C MAX Asia CM9301SDT2014 Bluetooth 4.0 Module User Manual

C-MAX Asia limited Bluetooth 4.0 Module 2ABBXCM9301SDT2014 UseMan

a href="https://usermanual.wiki/C-MAX-Asia" itemprop="url"> C MAX Asia >

User Manual

CMM-9301-SDT Bluetooth Low Energy Serial Data Bridge Module This module is limited to OEM installation ONLY SPEC No. CMM-9301-SDT BLE Bridge module Revision 2.0 State 2015-03-04C-MAX printed 2015-03-04 Version English Page 1 of 16 C-MAX 1.0 Description The CMM-9301-SDT module is a Bluetooth 4.0 Single Mode (Bluetooth Low Energy) module for implementing Bluetooth functionality into various electronic devices. Standalone as a Bluetooth Low Energy End Product, it is embedded with a proprietary data exchange profile allowing the bridging of data from an external host by means of UART link via Bluetooth 4.0 protocol to a Bluetooth 4.0 Dual Mode device. Inclusive of dedicated hardware for the Physical and Link Layer implementation of Bluetooth Smart from EM Microelectronics and a high performance interface MCU, this SDT module is optimized for embedded applications such as health monitoring, sports devices, human sensoring devices, home appliances etc. Without any additional study of the Bluetooth protocol, customers are able to develop and test their own applications. 1.1 Features o Bluetooth Low Energy (BLE) (Single Mode) full corestack embedded module in slave mode o Enables application with Bluetooth connectivity with no Bluetooth knowledge required whatsoever o Embedded with BT4.0 GATT profile and Device Information Service o 1Mbps on-air data rate o Programmable BLE parameters such as: Device Information, connection interval and more... o UART interface with external host via AT command set o Dimension: 15.5 x 22.5 x 3.2 mm o No tuning necessary o Operational Temperature Range -20 / +60°C o Tape and Reel packaged ready for SMT assembly 1.2 Pin Assignments and Dimensions Top View Detailed Dimensions All dimensions are in mm. Connection pin pitch = 2.54 mm +/- 0.1mm Module Thickness = 3.2mm max.
CMM-9301-SDT Bluetooth Low Energy Serial Data Bridge Module SPEC No. CMM-9301-SDT BLE Bridge module Revision 2.0 State 2015-03-04C-MAX printed 2015-03-04 Version English Page 2 of 16 C-MAX Pin Number Pin Name Input to / Output from Module Pin Description 1 RXD I RXD pin of UART communication with Host 2 Reserved I/O Reserved pin for future use 3 Reserved I/O Reserved pin for future use 4 Reserved I/O Reserved pin for future use 5 Reserved I/O Reserved pin for future use 6 GND GND Ground connection for module 7 TXD O TXD pin of UART communication with Host 8 UART_EN I Connect to VCC for UART serial data transfer mode 9 SLEEP I Module wake up pin to wake module from low power sleep mode (Wake-up = LO, Sleep = HI) . In Sleep mode UART interface will be disabled. 10 VDD VDD 2.3 ~ 3.6 V voltage supply pin to module 11 IRQ O Interrupt Request Pin to signal host when data received in buffer and ready to poll 12 RST I Reset (Active LO) 13 LINK O Module Link Indication signal (Bluetooth Disconnected = LO; Bluetooth Connected = HI) 14 RESERVED I/O Reserved pin for future use 1.3 Recommended PCB layout and foot print Recommended module contact pads footprint
Download:
Mirror Download [FCC.gov]
Document ID2554543
Application IDc+4y6bMTskly6eAALBj7NA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize34.1kB (426211 bits)
Date Submitted2015-03-13 00:00:00
Date Available2015-03-13 00:00:00
Creation Date2015-03-04 12:22:40
Producing SoftwareAcrobat Distiller 9.0.0 (Windows)
Document Lastmod2015-03-04 12:22:40
Document TitleMicrosoft Word - 2ABBXCM9301SDT2014 UseMan
Document CreatorPScript5.dll Version 5.2.2
Document Author: Frankie
FCC ID Filing: 2ABBXCM9301SDT2014

Navigation menu