CHINA ELECTRONICS B102 BLUETOOTH SPEAKER User Manual
China Electronics Shenzhen Company BLUETOOTH SPEAKER
User Manual
B102 USER MANUAL Product Specification: Main parameter: Bluetooth version: V4.1 output power:3W frequency response:150hz-18khz RMS: (THD = 10%) drive:2’ power supply:USB, DC 5V 500mA distortion:≦1% S / N:≥ 75dB Charging the Speaker: Before using the speaker for the first time, charging it for at least 0.5 hours. 1、Plug the USB cable into the port on the speaker, plug the other end into the USB port on the adapter(DC 5V). 2、Red LED will turn on to indicate that the unit is charging. 3、Red LED will turn off when fully charged. Start-up& Shutdown Functions: 1、Long press POWER to start the blue-tooth speaker. 2、Blue LED g flashes, waiting for pairing 3、Long press POWER to shutdown the blue-tooth speaker. 4、LED off if shutdown the speaker. Pairing the Device: 1、Place the speaker near the Blue-tooth-enabled device. 2、Long press POWER to start the blue-tooth speaker, blue LED flashes, the speaker is now in pairing mode.Follow the instructions of your device to search for the speaker. 2、The speaker is called “B102”, enter the PIN”0000” if need. 3、Blue LED light, the completion of the pairing, while the voice prompts. The speaker is in the state of pairing the last device default in the first 3 seconds after starting. If failing to pair, the speaker will be in state of pairing automatically. LED Indicator 1、Charging: Red LED on 2、Fully charged: Red LED off 3、Pairing Mode: Blue LED flashes. 4、Connected: Blue LED slow flashes 5、Line IN Mode: Blue LED on 6、Low battry: Red LED flashes FCC Warning Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Administrator Create Date : 2018:04:11 09:40:02+08:00 Modify Date : 2018:04:12 09:48:30+08:00 Language : zh-CN XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : Administrator Creator Tool : Microsoft? Office Word 2007 Metadata Date : 2018:04:12 09:48:30+08:00 Producer : Microsoft? Office Word 2007 Document ID : uuid:0399a138-e72c-4d64-9ecc-d5f04f88a681 Instance ID : uuid:d7d07665-2068-41fd-92ef-986bffa1fe98 Page Count : 2EXIF Metadata provided by EXIF.tools