CASTLES TECHNOLOGY VEGA3000-3G EFTPOS User Manual VEGA5000 Book 2

CASTLES TECHNOLOGY CO., LTD. EFTPOS VEGA5000 Book 2

User Manual

VEGA3000 EFT-POS Book 2 User Manual Confidential Version1.0 Jan 2015 CASTLES TECHNOLOGY Castles Technology Co., Ltd. 2F, No. 205, Sec. 3, Beixin Rd., XindianDistrict, New Taipei City 23143, Taiwan R.O.C. http://www.castech.com.tw
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 2 Revision History Version Date Descriptions 1.0 May 27, 2014 Initial creation. 1.1 Jan 14, 2015 Add FCC Warning
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 3 Contents 1. Introduction .................................................................................................................. 5 1.1. Type of Terminal .................................................................................................. 5 2. Hardware Setup ............................................................................................................ 7 2.1. Parts of the Terminal ........................................................................................... 7 2.2. Inserting the Battery ........................................................................................... 10 2.3. Inserting the SAM Card ..................................................................................... 11 2.4. Inserting the Paper Roll ..................................................................................... 12 2.5. Inserting the GSM SIM Card .............................................................................. 13 2.6. Inserting the Memory card ................................................................................. 14 2.7. Power Supply Specifications .............................................................................. 15 2.8. Operating Ambient Temperature ........................................................................ 15 3. Basic Operation ......................................................................................................... 16 3.1. Program Manager .............................................................................................. 16 3.2. Download AP ..................................................................................................... 16 3.3. System Info........................................................................................................ 18 3.4. Memory Status .................................................................................................. 19 3.5. System Settings ................................................................................................. 20 3.6. Test Utility .......................................................................................................... 23 3.7. Factory Reset .................................................................................................... 26 3.8. Power Off .......................................................................................................... 27 3.9. Function Key Password Change ........................................................................ 28 3.10. Share Object Management ................................................................................ 29 3.11. CastlesTMS ....................................................................................................... 30 3.12. Font Mng ........................................................................................................... 31 3.13. Debug Tools ...................................................................................................... 32 3.14. ULD Key Hash ................................................................................................... 33 3.15. Hardware Detect ................................................................................................ 34 4. Secure File Loading ................................................................................................... 35 4.1. ULD Key System ............................................................................................... 35 4.1.1. ULD Manufacturer Key ........................................................................... 35 4.1.2. ULD User Key ........................................................................................ 37 4.1.3. Key Change ........................................................................................... 37 4.2. File Signing ........................................................................................................ 38
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 4 4.2.1. Signing Kernel Module ........................................................................... 38 4.2.2. Signing User Files .................................................................................. 40 4.3. File Loading ....................................................................................................... 44 4.3.1. Download by User Loader ...................................................................... 44 4.3.2. Download by Removable Media ............................................................. 47 4.4. Changing ULD User Key.................................................................................... 49 5. Font Management ...................................................................................................... 56 5.1. Loading New Font.............................................................................................. 56 5.2. Custom Font ...................................................................................................... 59 5.3. Using TrueType Font (TTF) ............................................................................... 67 6. Technical Notes ......................................................................................................... 69 6.1. Serial Cable PIN Assignment ............................................................................. 69 7. FCC Warning .............................................................................................................. 70
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 5 1. Introduction This document provides a guideline on operating and configuringCastles VEGA3000 terminal. The scope of this document includesetting up the terminal, basic operation, application life cycle, and some advance features. 1.1. Type of Terminal VEGA3000 terminal is portable type can be battery operated. Portable type is designed as two pieces of hardware, handset and base unit. Handset unit features major components, and also optional contactless reader, WiFi, GRPS modem. Wired connection like power, modem, Ethernet, USB or serial ports, are be located in base unit. There are additional power connection and USB port on handset unit, allow the handset unit can be operated alone. Handset Base Front View Rear View Front View Rear View Side View
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 6 To start up the terminal needs to press “Power Button” key after the adapter connected.
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 7 2. Hardware Setup 2.1. Parts of the Terminal Front 1. LCD Display (Color TFT) 2. Privacy Shields 3. Keyboard 4. Cancel Key 5. Clear Key 6. Enter Key 7. Magnetic Stripe Reader 8. Smart Card Reader 9. Contactless Card Landing Zone 10. Paper Roll Handle VEGA3000 1 2 3 5 8 9 10 6 7 4
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 8 Rear 11. RechargeableBattery Cover 12. Battery Cover Lock 13. Base Connector 14. SAM Slots 15. Micro SD Card Slot 16. GSM SIM Card Slots 17. RTC Battery 18. Battery Connector VEGA3000 VEGA3000 VEGA3000 Rechargeable Battery 11 12 13 17 14 18 15 16
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 9 Side 19. Power Connector 20. USB Port Base (Portable) 21. Base Connector 22. Base LED 23. Power Connector 24. Com port 3 25. Com port 2 26. Com port 1 27. Modem - Line Port 28. Ethernet Port 29. Micro USB Port VEGA3000 Portable 19 20 21 22 23 24 25 26 29 27 28
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 10 2.2. Inserting the Battery Step 1: Remove battery cover Step 2: Insert battery into compartment, battery contact point must align with batteryconnector. Align Step 2 Step 1
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 11 2.3. Inserting the SAM Card Step 1: Remove battery cover / back cover Step 2: Insert SAM card into desire slot. SAM 1 & 2: Gold contact at lower side of card and facing right. SAM 3 & 4: Gold contact at lower side of card and facing left. VEGA3000 Portable SAM1 SAM2 SAM3 SAM4
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 12 2.4. Inserting the Paper Roll Step 1: Pulluppaper roll box handle. Step 2: Gentle open paper roll cover. Step 3: Insert paper roll as direction showed. Paper specification Width: 57mm Outside diameter: 40mm Step 2 Step 1 Step 3
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 13 2.5. Inserting the GSM SIM Card Step 1: Remove battery cover / back cover Step 2: Open SIM socket and insert GSM SIM card into desire slot. SIM 1 & 2: Gold contact at upper side of card and facing down. SIM2 SIM1 VEGA3000 Portable
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 14 2.6. Inserting the Memory card Step 1: Remove battery cover / back cover Step 2: Insert Micro SD memory card. Micro SD : Gold contact at lower side of card and facing right. Micro SD VEGA3000 Portable
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 15 2.7. Power Supply Specifications I/P: 9Vdc, 4A 2.8. Operating Ambient Temperature Range : 0° ~ 50°
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 16 3. Basic Operation 3.1. Program Manager Upon power on, terminal will enter Program Manager if not default application selected. All user applications are list in Program Manager. User may select an application and run the application or view the application info, delete the application or set to default run upon power on. User may enter System Menu to configure terminal settings. Program Manager  Press[0] button to enter System Menu.  Press [1] button to toggle default application selection.  Press [2] button to delete application.  Press [3] button to view application info.  Press [OK] button to run application.  Press [Power] or [．] buttonas up and down bottonto select application. System Menu Page 1 Page 2  Press [．] button to page 2. 3.2. Download AP Program Manager -----------01/02 1.App1 2.App2 0:Download System Menu 1.Download AP 2.System Info 3.Memory Status 4.Sys Settings 5.Test Utility 6.Factory Reset 7.Power Off 8.FK PWD Change 9.Share objMng Down: Next Page System Menu 1.Castles TMS 2.FontMng 3.Debug Tools 4.ULD KEY HASH 5.HW Detect Up:Prev Page
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 17 Download user application or kernel modules firmware. System Menu  Press [1] button to enter Download AP menu. Download AP Menu Select download source:  Press [1] button to select source as RS232 or USB connection and enter ULD download mode.  Press [2] button to select source as USB disk.  Press [3] button to select source as SD card. System Menu 1.Download AP 2.System Info 3.Memory Status 4.Sys Settings 5.Test Utility 6.Factory Reset 7.Power Off 8.FK PWD Change 9.Share objMng Down: Next Page Download EX 1.RS232 or USB 2.USB Disk 3.SD Card Select DW Source
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 18 3.3. System Info View kernel module firmware information. System Menu  Press [2] button to enter System Info menu. System Info Menu Page 1 Page 2 Page 3  Press [．] button to next page. Page 4 Page 5 Page 6 System Menu 1.Download AP 2.System Info 3.Memory Status 4.Sys Settings 5.Test Utility 6.Factory Reset 7.Power Off 8.FK PWD Change 9.Share objMng Down: Next Page SYSTEM INFO ---Kernel Ver--- BIOS : VR0016 SULD : VRF014 LINUXKNL: VR0019 ROOTFS : VR0010 SYSTEM INFO --- KOVer --- SECURITY: VR0025 KMS : VR0024 DRV: VR0039 USB: N/A SAM: VR0028 CL : VR0018 SC : VR0011 SYSTEM INFO --- SOVer--- UART : VR0014 USBH : VR0011 MODEM : VR0014 ETHERNET: VR0029 FONT : VR0025 LCD : VR0034 PRT: VR0020 RTC : VR0013 ULDPM : VR0022 PPP MODEM: VR0026 KMS: VR0025 FS : VR0015 GSM : VR0022 BARCODE : VR0013 SYSTEM INFO --- SO Ver2 --- TMS : VR0014 TLS : VR0011 CLVW : VR0019 CTOSAPI : VR0033 SYSTEM INFO --- HWMVer --- CRDL/ETHE:ONCHIP CLM-MP : N/A --- APVer --- ULDPM : VR0028 SYSTEM INFO HUSB ID:00000000 CUSBID:N/A --Factory S/N--- FFFFFFFFFFFFFFFF
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 19 Page 7 3.4. Memory Status View terminal flash memory and RAM information. System Menu  Press [3] button to enter Memory Status menu. Memory Status Menu SYSTEM INFO -EXT SO Ver P.1 - CRDLMDL : VR0100 CACLENTRY: VR0100 CAMPP: VR0300 CAVPM : VR0012 CAEMVL2 : VR0013 CAEMVL2AP: VR0004 System Menu 1.Download AP 2.System Info 3.Memory Status 4.Sys Settings 5.Test Utility 6.Factory Reset 7.Power Off 8.FK PWD Change 9.Share objMng Down: Next Page MEMORY STATUS --FLASH Memory-- Total: 31616KB Used : 22640KB --SDRAM Memory-- Total: 31872KB Used : 10908KB
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 20 3.5. System Settings View or change terminal system settings. Setting Descriptions Key Sound Enable (Y) or disable (N) the beep sound when pressing any key. Exec DFLT AP Enable (Y) or disable (N) execution of default selected application. USB CDC Mode Enable (Y) or disable (N) USB CDC mode. FunKey PWD Enable (Y) or disable (N) password protection to access function key (0 ~ 3) in Program Manager. PMEnter PWD Enable (Y) or disable (N) password protection to enter Program Manager. SET USB Host Enable (Y) or disable (N) USB host mode. Base USB CDC Enable (Y) or disable (N) USB CDC mode in base unit. [Portable model only] List SHR Lib Enable (Y) or disable (N) to list all shared libraries in Program Manager. Key MNG Mode <TBC> Bat Threshld Battery charging threshold value. [Portable model only] Null Cradle Enable (Y) if base is null cradle. [Portable model only] Debug Mode Enable (Y) or disable (N) console debug mode. Debug Port Serial port for console debug. Mobil AutoON Enable (Y) or disable (N) to auto turn on GSM module after start up the terminal. Bklit Auto Off Enable (Y) or disable (N) Auto OffLCDBacklight Bklit Off Time Thresholdof Auto Off LCD Backlight PWR KEY OFF Enable (Y) or disable (N) Power key rebooting GDB Mode Enable (Y) or disable (N) GDB mode. GDB Timeout GDB connection timeout. GDB Channel GDB connection channel. ETHER IP/PORT GDB Ethernet connection setting. RTC Time Zone Set Time Zone of Real Time Clock. NTP Enable Enable (Y) or disable (N) Network Time Protocol.
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 21 NTP Update Freq Frequency of Network Time Protocol updating. System Menu  Press [4] button to enter System Settings menu. System Settings Menu Page 1        Press [Power] or [．]button to select setting.  Press [OK] button to change the setting value.  Press [] button to toggle Y  N  Y.  Press [2] button to next page. System Menu 1.Download AP 2.System Info 3.Memory Status 4.Sys Settings 5.Test Utility 6.Factory Reset 7.Power Off 8.FK PWD Change 9.Share objMng Down: Next Page SYS SETTINGS Key Sound : Y Exec DFLT AP: Y -AP Name USB CDC Mode: Y FunKeyPWD :N PMEnterPWD:N SET USB Host: N Base USB CDC: X List SHR Lib: N Key MNG Mode: 0 Bat Threshld: X Null Cradle : X Debug Mode :N Debug Port :X 2: Next Page
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 22 Page 2  Press [Power] or [．]button to select setting.  Press [OK] button to change the setting value.  Press [] button to toggle Y  N  Y.  Press [1] button to previous page.  Press [2] button to next page. SYS SETTINGS Mobil AutoON: N Bklit Auto Off:X Bklit Off Time: N PWR KEY OFF:N GDB Mode:X GDB Timeout: X ETHER IP/PORT RTC Time Zone :GMT NTP Enable:N NTP Update Freq:X 1:PrevPage
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 23 3.6. Test Utility Perform terminal hardware components diagnostic. System Menu  Press [5] button to enter Test Utility menu. Test Utility Menu Page 1  Press [1] and [OK] button to diagnose LCD.  Press [2] and [OK] button to diagnose keyboard.  Press [3] and [OK] button to diagnose flash memory.  Press [4] and [OK] button to diagnose smart card module.  Press [5] and [OK] button to diagnose backlight.  Press [6] and [OK] button to diagnose magnetic stripe reader. System Menu 1.Download AP 2.System Info 3.Memory Status 4.Sys Settings 5.Test Utility 6.Factory Reset 7.Power Off 8.FK PWD Change 9.Share objMng Down: Next Page Main Menu 0014 1:LCD 2:Key Board 3:FLASH 4:Smart Card 5:Backlight 6:MSR 7:LED 8:RTC 9:Printer 10:FONT 11:CL_Transparent 12:CL Card Test 13:SD Card Test 14:Wi-Fi Test  1/2
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 24  Press [7] and [OK] button to diagnose LED.  Press [8] and [OK] button to diagnose real time clock.  Press [9] and [OK] button to diagnose printer.  Press [1], [0]and [OK] button to view font.  Press [1], [1] and [OK] button to diagnose contactless reader in transparent mode.  Press [1], [2]and [OK] button to diagnose contactless card.  Press [1], [3] and [OK] button to diagnose SD memory card.  Press [1], [4] and [OK] button to test Wi-Fi.  Press [．] button to next page. Note: Default password for changing RTC is 8418. Page 2  Press [1], [5]and [OK]button to enter Power Saving Test Menu.  Press [1], [6] and [OK] button to enter Communication Test Menu.  Press [Power] button to previous page.  Press [X] button to exit. Power Saving Test Menu  Press [1] button to Standby Mode.  Press [2] button to Sleep Mode. Main Menu 0014 15:Power Saving 16:Comm Menu  2/2 Power Saving Test 1. Standby Mode 2. Sleep Mode
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 25 Communication Test Menu  Press [1] button to diagnose Com 1.  Press [2] button to diagnose Com 2.  Press [3] button to diagnose Com 3.  Press [4] button to diagnose Ethernet module.  Press [5] button to diagnose USB.  Press [6] button to diagnose modem.  Press [7] button to diagnose GPRS.  Press [8] button to diagnose all, from item 1 to 7. Communicate Test 1. COM1 2. Com2 3. Com3 4. Ethernet Test 5. USB Test 6. Modem Test 7. GPRS Test 8. All Test
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 26 3.7. Factory Reset Perform factory reset, all user application, fonts and data will be deleted. System Menu  Press [6] button to enter Factory Reset menu. Factory Reset Menu  Press [OK] button to perform factory reset.  Enter factory reset password.Default password: 8418 System Menu 1.Download AP 2.System Info 3.Memory Status 4.Sys Settings 5.Test Utility 6.Factory Reset 7.Power Off 8.FK PWD Change 9.Share objMng Down: Next Page Factory Reset OK to reset ? Factory Reset Password : ****
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 27 3.8. Power Off Power off terminal. System Menu  Press [7] button to power off terminal. System Menu 1.Download AP 2.System Info 3.Memory Status 4.Sys Settings 5.Test Utility 6.Factory Reset 7.Power Off 8.FK PWD Change 9.Share objMng Down: Next Page
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 28 3.9. Function Key Password Change Change function key access password. System Menu  Press [8] button to enter FunKey Password menu. FunKey Password Menu  Enter current password. (Default password is "0000")  Enter new password.  Enter new password again to confirm. FunKey Password Enter Password: **** FunKey Password New Password: **** Confirm Password **** FunKey Password New Password: **** Confirm Password **** PWD Changed OK System Menu 1.Download AP 2.System Info 3.Memory Status 4.Sys Settings 5.Test Utility 6.Factory Reset 7.Power Off 8.FK PWD Change 9.Share objMng Down: Next Page
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 29 3.10. Share Object Management View share object in terminal. System Menu  Press [9] button to enter Share Object Management menu. Share Object Management Menu  Press [1] button to view shared library.  Press [2] button to view shared file. Share objMng 1.Share LIB 2.Share File System Menu 1.Download AP 2.System Info 3.Memory Status 4.Sys Settings 5.Test Utility 6.Factory Reset 7.Power Off 8.FK PWD Change 9.Share objMng Down: Next Page
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 30 3.11. CastlesTMS Connect to TMS (Terminal Management Software) server, set or delete TMS configuration. System Menu (Page 2)  Press [1] button to enter Castles TMS menu. Castles TMS Menu  Press [1] button to connect to TMS server.  Press [2] button to set TMS configuration.  Press [3] button to delete TMS configuration. System Menu 1.Castles TMS 2.Font Mng 3.Debug Tools 4.ULD KEY HASH 5.HW Detect Up:Prev Page CASTLES TMS 1.Connect Server 2.SetConfig 3.DelConfig
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 31 3.12. Font Mng View Font Management. System Menu (Page 2)  Press [2] button to view Font Management. FontManagment  Press [1] button to view FNT Font list.  Press [2] button to view TTF Font list. Font Mng 1.FNT File 2.TTF File System Menu 1.Castles TMS 2.Font Mng 3.Debug Tools 4.ULD KEY HASH 5.HW Detect Up:Prev Page
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 32 3.13. Debug Tools Perform the Debug Tools. System Menu (Page 2)  Press [3] go to the Debug Tools Menu. Debug Tools  Press [1] go get the Core Dump error from terminal.  Press [2] go to the Debug Log Menu. Debug Log  Press [1] get the Debug Log from the memory of terminal to SD card.  Press [2] clean all the Debug Log from the SD card. System Menu 1.Castles TMS 2.Font Mng 3.Debug Tools 4.ULD KEY HASH 5.HW Detect Up:Prev Page Debug Tools 1.CoreDump 2.Debug Log Debug Log 1.Upload 2.Clean All
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 33 3.14. ULD Key Hash View ULD user keyset hash value. System Menu (Page 2)  Press [4] button to view hash value. System Menu 1.Castles TMS 2.Font Mng 3.Debug Tools 4.ULD KEY HASH 5.HW Detect Up:Prev Page USER ENC KEY 9572BC621C1D5406 0856D00BCC207000 D3320077 USER SIGN KEY A927768EA7DD7B9E 7E3F395C10726B6F 43B35C5A
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 34 3.15. Hardware Detect View the hardware type of the termianl. System Menu (Page 2)  Press [5] button to view the hardware type of the termianl. System Menu 1.Castles TMS 2.Font Mng 3.Debug Tools 4.ULD KEY HASH 5.HW Detect Up:Prev Page HW TYPE Qriginal HW-TYPE :MEGC New HW-TYPE :MEGC Please Any Key.
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 35 4. Secure File Loading Castles implemented an interface in terminal named User Loader(ULD) to provide secure file loading to system memory. Loading of user application, kernel firmware, font and others must use User Loader. The loading process is secure by signing the files using ULD Key System. 4.1. ULD Key System The ULD Key System uses two key sets for securely managing the kernel updating and application downloading. Each key set contains two RSA key pairs. One is used for key encryption and the other is used for signature. These two key sets are specified as below: ULD Manufacturer Key Set  ULD Manufacturer Key Encryption Key (RSA)  ULD Manufacturer Signature Key (RSA) ULD User Key Set  ULD User Key Encryption Key (RSA)  ULD User Signature Key (RSA) For VEGA3000, the RSA key length is 2048bits. 4.1.1. ULD Manufacturer Key The system consists of several kernel modules. These kernel modules are provided by the Manufacturer, and released in CAP format file with encryption and signing via ULD Manufacturer Keys. The ULD Manufacturer keys are managed and maintained by the manufacturer. The manufacturer uses these keys to generate kernel CAP files for updating the system. However, the system is not permited to be updated with these kernel CAP files directly generated by the manufacturer. This is because only the user can have the privilege to decide whether the system is to be updated. Therefore, before system
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 36 updating, the kernel CAP files must be “signed” via ULD User Key to get the user permission. For simple expression, we call the kernel CAP files generated by the manufacturer as “unsigned kernel CAP(s)” and call the kernel CAP files “signed” by the user later as “signed kenel CAP(s)”. Notes: 1. Tthe kernel modules are encrypted by a random-generated 3DES key, which is retrieved from the Key Encryption Block of the CAP by ULD Manufacturer Key Encryption Key, not directly encrypted by ULD RSA Key. 2. The “sign” action via ULD User Keys actually is done by” the second encryption”. “The second encryption” is done by using the random-generated 3DES key, which is encrypted by ULD User Key Encryption Key, to perform Triple DES encryption again on the cipher data segment of the kernel CAP files. This ensures that the system cannot retrieve the correct data from the kernel CAPs without the user permission. CAP GeneratorKernel ModuleULD Manufacturer KeysUnsigned Kernel CAPsUnsigned Kernel CAPs CAP Signing Tool Signed Kernel CAPsULD User Keys
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 37 4.1.2. ULD User Key ULD User Key are used to encrypt and sign the user/shared applications. In addition, they are as goalkeepers to prevent the system updating without user permission. This is done by the kernel CAPs which are encrypted and signed by the manufacturer having to perform the “signed’ action via ULD User Keys. Notes: Applications are encrypted by a random-generated 3DES key, which is retrieved from the Key Encryption Block of the CAP by ULD User Key Encryption Key, not directly encrypted by ULD RSA Key. Application Application CAPsULD User KeysCAP Generator 4.1.3. Key Change The ULD RSA Keys are able to be changed. The system uses a special CAP file, KEY CAP, for the manufacturer and user to change their own keys. The KEY CAP contains a new set of ULD keys (Key Encryption Key and Signature Key). These new keys are encrypted and signed via the original keys. In other words, if the user would like to change the ULD User Keys, they have to use their original ULD User Keys with the new ULD User Keys to generate a KEY CAP. Key CAP GeneratorOriginal ULD Manufacturer/User KeysNew ULD Manufacturer/User KeysUser KEY CAP
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 38 4.2. File Signing 4.2.1. Signing Kernel Module Castles will release new version of kernel module in “unsigned” form. This files required to sign with ULD User Key before it can load to terminal. Castles Technology provideds a tool named “CAP Signing Tool” to perform this task. The CAP Signing Tool is located at: C:\Program Files\Castles\VEGA3000\tools\Signing Tool  Run CAP Signing Tool (VEGA3000)  Insert Key Card and select smart card reader
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 39  Enter Key Card PIN  CAP Signing Tool is ready, press “Select MCI File” button to browse the file.  Output file will be located in “signed” folder.
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 40 4.2.2. Signing User Files Following files are required to sign before load to terminal. This is to ensure the application data and codes confidential and integrity. The output fille will be “CAP” file which is file format defined by Castles.  User application  User application data files  User application library  Font file  Share library  Share files  System setting  Key CAP (Manufacturer ULD Key Set) Castles Technology provided a tool named “CAP Generator” to perform this task. The CAP Generator is located at: C:\Program Files\Castles\VEGA3000\tools\CAPG (KeyCard)  Run CAP Generator
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 41  Insert Key Card and select smart card reader  Enter Key Card PIN
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 42  CAP Generator is ready, select the correct Type from the list.  Press “Step 1: Select AP Executable File” to select file to sign. This is valid for all the files to sign.
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 43  Enter file details and press “Step 2: Sign Application” to sign the file. This is valid for all the files to sign.  The output file will be in a set. A “mci” file with one or more “CAP” files.CAP file contents the signed file binaries, where MCI file contents the list of CAP files. Note: If user would like to load multiple set of signed file, create a new file with extension of “mmci”. Then put the mmci file contents with the list of mci file. App.CAP App.mci MultiApp.mmci
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 44 4.3. File Loading There are several ways of loading file to VEGA3000terminal.  Download by User Loader  Download by removable media  Download by user application  Download by Castles TMS User Loader is a tool provided by Castles Technology. It’s the formal way to download file to terminal. User may implement their own ways of updating application or files using CTOS API provided, CTOS_UpdateFromMMCI(). Castles TMS (CTMS or CASTLES Terminal Management System) is provided by Castles Technology. It’s use to perform remote download via Ethernet, GPRS/UMTS or modem. 4.3.1. Download by User Loader The User Loader works for VEGA3000. The Loader is located at: C:\Program Files\Castles\VEGA3000\tools\Loader  Run User Loader
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 45  Select COM port  Browse and select mci file or mmci file  Setup terminal to enter download mode  Press [0] button in Program Manager (PM)  Press [1] button to select “1. Download AP“  Press [1] button again to select download via RS232 or USB
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 46  Press “Download” button to start. Note: To download using USB cable, terminal must enable CDC mode. Set USB CDC Mode to Y. SYS SETTINGS Key Sound : Y Exec DFLT AP: Y -AP Name USB CDC Mode: Y FunKeyPWD : N PMEnterPWD : N SET USB Host: N Base USB CDC: X List SHR Lib: N Key MNG Mode: 0 Bat Threshld: X Null Cradle : X Debug Mode : N Debug Port : X 2: Next Page
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 47 4.3.2. Download by Removable Media The file download process can be achieved without PC by using removable media, USB flash drive or MicroSD memory card. We recommend don’t put unwantedfile to removable media, as it will increase the time during detection.  Create a folder name “vxupdate” under root directory.  Place the mci file and cap file to “vxupdate” folder. Note: If user would like to load multiple application, create a new file with extension of “mmci”. Then put the mmci file contents with the list of mci file. root vxupdate root vxupdate App.CAP App.mci MultiApp.mmci
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 48  Insert removable media to terminal, and select the removable media type in “Download AP” menu. Download AP Menu o Press [2] button to select USB flash drive. o Press [3] button to select MicroSD card.  Finally, terminal will process the file “vxupdate” folder. Download EX 1.RS232 or USB 2.USB Disk 3.SD Card Select DW Source
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 49 4.4. Changing ULD User Key User may change their ULD User Key Set stored in Key Card. Castles Technology provided a tool named “Secure Key Generator” to perform this task.  Run Secure Key Generator  Insert Key Card and select smart card reader  Enter Key Card PIN, default PIN is “1234”.
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 50  To change Key Card PIN, press “Update PIN” button. If not, please skip this steps.  Enter new PIN, enter new PIN again to confirm, then press [Enter] button to change PIN in Key Card.
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 51  To view current key set hash value, goto “Option” and select key.
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 52  To generate new user key set  Please generate the RSA key by yourself,thelength of the RSA key set should be 2048 (bits).  Copy RSA key components to RSA Key for Kenc in Secure Key Generator.
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 53  Generate second RSA key set for Signature.
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 54  Click [Get Hash] button to calculate the hash value for key sets.  Please copy down all the values into a text file and keep in a safe place. You will need this if you need to create duplicate Key Card.  To generate the key CAP for the newly generated user key set, press [Make Key CAP File] button.
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 55  The output file will be located in the Secure Key Generator folder.  To update the newly generated key set to Key Card, press [Save to Card] button to write the key set to Key Card. SecureKeyGenerator key.mci key.cap
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 56 5. Font Management 5.1. Loading New Font  Run FontManager.exe Located at C:\Program Files\Castles\Font Manager  Select font to download
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 57  Press [Setting] button to configure terminal type.  Select VEGA5000, press [Save] button to save and return font manager.  Press [Generate] to create the font file.
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 58  Output file “Font.FNT” will be located at sub-directory named “Font” in “Font Manager” folder.  Sign the file using CAP Generator, the type must set to “11 – Linux Font”.  Lastly, download the signed file (CAP file) to terminal using Loader. Font Manager Font Font.FNT
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 59 5.2. Custom Font User may create font they preferred for displaying or printing on terminal. There are two zone defined: Zone 0x00 ~ 0x7F – ASCII characters, you may replace with the font type preferred or your own language character set. Zone 0x80 ~ 0xFF – Free to use, you may use for symbols. Following steps demonstrate how to create a 12x24 font.  Run GLCD Font Creator  Select [File]  [New Font]  [Import An Existing System Font]
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 60  Select the font needed, simply choose a font size. The final value of font size should be determine by the minimum pixel width. You may need to repeat this steps few times to find the best fit font size.  Set the import range from 0 to 127.
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 61  Check the minimum pixel width and height.  If the pixel width of the font size is larger than expected, then you have to repeat the previous steps to import font with smaller size.  Use the following buttons to adjust the font size to match with expected font size. Add row on top Add row on bottom Remove row on top Remove row on bottom Add column on left Add columnonright Removecolumnonleft Removecolumnonright
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 62  After adjust font size, select [File]  [Export for MicroElektronika].  Select output format as [mikroC].
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 63  Remove comment “// Code for char “ from offset 0x00 to 0x1F. Remove empty line if found. Then click [Save] button to save to file.  Run Font Manager Tool.  Click [Setting] button Remove Remove Remove Remove
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 64  Enter the file name, font id, and select the size.  Click [Create] button, and select the C file previously created using GLCD Font Generator.
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 65  Select [Font Manager] tab and tick the newly createdfont, and press [Generate] button to export to FNT file.
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 66  Use CAP Generator to conver the FNT file to CAP. Set type to [11 – Linux Font], press [Step 1] button select the FNT file. Then press [Step 2] to generate CAP file.  Download the font CAP file to terminal.  In terminal application, add following code to display message using the newly created font. CTOS_LanguageConfig(0xA000,d_FONT_12x24,0,d_FALSE); CTOS_LanguageLCDSelectASCII(0xA000); CTOS_LCDTPrintXY(1, 1, "ABCDEFGH"); Or print message using the newly created font. CTOS_LanguagePrinterSelectASCII(0xA000); CTOS_PrinterPutString("ABCDEFGH");
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 67 5.3. Using TrueType Font (TTF) TrueType Font (TTF) is only supported in VEGA5000S terminal.You may download the TrueType font preferred to terminal for displaying or printing. Following steps demonstrate how to use “Cooper Black” TrueType font.  Copy the TTF file needed to a empty folder.  Use CAP Generator to conver the TTF file to CAP. Set type to [11 – Linux Font], press [Step 1] button select the TTF file. Then press [Step 2] to generate CAP file.  Download the font CAP file to terminal. TTF COOPBL.TTF
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 68  In terminal application, add following code to display message using the newly added font. CTOS_LCDTTFSelect("COOPBL.TTF", 0); CTOS_LCDFontSelectMode(d_FONT_TTF_MODE); CTOS_LCDTSelectFontSize(0x203C); // 32x60 CTOS_LCDTClearDisplay(); CTOS_LCDTPrintXY(1, 1, "Hello World"); Or print message using the newly added font. CTOS_PrinterTTFSelect("COOPBL.TTF", 0); CTOS_PrinterFontSelectMode(d_FONT_TTF_MODE); CTOS_LanguagePrinterFontSize(0x203C, 0, 0); // 32x60 CTOS_PrinterPutString("Hello World");
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 69 6. Technical Notes 6.1. Serial Cable PIN Assignment RJ12 6P6C Male Plug RS232 Female 1 ○ 2 ○ 3 ○ 4 ○ 5 ○ 6 ○ ○ 1 ○ 2 ○ 3 ○ 4 ○ 5 ○ 6 ○ 7 ○ 8 ○ 9 VCC TXD RTS RXD CTS GND VCC RXD TXD GND RTS CTS
Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg. 70 7. FCC Warning Federal Communication Commission interference statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC Caution This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation RF Exposure Warning The equipment complies with RF exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. ~ END ~

Navigation menu