CDVI WIRELESS S P A S3RT Part 15 Security / Remote Control Transmitter User Manual PWJS3RT UserMan

Download:
Mirror Download [FCC.gov]
Document ID	2277211
Application ID	rxTu3pLKYRo/xlgu4AOU5w==
Document Description	PWJS3RT_UserMan
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	63.52kB (794042 bits)
Date Submitted	2014-05-27 00:00:00
Date Available	2014-05-27 00:00:00
Creation Date	2014-04-02 14:19:11
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2014-04-02 14:19:13
Document Title	PWJS3RT_UserMan
Document Creator	Adobe InDesign CS6 (Windows)

The Installer’s Choice
www.cdvi.ca
WIRELESS TECHNOLOGY
Radium
Remote control
R1
R4
R2
1 - INTRODUCTION
The remote control RADIUM R1 - R2 - R4 is a 1-2-4 buttons key chain style transmitter, operating at 433,92
MHz. It has been designed for the control of automatic closing systems and anti-burglar systems, thanks to
its very high security coding system (KeeLoq® Hopping code). The code sent by the transmitter changes at
each activation, avoiding any scanning and copying risk. A special algorithm allows to keep synchronized
transmitter and receiver. The transmitter can be equipped with passive tag ( see table for the reference ) The
CR 2016 lithium batteries of the transmitter have a shelf life of about 6 months. The product fully complies
with Part 15 of FCC Regulations and the European Directives 2006/95/CE, 2004/108/CE, 99/05/CE.
2 - TECHNICAL SPECIFICATIONS
Operating frequency:		
Number of buttons:		
Battery:		
Battery life:		
Security code:		
Number combinations:		
Operating temperature: 		
Overall dimensions:		
Weight:		
3 - PRODUCT RANGE
433,92 MHz
1-2-4
2 x 3V lithium CR2016
18 to 24 months
Keeloq® Hopping code
2exp64
-20°F to +131°F
2.83”x 1.4”x 0.47”
0.49 oz. (14 gr.)
P/N
Description
Tag ( 125 KHz )
R1
1 Button Remote
R1H
1 Button Remote
HID
R1P
1 Button Remote
Paradox
R1C
1 Button Remote
CDVI
R2
2 Buttons Remote
R2H
2 Buttons Remote
HID
R2P
2 Buttons Remote
Paradox
R2C
2 Buttons Remote
CDVI
R4
4 Buttons Remote
R4H
4 Buttons Remote
HID
R4P
4 Buttons Remote
Paradox
R4C
4 Buttons Remote
CDVI
w w w. c d v i . c a
The Installer’s Choice
4 - NUMBERING
5 - MAIN COMPONENTS
Each transmitter is manufactured and sold with a different factory-set serial number.
6 - PROGRAMMING
The transmitter must be programmed into your system
memory.
Blue LED
Button A
Button D
Button C
Button B
7 - OPERATION
A - Firmly depress the button until the small red BLUE
illuminates.
B - After the LED has illuminated, release the button.
If the device you are attempting to activate does not respond, repeat steps A and B or consult section 9
( Troubleshooting ) of this manual.
Key ring
Slide to
open
2 x CR2016
8 - BATTERY ACCESS
To access the battery slide out the battery door as shown
in figure. Slide out the 2 old batteries and replace them
with the new ones [CR2016] respecting the polarity, with
the positive (+) side upward.
NOTE: Please dispose of the batteries properly according
to local laws and regulations. Test proper battery installation by verifying that the LED illuminates when the
button is pushed.
FCC ID : PWJS3RT
9 - TROUBLESHOOTING
PROBLEM
Battery door
SOLUTION
The system does not receive the
transmitter signal.
The transmitter LED is ON
Check to verify if the remote
is programmed into your system
The operating range is reduced
The transmitter LED is blinking
Low battery : replace batteries
The system does responds.
The transmitter LED is OFF
Battery empty : replace batteries
This device complies with Part. 15 of the FCC Rules
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept interference received, including interference that may cause undesired operation.
This EUT is in compliance with MPE for general population
/ uncontrolled exposure limits and it had been tested in
accordance with the measurement methods and procedures
specified in FCC 47 CFR § 1.1310 and 2.1091 .
To satisfy FCC RF exposure requirements for mobile transmitting devices,
a separation distance of 20 cm or more should be maintained between
the antenna of this device and persons during device operation. To ensure
compliance, operations at closer than this distance are not recommended.
The antenna used for this transmitter must not be co-located in conjunction
with any other antenna or transmitter.
Notice
Any changes or modification to CDVI equipment not expressly
approved by CDVI could void the manufacturer’s warranty.
Manufactured by:
CDVI Wireless
Made in ITALY
IS-T15CDUK Rev. 0 15/1/2014
WARRANTY
The warranty period for this product is 60 months, beginning from
the manufacturer date. During this period, if the product does not
work correctly, due to a defective component, the product will be
repaired or substituted at our discretion. The guarantee does not
cover the plastic container integrity. After-sale service is supplied
at the factory.
CDVI 1637 Highway 440 West, Laval, Québec, Canada, H7L3W3
Tel: (450) 682-7945, Toll Free Tel: 1-866-610-0102,
Fax: (450) 682-9590, Toll Free Fax: 1-866-682-9590

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Create Date                     : 2014:04:02 14:19:11+02:00
Metadata Date                   : 2014:04:02 14:19:13+02:00
Modify Date                     : 2014:04:02 14:19:13+02:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:047681a5-3f81-4002-91ac-bbc52f836798
Original Document ID            : xmp.did:21F5AF28BD7EE311A139FB347AD78BF0
Document ID                     : xmp.id:4245A4FF60BAE311B080B1EB12DEB900
Rendition Class                 : proof:pdf
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2014:04:02 14:19:11+02:00
Derived From Instance ID        : xmp.iid:AC9BCFFA5FBAE311B080B1EB12DEB900
Derived From Document ID        : xmp.did:21F5AF28BD7EE311A139FB347AD78BF0
Derived From Original Document ID: xmp.did:21F5AF28BD7EE311A139FB347AD78BF0
Derived From Rendition Class    : default
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools