CDVI WIRELESS S P A DTFT01 Part 15 Security/Remote Control Transmitter User Manual tx DTF
CDVI WIRELESS S.P.A. Part 15 Security/Remote Control Transmitter tx DTF
15_DIGITAG-F_UserMan
4.0 Led Messages The tag is equipped with a tri-colour led which gives the following information: DIGITAG-F 1.0 ! Tag activity: the led makes a flash every 5 radio transmissions, for battery saving reasons. Product introduction The Digitag-F type DTFT01 is a radio active tag, operating at 433,92 MHz in GFSK modulation. The tag transmits continously a radio pulse with a period of 1 sec. A special algorithm adds to the rated time period a small slot, realizing, in this way, an anticollision system, which avoids the overlapping of the RF signals of many tags when standing simultaneously in the same field. 2.0 battery, according to the following table: Tri-colour led Product range P/N DTFT01 Description F-Code F0104000050 Active tag Active tag with build-in DTFT01HR 125 KHz HID passive tag 3.0 ! Battery status: the colour of the flash gives the status of the F0104000049 Fig. 1 Technical specifications Operating frequency: Modulation: Frequency deviation: E.r.p. power: Transmission period: Frame duration: Power supply: Battery: Security code combinations: Range in open space: Operating temperature: Dimensions: Weight: 433.92 MHz GFSK 100 KHz 4 ìW 1 Sec + anticollision slot 555 ìSec 3 Vdc Lithium CR2032 16777215 20 m -30°C / +70 °C 61 x 36 x 16 mm 20 gr. Led colour GREEN ORANGE RED Description Regular status: battery life 1 year Battery low: the functionality of the tag is guaranted for 1 month Battery empty :Change battery : tag functionality not guaranted. FCC ID : PWJDTFT01 LED This device complies with Part. 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept interference received, including interference that may cause undesired operation. Guarantee Fig. 2 Battery door Key-holder ring The guarantee period of this product is 24 months, beginning from the manufacturing date. During this period, if the product does not work correctly, due to a defective component, it will be repaired or substituted at the discretion of the producer. The guarantee does not cover the plastic container integrity. After-sale service is supplied at the manufacturer factory. RF EXPOSURE WARNING Battery access CR2032 Fig. 3 Contact (+) Fig. 4 This EUT is in compliance with MPE for general population / uncontrolled exposure limits and it had been tested in accordance with the measurement methods and procedures specified in FCC 47 CFR § 1.1310 and 2.1091 To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance are not recommended. The antenna used for this transmitter must not be co-located in conjunction with any other antenna or transmitter. Contact (-) ATTENTION: the tag is provided with a transparent strip which prevents the automatic transmission. Remove it before use. IS-DTF01UK Rev. 1 on 13/05/2013 Manufactured by ELPRO INNOTEK S.p.A. - CDVI GROUP Via Piave, 23 31020 S.Pietro di Feletto (TV) - ITALY
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 2 Create Date : D:20130620130448Z Modify Date : D:20130620130448Z Producer : Corel PDF Engine Version 14.0.0.567 Author : GM.DalleCarbonare Creator : CorelDRAW Title : tx-DTF.cdrEXIF Metadata provided by EXIF.tools