CELLUON CL800BT Projection Keyboard User Manual Celluon CL800BT English

CELLUON, INC. Projection Keyboard Celluon CL800BT English

Users Manual

CL800BT MANUAL 2 Safety Precautions  Avoid long time expose to the direct light or heat.  Faults may occur if kept in extreme of temperatures.  May become damaged if dropped or knocked.  Problems may occur if exposed to humid and/or dusty conditions.  Do not use if power cable or plug are damaged.  Use only dedicated cable/adapter.  Do not disassemble.  Do not look directly at the light source, as this can cause damage to the eye.
CL800BT MANUAL 3 Regulatory Information FCC compliance Information This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio Frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
CL800BT MANUAL 4 - Redirect or reposition the receiving antenna - Increase the separation between the equipment and receiver - Connect the equipment to a socket on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC WARNING: This equipment may generate or use radio-frequency energy. Changes or modifications to this equipment may cause harmful interference, unless such modifications are expressly approved in the instruction manual. The user’s license to operate this equipment may be revoked if an unauthorized change or modification is made. RF Exposure Information: The antenna used for this transmitter must be installed at a distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. CE : EN300328 EN301489 EN60950
CL800BT MANUAL 5 Laser Safety: Product is certified by the manufacturer to comply with DHHS Rules 21 CFR Subchapter J. Applicable at the date of manufacture. Environmental Notice This product does not any materials specified harmful to the human body. At the end of this product’s service life, please separate with the life waste and discharge or go to the Celluon service center for environmental protection.
CL800BT MANUAL 6 Battery Information Battery service life: 220 minutes continuous use (max) Capacity: 830mAh (max) @ 3.7V Charging the Battery Use the adapter supplied for connection to the power supply. The battery will now start charging. Charging time: 150 min Caution - Use of any other adapter may cause the battery to explode. - After purchasing the product, charge the battery before use. - Charging time is dependent on ambient temperature i.e. it may be longer or shorter in extreme heat or cold. - It is possible that the battery is not fully charged even when the charging indicator is illuminated. - Since battery belongs to expendable supplies, service life gradually shortens after several uses.
CL800BT MANUAL 7 Table Contents 1. FEATURES...................................................................................9 2. COMPONENTS..........................................................................10 3. PARTS AND THEIR FUNCTIONS .............................................11 3.1 FRONT..................................................................................11 3.2 REAR....................................................................................12 3.3 TOP......................................................................................13 4. HOW TO OPERATE...................................................................14 4.1 INSTALLATION..........................................................................14 4.2 IN BLUETOOTH MODE............................................................15 5. HOW TO INSTALL, REMOVE AND USE SOFTWARE.............15 5.1 POCKET PC ............................................................................15 5.1.1 System Requirements .................................................15 5.1.2 Installation/Upgrading/Uninstalling the Driver..............15 5.1.3 Connection Method......................................................18 5.1.4 Disabling the Projection Keyboard Sound ...................22 5.1.5 PK Settings Application................................................23 5.1.6 Tutorial .........................................................................33 5.1.7 Shortcut Icon Keys.......................................................34 5.1.8 Function Key and Ctrl Key...........................................35
CL800BT MANUAL 8 5.2 PALM OS............................................................................36 5.2.1 System Requirements .................................................36 5.2.2 Installation/Upgrading/Uninstalling...............................36 5.2.4 PK Settings..................................................................44 5.2.5 PK Tutorial ...................................................................49 5.2.6 Shortcut Icon Keys.......................................................52 5.2.7 Shortcut Keys ..............................................................53 6. KEYBOARD LAYOUT................................................................55 7. TYPING LATIN LETTERS AND ADDITIONAL CHARACTERS.55 8. ADJUSTING KEY SENSITIVITY................................................58 9. SAFETY PRECAUTIONS ..........................................................60 10. TROUBLESHOOTING .............................................................62 11. SPECIFICATIONS AND DEMENSIONS ..................................64
CL800BT MANUAL 9 1. Features Uses normal QWERTY keyboard layout. Compact size (convenient to carry). Includes function and shortcut icon keys. Robust and durable, uses optical technologies Bluetooth and serial port interface connections. Rapid entry keys. Economical, uses an integrated, rechargeable lithium battery. Compatible with Pocket PC, Palm OS and Windows.
CL800BT MANUAL 10 2. Components Serial cable is optional. (refer to http://www.celluon.de.) CDs: - CL800BT Manual - Palm Driver Installation File - Pocket PC 2003 Driver (Widcomm Bluetooth Stack) Installation File) - Pocket PC 2003 Driver (Microsoft Bluetooth Stack) Installation File) Laserkey Quick Install Guide Adapter Installation CD Case
CL800BT MANUAL 11 3. Parts and their Functions 3.1 Front Projector: projects the keyboard image. Infra Red Light Source: supplies the light source to allow the Sensor Module to recognize key strokes. Sensor Module: recognizes key strokes and transmits them to the processing device. Pattern Projector Sensor Module Infra Red Light Source
CL800BT MANUAL 12 3.2 Rear POWER UP / DOWN Æ ON / OFF Switch Communication & Power Ports Serial Port RC232C Cable Power Port 1A @ 5V adaptor Only use the cable / adapter supplied. Power Switch Comm. & Power Ports
CL800BT MANUAL 13 3.3 Top Battery Status LED o Charging Æ Red o Fully Charged Æ Green o Battery Power Low Æ Orange o (Power off within 5 minutes.) Communication & Power Status LED o Bluetooth Mode Pairing : Blue flashing Link: Blue o Serial Mode LED Green Communication &Power Status LEDBattery Status
CL800BT MANUAL 14 * What is Bluetooth? Standard wireless communication between wireless communication devices using low power and over short distances. Note: When you want to exit from using Pocket PC and CL800BT with Bluetooth communication setting, exit by using Pocket PC own keyboard. (Due to operating error, it may reset Pocket PC). 4. How to Operate 4.1 Installation 1. Install software as described in “Manual 5”. 2. Turn power on. 3. Connect device to computer via cable. 4. Run program as described in “Manual 5” for environment setup. 5. Use laser keyboard.
CL800BT MANUAL 15 4.2 In Bluetooth Mode 1. Install software as described in “Manual 5”. 2. Turn power on. 3. Set up Bluetooth environment as described in “Manual 5”. 4. Use laser keyboard. 5. How to install, remove and use software 5.1 Pocket PC 5.1.1 System Requirements 1. Microsoft Windows 2000/XP operating system. 2. Microsoft ActiveSync 3.6 or above. 3. Pocket PC based on Microsoft Windows Mobile 2003, with Bluetooth (Widcomm or Microsoft). 5.1.2 Installation/ Upgrading/ Uninstalling the Driver For serial port drivers please refer to http://www.celluon.de.
CL800BT MANUAL 16 1. Installation 1) Connect PC to Pocket PC via ActiveSync. 2) Insert installation CD into the CD-ROM drive of your PC to start the installation program. 3) Follow installation program instructions. 2. Upgrading Download and install a new driver from http://www.celluon.de. 3. Uninstalling 1) Select Today Æ Settings Æ System Æ Remove Programs as shown in Figure 1.
CL800BT MANUAL 17 Figure 1. Uninstalling the Driver 2) Choose Projection Keyboard and click Remove, as shown in Figure 2. Follow the on-screen instructions. Figure 2. Uninstalling the Driver
CL800BT MANUAL 18 5.1.3 Connection Method To connect a Pocket PC to the Projection Keyboard follow the instructions below. 1. Turn on power to Pocket PC and Projection Keyboard. Note: Verify that sufficient battery power is supplied to the Projection Keyboard device 2. Run the program required to enter the keyboard as shown in Figure 3 (e.g. Note). Figure 3. Running the Program
CL800BT MANUAL 19 3. Select Projection Keyboard from the options, as shown in Figure 4. Figure 4. Selecting a Device
CL800BT MANUAL 20 4. When the Bluetooth Browser is open, choose CL800BT, as shown in Figure 5. Figure 5. Selecting a Bluetooth Device
CL800BT MANUAL 21 5. You are now ready to use the Projection Keyboard. To change the Projection Keyboard’s set values, click on the Projection Keyboard icon to view the control panel, as shown in Figure 6. Figure 6. Projection Keyboard Control Panel This icon
CL800BT MANUAL 22 5.1.4 Disabling the Projection Keyboard Sound When the user clicks the keyboard sound icon, a clicking sound is emitted from the Pocket PC. To turn off the sound, click the keyboard sound button once; click again to turn it back on, as shown in Figure 7. Figure 7. Keyboard Sound Icon This icon
CL800BT MANUAL 23 5.1.5 PK Settings Application Click on the settings icon to change the different setting values on the Projection Keyboard, as shown in Figure 8. Figure 8. PK Settings Icon Click the settings icon to view the Change Settings screen, as shown in Figure 9. These settings enable the user to adjust key repeat, key sound and key sensitivity. This icon
CL800BT MANUAL 24 5.1.5.1 Main Change Settings Tab Figure 9. Main Change Settings Tab Key Repeat By using Key Repeat, continuously pressing a key causes the value to be entered repeatedly. Select the Key Repeat checkbox to use the key repeat function or deselect to disable the function.
CL800BT MANUAL 25 Keyboard Sound Clicking the Keyboard Sound function causes a clicking sound to be emitted from the Pocket PC. Select the Keyboard Sound checkbox to turn on the key sound function or deselect it to disable the function. Sensitivity If the Projection Keyboard has a problem with key sensitivity, adjust the setting using the slider. For details, see “8. Adjusting Key Sensitivity”. Restoring Defaults To restore all functions to their default values, click the Restore Defaults button.
CL800BT MANUAL 26 5.1.5.2 Power Save Mode Adjust the Power Save Mode from the Power tab on the Change Settings screen. Power Save Mode On Click on the Power Save Mode On checkbox to use this function, as shown in Figure 10. Figure 10. Power Save Mode
CL800BT MANUAL 27 Standby Change the Standby setting value to alter the time elapsed before the system enters Standby mode. In Standby mode, if no keys are pressed within a given period of time the device will enter a low power mode until a key is pressed again. Figure 11. Standby Mode
CL800BT MANUAL 28 Wakeup Response To use the keyboard again, press any key or area of the keyboard. Change the Wakeup Response settings to adjust the speed for switching between Standby and normal mode, as shown in Figure 12. Figure 12. Wakeup Response
CL800BT MANUAL 29 Turning Off the Projection Keyboard Once in Standby mode, if no keys are pressed within the time specified in the Turn Off After field, the device will enter Power OFF mode, as shown in Figure 13. To use the keyboard from Power OFF mode, turn the Projection Keyboard on again. Figure 13. Power OFF Mode Time Setting Restoring Defaults To restore the settings in the Power tab to their default values, click the Restore Defaults button.
CL800BT MANUAL 30 5.1.5.3 Projection Control Adjust keyboard brightness using the settings in the Projection tab. Projector Normal Adjust the keyboard brightness using the slider for the Projector Normal setting, as shown in Figure 14 Figure 14. Projector Normal
CL800BT MANUAL 31 Projector Standby Mode Change the settings in the Projector Standby box to set the keyboard brightness in Standby mode, as shown in Figure 15. Figure 15. Projector Standby Restoring Defaults To restore the settings in the Power tab to their default values, click the Restore Defaults button.
CL800BT MANUAL 32 5.1.5.4 Driver Information Driver information for the Projection Keyboard is located under the About tab in the Settings screen, as shown in Figure 16. Figure 16. Driver Information
CL800BT MANUAL 33 5.1.6 Tutorial Click the Tutorial icon in the Projection Keyboard control panel to launch the Projection Keyboard Tutorial, as shown in Figure 17. The Tutorial offers information on how to use the Projection Keyboard. Figure 17. Projection Keyboard Tutorial This icon
CL800BT MANUAL 34 5.1.7 Shortcut Icon Keys Table 1.1 below shows the description for each icon. Table 1.1 Shortcut Icon Keys Icon Functions Switch to Today screen Run To Do program Run Mail program Run Find program Run Web Browser Run Calculator program Run Calendar program Run Address program
CL800BT MANUAL 35 5.1.8 Function Key and Ctrl Key Table 1.2 shows FN and CTRL key combinations. Key Shortcut Key Functions FN - 1 Run Note program FN - ENTER Close the current program FN - ← (Left Arrow) Home FN - → (Right Arrow) End FN - ↑(Up arrow) Page Up FN FN - ↓(Down Arrow) Page Down CTRL - Z Undo CTRL - X Cut CTRL - V Paste CTRL - C Copy CTRL - A Select All CTRL - U Underline CTRL - N Application Specific CTRL - S Application Specific CTRL - F Application Specific CTRL CTRL - Q Application Specific Table 1.2 Key Combinations
CL800BT MANUAL 36 5.2 Palm OS 5.2.1 System Requirements 1. Microsoft Windows 2000/XP operating system. 2. HotSync software. 3. Palm OS 5 or later. 5.2.2 Installation/ Upgrading/Uninstalling For the serial port driver, please refer to http://www.celluon.de or http://www.plawa.com. Installation 1. Insert CD into the CD-ROM drive of the PC to run the installation program. 2. Follow the on-screen instructions to install the program. Upgrading Find out above new drivers by referring to http://www.celluon.de and downloading drivers for installation.
CL800BT MANUAL 37 Uninstalling 1. Select App Æ Delete, as shown in Figure 18. Figure 18. Uninstalling the Program
CL800BT MANUAL 38 2. Select PK Settings and click Delete… , as shown in Figure 19. Delete the PK Tutorial using the same method. . Figure 19. Deleting PK Settings
CL800BT MANUAL 39 . 5.2.3 Establishing a Connection with the Projection Keyboard To establish a connection between a Palm device and the Projection Keyboard, please follow the instructions below. 1. Turn on the Palm device and the Projection Keyboard. Note: Check that sufficient battery power is supplied to the Projection Keyboard device. 2. Click the PK Settings icon to run the program, as shown in Figure 20. Figure 20. PK Settings Program
CL800BT MANUAL 40 3. On the Palm Bluetooth device screen, select Current Discovery in the Show items, as shown in Figure 21. Figure 21. Showing Bluetooth Devices
CL800BT MANUAL 41 4. Select CL800BT, as shown in Figure 22. Figure 22. Selecting CL800BT
CL800BT MANUAL 42 5. Click the OK button. The system will display a Connecting screen, as shown in Figure 23. Figure 23. Connecting to Bluetooth
CL800BT MANUAL 43 6. Once the Palm device and Projection Keyboard are connected, a tutorial screen is displayed, as shown in Figure 24. Figure 24. Tutorial
CL800BT MANUAL 44 5.2.4 PK Settings Once the Palm device and Projection Keyboard are connected, run the PK Settings program again to change the Projection Keyboard settings. 5.2.4.1 Main Screen Select the Main screen to view Settings, as shown in Figure 25. You may set the following functions: Figure 25. Main Screen
CL800BT MANUAL 45 Key Repeat By using Key Repeat, continuously pressing a key causes the value to be entered repeatedly. Select the Key Repeat checkbox to use the key repeat function or deselect to disable the function. Keyboard Sound Clicking the Keyboard Sound function causes a clicking sound to be emitted from the Pocket PC. Select the Keyboard Sound checkbox to turn on the key sound function or deselect it to disable the function. Sensitivity If the Projection Keyboard has a problem with key sensitivity, adjust the setting using the slider. For details, see “8. Adjusting Key Sensitivity”. Restoring Defaults To restore all functions to their default values, click the Restore Defaults button.
CL800BT MANUAL 46 Disconnecting To disconnect the Palm device from the Projection Keyboard, click on the Exit button. 5.2.4.2 Power Save Screen In the Power Save menu, you can change settings related to power consumption, as shown in Figure 26. Figure 26. Power Save Mode
CL800BT MANUAL 47 Power Save Mode Select the Power Save Mode Off checkbox to disable Power Save Mode, or deselect the checkbox to run Power Save Mode. Standby Mode Change the Standby setting value to alter the time elapsed before the system enters Standby mode. In Standby mode, if no keys are pressed within a given period of time the device will enter a low power mode until a key is pressed again. Wakeup Mode To use the keyboard again, press any key or area of the keyboard. Change the Wakeup Response settings to adjust the speed for switching between Standby and normal mode. Power OFF Mode Once in Standby mode, if no keys are pressed within the time specified in the Turn Off After field, the device will enter Power OFF mode, as shown in Figure 13. To use the keyboard from Power OFF mode, turn the Projection Keyboard on again.
CL800BT MANUAL 48 Restoring Defaults To restore the settings in the Power tab to their default values, click the Restore Defaults button. 5.2.4.3 Projector Screen Adjust the brightness of the keyboard on the Projector menu, as shown in Figure 27. Figure 27. Projector Screen
CL800BT MANUAL 49 Power Save Mode Shows whether the Power Save option is turned on or off. Keyboard Brightness Change the Projector Normal slider to adjust the keyboard brightness. Keyboard Brightness in Standby Mode Change the Projector Standby slider to adjust the keyboard brightness when in Standby mode. Restoring Defaults To restore the settings to their default values, click the Restore Defaults button.
CL800BT MANUAL 50 5.2.5 PK Tutorial Click the PK Tutorial icon to launch the tutorial. You can view information on how to use the Projection Keyboard within the tutorial, as shown in Figure 28.
CL800BT MANUAL 51 Figure 28. PK Tutorial
CL800BT MANUAL 52 5.2.6 Shortcut Icon Keys Table 2.1 shows the description for each icon. Table 2.1 Icon Keys Icon Functions Switch to Today screen Run To Do program Run Mail program Run Find program Run Web Browser Run Calculator program Run Calendar program Run Address program
CL800BT MANUAL 53 5.2.7 Shortcut Keys Table 2.2.lists the FN and CTRL key combinations. Key Key Combination Functions FN - 1 Run Memo Pad Program FN - 2 Run Voice Memo Program FN - F Select Font FN - K Launch PK Settings applicationFN - R Cmd + R FN - Y Cmd + Y FN - I Cmd + I FN - D Cmd + D FN - B Cmd + B FN - N Cmd + N FN - ←(left Arrow) Home FN - →(Right Arrow) End FN FN - ↑(Up Arrow) Page Up
CL800BT MANUAL 54 FN - ↓(Down Arrow) Page Down CTRL - Z Undo CTRL - X Cut CTRL - V Paste CTRL - C Copy CTRL - A Select All CTRL - U Undo CTRL - S Select All CTRL - F Find CTRL CTRL - P Paste Table 2.2 Key Combinations
CL800BT MANUAL 55 6. Keyboard Layout Key layout of Projection Keyboard is as follows.
CL800BT MANUAL 56 7. Typing Latin Letters and Additional Characters FIRST SECOND Remark A E I OUYNBC / PST D + R Á É Í Ó Ú Ý FN - ' SHIFT á é í ó ú ý Â Ê Î Ô Û FN - SHIFT - 6 SHIFT â ê î ô û Ä Ë Ï Ö Ü Ÿ FN - SHIFT - ; SHIFT ä ë ï ö ü ÿ À È Ì Ò Ù FN - ` SHIFT à è ì ò ù Ã Õ Ñ FN - SHIFT - ` SHIFT ã õ ñ Å FN - O SHIFT å Ç FN - , SHIFT ç Ø FN - / SHIFT ø Æ Œ FN - E SHIFT æ œ ¶ SymbolFN - S SHIFT µ ß©¿ §™ ˚ ± ® FN - C € ¥ ¢ £ Currency
CL800BT MANUAL 57 Key input e.g. 1) to input "Á" character: Press FN key and ' key simultaneously. Release both keys. Press SHIFT and A simultaneously. Key input e.g. 2) to input " ñ " character: Press the FN key, SHIFT key and ` key simultaneously. Release keys. Press N. Key input e.g. 3) to input "€" character: Press FN key and C key simultaneously. Release both keys. Press E.
CL800BT MANUAL 58 8. Adjusting Key Sensitivity The Projection Keyboard determines key input based on the amount of light reflected from the finger. Since the perceived amount of light changes depending on the surrounding environment, key sensitivity should be set according to user-specific conditions. How to Adjust Key Sensitivity 1. Click Sensitivity on the settings screen. 2. Adjust the Sensitivity slider. Check if a key stroke is recognized by pressing the center of the space bar key. Key Sensitivity Setting Factors Skin color Thickness of fingers Typing habit (leaning on keys) Finger accessories (manicure etc.) Surrounding environment
CL800BT MANUAL 59 Caution - Key sensitivity must be adjusted each time a new user accesses the keyboard according to the new user’s requirements. - To ensure correct operation, avoid extreme light sources. - Relevant environmental factors include: - Direct sunlight, artificial light, Infra Red Data Association (IrDA), remote control devices.
CL800BT MANUAL 60 9. Safety Precautions Never look directly at the light source. Avoid direct sunlight or high levels of infrared rays. Do not use in extreme brightness. Do not use under very bright incandescent light. Do not insert conductive material into the device, or damage the power or communication ports. Do not strike or knock the device as this may cause damage or operational failure. Do not disassemble the device. (After Sales Service will not be available) Only use the cable/charging adapter supplied. High pressure or heat may cause the lithium battery to explode. Remove all objects on the surface between the device and the keyboard. Use on a flat surface. Avoid glass or transparent surfaces. Fingers should not be positioned less than 5 mm from the surface. Do not operate or store in high temperature or humidity. Do not submerge in water. It is not possible to get After Service for battery failure
CL800BT MANUAL 61 caused by water. (Determined by color on the attached sticker.)
CL800BT MANUAL 62 10. Troubleshooting The device will not turn on. Cause: Discharged battery. Solution: Charge the battery fully. Key strokes not recognized even though the keyboard is connected. Cause: Sensitivity set too low. Solution: Reset to higher sensitivity and restart the device. Keyboard image is not visible even though the keyboard operates. Cause: 1. When brightness is set low, standby or off 2. The device is not charged. Solution: 1. Set brightness high, normal or on 2. Charge the device. Cause: The device is overheated. Solution: Move it to cooler surroundings and wait for a short time before restarting. Cause: The device was not positioned on a flat surface.
CL800BT MANUAL 63 Solution: Move to a flat surface. Incorrect keys are recognized when typing. Cause: Sensitivity is set too high. Solution: Reset to lower sensitivity and restart the device. Cause: The device was not positioned on a flat surface. Solution: Move to a flat surface.
CL800BT MANUAL 64 11. Specifications and Dimensions Keyboard Project Items Specifications Light source Red Laser diode Keyboard layout 17mm QWERTY layout Keyboard size Approx. 241mm*106mm Keyboard position Approx. 100mm from keyboard device Projection surface Non-reflective, opaque flat surface Visibility Visible in 1000-5000 lux ambient light Keyboard Sensor Items Specifications Illumination Visible in incandescent light of 1800 lux or more Detection rate Up to 400 characters per minute Effective key stroke Approx. 2mm Operating surface Any flat surface
CL800BT MANUAL 65 Electrical Condition Items Specifications Power source Integral lithium battery Battery capacity 830mAH(Max)@3.7V Adapter Rating 1A @ 5V Interface RS232C serial Bluetooth v1.1 class 2 Power consumption Max. 3W@5V Environmental Condition Items Specifications Operating temperature Approx. 0~35°C Storage temperature Approx. -20~50°C
CL800BT MANUAL 66 Compatible Operating Systems Microsoft Windows Mobile 2003 Palm OS 5.x Microsoft Windows XP Size (mm): 93 * 39 * 37.5 Weight: 109g For information on device and driver compatibility, please refer to http://www.celluon.de or http://www.plawa.com. Technical Support: plawa-feinwerktechnik GmbH & Co. KG Bleichereistr. 18 73066 Uhingen Germany support@plawa.com Tel.: +49 7161 – 93 87 220

Navigation menu