C and D Electronics ML-21 REMOTE STOP User Manual Remote Stop Instruction Manual

Download:
Mirror Download [FCC.gov]
Document ID	546622
Application ID	9x+BLLuc22gEwl5xA1zSfQ==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	2.72kB (34044 bits)
Date Submitted	2005-05-30 00:00:00
Date Available	2005-05-30 00:00:00
Creation Date	2005-05-26 17:41:02
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2005-05-26 17:41:38
Document Title	Remote Stop – Instruction Manual
Document Creator	Acrobat PDFMaker 6.0 for Word
Document Author:	Jessie

Remote Stop – Instruction Manual
Introduction
The Remote Stop is a safety and training device designed for virtually all motorcycles and ATV’s.
The Remote Stop operates with a transmitter and receiver that easily coincides with
OEM (Original Equipment Manufacturer) engine shut off switches (kill switches).
Installation
Locate the vehicle’s OEM engine shut off switch (kill switch). Identify the OEM engine shut off
switch lead wires. There are normally 2 wires bound together by an insulator. The wires lead from
the switch to the engine.
Attach the Remote Stop to the handle bar at a point near the OEM lead wires.
Do so by using the Velcro strap attached to the Remote Stop.
Expose one of the OEM lead wires, cutting a small slit in the insulator if necessary. (Engine
should be off during installation). Splice the ‘blue’ wire of the Remote Stop to the exposed wire of
the OEM engine shut off switch.
Locate a bolt head or something similar to provide a ‘ground’ point.
Attach the ‘green’ ground wired of the Remote Stop to this point.
Basic installation is complete.
Use of the Remote Stop
With the receiver installed, normal use of the vehicle is able.
Rider may start the vehicle and operate normally.
The parent, or other onlooker, holds the transmitter.
The transmitter’s antennae should be fully extended.
Should the rider begin to encounter any noticeable danger, simply press and hold the button on the
transmitter until the engine stops. Engine should stop almost immediately.
Parts
·
(1) Remote Stop bag which includes the receiver and battery components.
·
(1) Remote Stop transmitter.
·
(4) ‘AA’ batteries, (not included).
Cautions and Warnings
Rider should operate the vehicle within a 300-foot radius of the transmitter. Visibility of the
onlooker may be impaired if any further.
Batteries should be checked, as well as the Remote Stop’s functionality prior to riding or driving
the vehicle.
To do so, start the vehicle, (following the Remote Stop installation), and press the transmitter
button to ensure the engine stops.
This should be done prior to each time the vehicle is operated while the Remote Stop is installed.
Disassembly
Once the rider has the ability to operate the vehicle well and with confidence, the Remote Stop can
be removed.
This is an undetermined period of time. Each rider’s ability is different.
Using wire snips cut the blue wire as close to the OEM lead wire as possible. Be careful not to
damage the OEM lead wire.
Remove the green ground wire from the ground point.
Remove the Remote Stop receiver from the handlebar
FCC NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO
THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 2
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:bd6db8b9-7f0c-4b35-a4b8-148a07e72ea3
Producer                        : Acrobat Distiller 6.0 (Windows)
Company                         : Waltek
Source Modified                 : D:20050526094034
Create Date                     : 2005:05:26 17:41:02+08:00
Creator Tool                    : Acrobat PDFMaker 6.0 for Word
Modify Date                     : 2005:05:26 17:41:38+08:00
Metadata Date                   : 2005:05:26 17:41:38+08:00
Document ID                     : uuid:5767a1a9-a361-4ada-9c1c-78e4322e337f
Format                          : application/pdf
Title                           : Remote Stop – Instruction Manual
Creator                         : Jessie
Tagged PDF                      : Yes
Author                          : Jessie

EXIF Metadata provided by EXIF.tools