사용자 매뉴얼d
SG-2000
User’s manual
사용자 매뉴얼d
Contents
隌붫»ǿ
隌붫»ǿ
2.
1.
1.1.
Standby screen.
1.2.
Certification Success / Failure screen.
administrator Card Registration
2.1.
3.
Screen description.
administrator Card Registration.
User Management.
3.1.
User Registration
3.2.
Delete user
User Manual
SG-2000
1 Standby screen
1. 1 Standby screen
Time / Date
Administrator menu
Connection Status
Attendance
Standby screen
User Manual
1 Standby screen
- is a standby screen. shows the information of the time and date,
the state of waiting for authentication.
Authentication methods (fingerprint, RFID, W-KEY) authentication when you attempt to
do one of the screen lights up.
[Table 1] Function description
Name
Date / Time
Administrator menu
Connection Status
Attendance
description
displays the time and date.
Move to the Administrator menu.
Shows the connection to the server
Apply for Attendance.
User Manual
1 Standby screen
1. 2 Successful / failed authentication screen
Successful authentication screen
Authentication failed screen
User Manual
2 Administrators card registration
2. 1 Administrators card registration
-Administrator card is used when a user registered in the SG-2000 series.
- Registration procedure [Table 2]
[Table 2] Administrators card registration procedure
순 번
설
명
Check. After the terminal installed the green LED emits light when the user
information is not present.
If this check, the tagging device in the RFID card is included in the set.
If the blue LED flashes a success.
- The administrator card is used for the purpose of registration.
- Administrator card can apply for only one card when the stand alone.
- When the network mode, look at the S/W manual.
User Manual
3. User administration
3. 1 User Registration
- Registration procedure [Table 3-1] [Table 3-2]
Each of the registration process
‣ If the ID is registered successfully, the LED is blinking momentarily changed to blue and back to green.
‣ When lead to problems with registration ID is shown in red, it LED blinking returns to green.
[표 3-1] 사용자 등록 순서
순
설
번
명
When tagging an administrator card, an RFID key card user
registration status immediately.
Register your ID
Register your password.
First fingerprint registration
User Manual
3. 사용자 관리
[표 3-2] 사용자 등록 순서
Second fingerprint registration
Third fingerprint registration
RFID key card registration
W-Key registration
Confirmation page
※ Modify User, Delete and other terminal set is only available in network mode.
User Manual
3. User administration
3. 2 Delete user
순
설
번
명
When tagging an administrator card, an RFID key card user
registration status immediately.
When tagging an administrator card once more in the state
1 is the clear mode.
Delete All Click Delete All button
Confirmation page
Each of the registration process
‣ If the ID is registered successfully, the LED is blinking momentarily changed to blue and back to green.
‣ When lead to problems with registration ID is shown in red, it LED blinking returns to green.
Federal Communications Commission (FCC) Statement
15.21 You are cautioned that changes or modifications not expressly approved by the part responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference that may cause undesired
operation of the device.
15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.6
Linearized : No
XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer : Acrobat Distiller 7.0.5 (Windows)
Creator Tool : PScript5.dll Version 5.2.2
Modify Date : 2016:04:22 09:35:07+09:00
Create Date : 2016:04:22 09:33:15+09:00
Metadata Date : 2016:04:22 09:35:07+09:00
Format : application/pdf
Title : SG_2000_User_Manual(Eng).hwp
Creator : kes
Document ID : uuid:57308cb7-fc72-425d-b226-363308216b7f
Instance ID : uuid:e4496ab1-ea2b-4def-89d9-406d9b90bf47
Page Count : 10
Author : kes
