Standard trip".5. Select the desired trip type.Editing data from the current tripYou can change the different pieces of data registered by the logbook during recording of a trip as many times as you want during the trip.Changing the trip type1. Press the e button.2. Press the i button or touch the tab of the same name in the header.3. Select "Logbook" >"Current trip".4. Select the desired trip type.Changing the driver1. Press the e button.2. Press the i button or touch the tab of the same name in the header.3. Select "Logbook" >"Current trip" > "Edit trip" > "Driver".A list of all the drivers created so far is opened.If a driver has been assigned a specific key, this is also shown in the list.4. Insert the desired driver by selecting.Creating a new driver1. Press the e button.2. Press the i button or touch the tab of the same name in the header.3. Select "Logbook" >"Current trip" > "Edit trip" > "Driver"> "New driver".The input menu is opened.4. Enter the name of the new driver and confirm by selecting "OK".If the current trip is a Work trip or Private trip rather than a Business trip, the only fields available to you are "Driver" and "Remarks".Changing the trip destination1. Press the e button.2. Press the i button or touch the tab of the same name in the header.3. Select "Logbook" >"Current trip" > "Edit trip" > "Trip destination".A list of all the destinations created so far is opened.4. Insert the trip desired destination by selecting it.

110 TRIPCreating a new trip destination1. Press the e button.2. Press the i button or touch the tab of the same name in the header.3. Select "Logbook" >"Current trip" > "Edit trip" > "Trip destination"> "New trip destination".The input menu is opened.4. Enter the new trip destination and confirm by selecting "OK".Changing the trip purpose1. Press the e button.2. Press the i button or touch the tab of the same name in the header.3. Select "Logbook" >"Current trip" > "Edit trip" > "Trip purpose".A list of the trip purposes already created is opened.4. Insert the desired trip purpose by selecting it.Creating a new trip purpose1. Press the e button.2. Press the i button or touch the tab of the same name in the header.3. Select "Logbook" >"Current trip" > "Edit trip" > "Trip purpose"> "New trip purpose".The input menu is opened.4. Enter the new trip purpose and confirm by selecting "OK".Changing the contact person1. Press the e button.2. Press the i button or touch the tab of the same name in the header.3. Select "Logbook" >"Current trip" > "Edit trip" > "Contact person".A list of the contact persons already created is opened.4. Insert the desired contact person by selecting.Creating a new contact person1. Press the e button.2. Press the i button or touch the tab of the same name in the header.3. Select "Logbook" >"Current trip" > "Edit trip" > "Contact person"> "New contact person".The input menu is opened.4. Enter the new contact person and confirm by selecting "OK".Changing the remarks1. Press the e button.2. Press the i button or touch the tab of the same name in the header.3. Select "Logbook" >"Current trip" > "Edit trip" > "Remarks".The input menu is opened.4. Enter the desired text and confirm by selecting "OK".

TRIP 111Continuing recording from the last tripIf you have completed a trip with the logbook activated, you can resume the previous trip the next time a trip is started.1. Press the e button. 2. Press the i button or touch the tab of the same name in the header.3. Select "Logbook" > "Continue trip".The data from the last recorded trip is displayed.You are then asked once more whether you wish to continue the last trip.4. Select "Yes" to confirm the question.Recording of the last trip is continued.Storing a refueling stopYou can store any refueling stops during the trip currently being recorded by selecting "Refueling stop".1. Press the e button. 2. Press the i button or touch the tab of the same name in the header.3. Select "Logbook" > "Refueling stop".The question "Store refueling stop?" is displayed.4. Select "Yes" to confirm the question.The refueling stop is stored.Viewing the list of stored trips1. Press the e button. 2. Press the i button or touch the tab of the same name in the header.3. Select "Logbook" > "Trip list".The trip list is displayed. If a recording is currently in progress, it is displayed at the top of the list.4. Select a trip to open a detailed view of it. You can switch between the detailed views for the individual trips by selecting the symbols and .You can switch between scrolling in the detailed view and scrolling in the list by pressing the right rotary knob r.Managing the logbook listsIn addition to the list of stored trips, lists for the Driver, the Trip purpose, the Trip destination, and the Contact person are also created in the logbook.Creating a new list entryYou can create a new entry by selecting the first entry in any list (e.g. "New driver").1. Press the e button. 2. Press the i button or touch the tab of the same name in the header.

112 TRIP3. Select "SET TRIP" if applicable (if your vehicle is equipped with the Sport Chrono Package Plus).4. Select "SET logbook"> "Manage lists".5. Select the desired list.6. Select the top list entry.The input menu is opened.7. Enter the desired name and confirm by selecting "OK".The entry is then created in the list.Renaming a list entryYou can rename the individual list entries as many times as you want.1. Press the e button. 2. Press the i button or touch the tab of the same name in the header.3. Select "SET TRIP" if applicable (if your vehicle is equipped with the Sport Chrono Package Plus).4. Select "SET logbook"> "Manage lists".5. Select the desired list.6. Select the desired list entry.7. Select "Rename".The input menu is opened.8. Enter the desired name and confirm by selecting "OK".The name is now changed.Deleting a list entryYou can delete each individual entry in a list.1. Press the e button. 2. Press the i button or touch the tab of the same name in the header.3. Select "SET TRIP" if applicable (if your vehicle is equipped with the Sport Chrono Package Plus).4. Select "SET logbook"> "Manage lists".5. Select the desired list.6. Select the desired list entry.7. Select "Delete".8. Answer the question displayed by selecting "Yes".The list entry is deleted.Assigning the current key to a driver in the driver listYou can assign the key currently being used to a driver in the list. If this key is used again when the logbook is activated, the logbook "recognizes" the driver and automatically records their name.1. Press the e button. 2. Press the i button or touch the tab of the same name in the header.3. Select "SET TRIP" if applicable (if your vehicle is equipped with the Sport Chrono Package Plus).4. Select "SET logbook"> "Manage lists".5. Select the "Driver" list.6. Select the desired driver.7. Select "Assign key".If the key is already assigned to another driver, you are informed of this at this point. The existing key assignment is discarded once you confirm this message.8. Confirm the message by selecting "Yes".The key is assigned to the driver. The assignment is now also shown in the list.

TRIP 113Deleting an existing key assignmentYou can delete an existing key assignment once more.1. Press the e button. 2. Press the i button or touch the tab of the same name in the header.3. Select "SET TRIP" if applicable (if your vehicle is equipped with the Sport Chrono Package Plus).4. Select "SET logbook"> "Manage lists".5. Select the "Driver" list.6. Select the desired driver.7. Select "Delete key".8. Confirm the message by selecting "Yes".The assignment is deleted again.Transferring the logbook dataDepending on the equipment in your PCM, you can either transfer the stored data via the Bluetooth® interface or the USB interface. The data is not deleted during this process.Please note that the radio connection between the two devices must be activated for data transfer using Bluetooth®. To find out how to activate this radio connection, please refer to the section "Switching Bluetooth on" on page 51.You will only be able to access the "to USB" transfer method if there is a USB memory stick connected to the USB interface. To find out more about the permissible USB memory media, please refer to the section "Notes on the media supported" on page 42.1. Press the e button. 2. Press the i button or touch the tab of the same name in the header.3. Select "Logbook" > "Transfer data".Transferring data via the USB interface4. Select "to USB".The data is transferred provided there is a storage medium without write protection and with sufficient free memory connected.Otherwise you are notified of the problem with the data transfer by means of an error message.Transferring data via the Bluetooth interface4. Select "to Bluetooth".A list of the Bluetooth devices currently authorized is opened.5. The list of known devices that are suitable for a transfer is displayed. If the desired device is not there, you can search for further devices. To do this, press "New device" (see also the section "Adding a new Bluetooth device" on page 61). 6. Select the desired device in the list.The data is transferred.

114 TRIPThe name of the file where the transferred logbook data is stored is made up of the abbreviation "FB", the date (YYMMDD), and the extension ".bin".Please note, that the files get replaced without further notice when you transfer several logbooks at the same day. Therefore, transfer the data at all costs in different files on the data medium.Deleting tripsYou can either delete the trips already transferred from your logbook or all recorded trips.1. Press the e button. 2. Press the i button or touch the tab of the same name in the header.3. Select "SET TRIP" if applicable (if your vehicle is equipped with the Sport Chrono Package Plus).4. Select "SET logbook"> "Delete trips".Deleting trips already transferred5. Select "Transferred trips".6. Confirm by selecting "Yes".All trips already transferred are deleted.Deleting all trips5. Select "All trips".6. Confirm by selecting "Yes".All trips are deleted.

TRIP 115The Sport display(only available for sports cars)The Sport display is part of the Sport Chrono Package Plus that also includes a stopwatch and buttons for dynamic driving settings (Sport mode). The combination of the stopwatch and PCM allows lap data to be recorded and evaluated.The time is recorded by the stopwatch operated using the on-board computer in the instrument cluster.Please also refer to the chapter "Chrono" in your owner's manual for more information on this.The graphical display as well as the storage and evaluation of the recorded lap times and the associated lap lengths is performed by the PCM.The following information can be recorded and displayed for each driven lap:– the fastest lap time and in comparison the current lap time,– a comparison of the current lap and the fastest lap so far,– the portion of the lap already covered, and– the distance or number of laps possible with the remaining fuel.The functions of the Sport display can be used for any route (e.g. trip to work), not just laps.Any recorded lap/route can be defined as a reference route. This then forms the comparison basis for further laps/routes and recorded times. Laps/routes with lengths deviating from the reference lap by more than 15 percent (longer or shorter) are tagged in the evaluation.Starting recordingRecording starts as soon as you start the stopwatch in the CHRONO on-board computer menu. The first lap corresponds to the reference lap if none has already been loaded. The reference lap is needed to display the circle diagram and the remaining laps left in the tank.You start the recording as well as continue the individual laps by operating the stopwatch in the on-board computer menu.To find out more, please also refer to the corresponding chapter in the owner's manual.

116 TRIPLap detailsYou see the lap details in the right half of the display. It comprises: – the time of the fastest lap,– the current lap time,– information on the remaining tank range (in remaining laps and as a distance) as well as– the available remaining memory.The left half of the display shows a circle diagram. It indicates the distance covered referred to a complete lap.The circle diagram assumes different colors depending on whether the current lap is faster, as fast as, or slower than the previous fastest lap:– green - current lap is faster,– yellow - current lap is as fast,– red - current lap is slower.The number in the center of the colored circle indicates the current lap.The first recorded lap is used as the reference lap if you have not loaded an existing reference lap. Neither the remaining number of laps nor the fastest lap time is displayed while the first lap is being recorded. The circle diagram is not filled yet either.Available memory is fullIf the available memory is full, a message to this effect appears in the display. The lap details will continue to be displayed, however the lap during which the message appears as well as any further laps will no longer be recorded.A maximum of 8 hours can be recorded.Stopping recordingYou stop the stopwatch and therefore the recording in progress by selecting "Stop timing" in the on-board computer menu.The recorded data is stored.Continuing recordingYou are returned to the Sport display the next time you restart the stopwatch by means of "Continue" in the on-board computer menu.This is only possible, however, if you do not reset the stopwatch in the on-board computer menu.Ending a lap/starting a new lapSelecting "Intermediate time" > "New lap?" in the on-board computer menu ends one lap and starts a new lap. "Interval" initiates timekeeping and "New lap" initiates storage (storage must take place within 3 seconds).Timing the intervalSelecting "Intermediate time" in the on-board computer menu and then pressing the operating lever forwards displays the interval for approx. 5 seconds.

TRIP 117Evaluating a recording1. Press the e button. 2. Press the i button or touch the tab of the same name in the header.3. Select "Sport display" > "Recordings".A list of the stored recordings is opened. Reference laps are indicated in the list using the icon.4. Select the desired recording.5. Select "Evaluation".The individual laps are shown one beside the other as bars in the evaluation that appears. The height of the bars represents the respective lap time; the higher the bar, the longer the lap time.You can scroll forward and backward in the evaluation by:ûTouching the symbols and on the display.- or - ûTurning the right rotary knob q.Reference lapIf you did not define a reference lap when recording started, the first lap is treated as the reference lap and shown as "Lap 1/R".Fastest lapThe laps are generally displayed in orange. The only exception to this is the fastest lap, which is shown in white.Interrupted lapIf a lap is shown with a broken bar, this means that either the driving was interrupted or the vehicle was stationary for a time. "Stationary" in this context means the ignition is switched off.Implausible (divergent) laps are shown in gray.Implausible laps are shown in gray. Laps are regarded as implausible if their distance deviates significantly (more than 15%) from the reference lap.Renaming a recording1. Press the e button. 2. Press the i button or touch the tab of the same name in the header.3. Select "Sport display" > "Recordings".A list of the stored recordings is opened. Reference laps are indicated in the list using the icon.4. Select the desired recording.5. Select "Rename".The input menu is opened.6. Enter the desired name and confirm by selecting "OK".The name is now changed.

118 TRIPDeleting a recordingYou cannot delete a recording while the "Continue" function can be selected in the on-board computer. To be able to delete a recording, you must reset the stopwatch in the on-board computer menu first.1. Press the e button. 2. Press the i button or touch the tab of the same name in the header.3. Select "Sport display" > "Recordings".A list of the stored recordings is opened. Reference laps are indicated in the list using the icon.4. Select the desired recording.5. Select "Delete".6. Confirm the message by selecting "Yes".The recording is deleted.Deleting a lapYou cannot delete the last lap using the "Delete lap" menu item while the "Continue" function can be selected in the on-board computer. In this case you must reset the stopwatch in the on-board computer menu delete the lap afterwards. To find out more, please refer to the section "Deleting a recording" on page 118.1. Press the e button. 2. Press the i button or touch the tab of the same name in the header.3. Select "Sport display" > "Recordings".A list of the stored recordings is opened. 4. Select the desired recording.5. Select "Evaluation".6. Select the desired lap from the evaluation.7. Select "Delete lap".The lap is deleted from the evaluation.Storing a lap as the reference lap1. Press the e button. 2. Press the i button or touch the tab of the same name in the header.3. Select "Sport display" > "Recordings".A list of the stored recordings is opened. 4. Select the desired recording.5. Select "Evaluation".6. Select the desired lap from the evaluation.7. Select "Store reference".The lap is stored as the reference lap.

TRIP 119Defining the reference lapIf no reference lap is defined in advance, the first lap in a recording is automatically used as the reference lap.Furthermore, any lap already recorded can be defined as the reference lap for the next recording.1. Press the e button. 2. Press the i button or touch the tab of the same name in the header.3. Select "Sport display" > "Recordings".A list of the stored recordings is opened. The reference laps are indicated in the list using the icon.4. Select the desired reference lap.5. Select "Set reference".The chosen reference lap is used for future recordings.Resetting the defined reference lap1. Press the e button. 2. Press the i button or touch the tab of the same name in the header.3. Select "Sport display" > "Reset reference".The previously defined reference lap is reset. If no new reference lap is defined, the first lap is used again as the reference lap for any further recordings.Renaming the reference lap1. Press the e button. 2. Press the i button or touch the tab of the same name in the header.3. Select "Sport display" > "Recordings".A list of the stored recordings is opened.4. Select the desired reference lap.5. Select "Rename".The input menu is opened.6. Enter the desired name and confirm by selecting "OK".The name of the reference lap is now changed.Deleting the reference lap1. Press the e button. 2. Press the i button or touch the tab of the same name in the header.3. Select "Sport display" > "Recordings".A list of the stored recordings is opened.4. Select the desired reference lap.5. Select "Delete".6. Confirm by selecting "Yes".The recording is now deleted.Transferring data1. Press the e button. 2. Select the i button. 3. Select "Sport display" > "Recordings".A list of the stored recordings is opened.

120 TRIP4. Select the desired recording.5. Select "Transfer data".The list is opened again. You can now choose whether you wish to transfer an individual recording only or all recordings.Select the desired recording or list entry using "All".You can choose whether you wish to transfer the data to an external device via a Bluetooth connection or whether you wish to use the USB interface to transfer the data.A directory called "SportChrono" is created on the storage medium during transfer of the data.Transferring data via the USB interface6. Select "to USB".The data is transferred provided there is a storage medium without write protection and with sufficient free memory connected. Otherwise you are notified of the problem with the data transfer by means of an error message.Transferring data via the Bluetooth®interface Please note that the radio connection between the two devices must be activated for data transfer using Bluetooth®. To find out how to activate this radio connection, please refer to the section "Switching Bluetooth on" on page 51.You will only be able to access the "to USB" transfer method if there is a USB memory stick connected to the USB interface. To find out more about the permissible USB memory media, please refer to the section "Notes on the media supported" on page 42.6. Select "to Bluetooth".7. The list of known devices that are suitable for a transfer is displayed. If the desired device is not there, you can search for further devices. To do this, press "New device" (see also the section "Adding a new Bluetooth device" on page 61). 8. Sign on the desired device.

NAVI 121NAVIGeneral operation ...................................... 122Navigation safety instructions....................123Unverified areas in the database................123Setting the volume of the navigation announcement..........................124Entering an address................................... 124Entering the country .................................124Entering the town/zip code .......................125Entering the street/number .......................125Entering an intersection ............................125Starting and stopping route guidance .......... 125List of previous destinations ....................... 126Entering an address for a new route guidance session from the list .............................................126Displaying the location of a destination.......127Editing the address of a destination ........... 127Deleting a destination ...............................127Storing a destination in the personal destination memory ....................127Calling the destination...............................128Personal destination memory...................... 128Storing an address for personal destinations................................128Entering an address for route guidance from the list ......................129Displaying the location of a destination.......129Editing the address of a destination ...........129Entering/editing a telephone number for a destination in the destination memory .........................129Editing the destination name......................130Calling the destination...............................130Sending a destination ...............................130Deleting a destination ...............................131Points of interest ....................................... 131Searching for points of interest by category .............................................131Searching for points of interest by name ..................................................132Searching for points of interest by telephone number ................................132Searching for points of interest in the map display ....................................133Starting navigation to the point of interest........................................133Changing options for route guidance ........... 133Setting a detour .......................................133Canceling a block .....................................135Setting a short/quick route .......................135Setting dynamic route planning (XM NavTraffic).........................................135Avoiding a stretch of road .........................135Stopovers (tour)......................................... 136Displaying destinations..............................136Entering stopovers ...................................136Reorganizing the stopovers .......................137Deleting stopovers ...................................137Destination input using geographical coordinates ........................... 138Off-road navigation ..................................... 139Activating/deactivating off-road navigation....................................139Safety notice for off-road navigation...........140Landmark navigation.................................140Recording a trip section (trace)..................141Tracing a route.........................................143Storing...................................................... 144Storing a destination.................................144Storing a position .....................................144

122 NAVIGeneral operationWith its use of visual and acoustic driving recommendations, the PCM navigation system allows you to get to your destination quickly, comfortably, and without problems. The vehicle position is determined with the aid of a GPS antenna and a receiver in the navigation module. The vehicle position is calculated by evaluating and processing further vehicle signals (e.g. speed) in the navigation computer. This enables the system to automatically correct signal changes due to wheel changes (altered tire diameter), temperature, or air pressure variations.The PCM features a hard drive where the digital map data is stored. If an area on this hard drive is damaged or corrupt, the PCM can no longer access the data in it. An appropriate message will be displayed.The announcement of driving recommendations is suspended during a telephone call.To ensure you make the most effective use of your PCM navigation system, please observe the following points:– GPS reception can be impaired under trees or between high buildings. No GPS reception is possible in parking garages, tunnels, and similar.– The GPS antenna must not be covered by metallic or damp objects.– After the vehicle on-board voltage has been interrupted (e.g. for changing the vehicle battery), it can take up to 15 minutes or more depending on the reception conditions for the GPS to re-initialize.– After transporting the vehicle, for example by ferry, it can take a few minutes depending on the reception conditions after switching on until the current GPS position has been established.– Without GPS reception, the system calculates the current position using the vehicle signals and therefore remains operational in situations where the reception is temporarily poor.– After initial start-up of the navigation system, the fine calibration requires approx. 30 miles.– High wheel slip (spin on snow) can result in an incorrect position being given for a short time.– After a tire change (e.g. summer/winter tires), fine calibration will only be reached after up to 30 miles.– Fine calibration must be completed before full location accuracy is achieved.WARNING!Accident hazard. The navigation system serves only to assist the driver and provide a suggestion for the route of the journey. This does not release you from complete responsibility for your correct conduct in traffic according to the Road Traffic Regulations or other relevant regulations. As the driver you must assess the traffic situation. ûContinue to pay attention to the traffic situation.You have sole responsibility for road safety while driving your vehicle.

NAVI 123Navigation safety instructionsThe navigation system serves only to assist the driver and provide suggested driving directions. You alone bear the full responsibility for road safety. The Porsche Navigation System is provided as an aid for you to use with good judgment in connection with the normal operation of your vehicle. It is not a substitute for compliance with the traffic laws of the states in which you operate your vehicle nor does it ever relieve you of your legal obligation to exercise due care in the operation of your vehicle in order to avoid accidents or other injury to yourself, your occupants, the occupants of other vehicles, or pedestrians.Use your Porsche Navigation system at your own risk. Porsche is under no obligation to provide you with any support, error correction, updates, and/or enhancements to the system.Please note that the system is designed to provide as much available data as possible to you. Although this may be the best information available, we have no way of ascertaining the accuracy of all of such information. Accordingly, the system may include inaccuracies or errors. It is your responsibility to be alert to any road conditions or directions that may differ from those shown in or recommended by the Porsche Navigation system.This warning applies particularly when the system guides you into areas with non-verified roads. On these roads, errors may occur with regard to the course of the road, driving restrictions, street names, or address information, which may lead to faulty and incorrect route guidance information as well as positioning inaccuracies. When you switch on the PCM and press the f button for the first time, you will be shown a notice that the navigation system serves only to assist the driver.ûSelect "Confirm" to close this notice. Unverified areas in the databaseThe map material contained in the North America database generally contains detailed digitized areas. In rural areas, there may also be areas where digitization is inaccurate or incomplete. The inaccurately digitized areas are referred to as unverified areas and the roads as unverified roads. Within the unverified areas, errors in the database content may arise, in particular with regard to the course of the road, driving restrictions, street names, or address information.WARNING!Accident hazard. The navigation system serves only to assist the driver and provide a suggestion for the route of the journey. This does not release you from complete responsibility for your correct conduct in traffic according to the Road Traffic Regulations or other relevant regulations. As the driver you must assess the traffic situation. ûContinue to pay attention to the traffic situation.You have sole responsibility for road safety while driving your vehicle.

124 NAVIIn extreme cases, this type of error can lead to positioning inaccuracies of the car symbol on the map. During active route guidance, these errors may also result in the absence or incorrectness of visual and audible route guidance information.In the PCM map display, the unverified roads are shown as light-colored (orange-brown) roadways. The route calculated by the navigation system generally leads only through areas which have been digitized in detail. Only when a destination is located in an unverified area will the navigation system guide you into an unverified area shortly before reaching the destination. Setting the volume of the navigation announcement1. Press the b button.2. Press the i button or touch the tab of the same name in the header.3. Select "Guidance volume".4. Make the desired setting by selecting the two symbols and .Entering an addressAfter you select "Enter address", the address of the last destination is displayed in the information area. If route guidance is active, the address of the current destination is displayed.Observe the following points when entering a destination:– Address entry is only possible using the data available on the hard drive of the device. There may be restrictions regarding street names, street numbers, city centers, and points of interest. This applies particularly if the destination is located in a partly digitized area (map data for this area is inaccurate or incomplete).– Work is constantly being carried out on further data acquisition and updating. Information on new/updated software can be obtained from your authorized Porsche dealer.Entering the countryAfter you first select "Enter address", only the "Country" menu item can be selected. You must enter a country before you can enter the remaining address data. 1. Press the f button.2. Select "Enter address" > "Country". A list of the countries for which navigation data is stored on the hard drive is opened.3. Select the desired country in the list.

NAVI 125Entering the town/zip codeYou can enter the town either by means of the town name or by means of the zip code.1. Press the f button.2. Select "Enter address" > "Town/zip code". The input menu is opened.3. Enter the town name or the zip code. After you enter the first letters of the town, a list containing possible matches is opened.4. Select the desired town in the list. Entering the street/number1. Press the f button.2. Select "Enter address" > "Street/no.". The input menu is opened.3. Enter the street name. After you enter the first letters of the street name, a list containing possible matches is opened.4. Select the desired street in the list.You can also enter the street number retrospectively (when route guidance is already active). If you do so, however, you must then restart route guidance.Entering an intersection1. Press the f button.2. Select "Enter address" > "Intersection". The input menu is opened.3. Enter the name of the cross street. After you enter the first letters of the street name, a list containing possible matches is opened.4. Select the desired street in the list. Starting and stopping route guidanceStarting route guidanceTo be able to start route guidance, you must have entered at least a country and a town.ûAfter entering the address data, select "Start route guidance" to start the route guidance.Stopping route guidanceûSelect "Stop route guidance" in the main menu during an active route guidance session to stop route guidance.Activating alternative routes for route guidance1. Press the f button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET NAVI".4. Select "Route alternatives" to activate ( ) or deactivate ( ) the function.

126 NAVIStarting route guidance with route alternatives activatedIf you have activated route alternatives in the navigation settings menu, the "Start route guidance" menu item will be replaced by the "Calculate routes" menu item. 1. Enter an address.2. Select "Calculate routes" to start the route guidance.The possible alternative routes are displayed.3. Choose the desired route for the calculation by selecting it.4. Select "Start route guidance" to start the route guidance.List of previous destinationsThis list automatically stores the previous 100 destinations for which you started route guidance.Points of interest are indicated by icons.You can call up, edit, and store the destinations for a new route guidance session.Entering an address for a new route guidance session from the list1. Press the f button.2. Select "Previous destinations".The list of previous destinations is opened.3. Select the desired destination.4. Select "Start route guidance" to start the route guidance.Point of interestTo find out more, please refer to the section "Points of interest" on page 131.Geo. coordinatesTo find out more, please refer to the section "Destination input using geographical coordinates" on page 138.Point positioningTo find out more, please refer to the section "Inserting a destination from the map (point positioning)" on page 137.

NAVI 127Displaying the location of a destination1. Press the f button.2. Select "Previous destinations".The list of previous destinations is opened.3. Select the desired destination.4. Select "Details".The location of the chosen destination is shown in the map display. To find out more, please refer to the section "Map display" on page 146 .5. Select "Start route guidance" to start the route guidance if necessary.Editing the address of a destination1. Press the f button.2. Select "Previous destinations".The list of previous destinations is opened.3. Select the desired destination.4. Select "Edit" > "Address".The address entry menu is opened.5. Make the desired changes.Deleting a destination1. Press the f button.2. Select "Previous destinations".The list of previous destinations is opened.3. Select the desired destination.4. Select "Edit" > "Delete".Deleting a destination from the list 5. Confirm the message that appears by selecting "Yes".The chosen destination is deleted from the list.Deleting the entire list5. Select "Delete list" > "Delete all".The entire list is deleted.Storing a destination in the personal destination memoryStoring of destinations in the list of previous destinations takes place automatically. If all the memory locations are full, the PCM automatically deletes the oldest entry from the list.If you wish to keep a destination permanently available, you can store it in your personal destination memory under a name of your choice.1. Press the f button.2. Select "Previous destinations".The list of previous destinations is opened.3. Select the desired destination.4. Select "Store".The input menu is opened.5. Enter the desired destination name and confirm by selecting "OK".The destination is stored in the personal destination memory.

128 NAVICalling the destinationYou can call points of interest for which a telephone number has been stored in the database from the list of previous destinations. This menu item is not available if there is no telephone number stored in the database for a point of interest or if the telephone function is not available.1. Press the f button.2. Select "Previous destinations".The list of previous destinations is opened.3. Select the desired destination.4. Select "Call".The number stored in the database is dialed.Personal destination memoryIn your personal destination memory you can store 100 destination entries as well as 15 off-road navigation routes (traces) under freely defined names. The personal destination memory also contains the two personal destinations "GO HOME" and "GO TO OFFICE" that can be assigned the corresponding addresses and are always displayed at the top of the list. Points of interest are indicated by icons.Storing an address for personal destinationsHere is an example of how to enter the address for the personal destination "GO HOME":1. Press the f button.2. Select "Stored destinations".The personal destination memory is opened.3. Select "GO HOME".4. Confirm the message that appears with "Yes".POITo find out more, please refer to the section "Points of interest" on page 131.Geo. coordinatesTo find out more, please refer to the section "Destination input using geographical coordinates" on page 138.Point positioningTo find out more, please refer to the section "Inserting a destination from the map (point positioning)" on page 137.Stopovers (tour)To find out more, please refer to the section "Stopovers (tour)" on page 136.TraceTo find out more, please refer to the section "Off-road navigation" on page 139.List of landmarksTo find out more, please refer to the section "Off-road navigation" on page 139.

NAVI 129Storing an address by entering it5. Select "Enter address".6. Select "Country" if necessary and select the desired country in the list.7. Select the "Town/zip code" and "Street/no." menu items one after the other and enter the appropriate details in the input menu.8. Select "Accept" to store the entered address for the entry.Inserting an address from a list5. Select "Previous destinations" or "Stored destinations".6. Select the desired address in the list.The address is accepted.Inserting an address from a search for points of interest5. Select “POI“.For further informations please refer to the section "Points of interest" on page 131.Entering an address for route guidance from the list1. Press the f button.2. Select "Stored destinations".The personal destination memory is opened.3. Select the desired destination.4. Select "Start route guidance" to start the route guidance.Displaying the location of a destination1. Press the f button.2. Select "Stored destinations".The personal destination memory is opened.3. Select the desired destination.4. Select "Details".The location of the chosen destination is shown in the map display. To find out more, please refer to the section "Map display" on page 146 .5. Select "Start route guidance" to start the route guidance if necessary.Editing the address of a destination1. Press the f button.2. Select "Stored destinations".The personal destination memory is opened.3. Select the desired destination.4. Select "Edit" > "Address".The address entry menu is opened.5. Make the desired changes.6. Select "Accept".The old data is overwritten. Entering/editing a telephone number for a destination in the destination memoryIn the personal destination memory you can create a telephone number for each destination for standard navigation.You cannot enter or edit a telephone number if the desired destination is a trace or a point of interest (destinations for off-road navigation).

130 NAVI1. Press the f button.2. Select "Stored destinations".The personal destination memory is opened.3. Select the desired destination.4. Select "Edit" > "Telephone number".The input menu for telephone numbers is opened.5. Enter the desired number and confirm by selecting "OK".Editing the destination nameThe two personal destinations "GO HOME" and "GO TO OFFICE" cannot be renamed.1. Press the f button.2. Select "Stored destinations".The personal destination memory is opened.3. Select the desired destination.4. Select "Edit" > "Destination name".The input menu is opened.5. Make the desired change and confirm by selecting "OK".Calling the destinationYou can store a telephone number for destinations held in the personal destination memory. This menu item is not available if the telephone function is not available or if you have not stored a telephone number for the destination.1. Press the f button.2. Select "Stored destinations".The personal destination memory is opened.3. Select the desired destination.4. Select "Call".The number stored in the database is dialed.Telephone numbers are also stored for the points of interest held on the hard drive. If, for example, you select a point of interest in the map display, you can establish a telephone connection by selecting "Call" in the detailed view of the map display. To find out more, please also refer to the section "Searching for points of interest in the map display" on page 133.Sending a destinationYou can send individual destinations from the personal destination memory as a text message or.1. Press the f button.2. Select "Stored destinations".The personal destination memory is opened.3. Select the desired destination.4. Select "Edit" > "Send".Sending a destination as a text message 5. If you choose "via SMS", you must enter the telephone number of the recipient in the input menu that appears.You can also select the number from the phonebook by selecting the corresponding menu item. To find out more, please refer to the section "Creating and sending a new text message" on page 76.

NAVI 131Sending a destination via the Bluetooth®interfacePlease note that the radio connection between the two devices must be activated for data transfer using Bluetooth®. To find out how to activate this radio connection, please refer to the section "Switching Bluetooth on" on page 51.You will only be able to access the "to USB" transfer method if there is a USB memory stick connected to the USB interface. To find out more about the permissible USB memory media, please refer to the section "Notes on the media supported" on page 42.5. Select "to Bluetooth".6. The list of known devices that are suitable for a transfer is displayed. If the desired device is not there, you can search for further devices. To do this, press "New device" (see also the section "Adding a new Bluetooth device" on page 61). 7. Sign on the desired device.Deleting a destination1. Press the f button.2. Select "Stored destinations".The personal destination memory is opened.3. Select the desired destination.4. Select "Edit" > "Delete".Deleting a destination from the list 5. Confirm the message that appears by selecting "Yes".The chosen destination is deleted from the list.Deleting the entire list5. Select "Delete list" > "Delete all".The entire personal destination memory is deleted. This deletion operation also affects the two personal destinations "GO HOME" and "GO TO OFFICE".Points of interestPoints of interest are gas stations, parking structures, restaurants, hotels, or hospitals, for example.They are divided into different categories to make them easier for you to find.This function is also available in reduced form in the i menu of the map display under the "Search POI" menu item.Searching for points of interest by category1. Press the f button.2. Select "POI" > "Category".A list of the available categories is opened.3. Select the desired category from the list.A list containing the subcategories is opened.4. Select the desired subcategory.

132 NAVI5. You can also restrict the search area, if required, after selecting "Search radius":–"Nearby"The search is performed in the vicinity of the current location.–"Near destination"The search is performed in the vicinity of the currently active destination. –"Along route"The search is performed along the calculated route.–"Free location input"The search is performed in a user-defined location. You can enter this location in the input menu.The "Near destination" and "Along route" menu items are only available during an active route guidance session after the route has been calculated.6. Select the desired search area.7. Start the search by selecting "Show results".A list containing the search result is displayed. If you chose "Free location input" as the search area, the list is displayed in alphabetical order.In all other cases the list is sorted according to how far away the points of interest are. The "Nearby" and "Near destination" search areas show the distance show the distance in a straight line (independent of the actual road route), while "Along route" shows the actual distance. You can set alphabetical sorting for the "Near destination" search area at any time by selecting the first list entry, "Alphabetical list".8. Select the desired point of interest.Searching for points of interest by name1. Press the f button.2. Select "POI".3. Specify the "Category" and "Search radius" if necessary.4. Select "Name".The input menu is opened.5. Enter the first letters of the name of the point of interest. After you enter the first letters of the name, a list containing possible matches is opened.If there are fewer than five points of interest stored for the selected category and search area, a list of the points of interest is opened instead of the input menu.6. Select the desired point of interest in the list.Searching for points of interest by telephone number1. Press the f button.2. Select "POI".3. Select "Telephone number".The input menu is opened.4. Enter the telephone number with national dialing code and confirm by selecting "OK".If there is more than one address stored for the telephone number you have just entered, a list of the addresses is opened.5. Select the desired address if necessary.

NAVI 133Searching for points of interest in the map display1. Touch the map display.A crosshair is displayed.2. Briefly touch the icon for the point of interest in the map display.An orange-colored ring appears around the point of interest and the name of the point of interest and the "Details" menu are displayed in the header.3. Open the detailed view by pressing the right rotary knob u or by touching "Details" in the header.You can also view the details for a traffic message or destination flag shown on the display by touching them.Starting navigation to the point of interest1. Press the f button.2. Select "POI".Or: Touch the map display.3. Select the desired point of interest.4. Select "Start route guidance".The route is calculated and route guidance started.Changing options for route guidanceThe options for route guidance are also available to you in the map display.Setting a detourTo be able to set a detour, you must have activated the route guidance component of your navigation system.If you set a number of detours, they always refer to the current route. Older route calculations are discarded.Making a detour around route sectionsThe list of route sections shows the individual sections of the calculated route. The section you are currently driving on is at the top of the list.1. Press the f button.2. Press the i button or touch the tab of the same name in the header.

134 NAVI3. Select "Route options"> "Detour"> "Route sections".The list of route sections is displayed.4. Select the desired route section.A list containing the parts of this route section is displayed.5. Select the parts to activate ( ) or deactivate () them.6. Press the Back button h or the f button to activate the detour.7. The detour is then set. This is indicated by the icon before the "Route sections" menu item.Setting a detour from the current position1. Press the f button.2. Press the i button or touch the tab of the same name in the header.3. Select "Route options""Detour"> "Distance ahead".The map display is opened. You can see your current position as well as the route ahead.4. Switch from one part of the route section to the next by selecting the two symbols and or by turning the right rotary knob t.5. Select "Detour" once you have set the part of the route up to where you wish to activate a detour.The new route is recalculated. The icon is displayed before the "Distance ahead" menu item.Setting an alternative route1. Press the f button.2. Press the i button or touch the tab of the same name in the header.3. Select "Route options"> "Detour"> "Showing alt. routes".The map display is opened. You can see your current route. The current route guidance session is aborted.4. You can show alternative route suggestions in the map display by selecting "Route 1", "Route 2", or "Route 3".5. Select "Start route guidance" to accept one of these routes after highlighting it.

NAVI 135Canceling a blockYou cancel all previously set detours by selecting "Cancel block".The icon is no longer displayed and a new route is calculated.1. Press the f button.2. Press the i button or touch the tab of the same name in the header.3. Select "Route options"> "Detour"> "Cancel block".All blocks are canceled.Setting a short/quick routeThese two route options allow you to influence how the route is calculated.You can set or change the route options before the route is calculated or during route guidance.1. Press the f button.2. Press the i button or touch the tab of the same name in the header.3. Select "Route options".4. Activate or deactivate the desired route option by selecting it.–Short routeCalculates the shortest route to the destination.–Quick routeCalculates the fastest route to the destination.Setting dynamic route planning (XM NavTraffic)If you have activated dynamic route planning, the traffic messages broadcast by the provider XM Satellite Radio are taken into consideration when calculating the route.To find out more about traffic messages, please refer to the section "Displaying traffic messages (XM NavTraffic)" on page 98.1. Press the f button.2. Press the i button or touch the tab of the same name in the header.3. Select "Route options".4. Select "Dynamic reroute" to activate ( ) or deactivate ( ) the function.Avoiding a stretch of roadSelecting "Avoid" allows you to set restrictions for route planning. If a restriction is activated ( ), the PCM calculates a route without this type of road.If route planning is not possible with the restriction you have set, you are informed of this in an appropriate message.1. Press the f button.2. Press the i button or touch the tab of the same name in the header.3. Select "Route options" > "Avoid".The following menu items are then available for you to select:–"Toll",–"Freeway",–"Ferry / Car train", and –"Tunnel".4. Select the respective menu items to activate ( ) or deactivate ( ) the function.The route is recalculated.

136 NAVIStopovers (tour)You can enter up to four stopovers during an active navigation session and arrange them in any order. The route is recalculated and the destinations are then called at in a so-called tour.As soon as a stopover is approached as an active destination, it is also displayed in the list of previous destinations.The complete tour is displayed in the form of a list of destinations, with the currently active destination at the top of the list. The main destination of the tour is indicated by a black and white destination flag and is the last entry in the list.If the active navigation session is an off-road session, the "Stopovers" and "As stopover" menu items are replaced with the "List of landmarks" and "As landmark" menu items.To find out more about off-road navigation, please refer to the section "Off-road navigation" on page 139.Displaying destinations1. Press the f button.2. Press the i button or touch the tab of the same name in the header.3. Select "Stopovers" > "Show destination list".The destination list is opened. Entering stopovers By entering an address1. Press the f button.2. Press the i button or touch the tab of the same name in the header.3. Select "Stopovers" > "Add" > "Enter address".The address input menu is opened.4. Enter the desired address.5. Select "Accept". If you have already entered at least one stopover, a destination list is opened where you can define the position of the stopover you are in the process of entering.6. Position the stopover by selecting the "empty" list entry at the desired position in the list.From the destination memory1. Press the f button.2. Press the i button or touch the tab of the same name in the header.3. Select "Stopovers" > "Add" > "Stored destinations".The personal destination memory is opened.4. Select the desired destination.The destination is accepted as a stopover.From the list of previous destinations1. Press the f button.2. Press the i button or touch the tab of the same name in the header.3. Select "Stopovers" > "Add" > "Previous destinations".The list of previous destinations is opened.4. Select the desired destination.The destination is accepted as a stopover.

NAVI 137Inserting a destination from the map (point positioning)1. Touch the map display when route guidance is underway.A crosshair is displayed.2. Touch the icon for a point of interest or any other point in the map display.The name of the point of interest or the address of the chosen point is displayed in the header.3. Open the detailed view by pressing the right rotary knob u or by touching the header.4. Select "As stopover".The chosen destination is stored in the destination list as point positioning and indicated with the icon.Reorganizing the stopovers1. Press the f button.2. Press the i button or touch the tab of the same name in the header.3. Select "Stopovers" > "Sort new".4. Select the entries in the order in which they are to be navigated.You can finish the reorganization without completing it by selecting the Back button h. The stopovers not yet reorganized are then appended in their current position to those already sorted.Once you have reorganized all the stopovers, the list is automatically closed and route guidance to the new active destination started.Deleting stopovers1. Press the f button.2. Press the i button or touch the tab of the same name in the header.3. Select "Stopovers" > "Delete".The destination list is opened.Deleting a destination from the list4. Select the destination to be deleted in the list.5. Confirm the message that appears by selecting "Yes".The destination is deleted from the list.Deleting the entire list4. Select a stopover in the list.5. Select "Delete list".6. Confirm the message that appears by selecting "Yes".The entire list apart from the main destination is deleted and route guidance is continued to the main destination.

138 NAVIDestination input using geographical coordinatesIf you know the geographical coordinates for a destination, you can use them for destination input.1. Press the f button.2. Press the i button or touch the tab of the same name in the header.3. Select "Adv. destination input" > "Geo. coordinates".An input menu is opened.4. Enter the desired geographical coordinates and confirm by selecting "OK".5. Select "Start route guidance".The route is calculated and route guidance started.

NAVI 139Off-road navigationOff-road navigation allows you to navigate in non-digitized areas (no digital map data available for this area on the hard drive).Observe the applicable regulations in the country in which you are driving. Driving a vehicle off official roads is not permissible in all countries.Off-road navigation is generally performed only with the aid of direction arrows and simple navigation announcements. Even when you are driving on a road available in the digital map data on the hard drive, route guidance is via direction arrows only.Off-road navigation works best when the vehicle is located at a significant distance (> 330 feet) from the digitized road network.Display during off-road navigationThe following information is displayed during an active off-road navigation session:– A compass display with a vehicle symbol in the center of the compass rose.– The direction to the next landmark (stopover) symbolized by an orange-colored direction arrow.– The directional deviation from the ideal route, symbolized by an orange-colored segment.– The distance as the crow flies to the next landmark (stopover).Arrival time during off-road navigationDuring off-road navigation, the arrival time displayed in the e menu among others is calculated based on an assumed average speed of approx. 22 mph.Determination of the vehicle position during off-road navigationThe vehicle position is determined with the aid of a GPS antenna and a receiver in the navigation module. GPS stands for Global Positioning System and is a satellite-assisted position tracking system. Further vehicle signals (e.g. speed) are evaluated and processed in the navigation computer to calculate the vehicle position.This enables the system to automatically correct signal changes due to wheel changes (altered tire diameter), temperature, or air pressure variations.Activating/deactivating off-road navigation1. Press the f button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET NAVI".4. Select "Off-Road" to activate ( ) or deactivate ( ) the function.Off-road navigation is automatically activated after route guidance is started to a destination in a non-digitized area.

140 NAVISafety notice for off-road navigationWhen you activate off-road navigation you are shown a notice that off-road navigation serves only to assist the driver.ûSelect "Activate „off-road“" to close this safety notice.Landmark navigationWithin the framework of landmark navigation you can – enter a destination by entering an address(> page 124),– enter a destination by specifying the geographical coordinates (> page 138),– enter a destination in the map display (> page 137),– insert a destination from the list of previous destinations(> page 126),– insert a destination from the personal destination memory (> page 128), and– enter a maximum of four stopovers, in this case called "Landmarks" (> page 136).Destinations in the digitized area can also be selected from lists and navigated to when off-road navigation is active.These destinations are then reinterpreted as off-road destinations and navigated to using landmark navigation.In the off-road navigation only single destinations are stored in the list of previous destinations.Lists of landmarks are stored in the personal destination memory.Route guidance in landmark navigationRoute guidance is by means of a compass display with the vehicle symbol in the center of the compass rose.The orange-colored direction arrow always points in the direction of the landmark currently being navigated to.The various landmarks are shown as colored flags. The angular deviation between the current direction of travel and the direction to the next landmark is shown as an orange-colored segment and displayed in degrees.

NAVI 141Map display in landmark navigationThe individual landmarks are shown as flags in the map display:– Orange-colored flags: next landmark– Blue flags: landmarks that have not yet been driven to – Checked flag: the current destination landmark.The routes between the landmarks are shown with a blue line.Additionally, a compass is displayed at the top left to aid orientation.When a landmark is reached, the system outputs the message "Landmark XX reached".Recording a trip section (trace)With off-road navigation you can record a section of a trip, even in undigitized areas. You do this by setting navigation points. A section of this type is called a trace.Traces can be recorded in off-road mode while route guidance is active.The maximum number of traces that you can record and store in the destination memory is 15.Traces are not stored in the list of previous destinations.Map display during trace recordingDuring trace recording, the recorded route of the trace is shown as a blue line in the map display.Map display when following a traceWhen you drive a recorded trace, the route ahead is shown in the map in orange and the route already covered is shown in gray.

142 NAVIStarting recording1. When off-road navigation is activated, press the g button.2. Press the i button or touch the tab of the same name in the header.3. Select "Record trace".4. Select "From start point" if you wish to start recording from the start of the journey. Trace recording is continued, starting from the current point. The data automatically stored from the beginning of the journey is transferred.- or - Select "From current position" if you wish to start recording from the current position. The data automatically stored from the beginning of the journey is deleted.If you terminate the trace during recording, delete the trace, or change the grid for setting the navigation points, you will only be able to record a new trace using the "From current position" setting.Ending trace recording1. Press the g button while recording is underway.2. Press the i button or touch the tab of the same name in the header.3. Select "End trace".Saving a recordingAs soon as you end a trace recording you are asked whether this trace should be saved in the destination memory.1. Confirm the message that appears by selecting "Yes".2. The input menu is opened. A suggestion for a name is already provided in the input field.3. Change the suggested name as required and confirm your entry by selecting "OK".Setting the grid for setting the navigation pointsYou can set the intervals at which the so-called navigation points are set during trace recording.–"Optimized"The navigation system automatically generates a navigation point at geometrically practical locations in order to record the trace.The number of navigation points set by the system depends on the frequency of the changes in direction.–"Set ... mls"Here you define at what point in the driven route a navigation point is to be set during trace recording. The navigation points are set regardless of any changes in direction. Up to 1,000 navigation points per trace are set during recording. The setting chosen when setting the points determines the maximum route that can be recorded. The remaining memory for the active recording is displayed in the map.

NAVI 1431. When off-road navigation is switched on, press the f button.2. Press the i button or touch the tab of the same name in the header.3. Select "Off-road settings".4. Select "Recording mode".5. Set the desired grid by selecting it.When off-road navigation is switched on, this function is also available in the i menu of the map display after selecting „Record trace“.Tracing a routeYou have various options when tracing routes, based on the trace direction ("Trace forwards" and "Trace backwards") and trace point ("From start point" and "From current position"):– From start point, trace forwards: You are directed to the start point of the recording and drive the trace from the start point to the end point.– From start point, trace backwards: You are directed to the end point of the recording and drive the trace from the end point to the start point.– From current position, trace forwards: You are directed to the closest point in the trace and drive the trace in the direction of the end point.– From current position, trace backwards: You are directed to the closest point in the trace and drive the trace in the direction of the start point.After starting navigation, you are navigated to the next navigation point. Route guidance is by means of a compass display with the vehicle symbol in the center of the compass rose.The orange-colored direction arrow points in the direction of navigation point currently being navigated to. The angular deviation between the current direction of travel and the direction to the next navigation point is shown as an orange-colored segment. The angular deviation is indicated in degrees.1. Press the f button.2. Select "Stored destinations".The personal destination memory is opened.3. Select the desired trace in the list.4. Select "Start route guidance".If off-road navigation is not yet activated, the safety notice is displayed. 5. Confirm the safety notice with "Activate „off-road“" if applicable to activate off-road navigation.6. Select the desired direction of travel and start point along the route to be driven.Route guidance is started.

144 NAVIStoringThis menu item allows you to store both a destination and your current position.You can also access this function in the i menu in the map display.Storing a destinationIf route guidance is currently active, you can store either the destination or the entire route depending on the type of route guidance in your personal destination memory. The menu item provided here is tailored to the respective situation.The following options are available:–"Store destination"is displayed during route guidance to an address, a geographical coordinate, or a point of interest.–"Store tour"is displayed during route guidance to a stopover or to the main destination in a tour.–"Store landmarks"is displayed when off-road navigation is active when tracing a landmark navigation session.1. Press the f button.2. Press the i button or touch the tab of the same name in the header.3. Select "Store".4. Select the menu item shown (e.g. "Store destination").The input menu is opened.5. Enter the desired name by selecting the individual letters in the input menu and confirm your entry by pressing "OK". Storing a positionYou can store your current position as a geographical coordinate in your personal destination memory by selecting "Store position".1. Press the f button.2. Press the i button or touch the tab of the same name in the header.3. Select "Store".4. Select "Store position".The input menu is opened.5. Enter the desired name by selecting the individual letters in the input menu and confirm your entry by pressing "OK".

MAP 145MAPMap display .............................................. 146Changing the scale of the map.................. 146Moving the map....................................... 147Setting the intersection zoom ................... 147Setting the display of the total route.......... 147Setting autozoom .................................... 147Setting the map to a northerly orientation .................................. 147Displaying the Destination town/Location info.................. 148Displaying sections of the route ................ 148Setting the display layout ......................... 148Compiling map contents........................... 149

146 MAPMap displayYou call up the map display of the navigation system by pressing the g button.Your vehicle is shown in the map display as a triangular arrow. The arrowhead points in the direction of travel. The center of the vehicle is represented by the black dot in the middle of the small triangle.The recommended travel route, streets, rivers, railroad tracks, wooded areas, or lakes are displayed as colored lines or areas. Smaller icons indicate points of interest like hotels, gas stations etc. The detail depends on the map scale set.Route guidance continues through voice announcements.When route guidance is active, either the expected time of arrival or the remaining trip time in hours as well as the distance to the destination is displayed at the bottom of the display. You can switch back and forth between the two options by briefly touching the display. If the XM NavTraffic Service of XM Satellite Radio is enabled, road sections with high traffic volumes causing congestion will be displayed in a different color.– Red colored lineEstimated average speed on red colored street sections below 10 mph.– Yellow colored lineEstimated average speed on yellow colored street sections below 30 mph.– Green colored lineEstimated average speed on green colored street sections below 50 mph.You can choose for yourself the content shown in the map display. For more information, please refer to the section "Compiling map contents" on page 149.Changing the scale of the mapThe current scale is shown in the bottom right of the map in the map display.ûSet the desired map scale by turning the right rotary knob t.A number of map views also display the two symbols and .ûChange the desired map scale by touching the two symbols on the display.

MAP 147Moving the mapYou can move the map section shown on the display as required. You have two options for doing this:ûBriefly touch the display to move the map section so that the center point of the map is at the point you touched.- or -ûTouch and hold a point in the map display to keep moving the map in the direction of this point. The map will keep moving until you stop touching the screen.Setting the intersection zoomIf you have activated this function, the upcoming driving maneuver (e.g. leaving the freeway) is displayed greatly enlarged during route guidance.The map is aligned during intersection zooming so that the current driving maneuver is "in front of the vehicle", i.e. shown in the center of the top half of the display.1. Press the g button.2. Call up the map display menu by pressing the right rotary knob r.3. Select "Intersection zoom" to activate ( ) or deactivate ( ) the function.Setting the display of the total routeIf you have activated this function, the total route from the vehicle position to the destination flag is displayed during route guidance.The map scale is automatically adapted. 1. Press the g button.2. Call up the map display menu by pressing the right rotary knob r.3. Select "Total route" to activate ( ) or deactivate ( ) the function.Setting autozoomIf you have activated this function, the entire current route section is displayed. As soon as you leave the current route section, the next route section is displayed in the map. The map scale is calculated and adapted according to the length of the new route section.1. Press the g button.2. Call up the map display menu by pressing the right rotary knob r.3. Select "Autozoom" to activate ( ) or deactivate ( ) the function.These functions can also be activated or deactivated in the map display menu.To find out more, please also refer to the section "Setting zoom functions" on page 149.Setting the map to a northerly orientationIf you have activated the "North orientation" function, the map will be oriented to the north.ûTouch the north arrow on the display.- or - 1. Press the g button.2. Call up the map display menu by pressing the right rotary knob r.3. Select "North orientation" to activate ( ) or deactivate ( ) the function.The function can also be activated or deactivated in the map content menu.To find out more, please also refer to the section "Compiling the map information" on page 149.

148 MAPDisplaying the Destination town/Location infoWhen route guidance is active, selecting the "Show destination" or "Show location" function displays the relevant position in accordance with the zoom functions currently active.1. Press the g button.2. Call up the map display menu by pressing the right rotary knob r.3. Select "Show destination".The destination town is displayed on the map.4. Select "Show location" if applicable.The location is displayed on the in a northward direction aligned map.Displaying sections of the routeIf you have started the route guidance component of your navigation system, a list containing all sections of your route will be displayed. 1. Press the g button.2. Press the i button or touch the tab of the same name in the header.3. Select "Route list".The sections of your route are listed and displayed.The section you are currently driving on is at the very top of this list and the final destination is at the very bottom.4. Select the desired section for a more detailed view.You then see a map section showing the route section in question.5. You can change the map scale if necessary by selecting the two symbols and and browse the various sections by selecting the symbols and .6. If you would like to make a detour around this section of your route, select "Detour".To find out more about setting detours, please refer to the section "Setting a detour" on page 133.This function is also available under the "Route list" menu item in the d menu.If off-road navigation is activated, a restricted version of this function is available with so-called landmark navigation.Setting the display layoutYou have four options for dividing the display while route guidance is active:–"Full screen map"The map is shown across the entire display.–"With guidance"In addition to the relevant map section, the next driving instruction is shown in the right half of the display.–"With maneuver list"In addition to the relevant map section, the next maneuver is shown with the help of pictograms.–"With route preview"In addition to the map section containing the current position, a further map section containing the route ahead is shown.1. Press the g button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET MAP" > "Map layout".The various options for the display layout are shown.4. Select the desired layout.The chosen layout is set.

MAP 149Switching between different layoutsûIf you choose the "With guidance" layout, you can switch to the full-screen map by briefly touching the display. The driving instructions are then shown in a small window in the top left corner of the display.ûIn the "Full screen map" layout, you can switch to the split screen layout with the driving instructions by briefly touching the so-called mini driving instructions in the top left corner.Compiling map contentsYou can adapt the map display to your requirements by selecting various elements and settings.Compiling the map information1. Press the g button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET MAP" > "Map view".The following map display criteria are then available to you:–"North orientation", –"3D map" (perspective display), –"Guidance", –"Traffic messages", –"North arrow", –"Show footer", and –"Footprints".4. Select the various list items to activate () or deactivate ( ) them in the map display.The map display is adapted in accordance with your settings.Compiling the points of interest to be displayed1. Press the g button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET MAP" > "Show POIs".The list containing the various point of interest categories is displayed.4. Select the desired point of interest category.The list containing the associated subcategories is displayed.5. Select the various subcategories to activate ( ) or deactivate ( ) them in the map display.The map display is adapted in accordance with your settings.Setting zoom functions1. Press the g button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET MAP" > "Zoom functions".The list containing the various selection options is displayed.4. Select the various list items to activate () or deactivate ( ) them for the map display.The map display is adapted in accordance with your settings.

150 Voice ControlVoice ControlLearning about voice control....................... 151Introduction to operation...........................151Speech intelligibility ..................................152Symbols in sample dialogs........................ 152Commands ..............................................153Voice entries............................................154Basic functions of thevoice control system.................................. 154Activating voice control.............................154Deactivating voice control .........................155Setting the volume ...................................155Setting the language................................. 155Configuring the voice control system .........155Performing voice adaptation......................156Using the help function .............................157Operating lists using voice control .............157Operating examples ................................... 158Operating example for radio mode.............158Operating example for CD/DVD mode........161Operating example for telephone mode...... 162Operating example for navigation mode ..... 166

Voice Control 151Learning about voice controlPlease refer to the notes on operation and road safety on page 6. The PCM is fully voice controllable (with the exception of the functions in the e and b menus as well as the various SET menus).The voice control system is designed so that you can generally say each menu item shown on the display. Exceptions are indicated by an appropriate message on the display of the PCM. Introduction to operationThe voice control system is activated by pressing the button on the Operating Lever for on-board computer (sports car) or on the stalk for the turn signal, high beam, and headlamp flasher (Cayenne) (please refer to the section "Activating voice control" on page 154). This allows you to operate the PCM without taking your hands from the wheel.In addition, the voice adaptation function is explained on page 156. This function allows you to individually adapt the voice control system to your voice.How voice control worksThe voice control system recognizes commands or numerical sequences regardless of the respective speaker. It provides acoustic feedback and guides you through the functions.Operating errors and canceling dialogsIf you give a command that is either incorrect or does not exist, the voice control system responds with the query "Could you repeat that?", after which you can say the command again. After the second failed attempt, the PCM offers you help. After the third failed attempt, the PCM aborts and terminates the dialog with the announcement "End".You have the following options for terminating voice control during a dialog:ûSay the "stop", "quit", "terminate", "end", or "End" commands if the voice control system is awaiting a command.ûPress any button on the PCM.The PCM then executes the function corresponding to the pressed button.The only exception to this is the volume control. During Voice Control, you can only use this button to adapt the volume of the announcements, not to terminate a dialog.Functions of the button on the Operating Lever for on-board computer (sports car) or on the stalk for the turn signal, high beam, and headlamp flasher (Cayenne) By pressing the button on the Operating Lever for on-board computer (sports car) or on the stalk for the turn signal, high beam, and headlamp flasher (Cayenne) you can: – terminate a voice control announcement while it is in progress,– skip to the next part of the announcement in the case of announcements with multiple parts,– manually cancel a dialog.The button has no function during a telephone call.

152 Voice ControlSpeech intelligibilityTo make it easier for your voice control system to understand your commands, please note the following points:– The hands-free microphone is aimed at the driver's seat. The voice control system should therefore be operated by the driver. – Do not speak while the voice control system is making an announcement.– Speak without interruptions and at a normal volume. Avoid long pauses and excessive emphasis.– Reduce background noise by closing the windows, doors, and sunroof.– While giving voice commands, avoid other noise in the vehicle (e.g. passengers speaking among themselves).Symbols in sample dialogsA number of the voice commands initiate dialogs between you and the voice control system. A few of these dialogs are presented in the operating manual as examples.The following symbols are used in these sample dialogs:Symbol y This symbol identifies a voice command that you say.Symbol ; This symbol identifies an announcement made by the PCM.Symbol  This symbol identifies something shown on the PCM display.Symbol BeepÒThis symbol identifies the audible signal that sounds as soon as the PCM is ready to accept a command.WARNING!Accident hazard. Since stressful situations can cause your voice to change, it may happen that a desired telephone connection is not established quickly enough.ûDo not use the voice control system to operate the telephone in cases of emergency.For safety reasons, an emergency call can only be initiated directly on the device.

Voice Control 153CommandsThe commands supported by the voice control system are divided into two categories:Local commands You can only say local commands within the respective main function. They are not listed here since they include all menu items shown on the display. The only exceptions are the e and b menus as well as the various SET menus. These are not voice controllable.The voice control system for lists is different and is described in the section "Operating lists using voice control" on page 157.Global commands You can say global commands from any function. They include: – the main functions of your PCM, – selected shortcuts (branching directly to a function without opening the respective main function beforehand) as well as – the various help topics.Global commands for the voice-controlled main functions:–Tuner, Radio–Disc, CD – Phone, Telephone– Info, Information–Navi, Navigation–Map, Global commands for the non-voice-controlled main functions:– Source, Sources– Sound– Trip, Trip computerGlobal commands from the telephone area:–call, dial– call name, make call to name– Dial numberGlobal commands from the navigation area:– go to destination, go to destination ...*– start route guidance–stop route guidance– input country– input town– input street– input intersection–go home– go to office–next ATM–next hotel–next restaurant– next gas stationGlobal commands for the help function:–help–help voice control– help devices–help source–help tuner – help disc – help phone –help info–help navi –help map – help optionOther global commands:– stop, quit, terminate, end, and cancel–back

154 Voice ControlVoice entries You can assign so-called voice entries for entries in the phonebook as well as for destinations in your personal destination memory. These voice entries are intended to make it easier for you to call up people or places with difficult to understand (e.g. foreign) names.You can assign 20 voice entries each for the phonebook and destination memory.Please note that the recognition of the voice entries depends on the language currently selected for the voice control system. Always, therefore, use the language that you wish to use for voice control when creating the voice entries.If you change the language, the system may no longer reliably recognize the voice entries that you have trained it to recognize in another language. Basic functions of the voice control systemActivating voice controlYou cannot activate the voice control system while you are on a telephone call.1. Switch on the ignition and the PCM.2. Press the button on the end of the Operating Lever for on-board computer (sports car) or on the stalk for the turn signal, high beam, and headlamp flasher (Cayenne).An audible signal sounds after a short time, the voice control system is activated and awaits a spoken command. If you do not say a command, the voice control system prompts you to say something with the announcement "Could you repeat that?".As soon as the voice control system is activated, you will see one of the following two symbols in the top right corner of the display: – = The voice control system is awaiting a spoken command.– = The voice control system is currently making an announcement. Sports car Cayenne

Voice Control 155Deactivating voice controlYou can deactivate the voice control system as follows:ûPress the button on the Operating Lever for on-board computer (sports car) or on the stalk for the turn signal, high beam, and headlamp flasher (Cayenne).- or -ûSay the "stop", "quit", "terminate", "end", or "cancel" commands if the voice control system is awaiting a command.After you deactivate the system, you hear the announcement "End" in confirmation and the voice control system then switches off.Setting the volumeYou can change the volume of the voice control system announcements to compensate for changes in the ambient noise during the journey, for example.1. Activate the voice control system and say a command such as "help", for example.2. Turn the volume control on your device during an announcement to raise or lower the volume of the announcement. The volume of the voice control system announcements is independent of that of the telephone and audio system.Setting the language The voice control system recognizes various languages. When you change the language, it affects the voice input by the user, the voice output by the PCM, and the language shown on the display.1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PCM system"> "Regional settings" > "Language".4. Select the desired language.The corresponding language is set.Configuring the voice control systemYou can configure how you interact with the voice control system in just a few steps.1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PCM system">"Voice control".

156 Voice ControlThe following options are then available for you to select:–"Repeat" The voice control system repeats all recognized commands. You can switch off this repetition. Switching it off makes using the voice control system faster but this comes at the price of not knowing whether the voice control system has correctly recognized the command given. Voice entries and digits are always repeated, even if the function is switched off.–"Quick dialog" If you switch on this function, the PCM outputs certain announcements in an abridged form. This does not change the information content of the announcements. This option is useful for experienced users.–"Show hints" This function is switched on ex-factory. If it is switched on and voice control is activated, the PCM shows you commands that are available in addition to the menu items already shown.4. Select the desired function to activate ( ) or deactivate it ( ).Performing voice adaptationThe voice adaptation function allows you to individually adapt the voice control system to your voice, thereby improving thereby improving the system's voice recognition. This does not impair the recognition of other users. Adaptation can only be performed when the vehicle is stationary. Please note the first five points in the section "Speech intelligibility" on page 152 in connection with this.Starting/canceling voice adaptation1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PCM system">"Voice control" > "Voice adaptation".4. Select "Start adaptation".Adaptation starts and commences interaction with the user.5. Follow the instructions of the PCM and repeat each command and numerical sequence after the tone.Adaptation ends automatically after the last command and the data is automatically stored.6. Select "Cancel" to cancel adaptation.In this case no data is stored.

Voice Control 157Deleting voice adaptation1. Press the d button.2. Press the i button or touch the tab of the same name in the header.3. Select "SET PCM system">"Voice control" > "Voice adaptation".4. Select "Delete adaptation".5. Select "Yes" or "No".The adaptation is deleted or not deleted depending on your selection.Using the help functionThe voice control system features an integrated help function whose commands are always available. You will find an overview of the commands in the section “Global commands”, subsection "Global commands for the help function:" on page 153.Below you will find a brief description of the most important help commands.– "help" command:When you say this command, the PCM reads out the commands available for the menu items currently shown. It also tells you the commands to use to obtain further help.– "help voice control" command: This command interactively guides you to the help you need using the available help topics and help areas.– "help devices" command: After this command, the PCM prompts you for the main function on which you need help, for example tuner or disc. You are then interactively guided to the help you need using the available help topics and help areas.– "help" command followed by a main function, for example "Disc":This command allows you to skip the step of specifying the main function for which you need help. It brings you directly to the help for a specific main function.Like the voice control system, you can also deactivate the help. To find out how to do this, please refer to the section "Deactivating voice control" on page 155.Operating lists using voice controlScrolling in a listYou can scroll in any list using the "scroll down" and "scroll up" commands.Voice-controlled listsIf you see the symbol to the right of a list entry, it means that the list is voice controllable.You have the following options for selecting a row in voice-controlled lists:ûSaying the contents as they are displayed in the row.

158 Voice Control- or - ûSay the "Line number" command, directly followed by the row number to the right of the row.Non-voice-controlled listsWith non-voice-controlled lists, you can only select a row using the row number.ûSay the "Line number" command, directly followed by the row number to the right of the row.Reading out list contentsIn voice-controlled lists you can have the list contents read out. The PCM starts with the highlighted list row and reads out the list down to the last row. ûSay the "read out" command.Operating examplesThe voice control system is designed so that you can say each menu item shown on the display. Exceptions are indicated by an appropriate message on the display of the PCM. If you have activated the "Show hints" function, the PCM also shows you the most relevant commands possible at that time as soon as you are prompted to enter a command. To find out more, please refer to the section "The following options are then available for you to select:" on page 156.Due to the large number of control options, we have chosen to provide a number of operating examples on the following pages instead of a full listing of all voice-controlled functions.Operating example for radio modeCalling up radio mode and switching wavebandûActivate voice control.;Beep Ò y"Tuner".;"Tuner". The PCM switches to radio mode if another mode was active prior to the command being entered. If radio mode was already active, the waveband is switched.Tuning to a currently receivable FM stationIf you know the currently receivable FM stations and if radio mode is your active audio source, you can tune to the desired station by saying its name.ûActivate voice control.;Beep Ò y"Station KFOG".;"Station KFOG". The PCM tunes to the corresponding station.

Voice Control 159Tuning to stored FM stations You can either say the name of a stored station from the FM main menu or the number of its memory location.ûActivate voice control.;Beep Ò y"Station KFOG".;"Station KFOG". - or - ûActivate voice control.;Beep Ò y"Station number 1".;"Station number 1". The PCM tunes to the corresponding station.Tuning to stored AM stations You can say the memory location of a stored station from the AM main menu.ûActivate voice control.;Beep Ò y"Station number 1".;"Station number 1". The PCM tunes to the corresponding station.Entering a frequencyYou can also tune to FM and AM stations by entering the frequency. The frequency input menu only accepts frequencies within the given waveband.– FM waveband: 87.9 – 107.9 MHz, with 0.5 MHz increments. – AM waveband: 530 - 1700 KHz, with 1 kHz increments.Example for entering the frequency 98.4 MHz in the FM waveband:ûActivate voice control.;Beep Ò y"Manual tune".;"Manual tune". The display switches to the frequency input menu.;"Please say the desired frequency.". Beep Ò y"Ninety-eight point four".;"Frequency Ninety-eight point four megahertz".The PCM tunes to the corresponding frequency, the frequency input menu stays open.You can also enter the frequency without the display switching to the frequency input menu using the "Frequency" command, directly followed by the desired MHz value.

160 Voice ControlStation searchYou start the search in the FM or AM waveband using the "next station" or "previous station" command. The search scans upwards or downwards and automatically stops at the next receivable station.Automatic station search (autostore)The automatic station search function fills the memory of the preset memory currently selected with the six stations with the strongest reception signal at the present time.Any stations that have already been stored (e.g. manually stored) are overwritten.This function is not available for the Best FM and MIXED preset memories.Example for entering an autostore in the preset memory FM1:ûActivate voice control.;Beep Ò y"Autostore FM1".;"Autostore FM1".The PCM starts the function.Starting/stopping the scan functionIf you activate this function, every station found in the frequency range is played for approx. 5 seconds.ûActivate voice control.;Beep Ò y"Start scan".;"Start scan". The PCM plays the stations one after the other.ûActivate voice control.;Beep Ò y"Stop scan".;"Stop scan". The PCM tunes to the station currently playing.Switching the traffic program on and offYou switch the traffic program on and off using the "activate set TP" and "deactivate set TP" commands.Tuning to stations from the station listThe station list is available in the FM waveband and contains all currently receivable stations.ûActivate voice control.;Beep Ò y"Station list".;"Station list". The station list is displayed.ûScroll in the list if necessary using the "scroll down" and "scroll up" commands until you see the desired station. The following two options are available to you for tuning to a station:y"Station KFOG.;"Station KFOG".The PCM tunes to the station KCRW.- or - y"Line number 3".;"Line 3". The PCM tunes to the corresponding station.

Voice Control 161You can also tune to a station from the station list directly without calling up the list first. You do this by saying the "Station" command, directly followed by the name of the station as it appears in the list.The station list is a voice-controlled list, to find out more about this please also refer to the section "Operating lists using voice control" on page 157.Operating example for CD/DVD modeCalling up CD/DVD modeûActivate voice control.;Beep Ò y"Disc".;"Disc". The PCM switches to disc mode.Selecting a track from the track listThe track list contains all the tracks on the CD/DVD currently being played.ûActivate voice control.;Beep Ò y"Track list".;"Track list". The track list is displayed.Selecting a track from the track list:ûScroll in the list if necessary using the "scroll down" and "scroll up" commands until you see the desired track. y"Line number 3".;"Line 3". The PCM plays the corresponding track.If the disc currently playing is an MP3-CD/DVD, the track list shows the names of the root directories as well as the subdirectories. You also select folders and playlists using the "Line number" command, directly followed by the corresponding number.The track list is a non-voice-controlled list, to find out more about this please also refer to the section "Operating lists using voice control" on page 157.Choosing a track by skipping tracksYou skip to the previous track or the next track using the "previous track" and "next track" commands.Choosing a track by entering the track numberIn CD/DVD mode you select a track directly using the "track number" command, directly followed by the corresponding number.

162 Voice ControlChoosing a disc from the disc listThe disc list contains all available CDs/DVDs.ûActivate voice control.;Beep Ò y"Disc selection".;"Disc selection". The disc list is displayed.;"Please say the number of the required disc". y"Disc number 3".;"Disc number 3". The PCM plays the corresponding CD/DVD.The disc list is a non-voice-controlled list, to find out more about this please also refer to the section "Operating lists using voice control" on page 157.Choosing a CD/DVD by entering the disc numberYou select a specific disc directly using the "disc number" command, directly followed by the corresponding number.Repeating a trackWhen this function is activated, the current track or the current chapter (Video-DVD mode) is repeated. You switch the repeat function on and off using the "activate repeat" and "deactivate repeat" commands. Switching the shuffle function on and offWhen this function is activated, the PCM plays the tracks on the disc currently playing in random order.You activate and deactivate the shuffle function using the "activate repeat" and "deactivate shuffle" commands.Track scan functionWhen this function is activated, the PCM plays a brief snippet of each track on the disc currently playing one after the other and then skips to the next track.You start and stop the scan function using the "Start scan" and "Stop scan" commands. Operating example for telephone modeWARNING!Accident hazard. In emergency situations, stress may cause your voice to change to an extent where it might take longer than normal to establish a telephone connection.ûDo not use the voice control system in cases of emergency. Injury hazard. The telephone must not be used near explosives or flammable materials (e.g. at a gas station) or near operations involving explosives.Cell phones must be switched off in certain hazardous areas such as near gas stations, fuel depots, chemical plants, and demolition work in progress using explosives, for example. The electric spark from the cell phone could ignite chemical vapors near these hazardous areas, which could result in serious personal injury or death.ûFollow corresponding instructions.ûObserve statutory regulations and local restrictions when using the telephone.

Voice Control 163Calling up telephone modeûActivate voice control.;Beep Ò y"Telephone".;"Telephone". The PCM switches to telephone mode.If you have not yet entered the PIN, the PCM now prompts you to do so.Entering the PINThe digits "zero" to "nine" are permitted when entering the PIN. The following two options are available to you when saying the digits:– Say all digits in a single block without a pause.– Group and say the individual digits in blocks, for example the first three digits and then the next three digits. Leave a pause after each block and wait until the PCM has repeated the digits from the last block entered before saying the next block.If you are saying the digits in blocks, you can delete the last block using the "Correction" command. The PCM then repeats the last correct block and you can continue with your input. The "delete" command deletes all your input.If you are saying all the digits without a pause, both these commands delete all the input.ûActivate voice control in the PIN input menu (see above).;"PIN?". Beep Ò y"One Two Three Four".;"One Two Three Four".Beep Ò y"Ok".;"Checking the PIN". The PCM switches to telephone mode if the entered PIN is correct.Entering a telephone numberThe digits "zero" to "nine" as well as the following words are permitted when entering the digits:– "Star" for the '*' character– "Hash" for the '#' character–"Plus" for the '+' characterFor overseas numbers, use the word "Plus" at the start of the telephone number followed by the national dialing code. Then enter the local area code without the first digit, and then the telephone number.The following two options are available to you when saying the telephone number:– Say all digits in a single block without a pause.– Say the telephone number in blocks, leaving a pause after each block and waiting until the PCM has repeated the digits from the last block entered before saying the next block.

164 Voice ControlIf you are saying the telephone number in blocks, you can delete the last block using the "Correction" command. The PCM then repeats the last correct block and you can continue with your input.The "delete" command deletes all your input.If you are saying all the digits without a pause, both these commands delete all the input.If you try to enter more than 32 digits, you will hear an announcement that the number is too long and that the last input has been deleted.Example for an overseas call to Germany:ûActivate voice control.;Beep Ò y"Dial number".;"Dial number."Beep Òy"Plus Four Nine".;"Plus Four Nine".Beep Ò y"Seven Two Four Eight".;"Seven Two Four Eight".Beep Ò y"Seven One Zero".;"Seven One Zero".Beep Ò y"Call number".;|Dialing the number."The PCM dials the number.The "Dial number" command is a global command, which means it also works in other modes (for example navigation mode). You will find other global commands in the section "Global commands" on page 153.Calling up the phonebookûActivate voice control.;Beep Ò y"Phonebook".;"Phonebook". The phonebook is displayed as a list.Calling a phonebook entryûScroll in the list if necessary using the "scroll down" and "scroll up" commands until you see the desired entry. The following two options are available to you for making a call to an entry:1. Say the "Call" command, directly followed by the name of the entry.This option is global and also works outside the phonebook.2. Say the "Line number" command, directly followed by the corresponding number shown to the right of the row.This option is not global and only works within the phonebook. Furthermore, unlike option 1, it does not result in direct dialing of the telephone number.

Voice Control 165If you are saying the name of a phonebook entry, please note the following:ûSay the name as normal, do not spell it out.ûIf the name of a phonebook entry is in a language other than that currently set in the PCM, the voice control system may not recognize it correctly.With phonebook entries with multiple numbers, the entry can also be directly selected by additionally speaking the category (e.g. "Mr. Smith Office"). If the specified category does not exist for this entry, the available categories are announced.Example for option 1:ûActivate voice control.;Beep Ò y"Call Information".;"Dialing the number of Information".The PCM dials the number.Example for option 2:ûActivate voice control.;Beep Ò y"Line number 3".;"Line 3". The details for the corresponding phonebook entry are displayed.ûActivate voice control.;Beep Ò y"Call number".;"Call number". "Dialing the number.".The PCM dials the number.Assigning a voice entry for an entry in the phonebookYou can store voice entries for entries in your telephone's phonebook using the "Change pronunciation" command. You can use these voice entries to make a call without having to enter the other person's number. To store a voice entry, you must first select an entry in the phonebook containing both a name and a telephone number.ûActivate voice control.;Beep Ò y"Change pronunciation".;"Change pronunciation. Please say a name." Beep Ò y"Mr. Smith".;"Please say the name a second time."Beep Ò

166 Voice Controly"Mr. Smith".;"The pronunciation Mr. Smith has been stored." The voice entry has been stored for the entry in the phonebook. You delete an existing voice entry again using the "Delete pronunciation" command.List of previous callsThe "Previous calls" menu provides you with access to a list of the telephone numbers you have recently called. You can select a list entry using voice control and call it again. ûActivate voice control.;Beep Ò y"Previous calls".;"Previous calls". The list of previous calls is displayed.To find out how to select a list entry and make a call, please refer to the section “Calling a phonebook entry” on page 164.List of received calls The "Received calls" menu provides you with access to a list of the calls you have recently received. You can select a list entry using voice control and call it back. ûActivate voice control.;Beep Ò y"Received calls".;"Received calls". The list of previous calls is displayed.To find out how to select a list entry and make a call, please refer to the section “Calling a phonebook entry” on page 164.Operating example for navigation modeCalling up navigation modeûActivate voice control.;Beep Ò y"Navigation".;"Navigation". The PCM switches to navigation mode.Entering an address and starting route guidanceIf the language set on the PCM and the language spoken at the destination are identical, you can speak the country, town and street each as complete words.If the two languages are not identical, you must spell out the letters of the town and street. This applies both to destinations in countries with multiple official languages and destinations abroad.ûActivate voice control.;Beep Ò y"Enter address".;"Enter address". "Please select the country".Beep Ò

Voice Control 167y"USA".;"USA". "Please say the town".Beep Ò y"San Francisco".;"Please say the town". Beep Ò A list of towns is displayed.ûScroll in the list if necessary using the "scroll down" and "scroll up" commands until you see the desired town.y"Line number 3".;"San Francisco". "Please say the street".Beep Ò y"Market Street".;"Please select the street". Beep Ò A list of streets is displayed.y"Line number 3".;"Market Street"."Would you like to input a street number?"Beep Ò y"Yes".;"Please say the street number one digit at a time". Beep Ò y"One Three Zero".;"One Three Zero"."Would you like to start route guidance?"Beep Ò y"Yes".The PCM calculates the route.If you have already started route guidance, the country is already preset. In this case, address entry starts with the prompt "Please say the town".If you wish to set a different country, you must start the dialog using the "input country" command.If you are unable to find the desired destination in the town or street list, you can repeat your entry by selecting the "Correction" command.Entering a destination from the list of previous destinations or from the personal destination memoryThe "Previous destinations" menu provides you with access to previous destinations for which you started a route guidance session.In the "Stored destinations" menu you will find the destinations you have stored in your personal destination memory.Both lists are voice-controlled lists, to find out more about this please also refer to the section "Operating lists using voice control" on page 157.If you wish to transfer a row to the voice control system by saying the contents, please note also the following: – You can say all other row contents as they are displayed. If the voice control system has difficulty understanding the contents, we recommend saying the number of the respective row.– Both lists can contain rows with geographical coordinates. Example: "8° 55’ 32’’ E 48° 51’ 5’’ N". You cannot select these rows by saying their contents; you must say the row number.

168 Voice Control– You can store traces in the personal destination memory. When doing so, the PCM suggests a name. You cannot select rows with these default names by saying their contents.If you name the trace yourself, however, you can select the row by saying its contents.– If you know the name of the destination, you can also start route guidance directly using the "go to destination ...*" command.ûActivate voice control.;Beep Ò y"Previous destinations".;"Previous destinations". - or - y"Stored destinations".;"Stored destinations". The list of previous destinations or the personal destination memory is displayed.ûScroll in the list if necessary using the "scroll down" and "scroll up" commands until you see the desired destination. The following two options are available to you for starting route guidance to a destination:1. Say the row contents shown on the display.2. Say the "Line number" command, directly followed by the corresponding row number shown to the right of the row.Example for option 1:ûActivate voice control.;Beep Ò y"Market Street".The details for the list entry are displayed.ûActivate voice control.;Beep Òy"Start route guidance".;"Start route guidance". The PCM calculates the route to the destination.Example for option 2:ûActivate voice control.;Beep Ò y"Line number 3".;"Line 3". ûActivate voice control.y"Start route guidance".;"Start route guidance". The PCM calculates the route to the destination.Entering points of interestThe "POI" menu provides you with access to points of interest such as gas stations, parking structures, restaurants, hotels, or hospitals, for example.The points of interest are divided into different categories to make them easier for you to find.With the voice control system, you can select a point of interest by entering the category and subcategory as well as the search area.

170 Technical DataTechnical DataRadio frequency ranges.............................. 171Tuning steps for automatic station search ............................ 171Regional codes for Video-DVDs ................... 171

Technical data 171Radio frequency rangesUSW (FM): 87.5 - 108 MHz(manual tuning in 100 KHz increments)MW (AM): 531 - 1602 KHz(manual tuning in 1 KHz increments)Tuning steps for automatic station search:USW (FM) 100 KHzMW (AM) 9 KHzRegional codes for Video-DVDsCode 1: USA, CanadaCode 2: Japan, Europe, South AfricaCode 3: South East AsiaCode 4: Australia, New Zealand, Pacific Islands, Central America, Mexico, South America, CaribbeanCode 5: India, Africa, North Korea, RussiaCode 6: ChinaCode 7: Not currently assignedCode 8: International territory such as cruise liners and airplanes, for example– "Other countries" means countries in this region not explicitly mentioned in the list– Spelling of country names subject to correction

172 GlossaryGlossary5.1 (Surround Sound 5.1)Surround Sound 5.1 refers to multi-channel sound systems with five main channels and a separate low-frequency effect channel. Unlike Dolby Surround Pro Logic and similar systems, with 5.1 all six channels are stored and played discretely, i.e. individually and fully. AAC (Advanced Audio Coding) AAC is a file format for lossy storage of audio data. The format has primarily become known thanks to its use in a number of music services, particularly Apple's iTunes®. Autostore Stores the stations with the strongest reception signal at the present time in the respective preset memory in order of reception quality. CD-Extra CD A CD-Extra CD is a special multi-session CD containing exactly two sessions. The first session contains the "normal" audio data of the CD. The second session contains the computer data. Dolby Digital (also ATSC A/52 and Dolby AC-3)Dolby Digital is a multi-channel sound system from Dolby that is used in cinema, on laser discs, DVDs, and in television. DTMF tones (Dual Tone Multi-Frequency) DTMF tones are tones stored on the keypad that are transmitted by a telephone or mobile radio equipment in order to communicate with touch tone-activated telephone systems. DTMF is used in hotline systems, in mailbox systems, and in telephone banking, for example. DTS DTS refers to a multi-channel sound system from the Californian company of the same name (Digital Theater Systems, Inc.) that is used in cinemas as well as on laser discs, DVDs, special audio CDs, and D-VHS. GPS (Global Positioning System)GPS is a satellite-assisted position tracking system. IMEI (International Mobile Equipment Identity) The IMEI is a serial number that permits unique identification of the hardware in mobile radio equipment. Since different network providers can use this number to block a telephone in the event of misuse, it is a good idea to keep a record of it. The IMEI can normally be displayed on a cell phone by keying in *#06#. Meridian Lossless Packing (also Packed PCM or Dolby Lossless) Meridian Lossless Packing is a lossless compression standard for digital sound recordings. Mixed Mode CD (also "Enhanced CD" )A Mixed Mode CD is a CD containing tracks of different types (e.g. one data track and numerous audio tracks). MP3 A generic term for MPEG-1 Audio Layer 3 (a lossy compression method for audio data).

174 GlossaryvCard A vCard is an electronic business card. It is a file containing information on a person or company. Like a business card, the vCard text can contain text elements for the characteristic data as well as graphical and multimedia elements. WMA (Windows Media Audio) WMA is a compression standard developed by Microsoft for lossy compression and decoding of audio files.

Index 175IndexNumerics5.1.......................................................................172AAAC......................................................................172AAC-LC ...................................................................34accepting a call ................................................ 53, 66accident hazard........................................................46activating alternative routes for route guidance ............125activating/deactivating checkboxes..............................12activating/deactivating radio buttons............................12activating/deactivating selection boxes.........................12adapting the map display..........................................149alternative frequencies...............................................25answer button ..........................................................10assigning a key.......................................................112assigning the screen button......................................103audio formats...........................................................34audio formats supported ............................................34audio sourcedisplaying detailed information..........................100selecting ........................................................15audio source, setting.................................................15automatic call answering ............................................91automatic station search (autostore) ............................24autostore ...................................................... 24, 172AUXswitching to an external audio source ..................46avoiding a stretch of road.........................................135avoiding stretches of road ........................................135Bback button .............................................................10Best FM ..................................................................23Best FM preset memory.............................................23Bluetooth® ..............................................................49adding a new device ................................. 61, 93authorized devices ................................... 61, 92connecting an authorized device with the PCM........................................... 61, 92deleting an authorized device from the list ............................................ 61, 92deleting the list of authorized devices .......... 61, 92disconnecting an authorized and connected device from the PCM .........................61displaying authorized devices..................... 61, 92renaming an authorized device ................... 61, 92settings.................................................. 61, 92switching on/off...............................................51brightness of the display ............................................18buttons .....................................................................8Ccall forwarding..........................................................89call settings .............................................................89call waiting.........................................59, 72, 73, 90accepting a call ....................................... 59, 72ending a second call................................. 59, 72rejecting a call......................................... 59, 72callingdialing a number ...................................... 55, 67number from the list of previous calls .......... 56, 69number from the list of received calls .......... 57, 70phonebook entry...................................... 56, 68calling a destination from the personal destination memory......................................130calling the destination ..............................................128canceling a block....................................................135CD .......................................................................172CD/DVDcalling up the main menu...................................36ejecting all CDs/DVDs.......................................36ejecting CDs/DVDs individually ................... 34, 35fast forward/reverse ........................................38loading all CDs/DVDs........................................35loading CDs/DVDs individually .................... 34, 35repeating a track .............................................38selecting a CD/DVD..........................................36selecting a chapter...........................................37selecting a track ..............................................36selecting a track (MP3-CD).................................36setting DVD audio groups ..................................38setting the DVD audio format .............................37setting the mode..............................................36skipping to the next track ..................................38starting/stopping scanning ................................38switching the shuffle function on and off...............38CD-Extra CD...........................................................172changing the PIN.......................................................94commandsglobal commands ..........................................153local commands ............................................153commands for voice control .....................................153conference ...................................................... 59, 73configuring the display ...............................................15continuing recording (Sport display) ...........................116controls ....................................................................8copyright.................................................................33cordless handset ......................................................80accepting a call ...............................................81call waiting (swapping) and conference ................82charging.........................................................80dialing a number ..............................................81ending a call ...................................................81making a further call.........................................81muting the microphone .....................................81phonebook......................................................83rejecting a call.................................................81settings..........................................................87

176 Indexswitching on/off .............................................. 80text messages (SMS) ....................................... 85creating a contact person (logbook)..................110, 111creating a driver (logbook) ..............................109, 111creating a template for an SMS................................... 79creating a trip destination (logbook)..................110, 111creating a trip purpose (logbook)......................110, 111Ddefining the reference lap (Sport display) .................... 119deleting .................................................................. 10authorized Bluetooth device........................61, 92contact person (logbook) ................................ 112contents of the SIM card................................... 69destination (list of previous destinations)............ 127destinations from the personal destination memory........................... 131driver (logbook)............................................. 112key assignment in the logbook......................... 113lap in the Sport display recording ..................... 118list of authorized Bluetooth devices.............. 61, 92phonebook entry ............................................. 68recording in the Sport display .......................... 118reference lap for the Sport display.................... 119stopovers..................................................... 137telephone number..............................57, 70, 71text message (SMS)......................................... 77trip destination (logbook) ................................ 112trip purpose (logbook) .................................... 112trips in the logbook........................................ 114vCard ............................................................ 78deleting a contact person (logbook)........................... 112deleting a destination (list of previous destinations) .................................... 127deleting a destination (personal destination memory) .................................. 131deleting a driver (logbook)........................................ 112deleting a lap (Sport display)..................................... 118deleting a recording (Sport display)............................ 118deleting a trip destination (logbook) ........................... 112deleting a trip purpose (logbook)............................... 112deleting characters................................................... 10deleting entered characters........................................ 10deleting the reference lap (Sport display) .................... 119deleting trips ......................................................... 114destination input using geographical coordinates......................................... 138dialing a number (telephone) ................................55, 67direct dialing.....................................................55, 67display...................................................................... 7cleaning ........................................................... 7color touchscreen.............................................. 7faults............................................................... 7operation ......................................................... 7switching back on............................................ 17switching off ................................................... 17displaying building contours in the map display ............ 149displaying destination/location .................................. 148displaying detailed information about the audio source .................................................... 100displaying driving instructions in the map display.......... 149displaying sections of the route................................. 148displaying the footer in the map display ...................... 149displaying the north arrow in the map display............... 149displaying the system version ..................................... 20displaying the total route in the map........................... 147displaying traffic messages (XM NavTraffic)................... 98displaying traffic messages in the map display............. 149Dolby Digital .......................................................... 172Dolby® Digital ......................................................... 34DTMF tones........................................................... 172DTS ..............................................................34, 172DVD ..................................................................... 172Eeditingaddress of a destination (list of previous destinations)............................ 127address of a destination (personal destination memory) ......................... 129data from the current trip (logbook) .................. 109destination name of a personal destination......... 130phonebook entry ............................................. 68editing an address (list of previous destinations)........... 127editing an address (personal destination memory) ........ 129ejecting a CD ........................................................... 11ejecting a DVD ......................................................... 11ejecting CDs/DVDs ................................................... 34emergency call......................................................... 73end call button ......................................................... 10ending a call .....................................................54, 66ending a lap (Sport display) ...................................... 116entering a name ....................................................... 13entering a space....................................................... 13entering an address ................................................ 124entering an address (list of previous destinations)..................................... 126entering an address (personal destination memory) .................................. 129entering an SMS....................................................... 13entering the street .................................................. 125entering the town.................................................... 125entering the zip code............................................... 125establishing an additional call...............................58, 72evaluating a recording (Sport display)......................... 117external audio sourceswitching to an external audio source.................. 46external audio source (AUX) ........................................ 46Ffast forward/reverse .................................. 38, 41, 44faults with the display .................................................. 7finding the cordless handset ....................................... 93forward/reverseCD/DVD ......................................................... 38iPod .............................................................. 41USB .............................................................. 44frequency entry ........................................................ 23Ggeographical coordinates......................................... 138GPS ..................................................................... 172GPS antenna.......................................................... 122

Index 177Hhang up button .........................................................10having a conversation ........................................ 53, 65help function for the voice control system ...................157IIMEI.............................................................. 89, 172individual vehicle settings (individual memory)............... 101input menuoperating input menus ......................................13setting the layout .............................................17inserting the SIM card................................................64interfaceiPod...............................................................39USB...............................................................42iPod .......................................................................39calling up the main menu ...................................39fast forward/reverse ........................................41playlists..........................................................40repeating a track .............................................41searching for tracks .........................................40shuffle function ................................................41skipping to the next track ..................................41switching to iPod mode.....................................39track list.........................................................41iPod interface...........................................................39Jjack for iPod ............................................................39Llandmark navigation ................................................140left rotary knob...........................................................9lift receiver button.....................................................10list of previous calls........................................... 56, 69adding to a number .................................. 57, 70calling a number ...................................... 56, 69deleting a number .................................... 57, 70displaying the list ..................................... 56, 69sending a message to a number from the list ............................................ 57, 70storing a number in the phonebook ............. 56, 70list of previous destinations.......................................126list of received calls........................................... 57, 70adding to a number from the list ................. 58, 71calling a number from the list ..................... 57, 70deleting a number from the list ................... 57, 71displaying the list ..................................... 57, 70sending a message to a number from the list ............................................ 58, 71storing a number from the list in the phonebook ..................................... 57, 71listsnavigating in lists .............................................11showing the first letter of the list entries...............12loading a disc...........................................................34loading CDs/DVDs.....................................................34location information.................................................100locking doors .........................................................101logbook.................................................................108activating/deactivating ....................................108activating/deactivating the reminder..................108assigning a key..............................................112changing the contact person............................110changing the driver.........................................109changing the remarks .....................................110changing the trip destination ............................109changing the trip purpose................................110changing the trip type .....................................109continuing recording.......................................111creating a contact person................................111creating a driver ............................................111creating a new contact person .........................110creating a new driver ......................................109creating a new trip destination..........................110creating a new trip purpose .............................110creating a trip destination ................................111creating a trip purpose....................................111deleting a contact person ................................112deleting a driver.............................................112deleting a key assignment ...............................113deleting a trip destination ................................112deleting a trip purpose ....................................112deleting trips .................................................114editing data from the current trip ......................109managing lists ...............................................111renaming a contact person ..............................112renaming a driver...........................................112renaming a trip destination...............................112renaming a trip purpose ..................................112setting the standard trip ..................................109storing a refueling stop ...................................111transferring data ............................................113viewing the list of stored trips...........................111Mmaking a detour around a route section ......................133manual frequency entry ..............................................23MAP......................................................................146adapting the map display.................................149changing the scale .........................................146display of the total route..................................147displaying building contours .............................149displaying destination/location..........................148displaying driving instructions in the map display .............................................149displaying sections of the route ........................148displaying the footer .......................................149displaying the north arrow................................149displaying traffic messages..............................149moving .........................................................147setting a 3D map ...........................................149setting a northerly map display .........................149setting autozoom ...........................................147setting the display layout .................................148setting the intersection zoom ...........................147setting the map to a northerly orientation ...........147map......................................................................146adapting the map display.................................149map display ...........................................................146memory button .........................................................22menuactivating/selecting a menu item.........................11exiting a menu without making a selection ............11general operation.............................................11Meridian Lossless Packing ................................ 34, 172MIXED .....................................................................23Mixed Mode CD ......................................................172MIXED preset memory ...............................................23

Index 179Rradio.......................................................................22RDS...............................................................25setting the mode..............................................22storing stations on station buttons ......................23switching to radio mode ....................................28tuning to stations .............................................22radio text...............................................................173RDS.............................................................. 25, 173switching radio text on/off.................................25switching RDS on/off ........................................25rear view camera ....................................................104extending and retracting manually.....................104extending automatically...................................104picture settings .............................................105retracting automatically...................................105received calls................................................... 57, 70recording a trip section (trace) ..................................141recording laps (Sport display)....................................115redialing ................................................... 55, 67, 91regional code ................................................. 34, 173regional Protection Code............................................34rejecting a call.................................................. 55, 67renamingcontact person (logbook).................................112driver (logbook) .............................................112recording (Sport display) .................................117reference lap (Sport display) ............................119trip destination (logbook) .................................112trip purpose (logbook).....................................112renaming a contact person (logbook)..........................112renaming a driver (logbook) ......................................112renaming a recording (Sport display) ..........................117renaming a trip destination (logbook)..........................112renaming a trip purpose (logbook)..............................112renaming the reference lap (Sport display)...................119repeating (track) .......................................................38repeating a trackCD/DVD .........................................................38iPod...............................................................41USB...............................................................44resetting personal settings .........................................20resetting settings......................................................20resetting the reference lap (Sport display) ...................119resetting trip data ...................................................107restoring factory settings ...........................................20restoring vehicle handover settings ..............................20right rotary knob.........................................................9ringtone type.................................................... 60, 88ringtone volume ................................................ 60, 88routedisplaying route sections .................................100route alternatives ....................................................126route sections ........................................................100SSatellite Radio ..........................................................27savingvCard.............................................................78scanning (radio mode)................................................23searching for tracksiPod...............................................................40USB...............................................................43sections of the route................................................100selecting a chapter (Video-DVD mode)...........................37selecting a trackCD/DVD .........................................................36MP3-CD ..........................................................36sending a destination from the personal destination memory as a vCard.....................130sending a vCard................................................ 56, 69sending DTMF tones.......................................... 58, 71sending your own number...........................................91settingarrangement of letters on the keyboard in the input menu ................................17AudioPilot .......................................................20automatic call answering ...................................91balance ..........................................................19bass ..............................................................18brightness (rear view camera) ..........................105brightness of the display ...................................18call forwarding.................................................89canceling a block ...........................................135color (rear view camera)..................................105contents of the personal display .......................107contrast (rear view camera) .............................105date...............................................................15day design......................................................18daylight saving time ..........................................16daytime running lights .....................................102display ...........................................................15display colors ..................................................18display format for the date.................................16display format for the time.................................16display layout in the map display .......................148display unit for temperatures..............................17displaying the total route in the map display ........147DVD audio format.............................................37DVD audio groups ............................................38dynamic route planning ...................................135fade-out light .................................................101fader..............................................................19intersection zoom...........................................147keyboard layout ...............................................17language ........................................................15language for voice control ...............................155layout of the input menu ....................................17light options ..................................................101linear .............................................................20loudness.........................................................19making a detour around a route section .............133mode .............................................................15mode (AUX).....................................................46mode (CD/DVD) ...............................................36mode (iPod).....................................................39mode (radio)....................................................22mode (USB).....................................................43night design ....................................................18northerly orientation for the map display.............147options for air conditioning...............................102options for locking the doors............................101orientation light..............................................102preset memory ................................................23rain sensor....................................................103rear wiper .....................................................103ringtone type...................................................88ringtone volume ...............................................88SDV (speed-dependent volume)...........................19short/quick route ...........................................135sort criteria for the station list ............................25surround.........................................................19switching the touchscreen on/off ........................18time...............................................................16

180 Indextime zone....................................................... 16treble ............................................................ 18unit for consumption ........................................ 17unit for distances............................................. 16units.............................................................. 15volume .......................................................... 14volume of the navigation announcement ............ 124volume of the traffic program announcements ......................... 25wiper options................................................ 103setting a 3D map.................................................... 149setting a block for a route section ............................. 133setting a detour ..................................................... 133setting a northerly map display ................................. 149setting a perspective map........................................ 149setting a short route ............................................... 135setting a short/quick route....................................... 135setting AudioPilot...................................................... 20setting automatic transfer for the phonebook ................ 96setting autozoom ................................................... 147setting consumption.................................................. 17setting day design .................................................... 18setting daylight saving time ........................................ 16setting dynamic route planning.................................. 135setting fade-out light ............................................... 101setting filtering of background noise ............................ 20setting km as the unit for distances ............................. 16setting light options ................................................ 101setting linear............................................................ 20setting locking of the doors...................................... 101setting mls as the unit for distances............................. 16setting night design .................................................. 18setting picture parameters (rear view camera)brightness.................................................... 105color ........................................................... 105contrast....................................................... 105setting ringtones ...................................................... 88setting surround....................................................... 19setting the air conditioning ....................................... 102setting the arrangement of letters on the keyboard in the input menu ........................................ 17setting the audio source .......................................9, 15setting the balance ................................................... 19setting the bass ....................................................... 18setting the climate control memory............................ 102setting the colors for the display ................................. 18setting the date........................................................ 15setting the daytime running lights .............................. 102setting the display format for the date.......................... 16setting the display format for the time .......................... 16setting the display layout ......................................... 148setting the display of temperatures.............................. 17setting the display unit for temperatures....................... 17setting the fader....................................................... 19setting the keyboard layout ........................................ 17setting the language.................................................. 15setting the loudness.................................................. 19setting the map to a northerly orientation.................... 147setting the mode ...................................................... 15setting the mode (CD/DVD) ........................................ 36setting the orientation light ....................................... 102setting the preset memory in radio mode...................... 23setting the rain sensor............................................. 103setting the rear wiper .............................................. 103setting the SDV (speed-dependent volume) .................... 19setting the standard trip for the logbook..................... 109setting the time........................................................ 16setting the time zone................................................. 16setting the treble ...................................................... 18setting the unit for consumption .................................. 17setting the unit for distances ...................................... 16setting the volume ...............................................9, 14setting the volume (voice control system announcement)......................... 155setting transfer of your own number ............................ 91setting units............................................................. 15setting wiper options............................................... 103settingsBluetooth®..............................................61, 92calls .............................................................. 89display........................................................... 17individual vehicle settings (individual memory) ........................................ 101messages and data.......................................... 95phonebook ..................................................... 63picture settings (rear view camera) ................... 105radio mode..................................................... 25ringtones ....................................................... 60SIM card ........................................................ 94telephone (PCM telephone) ................................ 88shuffle functionCD/DVD ......................................................... 38iPod .............................................................. 41USB .............................................................. 44SIM carddeleting contents ............................................. 69SIM settings............................................................. 94SIM slot .................................................................. 10skipping a track (CD/DVD, USB, or iPod mode) .............. 10slot for the SIM card.................................................. 10SMS ..............................................................74, 173calling telephone numbers................................. 78creating a template.......................................... 79creating and sending a new text message............ 76creating using a text template............................ 76creating with attached reply............................... 75creating with new text................................75, 76deleting.......................................................... 77deleting a vCard .............................................. 78displaying the complete text .............................. 79editing and sending the text of the last message ............................................. 76forwarding...................................................... 77numbers in text messages ................................ 78reading .......................................................... 74reading a vCard............................................... 78replying.......................................................... 74replying using a text template ............................ 75replying with Yes or No ..................................... 75saving a vCard ................................................ 78storing coordinates .......................................... 79storing telephone numbers ................................ 78using coordinates for route guidance .................. 78SMS service center................................................... 95SMS settings ........................................................... 95SMS signal tone ....................................................... 95sound settingssetting AudioPilot............................................. 20setting linear................................................... 20setting surround .............................................. 19setting the balance........................................... 19setting the bass............................................... 18setting the fader.............................................. 19setting the loudness......................................... 19

Index 181setting the SDV................................................19setting the treble .............................................18space .....................................................................13Sport Chrono package.............................................115Sport display..........................................................115continuing recording.......................................116defining the reference lap ................................119deleting a lap ................................................118deleting a recording .......................................118deleting the reference lap................................119ending a lap ..................................................116evaluating a recording ....................................117renaming a recording .....................................117renaming the reference lap ..............................119resetting the defined reference lap....................119starting a new lap ..........................................116starting recording ..........................................115stopping recording.........................................116storing a lap as the reference lap......................118timing the interval ..........................................116transferring data............................................119stalk for turn signal, high beam, and headlamp flasher .................................... 154, 155starting a new lap (Sport display) ...............................116starting a search (radio or TV mode) ............................10starting recording (Sport display)...............................115starting route guidance ............................................125starting/stopping scanningCD/DVD .........................................................38USB...............................................................45station button................................................... 22, 23station list........................................................ 22, 24setting sort criteria...........................................25station search ..........................................................22status of the call diversion ..........................................90stopovers ..............................................................136deleting........................................................137displaying .....................................................136entering .......................................................136reorganizing..................................................137stopping recording (Sport display)..............................116stopping route guidance...........................................125storingcoordinates (vehicle position) .............................79destination (off-road navigation) ........................144destination from the list of previous destinations in the personal destination memory ...........................127key assignment in the logbook .........................112lap as reference lap........................................118phonebook entry..............................................68position ........................................................144refueling stop (logbook)...................................111station (radio) ..................................................23telephone number ..................... 56, 57, 70, 71telephone numbers from a text message..............78storing a destination ...................................... 127, 144storing a lap as the reference lap...............................118storing a position (off-road navigation).........................144storing stations.........................................................23choosing a station in the station list and storing it ....................................24manually storing stations ........................... 24, 29storing via an automatic station search ................24Surround sound 5.1.................................................172switchingswitching to an external audio source ..................46switching to radio mode ............................ 22, 28switching between day/night.......................................18switching between the main menus ................................9switching on/off........................................................14Bluetooth® .....................................................51call waiting......................................................90PCM (via the ignition) ........................................14PCM (via the volume control) ..............................14RDS...............................................................25RDS radio text .................................................25shuffle function (CD/DVD) ..................................38shuffle function (iPod)........................................41shuffle function (USB)........................................44telephone .......................................................88touchscreen....................................................18switching the device on and off......................................9switching the device on/off (via the ignition)...................14switching the device on/off (via the volume control).........14switching the touchscreen on/off .................................18Ttelephoneaccepting a call ....................................... 53, 66automatic call answering ...................................91Bluetooth® .....................................................49call waiting.............................................. 59, 72call waiting (swapping) and conference......... 59, 73calling a phonebook entry .......................... 56, 68changing the PIN..............................................94dialing a number ...................................... 55, 67direct dialing ........................................... 55, 67displaying the IMEI............................................89displaying the phonebook .......................... 56, 68ending a call............................................ 54, 66entering the PIN ...............................................65entering the PUK..............................................65establishing an additional call ..................... 58, 72having a conversation ............................... 53, 65inserting the SIM card .......................................64list of previous calls.................................. 56, 69list of received calls.................................. 57, 70making an emergency call .................................73muting the microphone.............................. 53, 65number of the SMS service center ......................95redialing ................................................. 55, 67rejecting a call......................................... 55, 67selecting a network ..........................................88sending DTMF tones ................................. 58, 71setting call forwarding.......................................89setting the redial function ..................................91setting the ringtone type............................ 60, 88setting the ringtone volume........................ 60, 88setting transfer of your own number ....................91settings (PCM telephone) ...................................88settings for PIN entry ........................................94SMS settings...................................................95switching call waiting on/off ...............................90switching on/off...............................................88switching the PIN prompt on and off ....................94switching the SMS signal tone on/off ...................95text messages (SMS) ........................................74using a stored PIN............................................94telephone conference ........................................ 59, 73

182 Indextext message (SMS).................................................. 74calling telephone numbers................................. 78creating a template.......................................... 79creating and sending a new text message............ 76creating using a text template............................ 76creating with attached reply .............................. 75creating with new text ...............................75, 76deleting ......................................................... 77deleting a vCard.............................................. 78displaying the complete text.............................. 79editing and sending the text of the last message............................................. 76forwarding...................................................... 77numbers in text messages ................................ 78reading.......................................................... 74reading a vCard .............................................. 78replying ......................................................... 74replying using a text template............................ 75replying with Yes or No..................................... 75saving a vCard ................................................ 78storing coordinates.......................................... 79storing telephone numbers................................ 78using coordinates for route guidance .................. 78timing the interval (Sport display)............................... 116touchscreen .......................................................... 173trace...........................................................141, 143tracing a route ....................................................... 143track listiPod .............................................................. 41USB .............................................................. 44track skip(CD/DVD) ....................................................... 38iPod .............................................................. 41USB .............................................................. 44trafficdisplaying traffic messages ............................... 98XM NavTraffic in the MAP display...................... 146traffic programactivating traffic program announcements............ 24setting the volume of the announcements ............ 25transferring data (logbook)....................................... 113transferring data (Sport display) ................................ 119trip computer (TRIP)................................................ 107trip data................................................................ 107tuner ...................................................................... 22tuningstation (radio).................................................. 22tuning to AM ............................................................ 22tuning to FM ............................................................ 22tuning to stationstuning to stations by manually entering the frequency...........................................23, 28tuning to stations using the station buttons....................................22, 28tuning to stations using the station list ................................................. 22tuning to stations using the station search............................................ 22tuning to stations using the station search with scanning......................... 23tuning to TV............................................................. 22twin SIM cards ......................................................... 64UUMTS ................................................................... 173undoing a selection from the menu .............................. 10Unfinalized CD........................................................ 173USB ....................................................................... 42fast forward/reverse ........................................ 44repeating a track ............................................. 44searching for tracks......................................... 43shuffle function................................................ 44skipping to the next track.................................. 44starting/stopping scanning................................ 45switching to USB mode..................................... 43track list ........................................................ 44USB interface of the PCM........................................... 42using geographical coordinates from an SMS for route guidance......................................... 78VVanity numbers ...................................................... 173vCard ................................................................... 174voice control.......................................................... 151activating ..................................................... 154commands ................................................... 153deactivating .................................................. 155emergency cases .......................................... 162hands-free microphone ................................... 152operating example for CD/DVD mode................ 161operating example for navigation mode ............. 166operating example for radio mode .................... 158operating example for telephone mode.............. 162operating lists ............................................... 157performing voice adaptation ............................ 156setting quick dialog........................................ 156setting repetition of the commands................... 156setting the display of hints............................... 156setting the language....................................... 155setting the volume of the announcement ............ 155speech intelligibility ........................................ 152symbols ....................................................... 154using the help function.................................... 157voice entries ................................................. 154WWMA .............................................................34, 174XXM NavTraffic .......................................................... 98XM Satellite Radio..................................................... 27

183Federal Communications Commission (FCC) Compliance Statement - United StatesThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:1 This device may not cause harmful interference, and2 the device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.Sports car: FCC ID: T8G667XBT Cayenne: FCC ID: T8G668XBTCordless handset: FCC ID: QZ9-PAG-BTBHRemark: Cordless handset FCC Label mark is placed inside of the handset. To get this mark visible, the cordless handset has to be opened and the battery has to be moved aside. Industrie Canada (IC) Compliance Statement This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions:1 This device may not cause harmful interference, and2 the device must accept any interference received, including interference that may cause undesired operation of the device.Canadian ICES-003 (Interference-Causing Equipment Standard)This Class B digital apparatus complies with Canadian ICES-003.Sports car: IC: 6434A66XXBT Cayenne: IC: 6434A66XXBTCordless handset: IC: 5927A-BTBH

184Bluetooth qualificationInformation on the laser equipmentThis laser product is classified as a class 1 laser product in accordance with the national/international standards DIN EN 60825-1 : 2003-10 and DHHS Rules 21 CFR Subchapter J to the date of manufacture. The laser beam in this class 1 laser product is so weak that it poses no threat in any situation, or this product is designed that the laser beam is limited to the inside of the device. A laser encased in this device can, however, still be powerful enough to qualify as a higher class of laser. For this reason the protective case should not be opened at any time (loss of warranty and goodwill). Technical data for the laser equipment inside the device: Output power from laser beam: 0.68 mW (DVD) / 0.85 mW (CD)Wave length of laser beam: 665 nm (DVD) / 795 nm (CD)The laser diode is not pulsed during operation.Approval of Anatel in BrasilThis equipment works in secondary mode, i.e. it is not afforded protection against harmful interference, even from stations of the same type, and it cannot cause interference to systems that operate in primary mode.QDID: B013738 QDID: B013739 QDID: B014095 sports car Cayenne Cordless handset

Navigation menu

Upload a User Manual

Namespaces

Wiki Guide
HTML
PDF
Info

Views

User Manual
Discussion / Help

Navigation

© 2024 UserManual.wiki | Privacy Policy

Contact Us
DMCA