CAD Audio WX3000R HANDHELD TRANSMITTER User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3051806
Application ID	GXaYRyZpoNwTGWBumoz0sA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	53.98kB (674766 bits)
Date Submitted	2016-07-05 00:00:00
Date Available	2016-07-05 00:00:00
Creation Date	2016-06-29 14:22:56
Producing Software	Acrobat Distiller 10.0.0 (Windows)
Document Lastmod	2016-07-01 17:38:20
Document Title	Users Manual
Document Creator	Adobe InDesign CC 2015 (Macintosh)
Document Author:	francis.zhang

Two-Year Limited Warranty
CAD Audio hereby warrants that this product will be free of defects in
material and workmanship for a period of two years from the date of
purchase. In the unlikely event that a defect occurs CAD Audio will, at
its option, either repair or replace with a new unit of equal or greater
value. Retain proof of purchase to validate the purchase date and return
it with any warranty claim.
This warranty excludes exterior finish or appearance, damage from
abuse, misuse of the product, use contrary to CAD Audio’s instructions
or unauthorized repair. All implied warranties, merchantability, or fitness
for a particular purpose is hereby disclaimed and CAD Audio hereby
disclaims liability for incidental, special or consequential damages
resulting from the use or unavailability of this product.
This warranty gives you specific legal rights and you may have other
rights that vary from state to state. Some states do not allow the exclusion
or limitation of incidental or consequential damages or limitations on
how long an implied warranty lasts, so the above exclusions and
limitations may not apply to you.
Note: No other warranty, written or oral is authorized by CAD Audio.
Shipping Instructions
Please call our customer service department at 440-349-4900 for a
pre-approved return authorization number.
Carefully repack the unit and return the insured package to:
CAD Audio, 6573 Cochran Road, Building I, Solon, Ohio 44139.
RETURNS WITHOUT A PRE-APPROVED RETURN AUTHORIZATION
NUMBER WILL BE REFUSED.
If outside the United States, contact your local dealer or distributor for
warranty details.
13
Individuals with cardiac pacemakers and other similar medical devices
should consult with their physician before using any RF devices.
Though the output level of this wireless system is below 50 milliwatts,
the proximity of the transmitter to the implant device could pose a threat.
As with any wireless product, environmental conditions can reduce or
in some cases prohibit a successful connection between the transmitter
and the receiver.
This device complies with Part 15 of the FCC Rules. Most users of
CAD Audio wireless products in the United States do not need a license
for operation. However, the rules for unlicensed operation state that
this device must not operate in excess of 50 milliwatts and it must not
cause harmful interference to other wireless devices, and must accept
interference received from other devices. Wireless products meeting
CAD factory standards adhere to these rules. The FCC reserves the right
to change these rules at any time. For more information contact the
FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless
microphone website at:
www.fcc.gov/cgb/wirelessmicrophones
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation
of the device.
Under Industry Canada regulations, this radio transmitter may only
operate using an antenna of a type and maximum (or lesser) gain
approved for the transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type and its gain should
be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is
not more than that necessary for successful communication.
Conformément à la réglementation d’Industrie Canada, le présent
émetteur radio peut fonctionner avec une antenne d’un type et d’un
gain maximal (ou inférieur) approuvé pour l’émetteur par Industrie
Canada. Dans le but de réduire les risques de brouillage radioélectrique
à l’intention des autres utilisateurs, il faut choisir le type d’antenne
et son gain de sorte que la puissance isotrope rayonnée équivalente
(p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une
communication satisfaisante.
Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation est
autoris é e aux deux conditions suivantes : (1) l’appareil ne doit pas
produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible
d’en compromettre le fonctionnement.
12
CADLiveTM WX3000
Introduction
CADLiveTM is designed to outperform your expectations and deliver
exceptional performance. Engineered to compliment the new
generation of exceptional sound systems - The CADLive Series taps our
Equitek studio heritage along with our live sound know-how in creating
an impactful and easy-to-use line of mics.
The CADLive 3000 series feature True Diversity operation to minimize
multipath interference along with CADLock™ Automatic Tone Encoded
Squelch to eliminate unauthorized transmissions in the signal path.
Frequency agile design when partnered with ScanLink™ technology will
precisely scan, select and link to the optimum channel allowing for an
easy, flexible frequency plan.
The CADLive handheld transmitter features metal construction and
the CADLive D90 Supercardioid dynamic capsule provides a powerful,
smooth and highly articulate profile. The handheld and body pack
transmitters also include SoftTouch™ multi-function On-Off/Mute
switches. CADLive bodypack transmitters are equipped with CADTone™
circuitry ensuring accurate reproduction of Hi-Z guitar and Lo-Z mic
inputs.
CADLive wireless features 10, 30, 50mW transmitter power adjustment
and dynamic range up to 110dB. Receivers and transmitters are
equipped with a high definition LCD display and full RF, AF, Battery Life,
Mic Sensitivity and RF power metering.
Receivers are housed in an all-metal chassis and supplied with single/
dual rack ears and a BNC relocation kit. Body pack systems include
Equitek E19 earworn and E29 lavalier mics. Both systems are supplied
with a heavy-duty carry case.
The CADLiveTM WX3000 includes the following features:
• True Diversity to minimize multipath interference
• CADLock™ Automatic Tone Encoded Squelch eliminates
unauthorized interference
• Frequency agile operation for maximum frequency plan flexibility
• ScanLink™ technology for instantaneous and automatic
channel configuration
• CADTone™ Body Pack input – Optimized Impedance interface Hi-Z for Guitar and Lo-Z for mic
• Metal construction Handheld Transmitter equipped with
CADLive™ D90 capsule
• High Contrast LCD displays on TX and RX
• Transmitters feature 10, 30, 50mW power adjustment to aid
in multiple system applications
•
•
•
•
Simultaneous usage of up to 15 systems per frequency band
Dynamic Range > 110dB
AA Batteries with up to 15 Hrs of battery life
Systems ship with rack ears single/dual BNC relocation kit and
durable carry case
• BodyPack systems include miniature E19 Earworn, E29 Lav,
WXGTR guitar cable
• XLR and ¼" outputs on receiver
Using the DA4090 Distribution Amplifier to Simplify
Multiple-System Installations
1. BNC 50 ohm cable.
2. Power cable.
3. Power adapter.
Startup Guide
1. Install new high quality alkaline batteries into transmitter,
observing proper polarity.
2. Power up receiver by holding power button for one second.
3. Hold the SET button for one second to unlock the
receiver menu.
4. Hold the SCAN button for one second to activate the ScanLinkTM
environmental frequency analysis, which automatically selects
a clear operating frequency.
DA4090 DISTRIBUTION AMPLIFIER
IR
ScanLink
IR
ScanLink
SET
LINK
SCAN
IR
ScanLink
SET
LINK
IR
ScanLink
SET
LINK
SCAN
SCAN
SET
LINK
SCAN
5. Turn on the transmitter by holding the power button
for one second.
6. Open the battery compartment to reveal the IR node.
7. Press the LINK button (note the IR node will illuminate). Align
the two IR nodes (transmitter and receiver) at a distance of
4"-12" (ambient room light can affect distance) for a few
seconds while the receiver updates the transmitter.
Your system is now ScanLink'd.
11
Simultaneous Use
580 - 600MHz Band R
Group
Channel
Frequency
580.000
584.600
600.000
586.900
588.800
590.900
597.400
581.000
583.300
588.600
598.100
581.300
595.700
591.200
599.400
Simultaneous Use
655 - 679MHz Band S
Group
Channel
Frequency
655.400
672.275
12
677.750
656.250
661.725
663.350
10
673.425
12
678.600
655.200
660.750
12
677.225
668.675
657.800
12
678.900
10
661.500
Receiver RX3000 (Rear)
1.
2.
3.
4.
DC power input jack. 12-18VDC, 300mA min, center positive.
XLRM-type low-impedance balanced audio output.
1/4" [6.35mm] high-level unbalanced ouput
BNC 50 ohm antenna inputs.
655 - 679MHz Band S
Channelization
These frequencies have been approved for use within the United States
and Canada as of the date of publication of this manual. It is the user’s
responsibility to comply with local regulations.
580 - 600MHz Band R
CH
CH
Group 1
580.000
582.200
584.600
586.600
588.500
590.600
593.500
596.500
600.000
Group 6
581.300
582.800
584.500
587.100
587.900
589.800
592.700
595.700
598.200
Group 2 Group 3
580.600
582.500
581.100
583.500
582.400
584.900
583.400
586.100
584.800
586.900
586.000
588.800
586.800
590.900
594.300
594.400
597.300
597.400
Group 7 Group 8
581.900
582.100
584.100
583.600
586.500
584.300
587.700
585.300
591.000
591.200
593.700
593.900
595.800
596.000
597.700
597.900
599.300
599.500
Group 4 Group 5
580.500
580.800
581.000
583.000
583.300
584.000
584.700
585.400
585.900
587.400
586.700
589.300
588.600
591.400
590.700
595.200
594.200
598.100
Group 9
583.100
584.200
587.300
593.300
599.200
584.400
587.500
589.500
599.400
CH
10
11
12
Group 1
655.400
658.500
660.575
662.050
664.425
666.200
669.450
670.650
672.275
674.775
676.500
677.750
Group 2 Group 3
656.250
655.200
657.500
656.675
659.225
657.800
661.725
659.450
663.350
660.750
664.550
663.200
667.800
665.325
669.575
669.225
671.950
671.525
673.425
673.575
675.500
676.600
678.600
678.575
Group 4 Group 5
656.775
656.100
659.500
657.225
661.200
659.550
662.600
661.575
663.700
663.900
665.250
667.500
666.500
668.750
670.100
670.300
672.425
671.400
674.450
672.800
675.775
674.500
677.900
677.225
CH
10
11
12
Group 6
655.425
657.400
660.425
662.475
664.775
668.675
670.800
673.250
674.550
676.200
677.325
678.800
Group 7 Group 8
655.700
656.550
658.800
657.800
660.875
659.825
662.350
662.025
664.725
663.650
666.500
664.850
669.750
668.100
670.950
669.875
672.575
672.250
675.075
673.725
676.800
675.800
678.050
678.900
Group 9 Group 10
655.500
657.075
656.975
659.800
658.100
661.500
659.750
662.900
660.050
664.000
663.500
665.550
665.525
666.800
669.525
670.400
671.825
672.725
673.875
674.750
676.900
676.075
678.875
678.200
FCC WARNING
This device complies with Part 74 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE 1: Any changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user's authority
to operate the equipment.
NOTE 2: This device complied with FCC radiation exposure limits as set
forth for an uscontrolled environment. This device should be installed
and operated so that its antenna(s) are not co-located or operating in
conjunction with any other antenna or transmitter

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Author                          : francis.zhang
Create Date                     : 2016:06:29 14:22:56+08:00
Modify Date                     : 2016:07:01 17:38:20+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2016:07:01 17:38:20+08:00
Creator Tool                    : Adobe InDesign CC 2015 (Macintosh)
Instance ID                     : uuid:a0ff600d-b90d-4689-adfd-81f9e69db645
Original Document ID            : xmp.did:028011740720681195FEF0546C2EE8E3
Document ID                     : xmp.id:656b2030-cb63-4c15-8626-737d57128249
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:a3389bb8-3644-4bc2-9bf4-780200baac75
Derived From Document ID        : xmp.did:01da391a-2fa8-4358-8fde-2747a68d8e49
Derived From Original Document ID: xmp.did:028011740720681195FEF0546C2EE8E3
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2015 (Macintosh)
History Changed                 : /
History When                    : 2016:04:12 10:30:51-04:00
Format                          : application/pdf
Title                           : <575833303030D3A2CEC4CBB5C3F7CAE92E706466>
Creator                         : francis.zhang
Producer                        : Acrobat Distiller 10.0.0 (Windows)
Trapped                         : False
Page Count                      : 9

EXIF Metadata provided by EXIF.tools