CANON Cameras, All Manual L0605047
User Manual: CANON CANON Cameras, All Manual CANON Cameras, All Owner's Manual, CANON Cameras, All installation guides
Open the PDF directly: View PDF .
Page Count: 147
Download | |
Open PDF In Browser | View PDF |
CallOfl 7_ower--_hotSD 430 DIGITAL I IIIIIIIIMI CDI-E207 D ICl IT/_L l;,'US C_LPH WIRELESS _o WIRELESS Before Using the Camera r o Shooting m Playback/Erasing Print/Transfer C&flOfl Settings Viewing Images on a TV set C_g -v o the Camera Wireless Connection Troubleshooting List of Messages Appendix o c Camera This guide explains User camera features Guide and procedures in detail. _=. CDI-E207-010 XX05XXX © 2005 CANON INC. PRINTED IN JAPAN oleo, _ 0,_E_ llt _.',_.t"" _ -_ N_Bri_e PRINT su.s_JEr DIREO _-'= _"° I_ F;1ITII _JF_t!l"t'_l * Connecting wirelessly between the camera and a computer is only possible with the Windows XP SP2 operating system. I Conventions Used in this Guide Icons appearing below titles indicate the modes in which the _rocedure can be used. Mode Switch See Functions Available in Each Shooting Mode (p. 144). In this guide, the Basic Camera User Guide is referred to as the Basic Guide, and the Advanced Camera User Guide is referred to as the Advanced Guide. This mark denotes issues that may affect the camera's operation. I_ his mark pracedures. denotes additional topics that complement the basic operating You can use SD* memory cards and MultiMediaCards with this camera. These cards are collectively ca_ledmemory cards in this guide. * SD stands for Secure Digital, a copyr ght protection system. Use of genuine Canon accessories is recommended. This product is desigr_ed to achieve excellent performance when used with genuine Canon accessories. Canon shalI not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this warranty does not apply to repairs arising out of the malfunction of non-genuine Canon accessories, although you may request such repairs on a chargeable basis. l Table of Contents Items marked with a'_ are lists or charts that summarize camera functions or procedures. Please Read ....................................... 5 Operation Restrictions ............................... Safety Precautions .................................. Preventing Malfunctions ............................. 6 9 14 Using the LCD Monitor .............................. LCD Monitor Brightness ............................. Information Displayed on the LCD Monitor 19 21 22 .............. Using the Viewfinder ............................... Indicators ........................................ 25 26 Power Saving Function ............................. Formatting Memory Cards ........................... 27 28 Setting the Wodd Clock ............................. Menus and Settings ................................ Menu List ........................................ 29 31 33 Resetting Settings to Their Default Values ............... 37 Changing the Recording Pixels and Compression (Still Images) Changing Recording Pixels and Frame Rates (Movies) ....... Magnified Close-Up Shooting (Digital Macro) ............ Using the Digital Zoom ............................... Continuous Shooting ............................ Postcard Date Imprint Mode .......................... Using the Self-Timer ............................. '_ Movie Shooting ................................. Shooting Panoramic Images (Stitch Assist) ................ Switching between Focusing Modes ................... 38 40 41 42 43 44 45 47 49 51 Shooting Hard-to-Focus Subjects (Focus Lock, AFLock)...52 Locking theExposure Setting (AELock) ................. 53 Locking theFIash Exposure Setting (FELock) ............ 54 Switching between Metering Modes .................... 55 Adjusting theExposure Compensation .................. 56 Shooting inLong Shutter Mode ......................... 57 Adjusting theTone (White Balance) ..................... 59 Changing thePhoto Effect ............................ 62 Shooting ina My Colors Mode ......................... 63 IS0 Adjusting the ISO Speed .......................... Setting the Auto Rotate Function ........................ Creating an Image Destination (Folder) ................. Resetting the File Number ............................ 69 70 71 72 Q. Magnifying Images ............................... "-" Viewing Images in Sets of Nine (Index Playback) ......... Jumping tc3Images ............................... Viewing Movies .................................... Editing Movies ..................................... Rotating Images in the Display ........................ Playback with Transition Effects ........................ Attaching Sound Memos to Images .................... Automated Playback (Slide Shows) .................... Protecting Images .................................. Erasing All Images ................................. 74 75 76 77 78 80 81 81 83 87 87 Setting the DPOF Print Settings ....................... Setting the DPOF Transfer Settings .................... 88 91 Changing My Camera Settings ......................... Registering My Camera Settings ........................ 94 95 Connecting toaPrinter .............................. Deleting target devices ............................. 98 104 Camera ......................................... When thepower isturned on........................ LCDmonitor ..................................... Shooting ........................................ Shooting Movies .................................. Playback ........................................ Battery/Battery Charger ............................ TVmonitor output ................................. Wireless connection toaprinter ...................... 105 105 106 107 111 112 113 113 114 Battery Handling .................................. 119 Handling theMemory Card......................... 121 Using anACAdapter Kit(Sold Separately) ............. 123 Using anExternally Mounted Flash (Sold Separately) ..... 124 Camera Care andMaintenance ...................... 126 Specifications .................................... 127 I Handling Precautions Test Shots Before you try to photograph important subjects, we highly recommend that you shoot several trial images to confirm that the camera is operating and being operated correctly. P_ease note that Canon Inc., its subsidiaries and affiIiates, and its dJstributors are not liable for any consequential damages arising from any malfunction of a camera or accessory, including memory cards, that results in the failure of an image to be recorded or to be recorded in a way that is machine readable. Warning Against Copyright Infringement Please note that Canon digital cameras are intended for personal use and should never be used in a manner that infringes upon or contravenes international or domestic copyright laws and regulafions. Please be advised that in certain cases the copying of images from performances, exhibitions, or commercial properties by means of a camera or other device may contravene copyright or other legal rights even if the image was shot for personal use. Warranty Limitations This camera's warranty is only effective in the country of sale. If a problem arises while the camera is in use abroad, please convey it back to the country of sale before proceeding with a warranty claim to a Canon Customer Support Help Desk. For Canon Customer Support contacts, please see the Canon Umited Warranty supplied with your camera, __ Video Format Please set the camera's video signal format to the one used in your region before using it with a TV monitor (p. 93). Language Setting Please see the Basic Guide (p. 4) to change the language setting. [o]I_'?_tt_ I _"_'1t'_tt_ OThe wireless function used in this equipment has been approved for domestic use. For use of this function in other countries, please inquire through Canon's Customer Service Center. OFrance: Using the wireless function outdoors is prohibited. OltaIy: If used outside of own premises, general authorization is required. OLatvia: If used outside of own premises, general authorization is required. oThis device may experience signal interference caused by other devices emitting radio waves (microwave ovens, BIuetooth appliances, cordless telephones, etc.). Keep the device away from such devices or do not use the devices at the same time. FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment has very low levels of RF energy that it is deemed to comply without testing of specific absorption ratio (SAR). This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Restrictions for EU/EFTA Countries to R&TTE Directive: BE DK NL GR LU ES _.]_ PT AT HU MT CZ IS SK NO SI CH EE LI DE FI _ Note: - Member states in EU with restrictive out. GB SE IE PL LT CY use for this product are crossed France: Can not be used outdoors. Italy:If used outside of own premises, general authorization Latvia:If used outside of own premises, general authorization is required. is required. Statement on EC directive Contains already Notified Transmitter Module :CM13264 Hereby, Canon Inc,, declares that this CM13264 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Canon Inc. vakuuttaa t&ten ett_ CM13264 tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit_ koskevien direktiivin muiden ehtojen mukainen, Hierbij verklaart Canon Inc, dat het toestel CM 13264 in overeenstemming is met de essentiele eisen en de andere relevante bepalingen van dchtlijn 1999/5/EG Bij deze verklaart Canon Inc. dat deze CM13264 voldoet aan de essentiele eisen en aan de overige relevante bepalingen van Richtlijn 1999/5/EC. Par ta pr6sente Canon Inc, d6clare que CM13264 est conforme aux exigences essentielles et au× autres dispositions pertinentes de la directive 1999/5/CE Par la pr6sente, Canon lnc, declare que ce CM13264 est conforme aux exigences essentieles et au× autres dispositions de la directive 1999/5/CE qui lui sont applicables H_rmed intygar Canon tnc.attderma CM13254 star1 6verensst_mmelse reed dev_sentliga egenskapskrav och6vriga relevanta best&immelser sore framg_r avdirektiv 1999/5/EG. Undertegnede Canon lnc.erklaerer hewed, atf_lgende udstyr CM13254 overholder devaesentlige krav og_vrige relevante krav direktiv 1999/5/EF Hiermit erkl&rt Canon Inc., dass sich dieser/diese/dieses CM13264 in0bereinstimmung mitdengrundlegenden Anforderungen undden anderen relevanten Vorschriften derRichtlinie 1999/5/EG befindet". (BMWi) Hiermit erkl&rt Canon Inc, die0bereinstimmung desGer_tes CM13264 mitdengrundlegenden Anforderungen unddenanderen relevanten Fesflegungen derRichtlinie 1999/5/EG. (Wien) METHNFIAPOY[A Canon Inc.AH^ONEI OTICM13264 [YMMOPCDNETAI FIPO£ TI_OY_IDAEI£ AIqAITH[EI£ KAITI[ AOIFtE[ [XETIKE[ AmATA_--EI[ TH[OAHFIA[ 1999/5/EK Conlapresente Canon Inc,dichiara chequesto CM13264 conforme airequisiti essenziati edallealtredisposizioni pertinenti stabilite daHa direttiva 1999/5/CE. Permedio delapresente Canon Inc,declara queelCM13264 cumple conlosrequisitos esenciales ycualesquiera otras disposiciones aplicables oexigibles delaDirectiva 1999/5/CE Canon Inc,declara queesteCM13264 est& conforme corn os requisitos essenciais e outras disposig6es da Directiva 1999/5/CE. Spole_nost Canon Inc, timto prohla_uje, 2e CM 13264 splfiuje z_kladni po2adavky a dal,_i pfislu_n6 ustanoveni Direktivy 1999/5/EC. Sellega kinnitab Canon Inc,, et see CM13264 vastab direktiivi 1999/5/EC p6hilistele n6udmistele ja muudele asjakohastele m_rustele. Ar _e, Canon Inc., apstiprina, ka CM13264 atbilst DirektTvas 1999/5/EK galvenaj_m pras_m un citiem t_s nosacTjumiem. _iuo, Canon Inc., parei_kia, kad {_is CM13264 atitinka pagrindinius Direktyvos 1999/5/EB reikatavimus ir kitas svarbias nuostatas. Alulirott, Canon Inc.,kijetenti, hogy ajelen CM13264 megfelel az 1999/5/EC ir&nyelvben meghat&rozott alapvet6 k6vetelm6nyekne 6segy6b vonatkoz6 el6ir&soknak. Hawnhekk, Canon Inc., tiddikjara li CM13264 josserva IJhtigUiet essenzjali u dispo±izzjonijiet relevanti ohra tad-Direttiva 1995/5/KE. Canon inc. niniejszym o_wiadcza, 2e CM13264 spe_nia zasadnicze wymogi oraz inne istotne postanowienia dyrektywy 1999/5/EC. S tern Canon tnc. izjavlja, da je ta CM13264 v skiadu z osnovnimi zahtevami in ostalimi ustreznimi predpisi Direktive 1999/5/EC. Spolodnost' Canon tnc. t_mto vyhlasuje, 2e CM 13264 sp[fia z&kladn6 po2Jadavky a d'al_,ie prJslu_n6 ustanovenia Direktivy 1999/5/EC. C HaCTORLL_14_ _OKyMeHTCanon Inc. p,e_ap_pa, ,_e CM13264 e B c_,rflacl4e c OCHOBHidTe H3FICKBaH_4_ 14C'bOTBeTHI4Te nOCTaHOBYleHI4_ Ha _peKT_Ba 1999/5/EC. Prin prezenta, Canon inc. declar_ c_ aceet CM13264 este conform cu cerinl;ele principale gi cu cetelalte prevederi relevante ale Directivei 1999/5/EC. I_bu beige ile Canon Inc., bu CM13264'in 1995/5/EC YSnetmeli_i esas gereksinimledne ve dialer ._artlanna uygun oldu_unu beyan eder. MADE IN JAPAN @Nl18 • Before using the camera, please ensure that you read the safety precautions described below and in the "Safety Precautions" section of the Basic Guide. Always ensure that the camera is operated correctly. eThe safety precautions noted on the following pages are intended to instruct you in the safe and correct operation of the camera and its accessories to prevent injuries or damage to yourself, other persons and equipment. Be sure you fully understand them before reading the rest of the manual. OEquipment refers to the camera, battery charger, wireless print adapter or separately sold compact power adapter. OBattery refers to the battery pack. • Do not aim the camera directly into the sun or at other intense light sources that could damage your eyesight. • Store this equipment infants. out of the reach of children and • Wrist strap: Placement of the strap around the child's neck could result in asphyxiation. • Memory card: Dangerous if accidentally swallowed. If this occurs, contact a doctor immediately. • Do not attempt to disassemble or alter any part of the equipment that is not expressly described in this guide. • To avoid the risk of high-voltage electrical shock, do not touch the flash portion of the camera if it has been damaged. • Stop operating the equipment immediately if it emits smoke or noxious fumes. • Do not allow the equipment to come into contact with, or become immersed in, water or other liquids. If the exterior comes into contact with liquids or salt air, wipe it dry with a soft, absorbent cloth. Continued use of the equipment may result in fire or electrical shock. Immediately turn the camera power off and remove the camera battery or unplug the power cord from the power outlet. Please consult your camera distributor or the closest Canon Customer Support Help Desk. lO • Do not use substances containing alcohol, benzine, thinners or other flammable substances to clean or maintain the equipment. • Do not cut, damage, alter or place heavy items on the power cord. • Use only recommended power accessories. • Remove the power cord on a regular periodic basis and wipe away the dust and dirt that collects on the plug, the exterior of the power outlet and the surrounding area. • Do not handle the power cord if your hands are wet. Continued use of the equipment may result in fire or electrical shock. • Do not place the battery near a heat source or expose it to direct flame or heat. • The battery should not be immersed in water or sea water. • Do not attempt to disassemble, alter or apply heat to the battery. • Avoid dropping or subjecting the battery to severe impacts that could damage the casing. • Use only recommended battery and accessories, Use of battery not expressly recommended for this equipment may cause explosions or leaks, resulting in fire, injury and damage to the surroundings, tn the event that a battery leaks and the eyes, mouth, skin or clothing contact these substances, immediately flush with water and seek medical assistance. • Disconnect the battery charger and compact power adapter from the camera or the wireless print adapter and the power outlet after recharging or when they are not in use to avoid fire and other hazards. • Do not place anything, such as tablecloths, carpets, bedding or cushions, on top of the battery charger while it is charging. Continued use over a long period may cause the units to overheat and distort, resulting in fire. 11 • Use only the specified battery charger to charge the battery. • The battery charger and compact power adapter are designed for exclusive use with your camera, Do not use it with other products or batteries. There is a risk of overheating and distortion which could result in fire or electrical shock. • Before you discard a battery, cover the terminals with tape or other insulators to prevent direct contact with other objects. Contact with the metallic components of other materials in waste containers may lead to fire or explosions. • Do not trigger the flash in close proximity to human or animal eyes, Exposure to the intense light produced by the flash may damage eyesight, In particular, remain at least one meter (39 inches) away from infants when using the flash. • Keep objects that are sensitive to magnetic fields (such as credit cards) away from the speaker of the camera. Such items may lose data or stop working. • If you wish to use a wireless connection inside an aircraft or hospital, always follow the instructions of the airline or hospital staff. The camera emits electromagnetic waves which may affect instruments, medical devices and other sensitive equipment. m [.,_ETr[tB31'_, 12 • Do not store the equipment in humid or dusty areas. • Do not allow metal objects (such as pins or keys) or dirt to contact the charger terminals or plug. Such conditions could lead to fire, electrical shock or other damage. • Avoid using, placing or storing the equipment in places subject to strong sunlight or high temperatures, such as the dashboard or trunk (boot) of a car. • Ensure that the battery charger or the compact power adapter are plugged into a power outlet of the specified rating, not over the specified rating. Do not use if the power cord or plug are damaged, or if not fully plugged into the outlet. • Do not use in locations with poor ventilation. The above-mentioned can cause leakage, overheating or explosion, resulting in fire, burns or other injuries. High temperatures may also cause deformation of the casing. • When not using the camera for extended periods of time, remove the battery from the camera or battery charger and store the equipment in a safe place. The battery can run down. • If the AC adapter kit or battery charger is connected to, for example, an electronic transformer for travel abroad, trouble with the camera may result, so please do not use such a device. • Do not operate the flash with dirt, dust or other items stuck to the surface of the flash. • Be careful not to cover the flash with your fingers or clothing when shooting. The flash may be damaged and emit smoke or noise. The resulting heat build-up could damage the flash. • Do not touch the surface of the flash after taking several pictures in rapid succession. Doing so could result in burns. 13 I _,_:IIT_j LvA h'l It't_'l_ • Never place the camera in close proximity to electric motors or other equipment generating strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions corrupt image data. or • When moving the equipment rapidly between hot and cold temperatures, you can avoid condensation by placing the equipment in an airtight, resealable plastic bag and letting it adjust to temperature changes slowly before removing it from the bag. Moving the equipment rapidly between hot and cold temperatures may cause condensation (water droplets) to form on its external and internal surfaces. • Stop using the camera immediately. Continued use may damage the equipment. Remove the memory card and battery or compact power adapter from the camera and wait until the moisture evaporates completely before resuming use. 14 I BeforeUsingtheCamera-The Components Guide Front View ®®®® o (!) AN OUT (Audio/Video output) Terminal (p. 93) (_) DIGITAL Terminal ® Terminal Cover _) ® ® (_ ® ® Wrist Strap Mount Microphone (p. 81) AF-assist Beam (p. 33) Red-Eye Reduction Lamp (Basic Guide p. 9) Self-Timer Lamp (p. 45) Viewfinder Window (p. 25) Flash (Basic Guide p. 9) Lens (_ Wireless Lamp (p. 26) 15 How to Attach theWrist Strap* How to Open the Terminal Cover * When carrying the camera by the strap, be carelul net to swing the camera or catch it on other items. Back (_) (_ ® (_) ® ® (_ 16 View LCD Monitor (p. 19) Viewfinder (p. 25) Tripod Socket DC Coupler Terminal Cover (p. 123) Memory Card Slot/Battery Cover (Basic Guide p. 2) Speaker Battery Compartment (Memory Card/Battery Compartment) Operation Panel ® ® @ m o t- O #a 3 (_) Indicators (p. 26) ® Power Button (Basic Guide p. 5) ® Power Lamp ('4_ Zoom Lever (p. 74, Basic Guide p. 8) Shooting: [] (Wide Angle)/E(ll3 (Telephoto) Playback: _ (Index)/ O. (Magnify) ® Shutter Button (Basic Guide p. 5) ® Mode Switch (Basic Guide pp. 5, 6) _,,,_ (Print/Share) Button (Basic Guide p. 14) ® DISP. (Display) Button (p. 19) ® FUNC./SET (Function/Set) Button (p. 31) _) MENU Button (p. 32) (_) _ (Macro)/JA (Infinity)/ ÷ Button (Basic Guide p. 10) @ ISO (ISO Speed)/._do (Jump)/ ,1_ Button (pp. 69, 76) _- (Flash)/ '_ Button (Basic Guide p. 9) (_ /_ (Single Image Erase)/O-Ij (Continuous)/_.) (Self-timer)/ Button (pp. 43, 45, Basic Guide p. 11) 17 Wireless Print Adapter (!) DC IN (power) Terminal (p. 99) (_ SETUP button (p. 103) _) Wireless Lamp (p. 26) 18 I BeforeUsingtheCamera-BasicOperations Press 0" eThe display mode changes as follows with each press. Shooting Mode Playback Mode (0 or ',_) (r_) (_t:iii: i rmati°n) (Information Standard View) C_ff _t_ _ Detailed _ Sta o !i t- ard _-- No !formation =o • In the shooting modes, the shooting information displays for approximately 6 sec. when a setting is changed, regardless of the selected display mode. , ii i iii ii _ ii _: • The LCD monitor on or offsetting is retained even after the camera power is turned off. • The LCD monitor does not shut off in the L_] I_, [] or bll mode, • The LCD monitor will not switch to the detailed display in the index playback mode (p. 75). 19 Using the Clock You can display the current date and time for a 5-second* interval using the following two methods. * Default setting Method 1 Hold the FUNC./SET Method 2 button down while turning on the power. In a shooting mode, hold the FUNC./SET button down. If you hold the camera horizontally, it displays the time. If you hold it vertically, the time and date display. However, if you hold the camera vertically and use method 1 to display the date and time, the time will be initially displayed in the same way as when the camera is held horizontally. • You can change the display color by pressing the _. or .l, button. eThe clock display will cease when the display interval is over or when you operate the FUNC./SET, MENU or shutter button or the mode switch. eThe clock's display interval can be changed in the [] menu (p. 35). 2O (Set up) LCD Monitor Brightness Settings The brightness of the LCD monitor can be changed in the following two ways. OChanging Settings Using the Set up Menu (p. 35) OChanging Settings Using the DISP. Button (Quick-bright LCD Function) You can set the LCD monitor to the brightest setting regardless of the option selected in the Set up menu by pressing the DISP. button for more than one second*. - To restore the previous brightness setting, press the DISP. button for more than one second again. - The next time you turn on the camera, the LCD monitor will be at the brightness setting selected in the Set up menu. * You cannot change the brightness of the LCD monitorwith this function if you have already set it to its highest setting in the Set up menu. Night Display When shooting in dark conditions, the camera automatically brightens the LCD monitor to suit the brightness of the subject*, making it easier to frame the subject. * Noise will appear, and the movements of the subject will appear irregular on the LCD monitor. The recorded image will not be affected. The brightness of the image displayed in the monitor, and the brightness of the actual image recorded will be different. m o t- ¢) 3 21 Shooting Information (Shooting ]* Spot Frame [] mode) 'l_l_ []1 _ ISO Speed (p. 69) * AF Frame (p. 51) mwmmM Shooting Method (pp. 43, 45) • Low Battery (p. 119) Ea_] Macro!Infinity (Basic Guide p.10) Grid Lines*(p. 33) _WBIOHrU Flash (BasioGuide p. 9) mBB A_o Rotate(p. 70) • (Red)* MovieRecording (p. 47) filliflWireless Connection Movies(See.):RemainingElapsedTime I:E]ral_D[]m E_mwDmmw []* []* I_i*W* ShootingMode (pp. 41, 47, 49, 63, Basic Guidepp. 7, 8) W.W ExposureCompensation(p. 56) li...mi Long ShutterMode (p. 57) E:II* AE Lock (p. 53) .71) _'1[] [] Metering Mode(p. 55) tan[:] ,?.ompression(p. 39) r_Mrd --tameRate(Movie)(p. 40) _ww_l_mmm ODO_mn Recording Pixels (pp. 38, 40) White Balance (p. 59) [] (Red)* CameraShake Warning (p. 106) _he shutterspeed will also display when Lhe[] displays.) mmmE[] Photo Effect (p. 62) mmmmmmmll_ll My Colors (p. 63) -22 ExposureShift Bar (Movie)(p. 49) * Appears even if the LCD monitor is set to Standard display. Iftheindicator blinks orange andthecamera shake icon[] displays, itindicates there isinsufficient illumination anda slowshutter speed willbeselected. Raise theISOspeed (p.69)orselect asetting other than[] (flash off),orattach thecamera toatripod orother device. Playback Information (Playback Mode) Standard { wi_reless C°eeec'[i°n(p 101) 1 tm, ¢) [] Protection Status (p. 87) -- Total numberof images -- Compression (Still Images) (p. 39) Displayedimage number RecordingPixels (StillImages)(p. 38 [] Movie (p. 40) 23 Detailed []W. W __ ExposureCompensation(p. 56) [] Flash (Basic Guide p. 9) B_3 Macro/Infinity (Basic Guide p. 10) mmmE[] Photo Effect (p. 62) wmmmmmmmm E_mmDmmW [] MyColors (p. 63) ShootingMode(pp. 41, 47, 49, 63, Basic Guidepp. 7, 8) mmm Metering Mode(p. 55) gi.m* _DDO_mD _ongShutterMode (p. 57) White Balance (p. 59) File Size [] ISOSpeed (p. 69) mmlitilmmM RecordingPixels(Movies) (p. 40) FrameRate (Movies) (p. 40) The following information _] -24 Transfer to computercomplete (Software & WirelessGuide) RecordingPixels(StillImages)(p. 38) Movie Length (Movies)(p. 47) may also be displayed with some images. [] A soundfile in a format other than the WAVEformat is attachedor the file format is not recognized. -_ JPEG image not conformingto Design rulefor Camera File System Standards [] RAWimage [] Unrecognizeddata type Information for images shot on other cameras may not display ............................................................ _H_jIHHHHHHHHHHHHHHHHH_j_HHHH_mHHHHHHHHHHHHH_jIHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH correctly. Histogram Function The histogram is a graph that allows you to judge the brightness of the shot image. The greater the bias toward the left in the graph, the darker the image. The greater the bias toward the right, the brighter the image. If the image is too dark, adjust the exposure compensation to a positive value. Similarly, adjust the exposure compensation to a negative value if the image is too bright (p. 56). Sample Histograms Dark Image Balanced Image Bright Image The viewfinder can be used to conserve power by turning the LCD monitor off (p. 19) while shooting. o 3 I -- Shows the center of the image I Viewfinder 25 The indicators of the camera and the wireless print adapter light or blink in the following situations. Camera eUpper Indicator Green: Blinking Green: Orange: Blinking Orange: eLower Indicator Yellow: Blinking Yellow: eWireless Lamp Ready Image (when Ready Ready to shoot recording/reading/erasing/transferring connected to a computer) to shoot (flash on) to shoot (camera shake warning) Macro mode/infinity mode/AF lock mode Focusing difficulty (camera beeps once) Blue: Blinking Blue (slowly): Standing by for printing or transfer* Wireless connection active/Currently registering target device Blinking Blue (rapidly): Data transfer underway * When the wireless connection is extremely weak, the wireless lamp blinks, as does the T icon on the LCD monitor. (p. 95). Wireless Blue: 26 Print Adapter Wireless connection active Blinking Blue (slowly): Wireless connection on standby Blinking Blue (rapidly): Data transfer underway Blinking Blue and Orange: Currently registering target device Orange: Registration failed. Blinking Orange: Error* * An irregularity occurred in the wireless print adapter. Disconnect the wireless print adapter from the printer, then reconnect it. When using the compact power adapter, pull out the power cord, disconnect the wireless pdnt adapter from the printer, reconnect it, then reinserLthe power cord. if the lamp blinks orange frequently, bring the camera to a Canon Customer Support Help Desk. t t 't'l'T il This camera is equipped with a power saving function. The power will shut off in the following circumstances. Press the power button again to restore power. Shooting Mode Powersdownapproximately3 minutesafterthe last control is accessedon the camera.The LCD monitorautomaticallyturns off 1 minute.1after the last controlis accessedeven if [AutoPowerDown] is setto [Off]. Pressany buttonotherthan the power buttonor changethe cameraorientationto turn the LCD monitorback on. Playback Mode Powersdown approximately5 minutesafter the Connected to a Printer .2 last control is accessedon the camera. *1Thistime can be changed. *2Whenconnecting to a printer using the interface cable provided. • Under the conditions below, the power saving function cannot be used. - During automatic slideshow playback - During wireless connection (Playback Mode) - When connecting to a computer using the interface cable provided • The power saving function settings can be changed (p. 35). & o t- O 27 You should always format a new memory card or one from which you wish to erase all images and other data. 28 When traveling abroad, you can record images with local dates and times simply by switching the time zone setting if you pre-register the destination time zones. You can enjoy the convenience of not having to switch the Date/Time settings. Setting [] the Home/World Time Zones (Set up) Menu _ [Time Zone] See Menus and Settings (p. 32). _ @. m, €,o o Use the ÷ or ÷ button to select a home time zone eTo set the daylight saving option, use the ÷ or _1, button to display []. The time will advance by 1 hour. 29 Use the ÷ or + button to select tion time zone_ @. eAs in Step 3, you can set the daylight saving option. Use the * World], or and button the ÷ or ii_ uP) Use select the Menu_[Time ÷ or [] + button I to select to the Destination (Set Time D_erencefrom the HomeTime Zone + button Switching W a destina- [Home/ to select [] Time Zone Zone]_@. to _0. eTo change the destination time zone, use the FUNC./SET button. If you change the date and time when the World option is selected, the Home date and time will also change automatically. 3O Menus are used to set the shooting and playback settings as well as such camera settings as the date/time, electronic beep and wireless connection. The following menus are available. eFUNC. Menu eRec., Play, Wireless, FUNC. Set up and My Camera Menus Menu This menu sets many of the common shooting functions. ® @ <_) Slide the mode switch to 0 (_) Press the FUNCJSET ® or ,m. button. Use the @ or 4, button to select a menu item. Some items may not be seIectabIe in some shooting modes. _) Use the 4" or ,_ button to select an option for the menu item. ® You can select further options with the MENU button for some options. After selecting an option, you can press the shutter button to shoot immediately. After shooting, this menu will appear again, allowing you to adjust the settings easily. Press the FUNCJSET button. 31 Rec., Play, Wireless, Set up and My Camera Menus Convenient menus. settings for shooting or playback can be set with these [] [] -- [] (Play) (Wireless)Menu (Set up) Menu (My Camera) Menu ® ® @ (_) You can switch betweenmenus with the*or*button when this part is selected. @ k k ® (_ ('_<_"_') • This example shows the Rec. menu. • In playback mode, the Play menu displays. (_ Press the MENU button. ® Use the * or 4, button to switch between menus. You can also use the zoom lever to switch between menus. ® Use the ÷ or _1, button to select menu items. Some items may not be setectable in some shooting modes. {_ Use the ÷ or * button to select an option. • Menu items followed by an ellipsis (...) can only be set after pressing the FUNC./SET button to display the next menu. Press the FUNC./SET button again to confirm the setting. ® 32 • When selecting items from the [] (Wireless) menu, the method of operation depends on the menu item. Please confirm precise instructions on the appropriate operational procedure page. Press the MENU button. IL'A I_fll!l ImI_"_: FUNC. Menu Menu Item The [cons shown below are the default settings. Page Menu Item Basic [] [] p.5 [] My Colors p. 63 p. 47 [] Metering Mode p. 55 [] Compression p. 39 p. 40 Shooting Mode Movie Mode Exposure Compensation [] [] Page p. 56 Long Shutter Mode p. 57 [] Frame Rate (Movie) White Balance p. 59 [] Recording Pixels(StillImage) p. 38 Photo Effect p. 62 [] RecordingPixels(Movie) Rec= Menu p. 40 o * Default setting Menu Item Options On*lOft p. 51 Self-timer [] 10 seconds*/[] 2 seconds/[] Custom Timer (Delay: 0-10", 15, 20, 30 sec.) (Shots: 1-3"-10) p.45 On*lOft DigitalZoom On/Off* (On in standard movie mode.) Review Off/2"-10 seconds/Hold Save Original Grid Lines On/Off* On/Off* Date Stamp Off*/Date/Date Long Shu_er On/OfP t- Page/Topic AiAF AF-assist Beam & O 3 p. 42 Basic Guide p. 6 p. 65 You can displaygrid lines (splits screen into nine areas) to make it easier to judge the horizontaland vertical alignmentof a photographic subject and to make compositioneasier. The lineswill not be recordedin the images. & Time p. 44 p. 57 33 StitchAssist m Left to right*/ [] Rightto left p. 49 Play Menu Menu Item Page [] Protect p. 87 [] Rotate p. 80 [] Sound Memo p. 81 [] Erase All p. 87 [] SlideShow p. 83 [] PrintOrder p. 88 [] Transfer Order p. 91 [] Transition p. 81 Wireless Menu Menu Item * Default setting Options ConneddDiscennec_ Reg. Target Device p. 102, Software & Wireless Guide Delete Registration Auto Transfer p. 104, Software & Wireless Guide On*lOft Set up Menu Menu Item Mute 34 Page/Topic p. 100, Software & Wireless Guide Software & Wireless Guide * Default setting Options On/Offf Page/Topic Set to [On] to silence the start-up, operation, self-timer and shutter sounds all at once. However, warnings still sound even when the mute is set to On. (Basic Guide p. 5) ,lume Off/1/2"/3/4/5 Adjusts the volumeof the start-up sound, operation sound, self-timer sound, shuttersound and playback sound. The volumecannot be adjusted if [Mute] is set to [On]. Start-upVoL Adjusts the volumeof the start-up sound whenthe camerais turned on. OperationVoL Adjusts the volumeof the operation sound that playswhen any button other than the shutterbutton is Dressed. SelftimerVol. Adjusts the volumeof the self-timer sound played2 sec. before the shutter is released. ShutterVolume Adjusts the volumeof the sound playedwhen the shutterreleases.The shutter sound does not play when a movieis recording. PlaybackVol. :D Brightness Usethe ÷ or 4* buttonto adjust the brightness. Ifyou press the 4" or 4, button,the display returns to the Set up menu.You can check the brightnesson the LCD monitorwhile you are adjustingthe setting. Auto Power Down On*/Off Sets whether or not the camera automatically powersdown after a set Deriedof time elapses without the camera being operated. Display Off 1g sec.120sec./ Sets the lengthof time before the LCD 30 sec./1 min.*/ monitorturns off when no camera 2 min./3min. operation is performed. wer Saving t@l D} p. 27 Home*/World Lterl-ime _ck Display o Adjusts the volumeof movie sounds and sound memos. -7-0*-+7 ne Zone @@ p. 29 Basic Guide p.4 0-5"-10 sec./20 sec./30sec./1 min./2 min./3 min. p. 20 35 Format p. 28 File Numbering Auto Reset/ Continuous* p. 72 Create Folder p. 71 ................................ cieaies a folder foi [fie next shooiing........... session. ark Youcan also set a creationtime. day/ Auto Rotate On*lOft p. 70 Language Basic Guide p. 4 Video System NTSC/PAL p. 93 Reset All p. 37 My Camera Menu Menu Item * Default setting Available Settings Theme Selects a commonthemefor each MyCamera settings item. Start-up Image Sets theimagedisplayedwhen the camerapower isturnedon. Start-up Sound Sets thesound playedwhenthecamera poweris turnedon. OperationSound Sets thesound played when any buttonotherthan theshutterbuttonis pressed. SelftimerSound Setsthesound played2 seconds beforetheshutter releasesin self-timer mode. Shutter Sound Sets thesound playedwhen the shutter buttonis _ressed.There is noshuttersound for movies. My Camera MenuContents 36 [] (Off)/[]*/[] / [] Page p. 94 [] (Set up) Menu _ [Reset All]. See Menus and Settings (p. 32). Select [OK] and press _. • Settings cannot be reset when the camera is connected to a computer or to a printer. • The following cannot be reset. - Shooting mode - Item chosen from the [] (Wireless) menu - The [Time Zone], [Date/Time], [Language] and [Video System] options in the [] (Set up) menu (pp. 35, 36) - White balance data recorded with the custom white balance function (p. 60) - Colors specified in the [Color Accent] (p. 66) or [Color Swap] (p. 67) modes of My Colors. - Newly added My Camera settings (p. 95) _c° _, t-=,, 0 ._ 37 l Shooting Approximate Values for Recording Pixels Recording Pixels Purpose 2592 × 1944 pixels High Print larger than A4-size prints* 210 _, × 297 mm (83 × 11.7in.) Print largerthan Letter-size prints* 216 × 279 mm (8.5 × 11 in.) (Medium 1) 2048 × 1536 pixels Print up to A4-size prints*210 × 297 mm (8.3 × 11.7 in.) Print up to Letter-size prints* 216 × 279 mm (8.5 × 11 in.) [] (Medium 2) 1600 × 1200 pixels Print postcard-size prints 148 × 100 mm (6 × 4 in.) Print L-size prints 119 × 89 mm (4.7 × 3.5 in.) [] (Small) [] [] (Large) [] [] 640 × 480 pixels Postcard Date Imprint Mode) * Paper sizes _' Low Send images as e-mail attachments Shoot more images 1600 ×1200 pixels vary according When printing to postcards (p. 44). to region. Approximate Values Compression [] Superfine [] Fine [] Normal for Compression Settings Purpose High Quality Shoot higher quality images _ Shoot normal quality images ,i r Normal Shoot more images • See Image Data Sizes (Estimated) (p. 132). • See Memory Cards and Estimated Capacities (p. 131 ). o o 39 You can change the recording pixels and frame rate when the movie mode is set to [] (Standard) or [] (My Colors). : (Frame *Default Rate). See Menus and Se.,ngs 31 . setting. eUse the ÷ or ,_ button to select a recording pixels/frame rate and press the FUNC./SET Recording Pixels button. and Frame Rates Recording Pixels Frame Rate (frames/sec.) [] [] [] [] Standard [] 640 × 480 pixels - 0 0 [] My Colors [] 320 × 240 pixels - 0 0 [] Fast Frame Rate [] 320 × 240 pixels 0 [] Compact [] 160 × 120 pixels - O * Frame rates indicate the number of frames recorded or played back each second. The higher the frame rate, the smoother the appearance of motion. * The recording pixels and frame rate are fixed in the [] and [] modes. See • 40 Image See Memory Data Sizes Cards (Estimated) and Estimated (p. 132). Capacities (p. 131 ). You can shoot a subject 3 - 10 cm (1.2 - 3.9 in.) from the end of the lens at the maximum wide angle setting. With the digital zoom, the image area is 9 x 7 mm (0.36 x 0.27 in.) at maximum zoom (approximately 4 times). See en i_ii,_,i'iiiii,_ _oo_o,t so_ioo. ,li'iiiii!ii_liii h ......_ lever _Q h and n shoot, I fv, ww, ..................................................................................... 41 You can shoot zoomed images using the combined digital and optical zooms. eStills: zoom up to approximately 12 times eMovies (Standard): zoom up to approximately 12 times ............. li See en _ Press the zoom iever toward E40and shoot. eThe combined digital and optical zoom setting will display on the LCD monitor. eWhen you press the zoom lever toward E(b3,the zoom stops when the lens reaches the maximum optical telephoto setting (when shooting still images). Press the zoom lever toward E@3again to activate the digital zoom and further zoom the image digitally. ePress the zoom lever toward [] to zoom out. Images become coarser the more they are digitally zoomed. 42 [][][][][]mmBmm In this mode, the camera shoots continuously button is held down. while the shutter If you use the recommended memory card*, you can shoot continuously (smooth continuous shooting) at a set shooting interval until the memory card is full (p. 131 ). *Recommended Memory Card Super high speed SDC-512 MSH memory card (sold separately) immediately after a low level format (p. 28). • This reflects standard shooting criteria established by Canon. Actual results may vary according to the subject and shooting conditions. • Even if continuous shooting suddenly stops, the memory card may not be full. O_ =r o Press the _ to display []. o Shoot. eThe camera wilI continue to record successive images while the shutter button is fully pressed. Recording will cease when the shutter button is released. To Cancel Continuous Shooting Press the D__button twice to display i. • The interval between shots lengthens when the built-in memory of the camera fills. • If the flash is used, the interval between shots lengthens because the flash must charge. 43 You can shoot images with the optimal settings for postcards by composing them inside the print area (width-to-height ratio of approximately 3:2) shown on the LCD monitor. Embedding the Date in the Image You can embed the date in image data when [] Date Imprint Mode) is selected. [Date & Time]. • LCD Monitor Display I1_]: [Date]/[Date 44 & Time] Data (Postcard You can set a 10 sec. ([_) or 2 sec. ([J) delay, or a custom delay time and the number of shots ([I Custom Timer), for shooting after the shutter button is pressed. Press the _ button to display [I, [] or []. (n Shoot. eWhen the shutter button is pressed fully, the self-timer will activate and the self-timer lamp will blink. When using redeye reduction, the self-timer lamp will blink and then stay lit for the last 2 seconds. To Cancel the Self-Timer Press the _) button to display []. You can change the self-timer sound (p. 36). Changingthe Self-Timer CountdownTime ([]/[]) [] (Rec.) Menu_[Self-timer]_[] or []. See Menus and Settings (p. 32). eThe following occurs with each option. - []: 2 seconds before the shutter releases, the selftimer sound and lamp will speed up. - [] :The self-timer sound will play when the shutter button is pressed and the shutter will release 2 seconds later. _" o Changing the Delay Time and Number of Shots ([J). You can change the delay time (0-10, 15, 20, 30 sac.) and number of shots (1-10). These settings, however, cannot be set for the Stitch Assist mode, movie mode or My Colors modes. : eThe se f-t mer sound w behave as follows. - The self-timer sound will start 2 seconds before the specified delay for shootIng is over. - If multiple shots have been specified for the [Shots] _ _ _ _k_ _ _ W l option, the sound will play for the first shot only. If the [Shots] option is set to 2 or more shots, the following occurs. - The exposure and white balance are locked at the settings selected for the first shot. - If the flash is used, the interval between shots lengthens because the flash must charge. - The interval between shots lengthens when the builtin memory of the camera fills. - Shooting will automatically cease if the memory card becomes full. 46 The following four movie modes are available. You can select the recording pixels and frame rate and record until the memory card is full (when a super high-speed memory card is used, such as the recommended SDC-512MSH). The digital zoom can be used while shooting in this mode. (p. 42) • Recording Pixels: [] (640 × 480), [] • Frame Rate: [] (30 frames/sec.), • Maximum Size: 1 GB/movie [] (320 × 240) (15 frames/sec.) !I1 hoto0ra Use this mode to record fast moving subjects, • Recording • Frame Pixels: Rate: • Maximum [] [] such as in sports o (320 × 240) (60 frames/sec.) Clip Length: 1 minute Since the recording pixels are low, this mode is convenient for sending movies as e-mail attachments or when the memory card capacity is low. • Recording Pixels: • Frame Rate: [] • Maximum [] (160 × 120) (15 frames/sec.) Clip Length: 3 minutes You can change image colors and then shoot (p. 63). As with the Standard mode, you can also select the recording pixels and frame rate and record until the memory card is full (when a super highspeed memory card is used, such as the recommended SDC512MSH). • Recording Pixels: [] (640 × 480), [] • Frame Rate: [] (30 frames/sec.), • Maximum Size: 1 GB/movie [] (320 x 240) (15 frames/sec.) • The maximum recording time will vary according to the capacity of the memory card you use (p. 13!). 47 • Before recording, you can set the AE lock (p. 53) and exposure shift. 1. Press the IS0 button. The exposure will lock (AE lock) and the exposure shift bar will appear on the LCD monitor. 2. Use the ÷ or ,_ button to adjust the exposure. Press the IS0 button again to release the setting. Also, the setting will be canceled if you press the MENU button or change the white balance, photo effect or shooting mode settings. • QuickTime 3.0 or later is required to play back movies (Data type: AVt/Compression method: Motion JPEG) on a computer. QuickTime (for Windows) is included on the Canon Digital Camera Solution Disk. On the Macintosh platform, this program is standard with Mac OS X or later. Stitch Assist can be used to shoot overlapping images that can later be merged (stitched) to create one panoramic image on a computer. ping seams of sevThe ovedaperal adjacent images can be joined into a single panoramic image. [] (Rec.) Menu_[Stitch Assist]. See Menus and Settings (p. 32). 49 Use PhotoStitch, a supplied software program, to merge the images on a computer. 5O mDF ImWDm You can select between the following two focusing modes according to the AiAF setting. I (No frame) [] [] IThe camera detects the subject and highlights the AF On frames, from 9 available points, that it will use to determine the focus. I IThe camera focuses using the center AF frame. This is Off convenient for focusing on a specific part of a subject with greater certainty. (Rec.) Menu _ [AiAF] _ [On]/[Off], _r o See Menus and Settings (p. 32). o • The focus is locked to the center AF frame when the digital zoom is used. • The AF frame appears as follows (when the LCD monitor is on) when the shutter button is pressed halfway. - Green: Shooting preparations complete - Yellow: Focusing difficulty (AiAF set to [Off]) 51 It may be difficult to focus on the following types of subjects. eSubjects with extremely low contrast to the surroundings eScenes with a mixture of near and far subjects. eSubjects with extremely bright objects at the center of the composition eSubjects that are moving quickly eSubjects through glass: Try to shoot as close to the glass as possible to reduce the chances of light reflecting back off the glass. Shooting with the Focus Lock The focus lock can be used in any shooting mode. e, .............. same focal distance as the main subject centered in the viewfinder or in the AF frame displayed on the LCD is monitor. to composeth; shotaS ....... esire Shooting an with pre the shu tte button y. ..................... the AF Lock The AF lock can be used in the r_, [_] [] or [] mode. iu;, o"t"eLeom"iior.............................. _i, Ai ame th_ same focal distance as the centered in the AF frame. the 52 _/,A button. e_ main he.............. subject is cameraio composethe Shotas des! red a nd shoot, .............................................................................. To Release the AF Lock Press the _/_1, button. • When shooting with the focus lock or AF lock using the LCD monitor, setting [AiAF] to [Off] (p. 33) makes shooting easier since the camera focuses using the center AF frame only. • The AF lock is convenient because you can let go of the shutter button to compose the image. Moreover, the AF lock is still effective after the picture is taken, allowing you to capture a second image with the same focus. 3_ra[]_qea[][] You can set the exposure and focus separately. This is effective when the contrast is too strong between the subject and background or when a subject is backlit. _ Turn you on the wish LcD to lock monitor. the .............................................................. exposure setting. _i _ Press the shutter button haifway and press ........... the ISO button, • The[] icon w,Idisptay. _ eO_aim thecamerato composetheshotas ,e ,e,..,pre t hut utton 1,. ........ To Release the AE Lock Press the ISO button. 53 • AE lock can also be set and released in ,I mode (p. 49). • You can use the FE lock when using the flash. You can lock the flash exposure so that the exposure settings are correctly set regardless of the composition of your subject. ni,ias. ...... on). you wish to lock the IS0 button. the • The flash will pre-fire and [] !51, Re:aim i: the camera desire To Release the FE Lock Press the IS0 button. 54 ass flash exposure setting. will display. to compose t he shutter the button sho* as y, ..................... FUNC. Menu _ []* (Evaluative). See Menus and Settings (p. 31). *Default setting. eUse the ÷ or 4' button to select the metering mode and press the FUNC./SET button. Metering Methods [] Evaluative Appropriate for standard shooting conditions, including backlit scenes. The camera divides images into several zones for metering. It evaluates complex lighting conditions, such as the position of the subject, the brightness, the direct light, and the backlighting, and adjusts the settings to the correct exposure for the main subject. [] Center Weighted Average Averages the light metered from the entire frame, but gives greater weight to the subject matter at the center. Spot Meters the area within the spot AE pointat the center of the LCD monitor. Use thissetting when youwant to set the exposure on the subject in the center of the monitor. [] Of) g 5" 55 Adjust the exposure compensation setting to avoid making the subject too dark when it is backlit or shot against a bright background or to avoid making lights appear too bright in night shots. To Cancel the Exposure Compensation Restore the compensation value to [0]. • Exposure compensation is not available in the [] or [] My Colors mode. • In '_ mode, the exposure shift can be set/canceled (p. 49). 56 You can set the shutter speed to a slow setting to make dark subjects appear brighter. See MenusandSettings(p. 32)._. o _ "_'See Menus and Settln[M_4_" s 31 o so ,o0 :: speed_ _c. eThe higher the value the brighter :" the image and the lower the value, the darker the image. To Cancel the Long Shutter Mode Press the MENU button when the Long Shutter FUNC. menu is displayed. 57 • Use the LCD monitor to confirm that the image was recorded at the desired brightness. • Please note that camera shake becomes a factor at low shutter speeds. Secure the camera to a tripod before shooting. • Use of the flash may result in an over-exposed image. If this occurs, shoot with the flash set to [_-]. • The following are unavailable: Exposure Compensation Metering AE Lock FE Lock ISO speed: Auto Flash: Auto, Auto with Red-Eye Reduction 58 Normally, the [] (Auto) white balance setting selects an optimal white balance. When the [] setting cannot produce natural looking colors, change the white balance using a setting appropriate for the light source. White Balance Settings [] Auto [] Day Light For recording outdoors on a bright day [] Cloudy For recording under overcast, [] Tungsten [] Fluorescent Settings are automatically set by the camera shady or twilight skies For recording under tungsten and bulb-type wavelength fluorescent lighting 3- For recording under warm-white, white (3-wavelength) fluorescent or warm- cool-white lighting [] Fluorescent H For recording under daylight fluorescent, or daylight fluorescent-type 3-wavelength fluorescent lighting [] Custom For recording with the optimal white balance data retained in the camera from a white-colored object, such as white paper or cloth 59 Using the Custom White Balance You can set a custom white balance to obtain the optimal setting for the shooting conditions by having the camera evaluate an object, such as a piece of white paper or cloth, or a photo-quality gray card that you wish to establish as the standard white color. In particular, take a custom white balance reading in [] (Custom) for the following situations that are difficult for the [] (Auto) setting to detect correctly. eShooting close-ups eShooting subjects of monotone color (such as sky, sea or forest) eShooting with a peculiar source of light (such as a mercury-vapor lamp) See Menusand Settings (p. 31). _ oo,ou,, ,o,,,no Aim the camera at a piec_f white paper or cloth and press _. elf you are viewing it with the LCD monitor ensure that the center frame is completely filled with the white image. If you are using the optical viewfinder, ensure that the entire field is filled. 6O • You are recommended to set the shooting mode to [] and the exposure compensation setting to [+0] before setting a custom white balance. The correct white balance may not be obtained when the exposure setting is incorrect (image appears completely black or white). Shoot with the same settings as when reading the white balance data. If the settings differ, the optimal white balance may not be set. In particular, the following should not be changed. - ISO Speed - Flash Setting the flash to on or off is recommended. If the flash fires when reading the white balance data with the flash set to [] (auto) or [] (auto with red-eye reduction), make sure that you also use the flash when you shoot. Since the white balance data cannot be read in Stitch Assist mode, preset the white balance in another shooting mode beforehand. The camera will retain the custom white balance setting that you record even if you reset the camera to the default settings (p. 37). 61 By setting a photo effect before you shoot, and feel of the pictures you take. Photo [] 62 Effect you can change the look Settings Effect Off Records normally with this setting. [] Vivid Emphasizes the contrast and color saturation record bold colors. [] Neutral Tones down the contrast and color saturation record neutral hues. _L_4jLow Sharpening Sepia Records Records subjects with softened outlines. in sepia tones. [] Records in black and white. B/W to to A My Colors mode easily changes the colors in an image when it is shot, allowing you to alter the balance between red, green and blue, transform pale or tanned skin or change a color specified on the LCD monitor into a different color. Since they work with both stills and movies, these modes let you enjoy producing various image or movie effects. However, depending on the shooting conditions, the images may appear rough or you may not get the expected color. Before you try to photograph important subjects, we highly recommend that you shoot trial images and check the results. Moreover, the camera will record both the My Colors image and the original unaltered image if you set [Save Original] (p. 65) to [On]. _r o My Colors Settings Use this option to make red, green or blue colors more intense like the Vivid Red, Vivid Green or Vivid [] Positive Film Blue effects. It can produce intense naturalappearing colors like those obtained with positive film. [] Lighter Skin Tone* Use this option to make skin tones lighter. [] Darker Skin Tone* Use this option to make skin tones darker. [] Vivid Blue [] Vivid Green [] Vivid Red Use this option to emphasize blue tints. It makes blue subjects, such as the sky or ocean, more vivid. Use this option to emphasize green tints. It makes green subjects, such as mountains, flowers and lawns, more vivid. new growth, Use this option to emphasize red tints. It makes red subjects, such as flowers or cars, more vivid. Use this option to have only the color specified [] Color Accent the LCD monitor remain and to transform to black and white. on all others 63 Usethis option to transform a color specified on the [] [] Color Swap Custom Color LCD monitor into another. The specified color can 3nly be swapped intoone other color, multiple colors cannot be chosen. Usethis option to freely adjust the color balance between red, green, blue and skin tones*. It can be used to make subtle adjustments, such as making blue colors more vivid or face colors brighter. * The skin colors of non-human subjects may also be altered. * You may not obtain the expected results depending on the skin color. Colors: Movies). See Menus ........ -g. eUse the ÷ or 4, button to select a My Colors mode. i e[] [] [] [] [] [] Modes Press the FUNCJSET button. The display will return to the shooting screen and you can shoot. e[] [] [] Modes []: See Setting the Camera to the Coler Accent Mede (p. 66). []: See Setting the Camera to the Color Swap Mode (p. 67). SeeSe!tin 64 s(o d ........ The ISO speed will rise with some settings, which may increase the "noise" in the image. Changing the Save Method Original Image for the When you are shooting still images in a My Colors mode, you can specify whether or not both the altered image and the original image are recorded. [On]/[Off]. soo MonusSe.,ngs • f [On] s se ected, the two images will be numbered consecutively with the altered image following the original. When [Save Original] is Set to [On] - Only the altered image is shown on the LCD monitor during shooting. - The image that appears on the LCD monitor immediately after recording is the altered image. If you erase the image at this point, the original image is erased along with the altered image. Exercise adequate caution before deleting a file. - Since two images are recorded with each shot, the number of shots remaining is approximately half the number displayed when this function is set to [Off]. 65 Setting Accent the Camera Mode to the Color Colors other than the color specified on the LCD monitor are shot in black and white. See Monusa._ sot,ng_ _p3!_ i eThe camera will switch to color input mode and the display will alternate between the original image and the color accent image (using the previously set __._ co_or). _Aim th;cam;rasothatth;coloryou wish to retain appears at the center of the LCD monitor and press the ÷ button. eOnly one color can be specified. eYou can use the 4" or 4, button to specify the range of colors that are retained. - -5: Only takes the color that you want to retain - +5: Also takes colors close to the one that you want to retain m0 ................. elf you press the MENU button at this point you will return ,: !othe ........... :::::::::::::::::::::::::::::::::::::::::::::::_I_IHIHHH_IHHHHHHHHHHHHHHHHHHHHHHHHHHHHH_IHHHHHHHHHHHHHHHHHHHHH • The default color accent is green. • You may not obtain the expected results after color input mode if you use the flash, or change the white balance or metering settings. • The specified color accent is retained even if the camera's power is turned oft. 66 Setting the Camera to the Color Swap Mode This mode allows you to transform a color specified on the LCD monitor into another. Original Color (Before Swapping) Desired (After Swapping) See Menus and Settings (p. 31). eThe camera will switch to color input mode and the display will alternate between the original image and the color swap image (using the previously set color). __,'m Aim the camera So that the original color appears at the center of the LCD monitor and press the <- button. eOnly one color can be specified. eYou can use the 4, or 4, button to specify the range : of colors that are swapped. :: : • -5: Only takes the color that you want to swap • +5: Also takes colors close to the one that you want to swap _ Aim the camera so that the desired color appears at the center of the monitor and press the + button• eOnly one color can be specified. LCD Setting the Camera to a Custom Color Mode This mode allows you to adjust the color balance for red, reen, blue and skin tones. Raise the ISO speed when you wish to reduce the effects of camera shake, turn the flash off when shooting in a dark area, or use a fast shutter speed. • Cycle through the _L_/_/_/Ld_/[Auto] with each press of the ISO button. • Selecting [Auto] sets the sensitivity to produce the optimal ima°equa!itY ...................................... o 69 Your camera is equipped with an Intelligent Orientation sensor that detects the orientation of an image shot with the camera held vertically and automatically rotates it to the correct orientation when viewing it on the LCD monitor. • When the camera is held vertically to shoot, the Intelligent Orientation sensor judges the upper end to be "up" and the lower end to be "down". tt then regulates the optimal white balance, exposure and focus for vertical photography. This function operates regardless of the on/off status of the Auto Rotate function. • When the Auto Rotate function is set to [On] in shooting mode, the orientation of the camera is recorded when the shot is taken. • When the Auto Rotate function is set to [On] in playback mode, images will be rotated to their correct orientation on the LCD monitor as needed when the camera's orientation is changed (only applies to images shot when the Auto Rotate function was set to [On]). 70 ra []ln"_ [] []i_ mm[] mml3_q_a[][] You can create a new folder at any time and the recorded images will be automatically saved to that folder. Create New Folder Auto Create Creates a new folder the next time you shoot images. To create an additional folder, insert another check mark. You can also specify a date and time if you wish to create a new folder using a shooting time after the spec fed date and t me (p. 36). ;eate Folder]. Soe onus ond so ,Creating a folder the next place a check mark [Create New Folder] time you shoot besi .de _ . a [] displays on the LCD monitor. The symbol will cease to display after the new folder is created. Setting the Create] ! Day or Time option and for Automatic Folder Creation a tij]&e in the [Time] option_. e[] displays when the specified time arrives. The symbol will cease to display after the new folder is created. 71 Upto2000 images canbesaved intoonefolder. Anewfolder willautomatically becreated when yourecord more than that number even ifyouarenotcreating new folders. Theimages youshoot areautomatically assigned filenumbers. You canselect howthefilenumber isassigned. File Number Continuous Auto reset Reset Function A number one higher than the last one recorded is assigned to the next image. This is convenient for managing all your l images together on a computer because you avoid file name duplication when changing folders or memory cards*. IThe folder and image number are reset to the starting value (100-0001)*. This is convenient for managing images on a fo der-by-fo der bass. *When a blank memory card is used. If a memory card with recorded data is used, the 74:ligit number for the last recorded folder and image is compared with the last one on the card, and the larger of the two is utilized as the basis for new images. 72 File and Folder Recorded images are with 0001 and ranging numbers starting with images can be saved Numbers assigned consecutive file numbers starting up to 9999, while folders are assigned 100 and ranging up to 999. Up to 2,000 into a single folder. New Folder Created MemoryCard Exchangedfor Another Memory Card 1 Memory Card 1 Memory Card 2 Memory Card 1 Memory Card 1 Memory Card 2 Continuous Auto Reset _r o o • Images may be saved to a new folder when there is insufficient free space even if the total number of images in a folder is less than 2,000 because the following types of image are always saved together into the same folder. - Images from continuous shooting - Self-timer images (custom) - Stitch Assist mode images - My Colors images ([Save Original] set to [On]) Olmages cannot be played back when the folder numbers are duplicated or image numbers are duplicated within folders. OPIease refer to the Software & WtYeless Guide for information regarding folder structures or image types. 73 Playback/Erasing Please also see the Basic Guide (p. 11). iii [Pre, thezoomie e;to d ........................ • _" [ii will display and a ..... magnified portion of the image will display. -Images can be magnified up to a factor of approximately 10x. I' pp " . the Displayed Area around )' the image, • If you press the FUNC./SET button while in magnified display, the camera switches to image advance mode and @c÷ will display. You can use the ÷ or ,_ button to advance to the next or previous image at the same level of magnification. The image advance mode is canceled when you press the FUNC.ISET button again. ,,-Yo ca g th magn!!ica! e w hez O0 To Cancel the Magnified Display Press the zoom lever toward =-:. (You can also cancel it immediately by pressing the MENU button.) e!.... n,oan v,ew e,e,e a thezoom iever toward _, at once. OUse the ÷, ,_, "1_ or 41, button to change the image selection. 1! Movie "10 Switching between Sets of Nine Images The jump bar will display if you press the zoom lever toward =-: while in index playback and you can switch the display between sets of nine images. OUse the ÷ or ,_ button to move to the previous or next set of nine images. oHold the FUNC./SET button down == Jurn Bar and press the ÷ or ,_ button to jump to the first or last set. To Return to Single Image Playback Press the zoom lever toward 0,. 75 When you have many images recorded onto a memory card, it is handy to use the five search keys below to jump over images to find the object of your search. [] IJump 10 Images [] IJump 100 Images Jumps over 100 images at a time. Jumps over 10 images at a time. [] IJump Shot Date Jumpsto the first image of each shooting date. [] Jump to Movie Jumpsto a movie. [] Jump to Folder Dspaysthefrst button. The camera will switch to jump mage neachfoder. ,_ _ search mode emhe screen sample will vary slightly according to the search key. Locat,on of=a_e I currently being I I :,_ displ_yedber of images matching search key. a searc............ ....... ,,.., .,ess t.e, or÷b.tto.. To Return to Single Image Playback Press the MENU button. 76 kv j ILvA ,< o" I"11 Operating the Movie Control Panel [] Ends playback and returns to single image playback [] Print (An icon will display when a printer is connected. See the Direct Print User Guide for details.) [] Transfer (An icon will display when a computer is connected. See Software& Wireless Guide for details.) [] Play [] Slow Motion Playback (You can use the ÷ button to slow down or the ,). button to speed up playback.) [] Displays the first frame [] Previous Frame (Rewinds if the FUNC./SET button is held down) [] Next Frame (Fast Forwards if the FUNC,/SET button is held down) [] Displays the last frame [] Edit (Switches to movie editing mode) (p. 78) _.Q 77 • Use the television's controls to adjust the volume when playing a movie on a TV set (p. 93). • The sound cannot be played in slow motion playback. You can delete portions of recorded movies. i_ Seiect movie m (Sdiiiinth control e ..................................................... M,ovie Editing Panel panel and ._ ,_,_ pre,s@. • The movie editing panel and the movie editing bar wilI disptay. Movie Beginning) or [] button to specify (Cut the End) and cut point( Editing the I ), Bar ÷ or • To check a temporarily edited movie select [] (Play) and press the FUNC./SET button. • Selecting [] (Exit) cancels the edit and restores the movie control panel. _ Se'ec, _ iSa-e)a"d P;ess @: 78 • [New File] saves the edited movie under a new file name. The preedit data Is left unchanged. Note, if you press the FUNC.ISET _ ......... ___i_ ° button while saving the movie, saving is canceled. e[Overwrite] saves the edited movie with its original name. The pre-edit data is lost. eWhen there is not enough space left on the memory card, only [Overwrite] can be selected. It may take approximately 3 minutes to save an edited movie. If the battery runs out of charge partway through, edited movie clips cannot be saved. When editing movies, it is recommended to use a fully charged battery or the separately sold AC Adapter Kit ACK-DC1O (p. 123). -e m 79 Images can be rotated clockwise 90 ° or 270 ° in the display. Original 8O 90 ° 270 ° You can select the transition effect displayed when switching between images. Usual display [] I The displayed image darkens and the next image gradually brightens until it is displayed. I Press the ÷ button to have the previous image display from the left • .i I and the ._ button to have the next image display from the right. 1 The transition effect will not display when an image is switched while the camera is reading an image from the memory card. ---. In playback mode (including single image playback and index playback), you can attach sound memos (up to 60 seconds) to an image. The sound data is saved in the WAVE format. [] (Play) Menu_[_J. See Menus and Settings (p. 32). 81 usethe ÷ or U button to select an image to ........ iiiiiiii_!i_i attac, aso..d memo toa.d,,ess ®. • The sound memo panel will display. N:Se'ect 0 ("eco;"i an"";ess _: eThe e apsed t me and the remaining time display. ePressing the FUNC./SET button pauses the recording. Pressing it again resumes recording. eUp to 60 seconds of recordings can be added to any one image. _t _ _ _ SE_andDsMedm_iPa_e_ | p Rve_ami_ing Time__ J (Adjust with the _1_or 41, button) Sound Memo Panel Exit Record NI,_Pause Play Erase [] 82 Select [Erase] in the confirmation screen and press the FUNC./SET button. Automated Playback of Memory Card Images. Image settings for slide shows are based on the Digital Print Order Format (DPOF) standard (p. 88). [] All Images Date Plays all images on a memory card in order. Plays images beadng a specified date in order. [] Folder Plays images in a specified folder in order. [] Movie Plays movie files only, in order. [] Stills Plays still images only, in order. _1-_]_ Custom 1-3 Plays the images selected for each slide show, Custom 1, Custom 2 or Custom 3, in order (p. 85). 83 Se'ect[SCar*]'nd ®: ;, il eThe following functions are available during slide shows. - Pausing/resuming the slide bhutloW:n press the FUNO'/SET _ _ __ - Fast forwarding/rewinding the slide show: press the ÷ or + button (continue to hold the button to switch between images more rapidly) 0thet Transition p!es ............. Effects You can select the transition effect used when one image is replaced by another. [] Usual display I_ The new image gradually brightens as it moves upward from the bottom. The new image first appears in a cross shape and gradually expands mLB to display the full image. Portions of the new image move horizontally, then the image expands to display the full image. In single image playback mode (when displaying a still image), you can start a slide show from the current image displayed by holding the FUNC./SET button while you press the _,_, button. Please note that if you do this while the last image shot is displayed, the slide show will start from the first image using the same date. 84 ,.< Selecting Images for Playback (511-_]) Select only the images that you wish to play back and save them as a slide show (Custom 1,2 or 3). Up to 998 images can be selected. They will be played back in their order of selection. Select _!, [] or [] and press @. eOnly the [] icon will display at first. When you set [], the icon will change to [] and [] will display. [] and [] will change in the same way when they are set. Use the 4. or + button to move between images for playback and the _ button to select or deselect them, eYou can also select images in the index playback mode. ePressing the MENU button cancels the setting. Check mark indicating selection Number indicating the selection order Selecting All Images 1. After selecting &l-_l in step 1 (p. 85), use the ÷ button to select [Mark all] and press the FUNC./SET button. 2. Use the ÷ button to select [Mark all], press the FUNC./SET button. 3. Use the "l, button to select [OK] and press the FUNCJSET button. To desetect all images, select [Reset]. Adjusting the Play Time and Repeat Settings ePlay Time Sets the duration that each image displays. Choose between 3-10 seconds, 15 seconds and 30 seconds. Displaying time can vary slightly depending on the image. eRepeat Sets whether the slide show stops when atl the slides have been displayed or continues until stopped. _:: Select [Set u"] an" press [Repeat] and then the desired option. ,; 86 -Pressing the MENU button cancels the setting. _. ........................................... I _l__.._J LI_]_[_'t You can protect important images and movies from accidental erasure. L_.o,o.,., SeeMenusandSettings(p. protect and press ePressing the FUNC./SET 32). r&_ @. button again cancels the setting. eYou can also protect images in the index ptayback mode. Protection Icon I =F'I_L"_'_j !'_,II I II'TT_j[=_-_ g See Menus and Settings (p. 32). ...... !!. : o, Please format the memory card when you want to erase not only image data but also all the data contained on the card (p. 28). 87 l Print Settings/Transfer [.'I_:[IT_j[!,'F'-Jl,]2o); Settings 2;r_: [.-l_:[;r_ You can select images on a memory card for printing and specify the number of print copies in advance using the camera. This is extremely convenient for printing on a direct print compatible printer, or for sending the images to a photo developing service that supports DPOR The _ icon may display for a memory card with print settings set by a different DPOF-compliant camera. These settings will be overwritten by those set by your camera, Single _ I I Images Select [order] and press eSelecting [Reset] cancels all print settings for the images. _i ..................................................... All the Images on a Memory Card 89 ............................................................................................................................ _i_iiiii_iiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiii ii_ _ • Images are printed in order according to the file number. • A maximum of 998 images can be selected. • When [Print Type] is set to [Both], the number of copies can be set. When it is set to [Index], the number of copies cannot be set (only one copy will be printed). • Do not set the date in the DPOF print settings when printing images that have had the date embedded with the [Date Stamp] function. This may cause the date to be printed twice. Setting the Print Style The following print styles can be selected. Print Type _ ira[] Standard Index reducedone Prints size image in anper index page. format. Prints the selected images together Both Prints formats. index the images in both the standard [] Date Adds the date to the print. [] File No, Adds the file number to the print. _y:e 9O at a and ................... • TheDate andFileNo.settings change according tothe PrintType asfollows. - Index [Date] and[FileNo.] cannot besetto[On]atthesame time. - Standard orBoth [Date] and[FileNo.]canbesetto[On]atthesame time. However, theprintable information mayvarybetween printers. • Embedded dates in[] (Postcard DateImprint mode) (p.44)print outeven when [Date] is set to [Off]. • Dates print in the style specified in the [Date/Time] menu (p. 35). You can use the camera to specify settings for images before downloading to a computer. Refer to the Software & Wireless Guide for instructions on how to transfer images to your computer. The settings used on the camera comply with the Digital Print Order Format (DPOF) standards. The _, icon may display for a memory card with transfer settings set by a different DPOF-compliant camera. These settings will be overwritten by those set by your camera. O9 ' i ii i'ili see i'i Menu 91 Single Images _ Se'ect [O;der] and ";ess _. eSelecting [Reset] cancels all ::: transfer order settings. Select an image to transfer ePressing the FUNC./SET button again deselects the setting. eYou can also select images in the index playback mode. All the Images [Mark on a Memory alli and and press _, TransferSelection Card Press _: eSelecting [Reset] cancels all transfer order settings. ....... _,e'ec' an"";ess®: • Images are transferred in order according to the file number. • A maximum of 998 images can be selected. 92 I Viewing Images on a TV set You can use a video-compatible television as a monitor to shoot or play back images when it is connected to the camera with the supplied AV Cable. III The video output signal can be switched (NTSC or PAL) to accommodate different regionat standards (p. 36). The default setting varies between regions. - NTSC: Japan, US.A. Canada, Taiwan and others - PAL: Europe, Asia (excluding Taiwan), Oceania and others If the video system is set incorrectly, the camera output may not display properly. r# l Customizing theCamera(MyCameraSettings) My Camera allows you to customize the start-up image and startup, operation, self-timer and shutter sounds. You can change and register these settings, enabling you to customize the camera to suit your own tastes. Images recorded onto thememory cardandnewly recorded sounds canbeadded asMyCamera settings tothe[] and[] menu items. Youcanalsousethesupplied software toupload your computer's images andsounds tothecamera. Acomputer isrequired torestore theMyCamera settings to thedefaults. Usethesupplied soft:ware (ZoomBrowser EX/ ImageBrowser) torestore thedefault settings tothecamera. 3 95 See the supplied Sofiware & Wireless Guide for more information on creating and adding to the My Camera data. 96 I UsingWirelessConnection (Connecting to Printer) When you want to save or print your images, this camera lets you transfer them to a personat computer or printer wirelessty, without the need for cables. Connecting Printer to a If you attach the supplied wireless print adapter to a Canon PictBridge compliant printer, you can print images taken with the camera after transferring them to the printer over a wireless connection. (p. 98) & See the instructions, Connecting beginning on the next page. to a Computer If you install the software included on the Canon Digitat Camera SoIution Disk on a wireless capable computer*, you can establish a wireless connection L_tween the camera and the computer. If you set up a wireless connection to a computer, you can transfer _mages you have already taken to the computer, but you can also shoot images and transfer them to the computer immediately (Auto Transfer), automatically print out transferred images, and even shoot images by operating the computer. * Connecting wirelessly betweenthe cameraand a computer is only possible withtheWindowsXP SP2 operating system. & Please refer to the Software & Wireless Guide. $ II III II III If your printer is not a Canon PictBridge compliant printer, you can still print your images easily by using the cable to connect the camera and printer. Please see the Direct Print User Guide for more details. tll Attaching the wireless print adapter to a printer If you attach the supplied Wireless Print Adapter WA-1 to a Canon PictBridge compliant printer, you can print the images stored on your camera's memory card via a wireless connection. Adjust the angle less print adapter, direction eThe wireless print USB adapter can be turned or rotated as shown in the illustration, eSet the orientation of the wireless print adapter's USB terminal so that it can be inserted into your printer's USB port. eDo not use unneces- terminal sary force when adjusting the angle and direction of the wireless print adapter. 98 and of the wire- possibletumieg range(270 degrees) Bend (Openand closewithin 180degree) "-_ Connecting/Disconnecting Setting up a wireless LeZJ(Wireless) Menu connection _ to a printer [Connect!Disconnect] See Menus and Settings (p. 32). eEven if you press the _,_, button without displaying the menu in playback mode, the same screen will be displayed. the [Target to select Device], [Connect] use the and press eThe monitor will display "Connecting", and soon the connection will be complete. elf a device other than [1 .WA-1] is selected as the target device, use ' 4. or Q _ (or buttons _). ,........ the 41"or 4, button to select [Target Device], then use the ÷ or ,_ button to select [1 .WA-1]. etn situations where a number of wireless print adapters are available for connection (have been registered as target devices) (p. 102), select the wireless print adapter you wish to connect to as the target device. eWhen the w re ess connect on starts, the camera's w re ess lamp and the wireless print adapter's lamp will both begin to blink blue. When the wireless connection has been completed, both lamps will remain on (without blinking). eYou can also start a wireless connection without using the menus by continually pressing the _,,M button. eWhen the wireless connection has been completed, the T, icon will display. This shows the strength of the connection's radio waves. elf a connection cannot be completed due to weak radio waves or some other reason, the connection will automatically be terminated af[er 30 seconds. For instructions on how to print once you have set up a wireless ] [connection, J please refer to the Direct Print User Guide. Ending the wireless LmJ(Wireless) connection Menu _ ....... nect], t then press [Connect!Disconnect] on:............ See Menus and Settings (p. 32). _. • If _,,I displays during wireless connection, it means that the connection is very good. The fewer the antennas displayed, the worse the wireless connection is. When T and the wireless lamp both blink, it indicates an extremely bad connection. In such a case, shorten the distance between the camera and the wireless adapter. OPIease be aware of the points below when using a wireless connection between the camera and a printer. Failure to follow these instructions may terminate the connection. - Do not use a wireless connection Rear to a microwave oven or any other appliance which emits electromagnetic waves. - Do not put the camera and the printer far apart. - Do not place objects in between the camera and printer. • If a number of wireless print adapters are available for connection, select [Target Device] and press the DISP. button to confirm which wireless print adapter you can connect to. The lamp on the available adapter will blink in the following sequence: blue, blue, orange. • If you slide the mode switch while using a wireless connection to a printer, the wireless connection will be terminated. • If you end the wireless connection while printing, printing will be interrupted. t_ o o lOl Changing channel the wireless print adapter If the wireless print adapter channel (useful frequency) is already in use by another device, change the channel to avoid interference from radio waves. wish m to change the press channel Device] and Use the channel + or ÷ buttons and press _, in [Target @. toc a get e ePress the MENU button to return to step 1 without the channe, ............................. • You cannot change the channel during a wireless connection. Registering a target device To set up a wireless connection to a printer using a wireless print adapter other than the supplied adapter, you will need to register the other adapter with the camera as a new target device. LeJJ(Wireless) Menu _ [Reg. ton _ is displayed in LCD wireless print adapter's within t0 seconds. • The message "Registration completed" will appear on the LCD monitor. Target monitor, SETUP Device]. press button the _#" ._ : •The oew,y re0,stered :: :::: wireless print adapter will be displayed on [Target Device] as [2.WA-1]. Subsequent wireless print adapters will be displayed as [3.WA-1], [4.WA-1] and so on. _iHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH_Hi IHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH • When registering within 1 meter of • If the registration (p. 115). • You can register the wireless print adapter, make sure it is the camera. fails, please refer to List of Messages up to 8 adapters with the camera. ¢) o o 103 You can delete devices which you no longer use. LmJ(Wireless) Menu _ [Delete Registration] See Menus and Settings (p. 32). Select the target device you eUse the ,IF or ,Ik button to select [Target Device], and the ÷ or ,_ button to select the target device you wish to delete. wish to delete. i Troubleshooting Power is not turned on. ePress the power button (Basic Guide p. 5). Memory card slot/battery cover is open. OConfirm that the memory card slot/ battery cover is securely closed (Basic Guide p. 2). Insufficient battery voltage ("Change the battery pack" message displays). Olnsert a fully charged battery into the camera (Basic Guide p. 2). OUse the AC Adapter Kit ACK-DC10 (sold separately) (p. 123). camera and battery terminals, cotton swab before charging or using the battery (p. 119). The camera's horizontal/ vertical orientation was changed, eThe camera's or entat on mechanism is operating. There is no malfunction. The SD memory card's write protect tab is set to "Write protect", eWhen recording to, erasing from or formatting the SD memory card, slide the tab upward (p. 121). The built-in rechargeabte lithium battery charge is ORecharge the built-in battery immediately (Basic Guide p. 4). low. ! Theimage ontheLCD • Thisdoes notconstitute a monitor wiIldarken in malfunction andhasnoeffect on strong sunlight orbright images thathave been shot. light. Display flickers when eThis isnotacamera malfunction shotunder fluorescent (flickering recorded inmovies, but lighting, notinstillimages). Subject istoobright. 'oThisisanormal occurrence in devices containing CCDs anddoes notconstitute amalfunction. This baroflight willnotberecorded when shooting stillphotos, butitwillbe recorded when shooting movies. Aslowshutter speed has• Raise thetSOspeed (p.69)orset likely been selected theflash toanysetting other than because ofinsufficient otis(flash off),orsecure thecamera lighting. omething, such asatripod (Basic Guide p. 9). This displays when using a memory card that has print settings, transfer settings or slide show image selections set by other DPOF-compliant cameras. eThese settings will be overwritten by those set by your camera (p. 88). Camera automatically eThere isnoeffect ontherecorded lightened theimage image. displayed ontheLCD monitor tomake iteasier toseewhen shooting in adarkarea (p.21). [.1 Mode switch is set to [] (playback). eSet the mode switch to a (Rec.) or Bmm(Movie) (Basic Guide p. 6). Flash is charging, eWhen charging is complete, the indicator will light orange and you are free to start shooting (p. 26). Memory card is full. etnsert a new memory Guide p. 2). elf required, download a computer and erase memory card to make Memory card is not formatted correctly, SD memory card is write protected, card (Basic the images to them from the space. eFormat the memory card (p. 28). elf reformatting does not work, the memory card logic circuits may be damaged. Consult the nearest Canon Customer Support Help Desk. oSlide the write protect tab of the SD memory card upward (p. 121). -I g o Usually the recorded eConfirm the actual image size with image contains more of the LCD monitor. Use the LCD the scene than is seen in monitor when taking close-up shots the viewfinder. (p. 19). _o 107 AF-assist Beam is set to [Off]. etn dark places where it is difficult for the camera to focus, the AF-assist Beam will emit to assist focusing. As the AF-assist Beam will not function when turned off, set it [On] to activate it (p. 33). Take care not to obstruct the AF-assist Beam with your hand when used. The camera moves when the shutter button is pressed, eSetting the self-timer to [] (2 seconds) delays the shutter release for 2 seconds and allows the camera to stop shaking, thus preventing a blurred image (p. 45). Even better results can be obtained by placing the camera on a stable surface or by using a tripod to shoot. Subject is out of focal range, eShoot with the subject at the correct shooting distance (p. 127). The subject is hard to focus on. eUse the focus lock or AF lock to shoot (p. 52). Insufficient light for shooting. eSet the flash to [] Guide p. 9). Subject is dark in contrast to the background, eSet the exposure compensation positive (+) setting (p. 56). eUse AE lock or use the spot metering function (pp. 53, 55). Subject is too far away for flash to reach, eShoot within correct shooting distance of the subject when using the built-in flash (p. 128). eRaise the tSO speed and then shoot (p. 69). (flash on) (Basic to a Subject istooclose, eShoot within correct shooting making theflash too distance ofthesubject when using strong, thebuilt-in flash(p.128). Subject isbright in eSettheexposure compensation toa contrast tothe negative (-)setting (p.56). background, eUse AElockorusethespot metering function (pp.53,55). Toomuch light isshining eChange theshoot ngange directly intothecamera, orisbeing reflected off thesubject. Flash issettoon. eSettheflash to[] (flash off)(Basic Guide p. 9). ISO speed is too high. Light from the flash has reflected off dust particles or insects in the air. This is particularly noticeable when shooting using the wide angle. • Higher ISO speeds increase image noise. To take clean images, use as low an ISO speed as possible (p. 69). eta _'], [], [] and [] modes, the tSO speed increases and noise can appear. eThis is a phenomenon that occurs with digital cameras and does not constitute a malfunction. ,,,,N C o" o _o 109 Light reflecting backfrom eyes can make them appear red when the flash is used in dark areas. eUse the [] (auto with red-eye reduction) mode (Basic Guide p. 9). For this mode to be effective, the subject must be looking right at the red-eye reduction lamp. Try asking them to look directly at the lamp. eEven better results can be obtained by increasing the lighting in indoor settings or approaching closer to the subject. The shutter will not activate for approximately 1 second after the red-eye reduction lamp fires in order to improve the effect. The memory card's performance has dropped. aTe enhance the continuous shooting performance, you are recommended to format the memory card in the camera after you save all its images to your computer (p. 28). Memory card was formatted in another device. • Use a memory card formatted in your camera (p. 28). Memory card slot/battery cover was opened with power on. eFirst close the memory card slot/ battery cover and then turn the power off (Basic Guide p. 2). Thefollowing types of eAIthough the recording time may not memory cards areused. display properly during shooting, the - Slow recording cards. movie will be recorded correctly on - Cards formatted ona the memory card. Recording time different camera ora will display properly if you format the memory card in this camera computer. (excluding slow recording memory - Cards which have had images recorded and erased repeatedly. cards) (p. 28). If free space in the camera's built-in memory becomes too scarce, the "!" symbol will display on the LCD monitor in red and the camera will automatically cease filming shortly thereafter. • Try the following procedures. - Reformat the memory card before filming (p. 28). - Lower the recording pixels or frame rate (p. 40). - Use a high-speed memory card (SDC-512MSH, etc.). Zoom lever was pressed while shooting in movie mode. OOperate the zoom before shooting in movie mode (Basic Guide p. 8). Note the digital zoom is available while shooting, but only in Standard movie mode (p. 42). C _r t/I _r o _o 111 You attempted to play back images shot with another camera or images edited with a computer. • Computer images that cannot be played back will play back if they are added to the camera using the supplied software program ZoomBrowser EX or ImageBrowser. See ZoomBrowser EX/ ImageBrowser Software User Guide (PDF). File name was changed with a computer or file location was changed. eSet the file name or location on the file format/structure of the camera (Refer to the Software & Wireless Guide for details). Some movies shot with another camera cannot be edited. Movies recorded with high recording pixets and frame rates may momentarily stop playing if played on slow reading memory cards. You may experience frame dropping and audio breakup when playing back a movie on a computer with insufficient system resources. Movies recorded at the [] (Fast Frame Rate) setting and with the video signal set to the PAL format, may play back with a frame rate lower than the recorded one when output to a TV or video. You can play every frame by using the stow motion playback. eTo check the images at the original frame rate, you are recommended to play the movie back on the camera's LCD monitor or on a computer. Battery lifeexceeded if OReptace thebattery withanewone battery loses itscharge (Basic Guide p. 2). quickly atnormal temperature (23°C/73 °F). Battery life exceeded. OReptace the battery with a new one (Basic Guide p. 2). k 6Vl FT_"I'TT[;L';T_ t';Tr'[__'l'r'B Incorrect video system setting. Shooting in Stitch Assist mode. OSet the video system to the , appropriate setting, NTSC or PAL, for your TV (p. 36). OThe output will not appear on a TV in Stitch Assist mode. Cancel the Stitch Assist mode (Basic Guide p. 6). -I C o _o 113 You have not attached the wireless print adapter to the printer. eAttach the wireless print adapter to ', the printer (p. 98). Your printer is not a Canon PictBridge compliant printer, eWhen using a wireless connection between the camera and printer, ensure you are using a Canon PictBridge compliant printer (p. 98). You have not attached the compact power adapter to the wireless print adapter. elf you are using a Canon PictBridge compliant printer (other than a CP710/CP510), please attach the CA-DC20/CA-DC20E compact power adapter. The wireless connection has become weak. ',eDo not use near a microwave oven or any other device that emits radio waves. ',eDo not put the camera and the printer far apart. eDo not place anything between the camera and the printer. lust of Messages • During shooting, playback, or wirelessconnectionto a printer_ The error messages be displayed. • Duringwirelessconnection computer Ptease refer to the Soffwat'e & Wireless Guide. • During printing toa _ shown below will _> Please refer to the Direct Print User Guide. • Image is being recorded to, or read from, memory card. The playback mode isstarting up. • You turned on the camera without a memory card installed. • The SD memory card is write-protected. • You attempted to shoot an image without a memory card installed, or attempted to attach a sound memo to a movie. eMemory card has experienced an anomaly. • Memory card is full of images and no more can be recorded or saved. Or no more image settings or sound memos can be recorded. • The image could not be created because there is an image with the same name as the folder that the camera is attempting to create, or the highest possible file number has already been reached. In the Set up menu, set the [File Numbering] option to [Auto Reset]. Save all the images you wish to retain onto a computer, then reformat the memory card. Please note that formatting will erase all the existing images and other data. • Battery charge isinsufficient tooperate thecamera. Replace itat once withacharged oneorrecharge thebattery. • Noimages recorded onmemory card. • Youattempted toplayback animage larger than4992 x 3328 pixels orwithalarge data size. • Youattempted toplayback anincompatible JPEG image. • Youattempted toplayback animage withcorrupted data. • Youattempted toplayback aRAW image. • Youattempted toplayback animage thatwasrecorded ina special data type(proprietary data typeused bythecamera of another manufacturer, etc.)oramovie cliprecorded byanother camera. • Youattempted tomagnify animage recorded inadifferent camera ordata type, animage edited withacomputer, ora movie. • Youattempted torotate animage recorded inadifferent camera ordatatype, animage edited withacomputer, oramovie. eAsound memo cannot beadded tothisimage since thedata typeoftheexisting sound memo isincorrect. oYou attempted toregister animage recorded inadifferent camera oramovie asastart-up image. oYou attempted toerase oreditaprotected image, movie or sound memo. oToo many images have been marked withprintsettings, transfer settings orslide show settings. Cannot process anymore. oCould notsave theprint, transfer orslideshow settings. oYou attempted tosettheprintsettings foranon-JPEG image. o(xx:number) Camera malfunction. Turn thepower offandthen back on,thenshoot orplayback. Aproblem exists iftheerror code reappears. Note thenumber andcontact yourCanon Customer Support Help Desk. Ifanerrorcode displays directly after taking apicture, theshotmaynothave been recorded. Check image inplayback mode. OWireless connection hasfailed. Please follow theinstructions below corresponding tothenumber shown intheerror message. 1 2 Anerror has ocoured when you set up a wireless connection to 3 a computer. Please refer to the Software & Wireless Guide. t- 4 5 7 Wireless connection has failed. Either shorten the distance between the camera and the wireless print adapter; change the orientation of the camera or the angle of the wireless print adapter; or change the channel settings. Then establish a wireless connection again. When a large volume of images (around 3,0go) is storedon the memory card,it may not be possible to establisha wireless connection. In such a case, use a memory card reader to store the necessary images in a computer,then reducethe imageson the memory card and try again to establish a wireless connection. o r_ r_ 117 OWireless connection has disconnected. Either shorten the distance between the camera and the wireless print adapter; change the orientation of the camera or the angle of the wireless print adapter; or change the channel settings. Then establish a wireless connection again. o8 target devices are already registered, tf you wish to register additional devices, use [Delete Registration] to delete target devices you no longer use. ORegistration has failed. Either shorten the distance between the camera and the wireless print adapter, or change the orientation of the camera or the angle of the wireless print adapter. Then carry out registration again. Also, if "Press the SETUP button" appears on the LCD monitor at the time of registration, press the camera's SETUP button within 10 seconds. ORegistration of the same wireless print adapter has already been completed. I Appendix The folIowing icon and message will display. [] I Battery charge is low. Recharge it as soon as possible it will be used for an extended period. Battery charge is insufficient to operate the camera. Replace the battery immediately. Change the battery pack • Keep the battery terminals clean at all times. Dirty terminals may cause poor contact between the battery and camera. Polish the terminals with a soft cotton swab before charging or using the battery. • At low temperatures, battery performance may be reduced and the low battery icon (_1) may appear earlier than usual. Under these conditions, revive the battery by warming it in a pocket immediately before use. • However, ensure that there are no metallic items in the pocket that could cause a short circuit, such as a key ring, etc. The battery may be short circuiting. • Do not allow any metal objects such as key rings to touch the { _ ) and (O) terminals (Fig. A). To carry the battery or store it during periods of disuse, always replace the terminal cover (Fig. B). These conditions can damage the battery. I Youmaybeabletocheck thecharge state depending upon how theterminal cover isattached (Fig.C,D). Fig. _ _is C Charged Battery Attach it so the ,_, visible. Fig. D I= | __ ,_ l _ __ _ Spent Battery Attach it the Fig. C. opposite way to • You are recommended to use it in the camera until it is completely discharged and to store it in an indoor location with low relative humidity and between the temperatures of 0 - 30 °C (32 - 86 °F). Storing a fully charged battery for long periods of time (about one year) may shorten its life cycle or affect its performance. If you do not use the battery for long periods of time, charge it fully and discharge it fully in the camera about once a year before returning it to storage. th_ • Since this is a lithium-ion battery, you need not completely discharge it before recharging. • It takes approximately 90 minutes to fully charge the battery from a fully discharged state (based on Canon's testing standards). • Charging it within a temperature range of 5 - 40 °C (41 - 104 °F) is recommended. • Charge times may vary according to the ambient temperature and the battery's charge state. • You are advised to charge the battery on the day of use, or one day before, to ensure a full charge. Even charged batteries continue to discharge naturally • If the performance of the battery diminishes substantially even when it is fully charged, its life has been exceeded and it should be replaced. __ (you can protect the images and other data card).down lide on thethe switch Up. Writing/Erasing Possible Writing/Erasing Impossible • Memory cards are high-precision electronic devices. Do not bend them, apply force to them, or subject them to shocks or vibration. • Do not attempt to disassemble or alter the memory card. • Do not allow dirt, water or foreign objects to contact the terminals on the back of the card. Do not touch the terminals with your hands or metal objects. • Do not peel away the original label on the memory card or cover it with another label or sticker. • When writing on the memory card, do not use a pencil or ball-point pen. Only use a soft point pen (e.g. felt-tip pen). • Do not use or store memory cards in the following locations. • Locations subject to dust or sand • Locations subject to high humidity and high temperatures • Since some or all of the data recorded on the memory card may be corrupted or erased by electrical noise, static electricity, or camera or card malfunction, making a backup copy of important data is recommended. "o _D 3" 121 • Please note that formatting (initializing) an memory card erases all data, including protected images. • You are recommended to use memory cards that have been formatted in your camera. • The card supplied with the camera may be used without further formatting. • When the camera is malfunctioning, a corrupted memory card might be the cause. Reformatting the memory card may solve the problem. • When a non-Canon brand memory card is malfunctioning, reformatting it may solve the problem. • Memory cards formatted in other cameras, computers, or peripheral devices may not operate correctly in this camera. When that happens, reformat the memory card with this camera. • If formatting in the camera does not work properly, turn the camera off and re-insert the memory card. Then turn the camera back on and format again. It is best to power the camera with AC Adapter Kit ACK-DC10 separately) when you are using it for long periods of time or connecting it to a computer. Connect the power cord to the compact power adapter first and then plug the other end into the power outlet. Open the memory card slot/battery cover, push the battery lock in the direction of the arrow, pier until it is locked. eSIide the memory card slot/battery cover closed. then insert the DC cou- (sold CompactPowerAdapter CA-DC10 _ _-x _ _ _"__ Batten Lock DC Cou )ler DR-10 the inside, DC coupler then open the terminal cover, )> "D "D ¢D c_ 3" 123 CI0se the memo_ slot/battery attach the cover cord card ................................ __\ and to the __ DC terminal, High-Power ......................... __l _1_ Flash HF-DC1 This flash is used to supplement the camera's built-in flash when the subject is too far away for proper illumination. Use the following procedures to affix the camera and High-Power Flash to the supporting bracket. Please read the instructions accompanying explanation. the flash along with this Tripod Sockets Bracket (Comes with the flash) • Before attaching the bracket to the flash, check that the lithium battery (CR123A or DL123) is installed. • To illuminate the subjects properly, install the flash so that it is up against the side of the camera and parallel with the camera's front panel. • A tripod can be used even when the flash is attached. Batteries • Charge becomes Severely Limited If the battery usage time has considerably diminished, wipe the battery terminals well with a dry cloth. The terminals may be dirty from fingerprints. OUsage in Cold Temperatures (Less than 0°C/32°F) Get a spare generic lithium battery (CR123A or DL123). You are recommended to place the spare battery in your pocket to warm it up before switching it for the battery in the flash. • Non-Use over Extended Periods Leaving batteries in the High-Power Flash could allow the battery fluid to leak, damaging the product. Remove the batteries from the High-Power Flash and store them in a cool, dry place. 3" 125 cleansers water to clean the camera. These substances may distort or damage Never use thinners, benzine, synthetic or the equipment. Camera Body Gently wipe dirt off the camera body with a soft cloth or eyeglass lens wiper. Lens First use a lens blower brush to remove dust and dirt, then remove any remaining dirt by wiping the tens lightly with a soft cloth. Viewfinder and LCD Monitor Use a lens blower brush to remove dust and dirt. If necessary, gently wipe with a soft cloth or an eyeglass lens wiper to remove stubborn dirt. All data is based on Canon's standard testing methods. Subject to change without notice. PowerShot SD430 WIRELESS/DIGITAL Camera Effective Pixels Image Sensor Lens Digital Zoom Optical Viewfinder LCD Monitor AF System Shooting Distance (From the front of the lens) Shutter Shutter Speeds Metering System Exposure Compensation ISO Speed White Balance DIGITAL ELPH IXUS WIRELESS (W): Max. wide angle (T): Max. telephoto Approx. 5.0 million 1/2.5-inch CCD (Total number of pixels: Approx. 5.3 million) 5.8 (W) - 17.4 (T) mm (35mm film equivalent: 35 (W) - 105 (T) mm) f/2.8 (W) - f/4.9 (T) Approx. 4.0x (Up to approx. 12x in combination with the optical zoom) Real-image zoom viewfinder 2.0-inch, low-temperature polycrystalline silicon TFT color LCD, approx. 118,990 pixels (Picture coverage 109%) TTL autofocus Focusing frame: 9-point AiAF/1-point AF (fixed to center) Normal: 39 cm (1.0 ft.) - infinity Macro: 3- 59 cm (W)/30 - 50 cm (T) (1.2 in. - 1.6 ft. (W)/1.0 - 1.6 ft. (T)) Infinity: 3 m (9.8 ft.)- infinity Mechanical shutter + electronic shutter 15 - 1/1599 sec. • The shutter speed vades accordingto the shooting mode. • Slow shutterspeeds of 1.3 sec. or slower operate with noise reduction. Evaluative, Center-weighted average or Spot (fixed to center) + 2 stops in 1/3-stop increments Auto*, ISO 50/100/200/400 equivalent * Camera automatically sets the optimal speed. Auto, pre-set(available settings: Daylight, Cloudy, 3" Tungsten, Fluorescent or Fluorescent H) or custom 127 Built-in Flash Flash Range Auto, auto with red-eye reduction, flash on with red-eye reduction, flash on, flash off, slow synchro Normal: 50 cm - 3.5 m (1.6 - 12 ft.) (W), Macro: 50 cm - 2.0 m (1.6 - 6.6 ft.) (T) 30 - 50 cm (1.0 - 1.6 ft.) (W/T) (When ISO speed is set to AUTO.) Shooting Modes (Still images) Auto, Manual 1, Digital macro, Portrait, Night Snapshot, My Colors, Scene Mode 2, Stitch assist 3 1 Long shutter mode available 2 Kids&Pets, Indoor, Foliage, Snow, Beach, Fireworks 3 Selectable in Manual mode. (Movies) Continuous Shooting Self-timer Standard, Fast Frame Rate, Compact, My Colors Approx. 2.1 shots/sec. (Large/Fine mode) Activates shutter after an approx. 10-sec./ approx. 2-sec. delay, Custom Timer PC-controlled ShootingAvailable (Wireless connection only. Exclusive software program is included in the camera kit.) Recording Media SD memory card/MultiMediaCard • This camera has been tested with memory cards through 2GB. All memory cardfunctions cannot be guaranteed. File Format Design rule for camera file system and DPOF compliant DataType(Still images) Exif 2.2 (JPEG) _1 (Movies) AVI (Image data: Motion JPEG; Audio data: WAVE (monaural)) Compression Superfine, Fine, Normal Number of Large: 2592 × 1944 pixels Recording Pixels Medium 1: 2048 × 1536 pixels (Stilllmages) Medium 2: 1600 × 1200 pixels Small: 640 × 480 pixels Postcard Date Imprint Mode:1600 × 1200 pixels (Movies) Standard, My Colors: 640 × 480 pixels (30 frames/sec., 15 frames/sec.) 320 × 240 pixels (30 frames/sec., 15 frames/sec.) Recording can continue until the memory card isfull* (can record up to a maximum of 1 GB at one time). Fast Frame Rate: (can record for 1 min.) 320 × 240 pixels (60 frames/sec.) (Movies) Compact: (can record for 3 min.) 169 × 120 pixels (15 frames/sec.) * Using super high-speedmemory cards (SDC512MSH recommended). Playback Modes Single (histogram displayable), Index (9 thumbnail images), Magnified (approx. 10x (max.) on the LCD monitor, advance or reverse through magnified images possible), Jump (jumps to every tenth or hundredth image, to the first image of those sharing a certain shooting date, to movies, or to the first image in a folder. In index playback mode, it displays 9 images at once.), Sound memos (up to 60 sec.), Slide show or Movie (edit/slow motion play back possible). Direct Print PictBridge compliant, and Canon Direct Print and Bubble Jet Direct compatible My Camera Settings Start-up image, start-up sound, operation sound, self-timer sound, and shutter sound. Wireless Standard IEEE802.11b Wireless Channel Channel 1 - 11 (PowerShot SD430 DIGITAL ELPH WIRELESS) Channel 1 - 13 (DIGITAL IXUS WIRELESS) Security Infrastructure: WEP64/128 bit, WPA-PSK (TKIP/AES) Ad hoc:WEP64/128 bit (when connecting to computer) AES (when connecting to WA-1) Transmission range Approx. 39 m (98.4 ft.) (However, make sure that there are no interfering obstacles between the devices.) • The distance will vary with the installationsite, the environmentof use, and the conditionsof use. Interface USB 2.0 Hi-Speed (mini-B), PTP (Picture Transfer Protocol) Audio/Video output (NTSC or PAL selectable, monaural audio) Power Source Battery Pack NB-4L (Lithium-ion Rechargeable battery) AC Adapter Kit ACK-DC10 Operating 9-49 °C (32- 104 °F) Temperature Number of Recording Pixels 3" 129 Operating Humidity Dimensions Weight 10-90% 99.0 × 54.4 × 21.7 mm (3.90 × 2.14 × 0.85 in.) (excluding protrusions) Approx. 130 g (4.59 oz.) (camera body only) "1 This digital camerasupports Exif 2.2 (also called "Exif Print"). Exif Print is a standard for enhancing the communication betweendigital cameras and printers. By connecting to an Exif Print-compliantprinter,the camera's image data at the time of shooting is used and optimized, yielding extremely high quality prints. Battery Capacity (Battery Pack NB-4L (Fully charged)) Number of Images Shot LCD Monitor ON Playback Time (Based on the CIPA standard) LCD Monitor Off Approx. 159 images Approx. 509 images Approx. 3 hours • The actual figures will vary according to the shooting conditions and settings. eWhen shooting movies or using the auto transfer function, the battery capacity wilI vary from that shown above. eAt low temperatures, the battery performance may diminish and the low battery icon may appear very rapidly, tn these circumstances, the performance can be improved by warming the battery in a pocket before use. Test Conditions Shooting: Normal temperature (23 °C + 2 °C/73 °F + 3.6 °F), normal relative humidity (50% + 20%), alternating wide angle end and telephoto end shots at 30 second intervals with the flash fired once every two shots and the camera power turned off after every tenth shot. Power is Ieft off for a sufficient amount of time*, then the power is turned back on and the testing procedure is repeated. eA Canon-brand memory card is used. *until the batteryreturns to normaltemperature Playback: Normal temperature (23 °C + 2 °C/73 °F + 3.6 °F), normal relative humidity (50% + 20%), continuous playback at 3 seconds per image. See Battery Handling Precautions (p. 119). Memory Cards and Estimated Capacities I'_1: Card included with the camera Recording Pixels Compression_SDC-16M I SDC-128M2_SDC-512MSH [] (Large) 2592 1944 pixels [] (a_dle 1) 2048 1536 pixels [] (M_dle 2) 1600 1200 pixels [] (Small) 640 480 pixels [] (PostCard Date Imprint Mode) [] [] [] [] [] [] [] I I I I I 173 I I 76 I I 136 I t I I i 1 I I 69 I i2i I 21_7 I J _ ] I ] I I [] i [] I J [] 1600 × 1200 pixels • _: Capable of smooth continuous shooting (p. 43) (*Only available when card has beenformatted with a low level format). • This reflects standard shooting criteria established by Canon. Actual results may vary accordingto the subject and shooting conditions. Movie Recording Pixels Frame Rate SDC-16M SDC-128M 8DC-512MSH [] [] ['_ 6 sec. Standard B40×480pixels [] 14 sec. [] My Colors 320×240pixels [] 20 sec. 1 min. 4 sec. 4 min.9 sec. 2 min. 7 sec. 8 min. 14 sec. 3 min. 1sec. 11rain.42sec. [] 40 sec. 3 min. 55 seo. 22rain.53 sec. [] 10 sec. min. 32 sec. 5min. 59sec. [] [] FastFrame [] 320×240pixels Rate [] [] Compact 160x120pixels I_ 1 min.39 sec 14rain.29sec. 55rain.57sec. • Maximummovie clip length at []: l min., at l_: 3 min. Thefiguresindicate the maximumcontinuous recording time. 3" __ 131 Image Data Sizes (Estimated) Compression Recording Pixels [] [] [] [] (2592 × 1944 pixels) 2503 KB 1395 KB 695 KS [] (2048 × 1536 pixels) 1602 KS 893 KS 445 KS [] (1600 × 1200 pixels) 1002 KB 558 KB 278 KS [] (640 × 480 pixels) 249 KS 150 KS 84 KB [] (1600 × 1200 pixels) - 558 KB Movie Recording Pixels Standard [] My Colors [] [] Frame Rate File size [] 1980 KB/sec. [] 990 KB/sec. [] 660 KB/sec. (640 × 480 pixels) (320 × 240 pixels) [] 330 KB/sec. Fast Frame Rate [] (320 × 240 pixels) [] 1320 KB/sec. Compact (160 × 120 pixels) [] 120 KB/sec. [] Wireless Print Adapter WA-1 Supported Camera PowerShot SD430 DIGITAL ELPH WIRELESS/ DIGITAL IXUS WIRELESS Supported Printer Canon PictBridge compliant printer* * Compact power adapter CA-DC20/CA-DC20E is required (except for SELPHY CP710/CP510). SELPHY CP710/CP510 can be powered by the USB bus. Wireless Standard IEEE802.11b Wireless Mode Ad hoc Mode Security AES Transmission range Approx. 30 m (However, make sure that there are no interfering obstacles between the devices.) Interface USB Display Blue LED, Orange LED Power Source DC 5.0 V (when powered by USB bus) DC 5.0 V (when using CA-DC20/CA-DC20E) Dimensions 92.5 x 27.0 x 28.8 mm (3.64 × 1.06 × 1.13 in.) (When folded) Weight Approx. 40 g (1.4 oz.) Compact Power Adapter CA-DC20/CA-DC20E Rated Input 100 - 240 V AC (50/60 Hz) 11 VA (100 V)- 13 VA (240 V) (CA-DC20) 100 mA (CA-DC20E) Rated Output 5.0 V DC, 0.7 A Operating Temperatures O-40 °C (32 - 104 °F) Dimensions 49.4 x 53.4 × 20.5 mm (1.94 × 2.10 × 0.81 in.) (CA-DC20) 28.0 x 78.0 × 21.0 mm (1.10 × 3.07 × 0.83 in.) (CA-DC20E) Weight _> "o Approx. 92 g (3.25 oz.) (CA-DC20) Approx. 75 g (2.65 oz.) (excluding power cord) (CA-DC20E) 133 SD Memory Card Interface Compatible with SD memory card standards Dimensions 32.0 x 24.0 x 2.1 mm (1.26 × 0.94 x 0.08 in.) Weight Approx. 2 g (0.07 oz.) Battery Pack NB-4L Type Lithium-ion Rechargeable battery Nominal Voltage 3.7 V DC Typical Capacity 760 mAh Operating Temperatures 0- 40 °C (32- Dimensions 35.4 x 40.3 x 5.9 mm (1.40 × 1.59 x 0.23 in.) Weight Approx. 17 g (0.60 oz.) Battery Charger 104 °F) CB-2LV/CB-2LVE Rated Input 100 - 240 V AC (50/60 Hz) 10 VA (100 V) - 14 VA (240 V) (CB-2LV) 0.1 A (100 V) - 0.06 A (240 V) (CB-2LVE) Rated Output 4.2 V DC, 0.65 A Charging Time Approx. 90 minutes Operating Temperatures 0- 40 °C (32- Dimensions 53.0 x 86.0 × 19.5 mm (2.1 x 3.4 x 0.77 in.) Weight Approx. 60 g (2.1 oz.) (CB-2LV) Approx. 55 g (1.9 oz.) (CB-2LVE) (excluding power cable) 104 °F) Compact Power Adapter CA-DC10 (Included with the separately sold AC Adapter Kit ACK-DC10) Rated Input 100 - 240 V AC (50/60 Hz) 16 VA (100 V) - 26 VA (240 V) Rated Output 4.3 V DC, 1.5 A Operating Temperatures 0- 40 °C (32- Dimensions 42.6 × 104.4 × 31.4 mm (1.7 × 4.1 × 1.2 in.) Weight Approx. 180 g (6.3 oz.) 104 °F) I INDEX A AC Adaptor Kit ACK-OC10 ... 123 AE Lock .................................. 53 AF Frame ......................... 51, 52 AF Lock .................................. 52 AE-assist Beam ...................... 33 AiAF ........................................ 33 Auto P{ay (Slide Shows) .........83 Auto Rotate Function .............. 70 AV cable ................................. 93 Exposure Shift ....................... 49 F FE Lock .................................. 54 File Number ........................... 72 Flash .............. 15, Basic Guide 9 Focus ....................................... Focus Lock ............................ 52 Frame Rates .......................... 40 FUNC. Menu .......................... 31 FUNC./SET Button ................. 17 B Battery Battery Capacity ............... 130 Charging .. 119, Basic Guide 1 Handling ........................... 119 Installing .......... Basic Guide 2 G 6 C}ock Disp)ay .......................... 20 Compression .......................... 39 Continuous Shooting .............. 43 Create Folder ......................... 71 Custom White Ba}ance ........... 60 D Date/Time Setting ............. Basic Guide 4 Using the Clock .................. 20 World Clock ........................ 29 Digital Macro .......................... 41 DIGITAL Terminal .................. 15 Digital Zoom ........................... 42 Downloading Images to a Computer ....................................... 16 DPOP Print Order Print Style ........................... 90 Selecting Images ................ 89 DPOF Transfer Order ............. 91 E Erasing All Images ........................... 87 Single Images ................ 17, Basic Guide 11 Exposure ................................ 56 Grid Lines .............................. 33 H HF-DC1 ................................ 124 Histogram .............................. 25 I }mage Data Sizes (Estimated) ............................................. 132 index Playback ...................... 75 Indicators ............................... 26 Infinity .......... 17, Basic Guide 10 Interface Cable .. Basic Guide 16 ISO Speed ............................. 69 # Jump (Image Search) ............ 76 L Language ............. Basic Guide 4 LCD Monitor Information Displayed ........ 22 Night Display ...................... 21 Playback Information ......... 23 Quick-bright LCD ............... 21 Shooting Information .......... 22 Using the LCD Monitor ...... 19 M Macro ........... 17, Basic Guide 10 Magnifying ............................. 74 Memory Card Formatting ........................ 122 Handling ........................... 121 Inserting ........... Basic Guide 2 ,oo Memory Cards Estimated Capacities ....... 131 Formatting .......................... 28 Menu FUNC. Menu ................ 31, 33 Menu List ........................... 33 Menus and Settings ........... 31 My Camera Menu .............. 36 Play Menu .......................... 34 Rec. Menu ......................... 33 Set up Menu ...................... 34 Wireless Menu ................... 34 MENU Button ......................... 17 Messages ............................ 115 Metering Modes ..................... 55 Mode Switch ...................... 17, Basic Guide4, 5 Movie Editing ................................ 78 Playback ............................ 77 Shooting ............................. 47 Mute Mode ..... 34, Basic Guide 5 My Camera Menu .................. 36 My Camera Settings .............. 94 My Colors ............................... 63 O Output .................................... 93 P Photo Effect ........................... 62 Playback ............ Basic Guide 11 Postcard Date Imprint Mode .. 44 Power Button . 17, Basic Guide 5 Power Saving ................... 27, 35 Print/Share Button ..................... 17, Basic Guide 14 Printing ............... Basic Guide 14 Protect ................................... 87 R Recording Pixels .............. 38, 46 Red-Eye Reduction ....................... 15, Basic Guide 9 Reset All ................................ 37 Rotate .................................... 80 $ Self-Timer .............................. 45 Set up Menu .......................... 34 Shooting Mode Auto ................. Basic Guide 7 Digital Macro ...................... 41 Manual ............ Basic Guide 7 Movie ......... 47, Basic Guide 8 Scene Mode .... Basic Guide 7 Beach .......... Basic Guide 8 Fireworks ..... Basic Guide 8 Foliage ........ Basic Guide 7 Indoor .......... Basic Guide 7 Kids&Pets .... Basic Guide 7 Snow ........... Basic Guide 7 Selecting ......... Basic Guide 6 Stitch Assist ........................ 49 Shutter Button ........................ 17 Fully ................. Basic Guide 6 Halfway ........... Basic Guide 5 Shutter Speed ........................ 57 Slide Shows ............................ 83 Repeat Settings .................. 86 Selecting ............................ 85 Transition ........................... 84 Smooth Continuous Shooting .43 Sound Memo .......................... 81 Spot AE Point Frame .............. 55 Spot Frame ............................. 22 T Telephoto ............ Basic Guide 8 Time Zone ........................ 30, 35 Transition Effects Playback ............................. 81 Slide Show ......................... 84 P Video Output System ............. 93 W White Balance ........................ 59 Wide Angle ............................... 8 Wireless Connecting to Printer .........98 Connecting/Disconnecting 1O0 Target Device ........... 102, 104 Wireless Print Adapter ........................... 18,26,98, 102 Wrist Strap .............................. 16 Z Zoom ................... Basic Guide 8 MEMO MEMO MEMO MEMO MEMO Trademark Acknowledgments • Canon, PowerShot, PIXMA and SELPHY are trademarks of Canon Inc • Macintosh, Mac OS and QuickTime are trademarks of Apple Computer Inc, registered in the United States and/or other countries • Microsoft ® and Windows ® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries • SD is a trademark. • Wi-Fi ® is a registered trademark of the Wi-Fi Alliance; and Wi-Fi CERTIFIED TM and WPA TM are trademarks of the Wi-Fi Alliance • All other product and service names mentioned herein are the marks of their respective owners • Other names and products not mentioned above may be registered trademarks or trademarks of their respective companies IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet. 142 Copyright© 2005Canon Inc. All dghtsreserved. FCCNotice (Digital Camera, Model PC1190NVireless Print Adapter, Model WA-1 N) Tested To Cmply F_ with FCCStar_fard_ FORHOMEORO_ICE USE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by fuming the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The cable with the ferrite core provided with the digital camera must be used with this equipment in order to comply with Class B limits in Subpart B of Part 15 of the FCC rules. Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon Plaza, Lake Success, NY 11042, U.S.A. Tel No. (516) 328-5600 Canadian Radio Interference Regulations This Class B digital apparatus complies with Canadian ICES-O03. R_glementation canadienne sur les interferences radio Cet appareil numCrique de la classe Best conforme a ia norme NMB-003 du Canada. l FunctionsAvailablein Each ShootingMode The chart below is a reference for the settings available for various shooting conditions. The settings selected in each shooting mode are saved after you finish shooting. a Foncfion [] [] [] [] [] [] [] II_•ta [] ,ll Page - p. 38 p. 40 - p. 39 m• Large [] Medium I [] Recording Medium 2 Pixels Small Postcard Movie [] [] [] Super Fine CompressiorFine Normal ] Frame Rate Auto [] [] p40 [] o O Autswith 0" Red-EyeReduction[] Flash(3) ............................ Onwith Red-EyeReduction[] o On [] - Off [] 0 O O O* SlowSynchro [] - A A* - Basic Guide p. 9 A - Macro Mode [] O O O O (s) A 0 Infinity Made [] - O O 0(2) A O Basic Guide p. 10 AF Lock [] - o o o O p. 52 AE Lock FE Lock [] [] - O O O O O [] p. 53 p. 54 - O*' O*' O*' O* O* A* O O* Coo_nuous Shooting[] 10-sec.Self-Timer[I o o o o o o O O O p. 43 A 2-sec. Self-limer [] Custom 11mer [] o o o o o o o - O O A O p. 45 - p. 44 p. 51 p. 33 Single Shooting Method Date Stamp Autofocus Modes AF-assist Beam 0 Function DigJ_Zoom _J [] I_ I_ i O" :_* Evaluative Metedng Method _'_ _] [] [] - _ I Page P, o- O 42 _l,0; £enter-WeightedAverage -O: :o: :o: ............................................... o o o Spot - Exposure Compensation o Exposure Shi_ - Long Shutter W_ite I - Balance - Photo Effect p. 55 Ip. 56 I - o p.49 - p. 57 _/_Q/ p. 5g -_'°>I:_I ISO Speed _(10 Auto Rotate _ Grid Lines _ p.62 _ : JlI __la; p. 69 - p. 70 : - _ p. 33 *DefauLt setting oSetting available A Setting can only be selected for the first image. (Shaded Area): Setting is retained even when the camera power is shut off. With the excelotion of the [77me ZoneJ, [Date/Time], [Language] and [Video System] settings, all the other menu settings and changes made with the camera buttons can be reset to the default values in a single operation (p. 37). (1)(2) The recording pixels and frame rates for the mlII (Movie) mode are as follows. [] (3) The default flash setting is Auto with Red-Eye Reduction modes, Auto in the [] _ modes, and Off in the [] [] in the [] modes. - The flash cannot be set in [] mode. When the flash fires in [] mode, the camera v4tt automatically mode. (4) The flash Jsset by default nat to fi_e in the [] _5) Yc_ cannot switch between modes. (6) (7) (8) AF cannot be selected in the [] [] modes, The AF-essist Beam cannot be set in [] mode. Can even be set during shooting (Standard only). (9) (10) Exposure compensafJon not ava#able Automatically set by the camera. (11) The Photo Effect cannot and m [] [] use Slow Synchro modes. the Mac_ol_nf_it'y modes when the carne[a is _ the [] in [] be set in the [] or [] mode. [] modes. []
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 147 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Thu Apr 05 20:10:12 2007 Author : Title : Subject :EXIF Metadata provided by EXIF.tools