CHINA DRAGON TECHNOLOGY CDT-XX5370 WIFI Wireless Module User Manual
CHINA DRAGON TECHNOLOGY LIMITED WIFI Wireless Module
user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1889838 |
| Application ID | EAUKOjjXjuhUvEAePOg7vw== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 226.85kB (2835615 bits) |
| Date Submitted | 2013-01-30 00:00:00 |
| Date Available | 2013-01-30 00:00:00 |
| Creation Date | 2013-01-16 15:45:45 |
| Producing Software | Adobe Acrobat 8.0 |
| Document Lastmod | 2013-01-28 11:02:48 |
| Document Title | user manual |
| Document Creator | Microsoft® Office Word 2007 |
CHINA DRAGON TECHNOLOGY LIMITED User Manual The information contained herein is the exclusive property of CDT and shall not be distributed, reproduced or disclosed in whole or no in part without prior written permission of CDT Version：V1.0 Date：2012.4.28 Productÿ CDT-XX5370-00~09 DESIGN： CHECK： APPROVAL： CHINA DRAGON TECHNOLOGY LIMITED DOCUMENT No : REG.DATE :2012.4.28 SPECIFICATION REV.DATE :2012.4.28 REV.NO : 1.5 PAGE : 2/15 Change History of Revision Reversion Date Contents of Revision Change 1.0 2011.4.28 First release Remark S.heng CHINA DRAGON TECHNOLOGY LIMITED DOCUMENT No : REG.DATE :2012.4.28 SPECIFICATION REV.DATE :2012.4.28 REV.NO : 1.5 PAGE : 3/15 Table of Contents No Description Page Introduction -----------------------------------------------------4 2. Namingrule-----------------------------------------------------4 3. Features---------------------------------------------------------5 4. Ordering Information------------------------------------------5 5. Label marking--------------------------------------------------5 6. Block Diagram-------------------------------------------------6 7. Absolute Maximum Ratings--------------------------------6 8. Operating Conditions-----------------------------------------7 9. Standard Test Conditions------------------------------------7 10. Electrical Specifications--------------------------------------8 11. Environment Tests-------------------------------------------13 12. Pin Description-----------------------------------------------14 14. Mechanical Drawing & Mechanical size---------------15 CHINA DRAGON TECHNOLOGY LIMITED DOCUMENT No : REG.DATE :2012.4.28 REV.NO : 1.5 SPECIFICATION REV.DATE :2012.4.28 PAGE : 4/15 1.Introduction CDT-XX5370-00~09 is a new generation of embedded CDT-Wifi products module. CDT-Wifi is based on CDT interface, accord with Wifi wireless network standard embedded module, the built-in wireless network protocol IEEE802.11 protocol stack, and TCP/IP protocol stack, save electricity intelligent control procedures Can realize, the user serial data to the wireless network conversion between. Through the CDT-Wifi module, the traditional serial equipment also can easily access wireless network. CDT-XX5370-00~09 is in the first two generations of products based on top, and carries on the comprehensive hardware and software upgrades, function more powerful, use more simple, lower power consumption In the original foundation above the intelligent current control program upgrade, than the former two generationproduct province electricity above 40%. In temperature compensation, the application of the latest software automatic control technology, automatic temperature adjustment, and will not affect the data transmission, it solves the traditional product, because the temperature too high, cause data loss, frequent fall nets, etc 2.Namingrules: CDT 5370B 0:USB 1:MINIPCIE A. .. 8188E: 8188T: 5370B: Realtek8188CE Realtek8188CTV Ralink5370B 2:SDIO 5572: Ralink5572 8188E: Realtek8188CE 5931: MTK5931 CHINA DRAGON TECHNOLOGY LIMITED DOCUMENT No : SPECIFICATION REG.DATE :2012.4.28 REV.NO : 1.5 REV.DATE :2012.4.28 PAGE :5/15 3. Features CDT-XX5370-00~09 is the small size and low power module for IEEE 802.11b/g/n wireless LAN. CDT-XX5370-00~09 is based on Ralink 5370B solution. IEEE 802.11 B/G/N Dual Band WLAN infrastructure Size : 25mm x 12mm x 0.6mm USB 2.0 Supports drivers for Windows Vista, 2000, XP, Linux Security : WPA,WPA2,AES(TKIP) • Application: DTV, DVR, HD DVD Player, Blue-ray Disk Player, STB 4. Ordering Information Model Description CDT-D05370B-00 Wi-Fi Module, 1T1R 5. Label marking ① CDT-D05370B-00 1111A0201 ② ③ ④ 004TB5B00331 ① Model No ④ Product Lot No. : 1110A0401 ② MAC Address BAR Code -11 : Year - 02 : Date ③ MAC Address No. - 11: Month - 01 : Manufactured - Revision No. : A Process CHINA DRAGON TECHNOLOGY LIMITED DOCUMENT No : REG.DATE :2012.4.28 SPECIFICATION REV.DATE :2012.4.28 REV.NO : 1.5 PAGE : 6/15 6. Block Diagram 7. Absolute Maximum Ratings Caution : The specifications in Table 1 define levels at which permanent damage to the device can occur. Function operation is not guaranteed under these conditions. Operating at absolute maximum conditions for extend periods can adversely affect the long-term reliability of the device. Parameter Min Storage Temperature -10 Storage Humidity (40℃) Max Unit +80℃ ℃ 90% < Table 1 Absolute Maximum Ratings > . Other conditions 1) Do not use or store modules in the corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are contained. Also, avoid exposure to moisture. 2) Store the modules where the temperature and relative humidity do not exceed 5 to 40℃ and 20 to 60%. 3) Assemble the modules within 6 months. Check the soldering ability in case of 6 months over. CHINA DRAGON TECHNOLOGY LIMITED DOCUMENT No : REG.DATE :2012.4.28 SPECIFICATION REV.DATE :2012.4.28 REV.NO : 1.5 PAGE : 7/15 8. Operating Conditions Parameter Min Typ Max Unit Operating Temperature +60 ℃ 85 2.7 3.3 4.0 Vdc Operating Humidity Supply Voltage2 VDD_3.3V 9. Standard Test Conditions The Test for electrical specification shall be performed under the following condition unless otherwise specified. 1). Ambient condition Temperature :25℃ ± 5℃ . Humidity:65% ± 5% R.H. 2). Power supply voltages 3.3V (±5%) input power at the Module 3). Current consumption over recommended range of supply voltage and operating conditions is like below. When it’s tested, it must be supplied more than 2 times of maximal current. CHINA DRAGON TECHNOLOGY LIMITED DOCUMENT No : REG.DATE :2012.4.28 REV.NO : 1.5 SPECIFICATION REV.DATE :2012.4.28 PAGE : 8/15 10. Electrical Specifications 1) DC Characteristics Current Consumption Min. Typ. Max. TX Mode ( MCS7) 105 Idle and Associated state 50 Radio disabled state 10 Unit mA 2) RF Characteristics for IEEE802.11b ( 11Mbps mode unless otherwise specified) Items Contents Specification IEEE802.11b Mode DSSS/CCK Channel frequency 2400 ~ 2483 MHz Data rate 1,2,5.5,11Mbps TX Characteristics Min. Typ. Max. Unit Power Level Spectrum Mask 12.5 13 14 dBm 1st side lobes ( to fc ±11MHz) -43 -30 dBr 2nd side lobes ( to fc ±22MHz) -58 -50 dBr Modulation Accuracy (EVM) 30 30 Power On/Off ramp 0.5 2.0 Usec Freq. Tolerance -15 15 ppm Chip Clock Freq. Tolerance -15 15 ppm RX Characteristics Min. Typ. Max. Unit -88 -76 dBm -10 dBm Minimum Input Level Sens (FER ≤ 8%) Maximum Input Level (FER ≤ 8%) * Normal Condition : 25℃, VDD=3.3/5V. CHINA DRAGON TECHNOLOGY LIMITED DOCUMENT No : REG.DATE :2012.4.28 REV.NO : 1.5 SPECIFICATION REV.DATE :2012.4.28 PAGE : 9/15 3) RF Characteristics for IEEE802.11g ( 54Mbps mode unless otherwise specified) Items Contents Specification IEEB802.11g Mode OFDM Channel frequency 2400 ~ 2483 MHz Data rate 6,9,12,18,24,36,48,54Mbps TX Characteristics Min. Typ. Max. Unit Power Level 12.5 14 15 dBm at fc ±11MHz -32 -20 dBr at fc ±20MHz -43 -28 dBr at fc ≥ ± 30MHz -48 -40 dBr Constellation Error (EVM) -34 -25 dB Freq. Tolerance -15 15 ppm Chip Clock Freq. Tolerance -15 15 ppm RX Characteristics Min. Typ. Max. Unit -75 ppm -20 ppm Spectrum Mask Minimum Input Level Sens. (PER ≤ 10%) Maximum Input Level (PER ≤ 10%) *Normal Condition : 25℃, VDD=3.3/5V CHINA DRAGON TECHNOLOGY LIMITED DOCUMENT No : REG.DATE :2012.4.28 REV.NO : 1.5 SPECIFICATION REV.DATE :2012.4.28 PAGE : 12/15 6) RF Characteristics for IEEE802.11gn ( MCS7 mode unless otherwise specified) Items Contents Specification IEEE802.11n - 2.4GHz Mode OFDM Channel frequency 2400 ~ 2483 MHz Data rate 6513195263952585,65Mbps.,,.,, TX Characteristics Min. Typ. Max. Unit Power Level 12.5 14 15 dBm at fc ±11MHz -32 -20 dBr at fc ±20MHz -35 -28 dBr at fc ≥ ± 30MHz -45 -40 dBr Constellation Error (EVM) -32 -28 dB Freq. Tolerance -15 15 ppm Chip Clock Freq. Tolerance -15 15 ppm RX Characteristics Min. Typ. Max. Unit -71 -64 ppm -70 -62 ppm Spectrum Mask Minimum Input Level Sens.(HT20,PER ≤ 10%) Minimum Input Level Sens.(HT40,PER ≤ 10%) Maximum Input Level (PER ≤ 10%) -20 ppm CHINA DRAGON TECHNOLOGY LIMITED DOCUMENT No : REG.DATE :2012.4.28 SPECIFICATION REV.DATE :2012.4.28 REV.NO : 1.5 PAGE : 13/15 11. Environment Tests Item Test Conditions Heat Load Initial values are measured at standard test condition. Leave samples in 60℃±2℃ for 96 ±5 hours, and in standard test condition for 30 minutes, then take measurements within 1 hour. - Supply voltage : standard ± 5% - Supply voltage cycle : 1.5h on, 0.5h off Humidity Load Test Initial values are measured at standard test condition. Leave samples in 40℃±5℃, 90 ~ 95% RH for 96 ±5 hours, and in standard test condition for 30 minutes, then take measurements within 1 hour. - Supply voltage : standard + 5% - Supply voltage cycle : 1.5h on, 0.5h off Cold Test Temperature Specifications Initial values are measured at standard test condition. Leave samples in －10℃ ±2℃ for 96 ±5 hours, and in standard ambient for 1 hour with standard power Supply then take measurements within 1 hour. Take measurements in standard condition. Temp. : -10℃ ~ +80℃ Duration : 30 min Ramp-up & Ramp-down for 5 min Cycle : 100cycle test •TX Power : ±4dB Max Min Input Level : ±4dB Max CHINA DRAGON TECHNOLOGY LIMITED DOCUMENT No : REG.DATE :2012.4.28 SPECIFICATION REV.DATE :2012.4.28 REV.NO : 1.5 PAGE : 14/15 12. Pin Description Terminal No Terminal name Terminal Voltage LED_OUT WIFI_LED GND USB_D+ USB USB_D- USB 3.3 3.3v GND WIFI_ANT GND 1 LED_OUT: WIFI_LED 2 GND: Ground 3 USB_D+: USB Data + as defined by USB 2.0 4.USB_D-: USB Data - as defined by USB 2.0 5 3.3V: 3.3V DC 6 GND: Ground 7 WIFI_ANT: WIFI_RF_OUT 8 GND: RF_Ground WIFI_RF_OUT CHINA DRAGON TECHNOLOGY LIMITED DOCUMENT No : REG.DATE :2012.4.28 SPECIFICATION REV.DATE :2012.4.28 REV.NO : 1.5 PAGE 14.Mechanical Drawing & Mechanical size Thickness: : 15/15 Usage Guidelines for FCC Compliance Antenna Selection In order to maintain compliance with FCC regulations, an antenna with no more than 2dBi gain must be used. This module has been tested with the following antennas: nix Part Number Antenna Type Antenna Gain DTS Part Number Antenna Type Antenna Gain ANT-2400-01A External antenna 2.0 dBi Mode LP Mode The module when used in DTS mode, may be used with the above antennas and maintain the requirements of the FCC grant. Module Modification The module must not be physically altered in any way. If any connections are made to the module that bypass the module pins, socket, or antenna connector, the FCC modular certification cannot be inherited. End Product Labeling Requirements Pursuant to FCC public notice DA 00-1407, the end product must be labeled on its exterior with the following verbiage: “Contains FCC ID: ROWCDT-XX5370” Additional FCC Testing Requirements While the module’s FCC certification can be inherited (presuming the guidelines are met), additional testing will be required to achieve full FCC compliance for your end-product. The integrator is required to perform unintentional radiator testing on the final product per FCC sections 15.107 and 15.109. Additional, product-specific testing might be required. Please contact the FCC regarding regulatory requirements for your application. RF exposure compliance The Module should be install above separation distance 20 cm from human. It should add SAR testing when it not satisfy. FCC Statements of Compliance Statement and Conditions of Modular Compliance FCC NOTICE (FCC ID: ROWCDT-XX5370) This device complies with the rules set forth in Part 15 by the Federal Communications Commission. Operation is subject to the following two conditions: 1) This device may not cause harmful interference 2) This device must accept any interference received, including interference that may cause undesired operation. The B0-9(5370) module is provided with an Single FCC Modular Certification. This certification may be install in an end-user product, negating the need for FCC part 15 intentional radiator testing on this module, provided that the following are met: 1. The module must not be modified in any way. Coupling of external circuitry must not bypass the provided connectors. 2. End product must be externally labeled with “Contains FCC ID: ROWCDT-XX5370” 3. The end product’s user’s manual must contain an FCC statement equivalent to that listed in Customer FCC Warning Requirements of this manual. 6. The integrator must not provide any information to the end-user on how to install or remove the module from the end-product. The integrator is required to perform unintentional radiator testing on the final product per FCC sections 15.107 and 15.109. Customer FCC Warning Requirements The end-product user’s manual must contain the following or equivalent verbiage. FCC NOTICE (Containing FCC ID: ROWCDT-XX5370) The RF module (FCC ID: ROWCDT-XX5370) contained within this device complies with the rules set forth in Part 15 by the Federal Communications Commission. Operation is subject to the following conditions: 1. This device may not cause harmful interference 2. This device must accept any interference received, including interference that may cause undesired operation. 4. The module must not be modified in any way. Coupling of external circuitry must not bypass the provided connectors. Any changes or modifications could void the user’s authority to operate the equipment. Notices of Limitation Product Testing The integrator must still show that their product complies with FCC regulations applicable to their product. The integrator is not required to perform transmitter testing on the ROWCDT-XX5370 DTS module, provided the guidelines in this document are met.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Modify Date : 2013:01:28 11:02:48+08:00 Create Date : 2013:01:16 15:45:45+08:00 Metadata Date : 2013:01:28 11:02:48+08:00 Creator Tool : Microsoft® Office Word 2007 Format : application/pdf Document ID : uuid:1972e20e-4376-4c60-ad4f-99edfabc16bd Instance ID : uuid:13913209-9db6-4990-8533-ef67d36871d0 Producer : Adobe Acrobat 8.0 Has XFA : No Page Count : 16 Creator : Microsoft® Office Word 2007EXIF Metadata provided by EXIF.tools