CHOICE FORTUNE SC-60UK850N LED TV User Manual
CHOICE FORTUNE HOLDINGS LIMITED LED TV
User Manual
ULTRA-HD SC-60UK850N CONTENTS Important Safety Instructions Safety Information Preparation What's Included Front View Rear View Installing the Base Stand Removing the Stand for Wall-Mounting Remote Control Connecting External Devices Basic Operations Initial Setup Menu Operation Picture Sound Function Time Option LOCK Channel 10 10 12 13 15 16 18 19 20 21 Network Setting Internet Digital Media Palyer Introduction 23 26 30 30 Parental Control 31 Troubleshooting 33 35 Application Remote control manual 36 En -1 IMPORTANT SAFETY INSTRUCTIONS • Read these instructions – All the safety and operating instructions should be read before this product is operated. • Keep these instructions – The safety and operating instructions should be retained for future reference. • Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. • Follow all instructions – All operating and use instructions should be followed. • Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. • Do not install near any heat sources such as radiators, heat registers, stoves, or other that produce apparatus (including heat. • Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not into your outlet, consult an electrician for replacement of the obsolete outlet. • Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Only use attachments/accessories by the manufacturer. • Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. • Unplug this apparatus during lightning storms or when unused for long periods of time. En -2 • Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. • Please keep the unit in a well-ventilated environment. or electric shock, WARNING: To reduce the risk of do not expose this apparatus to rain or moisture. The apparatus should not be exposed to dripping or splashing. Objects filled with liquids, such as vases should not be placed on apparatus. WARNING: The batteries shall not be exposed to excessive heat such as sunshine, or the like. WARNING: The mains plug is used as disconnect device, the disconnect device shall remain readily operable. WARNING: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable personnel. parts inside. Refer servicing to This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. SAFETY INFORMATION To ensure reliable and safe operation of this equipment, please carefully read all the instructions in this user guide, especially the safety information below. Electrical Safety • The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product. • To prevent overload, do not share the same power supply socket with too many other electronic components. • Do not place any connecting wires where they may be stepped on or tripped over. • Do not place heavy items on any connecting wire, which may damage the wire. • Hold the main plug, not the wires, when removing from a socket. • During a thunderstorm or when not in using the television for long periods, turn off the power switch on the back of the television. • Do not allow water or moisture to enter the TV or power adapter. Do NOT use in wet, moist areas, such as bathrooms, steamy kitchens or near swimming pools. • Pull the plug out immediately, and seek professional help if the main plug or cable is damaged, liquid is spilled onto the set, if the TV set accidentally exposed to water or moisture, if anything accidentally penetrates the ventilation slots or if the TV set does not work normally. • Do not remove the safety covers. There are no user serviceable parts inside. Trying to service the unit this apparatus. • To avoid a battery leakage, remove batteries from the remote control, when the remote is not use for long period, or when the batteries are exhausted. • • For best results, use type AAA (example-alkaline, carbon-zinc, etc.) batteries. • Install only new batteries of the same type in your product. • Failure to insert batteries in the correct polarity, as indicated in the battery compartment, may shorten the life of the batteries or cause batteries to leak. • Do not mix old and new batteries. • Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium) or (Nickel Metal Hydride) batteries. • Batteries should be recycled or disposed of as per state and local guidelines. • Do not attempt to recharge disposable batteries. • Do not short circuit battery terminals. • Keep away from children. Physical Safety • Do not block ventilation slots in the back cover. You may place the TV in a cabinet, but ensure at least 5cm (2’’) clearance all around. • Do not tap or shake the TV screen, or you may damage the internal circuits. Take good care of the remote control. • • Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including • Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong, the consult an electrician for replacement of the obsolete outlet. • Protect the power cord from being walked on or pinched particularly at plugs. • Unplug the apparatus during lightning storms or when unused for long periods. s required if the apparatus does not operate • normally or if the apparatus, including the power supply cord or pulg, has been damaged in any way. • Servicing is also required if liquid has been spilled, or objects have fallen into the apparatus; when the apparatus has been exposed to rain or moisture; or if the apparatus has been dropped. • Always connect your television to a power outlet with protective ground connection. • ation. • The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. d on the apparatus. • • The use of apparatus in moderate climates. En -3 PREPARATION What's Included Input Menu Q.MENU ENTER Back Exit VOL CH Mute MTS/ Audio CC En -4 TTS P.Mode Sleep List S.Mode INFO TV Set Remote Control with Batteries(2*AAA) TV Stand Four Screws(M4x14mm) User Manual Quick Start Guide User Manual Quick Start Guide PREPARATION Front View SOURCE MENU CH+ CHVOL+ VOL- 1. SOURCE Press to select among different input signal sources. 2. MENU Display the OSD (on screen display) menu. 3. CH+/Press to select a channel. 4. VOL+/Press to adjust the volume. 5. POWER Switch the TV between On / Standby mode. 6. IR (Infrared Receiver) Receive IR signals from the remote control. 7. POWER Indicator Illuminate red when the TV is in standby mode. En -5 PREPARATION Rear View 1. Power Cord Connect to AC power outlet. 2. Headphone Output Socket Connect to the Headphones. 3. OPTICAL Output Connect a digital sound system to this jack. 4. LAN Network connection port. 5. HDMI Inputs Connect to a input device. (HD) signal Note:HDMI1 with ARC function.This item is used to turn on/off Audio Return Channel. When ARC is on,the TV can return the audio to connected HDMI device.(Amplifier,etc) En -6 6. DTV/TV Input Connect to the antenna (75Ω VHF/UHF) socket with the RF coaxial cable. 7. USB Port also play photo files Update and video files. 8. COMPOSITE/COMPONENT IN Connect to AV devices with composite/ component (Y/Pb/Pr) video input sockets. COMPOSITE VIDEO and COMPONENT(Y/PB/PR) share with AUDIO IN (L/R). 9. AUDIO Input Connect to the AUDIO(L/R) output sockets on external audio device. PREPARATION Installing the Base Stand • 1. Lay the TV face-down on a flat, cushioned surface to avoid damaging or scratching. • 2.Fix the left base stand to the TV using the 2 pcs provided screws(M4x14mm) • 3.Fix the right base stand assembly to the TV using the 2 pcs provided screws(M4x14mm) Removing the Stand for Wall-Mounting • 1.Lay the TV face-down on a flat, cushioned surface to avoid damaging or scratching. • 2.Untighten the 4 pcs screws holding the stand assembly and remove them. • 3.Attach the wall-mount bracket to the TV using the mounting holes on the back of the TV. Mount this TV according to the instructions included in the wall-mount bracket. WARNING: This apparatus is intended to be supported by UL Listed wall mount bracket. En -7 PREPARATION Remote Control Input Menu Q.MENU 11 12 ENTER 13 Back 10 Exit 14 17 15 VOL CH Mute 18 19 20 CC 23 24 26 16 MTS/ Audio 21 TTS P.Mode Sleep 22 25 List S.Mode INFO 28 27 En -8 1. POWER: Turn the TV on and off. 2. Input: This button is used to switch among different sources, Select a source and press ENTER button to confirm. 3. Digital Buttons(0-9, -) : Directly select channel with digital buttons. 4. : Switch to the previous program. 5. YouTube: If network connects, press this key to view YouTube directly. 6. pandora : Press this button to select pandora application. 7. VUDU: Press this button to select VUDU application. 8. NETFLIX: If network connects, press this key to view NETFLIX directly. 9. Q.MENU: Press this key to go to quick menu. 10. Menu: Display the main menu or exit the current menu. 11. ENTER : Validation key. 12. Arrow buttons : Use to select on-screen menu items and change menu values. 13. Back: Return. 14. Exit : Exit the menu. 15. VOL +/- : Press these buttons to adjust the volume. 16. CH / : Press these buttons to change channel upward or downward. 17. HOME: Press it to go to App home page. 18. MUTE: Press this button to cut off the sound of the TV set temporarily, press again to resume. 19. Digital Media Player control button: Include play/pause, stop, backward, forward is used in USB mode . Please refer to relevnat instructions in the section of multimed player. 20. CC: Press this button to adjust CC mode . 21. MTS/Audio: In USB mode, press this button to switch audio track when movie is playing. In TV mode, press this button to switch MTS or Audio Language. 22. Color buttons: It's used as or Program Edit menu. 23. TTS: Pree this but ton to adjust TTS o n or off . 24. P.Mode:Press this button for picture settings(Vivid,Standard,Movie,Eco Save,User). 25. Sleep:Press this button to set the sleep timer. 26. List : Press it to show channel list and favorite list on screen. 27. S.Mode:Press this button for sound settings (Standard,Music,Movie,Sports,User). 28. INFO: Display the program information . CONNECTING EXTERNAL DEVICES AV Cable (not included) YPBPR Cable (not included) Blu-ray Player / Recorder Game Console Video Camera VCR Satellite Satellite Receiver MINI AUDIO Cable (included) HDMI Device MINI YPBPR Cable (included) HDMI Cable (not included) Optical Cabl (not included) RF Cable (not included) OR Audio Cable (not included) Headphone Digital Audio System En -9 Basic Operations Initial Setup • Connect the power cord to the power socket after you have completed all the physical connections. At this stage, the TV will enter Standby Mode and the red LED indicator will illuminate. button on the main unit or on the remote control to • In Standby Mode, press the turn the TV on. The red LED indicator will turn off. • The first time you turn the TV on, it will go into the Setup Wizard. Press buttons to select your desired mode and press ENTER OSD language Config Menu language. Country Select the country. US English ENTER Español Mexico Francias Canada Confirm [ ] ACCEPT AUTOMATIC UPDATES En - 10 ENTER Confirm [ ] DECLINE ALL BACK Retum Initial Setup Time Zone Home or Store Select the time zone. Select where you will use the TV. Pacific Home Atlantic Store Eastern ENTER Confirm ENTER Retum DST Clock Select Daylight saving time. Select to set the clock. ENTER BACK Confirm Auto Off Manual On BACK Confirm Retum ENTER Confirm BACK Retum Connection Devices Select to connect the device. Connect to the internet Select the channel input Scan Channels ENTER Confirm BACK Retum Home Mode : The picture mode will be Standard if you select this mode. Retail Mode : Select Dynamic Mode if you would like your picture to be brighter. At times this mode may use more energy to operate the Volume/Sound Mode and Picture Mode. • The SLEEP-MODE Power should be less than 0.5 W. En - 11 Basic Operations Menu Operation 1 Input Setup Input Source Source Input Press INPUT key on the remote control to enter "INPUT SOURCE" menu. There are these options for you to select: "TV", "AV", "Component", "HDMI1", “HDMI2", “HDMI3",“USB". Use /key to select a input source and press ENTER key to confirm. Input Source TV AV Component HDMI 1 HDMI 2 HDMI 3 USB 2 Channels Selection There are four ways to select channel: 1) Using number keys, and ENTER keys on the remote control to select channel directly. To select channel 90, press 9 When you use the number buttons, you can directly select channels that were either erased or not memorized. ENTER 2) Using CH / key on the remote control or on your TV to select channel. When you press the CH / key, the TV changes channels in sequence. You will see all the channels that the TV has memorized. You will not see channels that were either erased or not memorized. 3) Press key to return to previous channel, press it again to return to current channel. To quickly switch between two channels that are far apart, tune to one channel, then use the number keys to select the second channel. Then use the between them. button to quickly alternate is not activated if no channel has been changed after TV turning on. 4) Select channels from "Channels List" or "Favorite List". Press LIST key to choose from "Channel List" menu. 3 Volume Adjustment and Mute Setup Volume adjustment Press VOL / key on the remote control or the TV to display "Volume" menu, adjust the volume of TV between 0 to 100 by using VOL / key: En - 12 Menu Operation To increase the volume, press VOL To decrease the volume, press VOL key; key; Mute Mute Press “MUTE” and the sound cuts off. The MUTE icon will appear in the lower-right corner of the screen. To resume sound, press the “MUTE” button again, or simply press the VOL key. 4 Current Channel Information Press “INFO” key on the remote control to view current channel information, the indications of channel information are listed in the following table. 14.1 ATSC-1 480i Moving picture 480i 4:3 01/ 012005 08: 40 08:30 09:30 Press “EXIT” key on the remote control to exit this OSD. Picture 1. Press MENU key to display the main menu on the screen. 2. Press / key to select "Picture" option. 3. Press key to enter "Picture" submenu. 4. You can also press the PICTURE key on the remote control to select one of the picture settings. Picture Mode Your TV has four picture settings (Vivid, Standard,Movie,Eco Save, User) that are preset at the factory. Only "User" mode can be set to your preference by adjusting particular items such as Contrast, Brightness, Color, Sharpness. 1. Press / key to select "Picture Mode" option. 2. Press “” or "ENTER" key to confirm. 3. Press / key to select one picture mode. Picture Sound Function Time Option Lock Channel En - 13 Menu system instruction Picture User settings for PICTURE (Contrast, Brightness, Color, Sharpness,Tint) Your set has several settings which allow you to control picture quality. 1. Press ▲/▼ key to select a particular item. 2. Press / key to decrease or increase the value of a particular item. Note: The adjusted values are stored according to the selected particular item. Contrast: Adjusts the lightness and darkness between objects and the background. Brightness: Adjusts the brightness of the picture. Color: Adjusts the colors, making them lighter or darker. Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull. Tint: Adjusts the Tint of the picture. Picture Mode Contrast 70 Brightness 50 Color 70 Sharpness 50 Tint Backlight Color Temperature Backlight You can Change the brightness of the entire screen according to your preference. 1. Press / key to select "Backlight" option. 2. Press/ key to increace or decreace the backlight value. Backlight: Adjusts the brightness of the whole screen. Color Temperature You can change the color of the entire screen according to your preference. 1. Press / key to select "Color Temperature" option. 2. Press “” or "ENTER" key to confirm. 3. Press / key to select one color temp. Cool: Makes whites bluish. Standard: Makes whites nature Warm: Makes whites reddish. En - 14 75 Menu system instruction Sound 1. Press MENU key to display the main menu on the screen. 2. Press / key to select "Sound" option. 3. Press key to enter "Sound" submenu. 4. You can also press the SOUND key on the remote control to select one of the sound. Sound Mode You can select the type of the special sound effect to be used when watching a given broadcast. Your TV has five sound settings (“Standard”, “Music”,“Movie”, “Sports”,“User”) that are preset at the factory. 1. Press / key to select "Sound Mode" option. 2. Press “” or "ENTER" key to confirm. 3. Press / key to select one sound mode. Sound Mode Balance AVL Surround Sound Video Description Digital Audio Output Audio Language Dolby Audio Process HDMI-ARC Standard: Selects the normal sound mode. Music: Provides clear and live sound for music. Movie: Provides live and full sound for movies. Sports: Emphasizes bass over other sounds. User: Selects your custom sound settings. Balance If the volumes of the left speaker and the right speaker are not the same, you can adjust the "Balance" to suit your personal preference. 1. Press / key to select "Balance" option. 2. Press / key to decrease or increase the value of the item. AVL Each broadcasting station has its own signal conditions, and it is inconvenient to adjust the volume every time the channel is changed. “AVL” automatically adjusts the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output whenthe modulation signal is low. 1. Press / key to select “AVL” option. 2. Press “” or "ENTER" key to confirm. 3. Press / key to select “On” or “Off”. Surround Sound This is used to turn on surround sound to gain better sound effect. 1. Press / key to select "Surround sound” option. 2. Press “” or "ENTER" key to confirm. 3. Press / key to select “Surround” or “Off”. Video Description 1. Press / key to select "Video Description” option. 2. Press “” or "ENTER" key to confirm. 3. Press / key to select “On” or “Off”. En - 15 Menu system instruction SOUND Digital Audio Output This is used to set digital audio output. 1. Press / key to select "Digital Audio Output” option. 2. Press “” or "ENTER" key to confirm. 3. Press / key to select “Auto” or “PCM”. Audio Language Dolby Audio Process Dolby Audio Process Mode Surrond Virtualizer Dialog Enhancer Off On Movie User High Off High Auto Voulme Control Off You can set the primary and secondary language for audio. Dolby Audio Process You can set Dolby Audio Process on the Dolby Audio Process submenu. HDMI-ARC Turn on or turn off the HDMI-ARC function. Function 1. Press MENU key to display the main menu on the screen. 2. Press / key to select “Function” option. 3. Press key to enter “Function” submenu. Noise Reduction Press / key to select the Noise Reduction mode. You can select the right mode to match the pictures. MPEG Noise Reduction Press / key to select the Mpeg Noise Rdeuction mode: off/low/middle/high. The picture will be better when it is in “high” mode. Aspect Ratio 1. Press / key to select “Aspect Ratio” option. 2. Press “” or "ENTER" key to confirm. 3. Press / key to change the size of the picture on the size of the picture on the screen. En - 16 Noise Reduction MPEG Noise Reduction Aspect Ratio Link Setup HDMI EDID Netflix Deactivate Netflix ESN Netflix Version VUDU Deactivate TTS Menu system instruction Function Link Setup 1. Press / key to select “Link Setup” option. 2. Press ENTER or key to enter “Link Setup” submenu. Enable Link: Press / to turn on/off the link setup. Auto Power On: When this option is “On” and the TV is in standby mode. T turn the TV at the same time. Auto Standby: When this Option is “On” and the TV is on, to turn off standby mode. Link Setup Enable link On Auto Power On On Auto Standby Off HDMI EDID This function is only used in HDMI mode. 1. Press “/" key to select “HDMI EDID" option. 2. Press “” or "ENTER" key to confirm. 3. Press / key to select “ 4K” or “ 2K”. TTS Off Netflix Deactivate Verbosity Low 1. Press “/" key to select “Netflix Deactivate" option. 2. Press “” or "ENTER" key to confirm. 3. Press "Yes" to confirm again, the Netflix will be activated. Rate Support Slow TTS Pitch Support Mid Betty Say Netflix ESN Display the Netflix Esn information. Netflix Version Display the Netflix version. VUDU Deactivate 1. Press “/" key to select “VUDU Deactivate" option. 2. Press “” or "ENTER" key to confirm. TTS You can set TTS information in the TTS menu. En - 17 Menu system instruction Time 1. Press MENU key to display the main menu on the screen. 2. Press / key to select "Time" option. 3. Press key to enter "Time" submenu. Off Time Off Time On Time In "Off Time” item, press button or ENTER button to enter the submenu, set the day & time to turn off the TV set. Sleep Timer On Time Clock 08:40 In "On Time” item, press button or ENTER button to enter the submenu, set the time to turn on the TV set, when the TV set is in the standby mode. You can also choose which day to control you TV set in a week. Auto Sleep Auto Sync Time Zone Sleep Timer 1. Press / key to select "Sleep Timer" option. 2. Press “” or "ENTER" key to confirm. 3. Press / key repeatedly until the desired time appears (Off, 10mins, 20mins, 30mins, 60mins, 90mins, 120mins, 180mins, 240mins). Notes: The sleep timer you have set will be cancelled when the TV turns off or if a power failure occurs. Notes: When the time is less than 60 seconds, remind information will be displayed on the screen. Press any key button to cancel timer function. Auto Sleep Press / key to select whether to open the No signal Power off features. If this function is opened, the TV will power off in ten minutes when there is no signal. Auto Sync You can modify the time of your TV set in Manual mode. In Auto mode, the “clock” is decided by the DTV signal. Clock When Auto Sync is on, the clock is got from DTV streams; Set the clock when Auto Sync is off. Time Zone You can choose it to modify your time zone in the TV set. 1. Press / key to select "Time Zone" option. 2. Press / key to select time zone. En - 18 Menu system instruction Option 1. Press MENU key to display the main menu on the screen. 2. Press / key to select "Option" option. 3. Press key to enter “Option" submenu. OSD Language 1. Press / key to select “OSD Language" option. 2. Press ENTER or key to select a proper language for OSD OSD Time Set the preferred amount of time for the OSD to be displayed on the screen. Closed Caption 1. Press / key to select “Closed Caption" option. 2. Press ENTER key to open CC submenu. OSD Language OSD Time Closed Caption Reset Network Configuration Software Upadate(USB) View End-User License Internet Update Check Network Update Information User Mode Reset 1.Press “/" key to select "Reset" option. 2.Press “" or "ENTER" key to confirm. 3.Press "Yes" to confirm again, TV will turn off automaticly and change all setting to factory setting. Network configuration Please refer to "Network setting"behind. Software Update(USB) When the TV need to be updated, please copy the new software to a USB storage and inset the USB storage to TV, then operating by following steps. 1.Press “/" key to select "Software Update(USB)" option. 2.Press “” or "ENTER" key to confirm. 3.Press "Yes" to confirm again, the TV will update by USB, Please wait a few minutes and don't turn off the power, it will turn off automaticly when updating is finish. View End-User License 1.Press “/" key to select "View End-User License" option. 2.Press “” or "ENTER" key to confirm. Internet Update Check 1.Press “/" key to select "Internet Update Check" option. 2.Press “” or "ENTER" key to confirm. Network Update Information 1.Press “/" key to select "NetworkUpdate Information" option. 2.Press “” or "ENTER" key to confirm. User Mode 1.Press “/" key to select "User Mode" option. 2.Press “” or "ENTER" key to confirm. 3.Switch to use mode "Home" or "Store". En - 19 Menu system instruction Lock The "Lock" feature automatically locks out programming that is deemed inappropriate for children. The user must first enter a Password before any of the lock restrictions can be set up or changed. 1. Press / key to select "Lock" option. 2. Press ENTER or key to enter "Lock" submenu, "Enter Password" menu will appear, enter your 4-digit password to enter "Lock” submenu (the default and universal password is 0000). Lock System Set the Lock function on or off. 1. Press / key to select "Lock System " option. 2. Press “” or "ENTER" key to confirm. Please Enter Password 3. Press / key to select "On" or "Off". Set Password 1. Press / key to select "Set Password" option. 2. Enter your 4-digit password to enter enter "Set Password" submenu. Choose any 4-digits for your new password and enter them. As soon as the 4 digits are entered, the cursor skipped to “Confirm Password” item, re-enter the same 4 digits, and your new password has been memorized. When the programs is locked, you can also press the menu key, Info key and so on. Then you can press / key to call back the input-password window. USA TV 1. Press / key to select "USA TV " option. 2. Press ENTER key to open USA TV menu. USA MPAA 1. Press / key to select "USA MPAA " option. 2. Press ENTER key to open USA MPAA menu. Canada English 1. Press / key to select "Canada English " option. 2. Press ENTER key to open Canada English menu. Canada French 1. Press / key to select "Canada French " option. 2. Press ENTER key to open Canada French menu. RRT Setting 1. Press / key to select "RRT Setting " option. 2. Press ENTER key to open RRT Setting menu. RRT Reset 1. Press / key to select "RRT Seset " option. 2. Press ENTER key to open RRT Seset menu. Block Unrated TV 1. Press / key to select "Block Unrated TV " option. 2. Press ENTER key to open Block Unrated TV menu. En - 20 Lock System Set Password USA TV USA MPAA Canada English Canada French RRT Setting RRT Reset Block Unrated TV Menu system instruction Channel Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an antenna or a cable system). 1. Press MENU key to display the main menu on the screen. 2. Press / key to select "Channel" option. 3. Press ENTER or key to enter "Channel" submenu. Antenna Mode Auto Search Program Edit DTV Manual Search ATV Manual Search Signal Information Antenna Mode 1.Press / key to select "Antenna" option. 2.Press / key to select "Antenna" or "CABLE" 3. Press “” or "ENTER" key to confirm. Auto Search 1. Press / key to select "Auto Search" option. 2. Press or ENTER key to confirm. then a notice window will be displayed on the screen. Select "Start" to start search or "Cancel" to cancel it. When searching, press EXIT key to exit tuning at any moment. Press MENU key to skip DTV tuning when searching DTV, skip ATV tuning when searching ATV. 3. After all the available channels are stored, the searching menu will exit. Program Edit After the program is searched, select “Program Edit” in the “Channel” menu, press “ENTER” button, program can be edited such as delete or skip according to the user's habit. Program Edit 14-1ATSC-1 14-1ATSC-2 14-1ATSC-3 50-1KOCE-HD 50-2KOCE-SD 50-3KOCE-LB MENU Delete Skip Fav Return Skip (Blue) Button This function can help shield certain program. Program skips when selecting program by the “/” button on the TV or remote control. 1. Select the program to be shielded in the“Program Edit”. 2. Press “Skip” (Blue) button, the skip mark is displayed at the left side of the program and this program is shielded. 3. To cancel the Skip function, enter the channel edit menu, select the shielded program and press “Skip” (Blue) button, the skip mark at the left side of the program disappears then program is recovered. Delete (Red) Button This function can help delete program. 1. Select the program to be deleted in the "Program Edit". 2. Press "Delete"(Red) button, the program will be deleted. En - 21 Menu system instruction Favorite(Yellow) button This function can help store the favorite program then these programs can be quickly selected. 1. Select the program which is favorite. 2. Press “Fav”(Yellow) Button, the favorite mark is displayed at the left side of the Program Edit is store into the Favorites. 3.To cancel the Favorite function, enter the program edit menu, select the program and press “Fav”(Yellow) button, the favorite mark at the left side of the program disappears. DTV Manual Search DTV Manual Search Enter digital number and press “ENTER” to select DTV Channel. UHF CH 40 DTV NO Signal Bad MENU ATV Manual Search 1. Press / key to select "ATV Manual Search" option. 2. Press or ENTER key to enter submenu. Normal Return Good ENTER Search ATV Manual Search Current CH 12 Fine-Tune Current CH 1. Press / key to select the Current CH. 2. Press / key to select current channel. Fine-Tune 1. Press / key to select the Fine-Tune. 2. Press / key to select a better frequency for current channel. Signal Information(Used only in DTV) 1. Press / key to select “Signal Information" option. 2. Press “ENTER”or key ,you can see the information of the DTV channel. En - 22 Frequency 205.250 Mhz Save MENU Return Channel 13 Name ATSC-1 Modulation ATSC-VSB Quality 100 Strength 100 NETWORK SETTING 1.Press the “Menu” to enter, then pitch on the ”Option”,and press “ENTER” or click the right button to enter the submenu. Picture OSD Language Sound OSD Time Function Closed Caption Reset Time Network Configuration Option Software Upadate(USB) View End-User License Lock Internet Update Check Channel Network Update Information User Mode 2.Pitch on the "Network Configuration",and press "ENTER" or click right button to enter the "Network Configuration". STATUS WIFI LAN Fail MODE: L AN IP: 0.0. 0.0 DNS: 0.0. 0.0 GATEWAY: 0.0. 0.0 EXIT Exit 3.When the wired network is used, if select dynamic IP address setting, pitch on the "Connect" in the "Network Configuration", then click the "Connect", and press the "ENTER"button to enter. If select static IP address setting,pitch on the "Manual" in the "Network configuration", then connect up the IP,Nemask,Gateway and DNS in sequence.When the connect complete,pitch on the "connect " and press the"Enter". En - 23 Network Setting STATUS WIFI LAN Network Configuration IP Netmask Gateway DNS Manual 000. 000. 000. 000 000. 000. 000. 000 000. 000. 000. 000 000. 000. 000. 000 Connect 4.If shows "Success",the "WLAN" on the bottom right corner will turn to green from red, and it means the network connect successfully; If shows "Fail", it means the network can not connect, please check whether the net wire and router connect successfully or not. STATUS WIFI LAN Network Configuration Au t o IP Netmask 000.0 00. 000. 000 000. 000. 0000 . 000 Gateway 000. 000. 000. 000 DNS 000. 000. 000. 000 Connect 5. Select the "WIFI" in the Network Configuration before using WIFI connecting. STATUS WIFI LAN Scan AP SSID Password Not Connected Network States IP Netmask 000. 000. 000. 000 Scanning... Gateway 000. 000. 000. 000 DNS 000. 000. 000. 000 000. 000. 000. 000 Connect En - 24 Network Setting "" " key to switch to 2. In the network interface " WIFI connection interface. 1. Press the menu button, a menu and choose "Option", under the Option menu , select "Network Configuration" interface for Network connection. 3. Press the " " and " " key to select Scan for AP, scanning can connect to the AP. 4. The scan is complete,and will appear a dialog ”Please select wifi connection mode”. 5 If you choose “Auto”,and press “ENTER”, there will be a AP list ,choose the AP will connect,press “ENTER” to confirm. 6. Select "Password", there will be a small keyboard, with small keyboard input WIFI Password, input is completed in accordance with the "RETURN" on the keypad. 7. Press the " " " " button with each SETTING. 8. In step 5,if you choose “Manual”,and press “ENTER”, there will appear a new frame,in this frame ,you can use the AP which be hidden,input the SSID and password, press “OK” to confirm. En - 25 Internet Press “HOME” key to enter internet interface 1. NETFLIX Use arrow key to Select button, then press “ENTER” key to enter NETFLIX. Input the right Email and password, then select “ Next” button and press“ENTER” key to login. Use arrow button to select one video and press “ENTER” key to play. Press “MENU” key to exit playing. Use arrow key to browse the pages. press “MENU” key to return to main menu and press “EXIT” key to exit. 2. Youtube Use arrow key to Select button, then press “ENTER” key to enter Youtube. Use arrow button to select one video and press “ENTER” key to play. Press key to open or close control menu when playing. 1:12 More Options En - 26 8: 47 Internet 3.VUDU Use arrow key to Select button, then press “ENTER” key to enter VUDU. 4.pandora Use arrow key to Select button, then press “ENTER” key to enter pandora. Input the right Email and password, then select “login” button and press PANDORA “ENTER” key to login. Welcome to pandora Do you have a pandora account? I have a Pandora Account I am new to Pandora 5.Twitter Use arrow key to Select button, then press “ENTER” key to enter Twitter. Input the right Email and password, then select “Authorize app” button and press “ENTER” key to log in. OK Enter EXIT Quit En - 27 Internet Use arrow key to browse the pages. press “MENU” key to return to main menu and press “EXIT” key to exit twitter. Red key: log in or log out twitter. Green key: refresh current page. Yellow key: write new tweet. Blue key: Search tweet. 6.Facebook Use arrow key to Select button, then press “ENTER” key to enter Facebook. Input the right Email and password, select “log In” button, then press “ENTER” key to log in. Press arrow key to browse the pages and press “ENTER” key to view. Press “MENU” key to return the main menu. Press “EXIT” key to exit Facebook. Red key: log in or log out Facebook. En - 28 Internet 7.Accuweather Use arrow key to Select button, then press “ENTER” key to enter Accuweather. Input a city or zip code press select to get the weather information. 8.Screencast Use arrow key to Select button, then press “ENTER” key to enter Screencast. En - 29 Digital Media Player Introduction This TV is embedded with one USB port digital media player. It can find the devices support USB1.1/2.0,including flash disk, USB hard disk and digital camera. It supports functions as: Display pictures. Play video files. Notice: 1. In order to avoid affecting the user's viewing experience, please use the better quality and shorter USB cable. 2. Play, preview some of the non-standard files may appear abnormal, please understand. Explain: 1. Under the USB channel,you can use only the remote control. 2. Play Control menu to enter the playing surface to press the menu button pop-up menu Data Format Picture JPEG Video Motion-JPEG Remote Control Button Input Description of Buttons: Buttons AUDIO CC Back YELLOW RED Menu Q.MENU ENTER Backward Forward ENTER Back Exit VOL CH Mute CC MTS/ Audio CC RED En - 30 Function Track switch (video) Subtitle switch (video) Show/Hide movie info (video) AB-Repeat (Video) Goto Time(Video) Play/Pause TTS P.Mode Sleep List S.Mode INFO MTS/AUDIO YELLOW INFO PARENTAL CONTROL Press the MENU button on the main unit or on the remote control and then press buttons to select LOCK menu. Use the 0-9 buttons to input the 4-digit password to enter the LOCK menu. If used, this option feature can "block'' undesirable programming from appearing on the TV. Parental Control offers the user a wide variety of options and settings that restrict or "block'' the programming that can appear on the TV. Parental Control which program rating they consider acceptable for younger more allows the user to the sensitive viewer. It can be preset and turned either on or off by the user who secret 4-number code, the password. The number of hours blocked are General audiences and children blocks should be both programmed into the TV's memory. Separate different viewer ratings are for both TV and the motion picture Industry; both rating systems should be used and based on the ages of children. Overview To ensure complete coverage for all TV programs, (movies and regular TV shows) choose a rating for MPAA, from the selections below,as well as ratings from the TV Parental Guidelines Rating Systems below, using the Age Block option for General Audiences, and for children.In addition, you may wish to add additional restrictions from the content block menu, and submenus examples below. Things to Consider before Setting up Parental Control Determine which rating you consider acceptable to the viewer. (For example,if you choose TV-PG, more restrictive ratings will be automatically blocked; the viewer will not be able to see: TV-PG,TV-14,or TV-MA rated programming.) You may block the auxiliary video source entirely. (Blocks the signal sent by the equipment, such as VCR, connected to the TV Audio/ VIdeo Input Jacks) or remain unblocked, then choose acceptable ratings. Block program "Content" based on individual parameters such as: Strong Dialog, Bad Language, Sex Scenes,Violence Scenes or Fantasy. Violent Scenes; in Content Blk option. Select a secret password, in the Set Password option, using the numbers keys on the remote control.Save the password, it is the only way to access the Parental Control menu and change rating setting, or turn off Parental Control. • You can set different Parental Control viewing restrictions for general audiences and for children, both can be active at the same time. • Simply specifying one content block such as Sex Scenes, will not automatically restrict the programming that appears from the video sources. • Even If you choose to leave the AUX Inputs unblocked, the ratings you specify will automatically restrict the programming that appears from the video sources. • You cannot disable Parental Control by disconnecting the TV from power. Block if power is hours will be automatically reset to the original block time setting disconnected. En - 31 PARENTAL CONTROL • Motion Picture Association of America (MPAA) Rating System PG Grade General Audiences Parental Guidance Suggested PG13 Parents Strongly Cautioned Restricted NC-17 NR No children under age 17 Hard Core Films No Rating Meaning Content not offensive to most viewers. Content is such that parents may not want their children to view the program. Program is inappropriate for preteens, with a greater degree of offensive material suggested than a PG rated program. Not for children under 17-contains strong element of sex and/or violence. Not for children under 17-under any circumstances. Contains strong sexual content. Same as NC-17 rating. MPAA did not rate • TV Parental Guideline Rating System TV-Y TV-Y7 Grade All Children Directed to Older Children TV-G General Audience TV-PG Parental Guidance Suggested TV-14 TV-MA TV-NONE Parents Strongly Cautioned Mature Audience Only Block Unrated TV Meaning Content not offensive to most viewers. Considered suitable for children over 7- may contain fantasy violence scenes. Considered suitable for all audience; children may watch unattended. Suggested unsuitable for younger children-may contain suggestive language, bad language, sex and violence scenes. unsuitable for children under 14 - may contain strong language, bad language, sex, and violence scenes. Adults only- may contain strong language, bad language, sex, and violence scenes. Only play with levels of TV programs, shielding no levels of TV programs. Canadian Rating: Canadian English is used throughout all English-speaking Canada (C, C8+,G, PG,14+, 18+). Canadian French is used in Quebec (G,8 ANS+ ,13 ANS+,16 ANS+, 18 ANS+) Note: The V-Chlp will automatically block certain categories that are "more restrictive".If you block TV-Y category,then TV-Y7 will be automatically blocked. Similarly,if you block TV-G category,then all the categories in the "young adult" will be blocked (TV-G, TV-PG,TV-14,and TV-MA). En - 32 TROUBLESHOOTING If your TV does not operate normally or cannot be turned on, please check the following troubleshooting questions. Remember also to check any other connected electronic device, such as DVD or Blu-ray player to pinpoint the problem. If the TV still fails to operate normally, please contact technical support. The TV does not operate properly The TV does not respond • The TV may freeze up during use. Disconnect the power when pressing any cord from the power socket for a few minutes. Reconnect the buttons power cord and try to operate it again as usual. • Check that the TV is connected to the power supply. TV cannot be switched on • Make sure all connected AV devices are switched off before switching on your TV. • Check to see if there are any objects between the TV and the remote control causing an obstruction. Ensure that you are The remote control does pointing the remote control directly at the TV. • Ensure that the batteries are installed with the correct polarity not work (+ to +, - to -). • Install new batteries. • Check the power of the TV. The power supply maybe Power is suddenly turned interrupted. off • Check if the sleep timer is set. • Check whether the Auto Standby is activated. The video function does not work • Check whether the TV is switched on. No picture & No Sound • Try another channel. The problem may be caused by the broadcaster. • This is normal; the image is muted during the TV startup Picture appears slowly process. Please contact your service centre if the picture has after switching on not appeared after minutes. • Adjust the settings in the PICTURE menu. No or poor color or poor • Try another channel. The problem may be caused by the picture broadcaster. • Check if video cables are connected properly. Horizontal/Vertical bar or • Check for local interference such as an electrical appliance picture shaking or power tool. • The station or cable channel may be experiencing problems; tune to another station. Poor reception on some • Station signal may be weak, reposition the antenna for better channels reception. • Check for sources of possible interference. Lines or streaks in • Check antenna (change the position of the antenna.) pictures No pictures when • Check if the input source is HDMI1/HDMI2 . connecting HDMI Pictures appear in wrong • Adjust the Aspect Ratio settings in the FUNCTION menu. ratio En - 33 TROUBLESHOOTING The audio function does not work • Press the VOL +/- buttons. • Sound muted? Press the MUTE button. Picture OK but no sound • Try another channel. The problem may be caused by the broadcaster. No output from one of the • Adjust the Balance settings in the AUDIO menu. speakers • A change in ambient humidity or temperature may result in Unusual sound from an unusual noise when the TV is switched on or off and does inside the TV not indicate a fault with the TV. No sound when • Check if the input source is HDMI1/HDMI2 . connecting HDMI • Keep the RF coaxial cable away from the other connected Audio noise cables. Password • Select the SET Password setting in the LOCK menu, then enter the following master password “1980”. The master Lost password password clears your previous password and allows you to enter a new password. Maintaining • Do not use your TV in areas that are too hot or too cold, because the cabinet may warp or the screen may malfunction. Your TV works best in temperatures that are comfortable to you. • Storage temperatures are 32° to 122°F(0° to 50°C) • Working temperatures are 32° to 95°F(0° to 35°C) • Do not place your TV in direct sunlight or near a heat source En - 34 SPECIFICATION Panel Size Display Type Panel Technology Panel 60 Hz Vs. 120 Hz Panel Resolution Aspect Ratio Dynamic Contrast Ratio-Panel Brightness (Centre Typ.) Cd/M² Response Time (G To G) Lamp Life (Typ. Hours) Horizontal Viewing Angle Vertical Viewing Angle Wall-mount(LxW-mm) 60 inch diagonally DLED TFT 60 Hz 3840 x 2160 16:9 5000:1 240~360 8 ms 20,000 hours 60 60 400*200(mm) The FCC Wants You to Know FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. IC warning This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. En - 35 Application Remote control manual NETFLIX Application Remote Control Manual Turn TV on or off Input Input text Enter VUDU application Enter to NETFLIX ORIGINAL menu Menu Q.MENU Press this button can exit NETFLIX Confirm the selection Press these buttons to select items Return to the previous step Press these buttons to adjust volume ENTER Back Exit Press this button can pop up message box to select whether exit NETFLIX or not Enter to APP HOME menu VOL CH Mute Mute and restore sound Start playback or pause Select the language of the subtitles invideo En - 36 MTS/ Audio CC TTS P.Mode Sleep List S.Mode INFO Stop the video Display the Video information Application Remote control manual YouTube Application Remote Control Manual Turn TV on or off Input pop up the YouTube Setting menu Enter VUDU application Enter to NETFLIX ORIGINAL menu Menu Q.MENU Confirm the selection Press these buttons to select items Return to the previous step Press these buttons to adjust volume ENTER Back Exit Press this button to exit YouTube Enter to APP HOME menu VOL CH Mute Mute and restore sound Start playback or pause MTS/ Audio CC TTS P.Mode Sleep List S.Mode INFO Stop the video En - 37 Application Remote control manual VUDU Application Remote Control Manual Turn TV on or off Input Enter VUDU application Enter to NETFLIX ORIGINAL menu Menu Q.MENU Press this button to go back to VUDU main menu Confirm the selection Press these buttons to select items Return to the previous step Press these buttons to adjust volume ENTER Back Exit Press this button to exit VUDU Enter to APP HOME menu VOL CH Mute Mute and restore sound Start playback or pause Select the language of the subtitles invideo En - 38 MTS/ Audio CC TTS P.Mode Sleep List S.Mode INFO Stop the video Application Remote control manual Pandora Application Remote Control Manual Turn TV on or off Input Enter Pandora application Enter VUDU application Enter to NETFLIX ORIGINAL menu Menu Q.MENU Confirm the selection Press these buttons to select items Return to the previous step Press these buttons to adjust volume ENTER Back Exit Press this button to exit pandora Enter to APP HOME menu VOL CH Mute Mute and restore sound Start playback or pause Select the language of the subtitles invideo MTS/ Audio CC TTS P.Mode Sleep List S.Mode INFO Stop the video En - 39 Application Remote control manual Twitter Application Remote Control Manual Turn TV on or off Input Input text Delete function Enter VUDU application Enter to NETFLIX ORIGINAL menu Menu Q.MENU Press this button to enter twitter main menu Confirm the selection Press these buttons to select items Return to the previous step Press these buttons to adjust volume ENTER Back Exit Press this button to exit twitter Enter to APP HOME menu VOL CH Mute Mute and restore sound MTS/ Audio CC Red:Change User/Green:Refresh Yellow:Tweet/Blue:Search En - 40 TTS P.Mode Sleep List S.Mode INFO Application Remote control manual Facebook Application Remote Control Manual Turn TV on or off Input Input text Delete function Enter VUDU application Enter to NETFLIX ORIGINAL menu Menu Q.MENU Return function Confirm the selection Press these buttons to select items ENTER Return to the previous step Press these buttons to adjust volume Back Exit Press this button to exit facebook Enter to APP HOME menu VOL CH Mute Mute and restore sound MTS/ Audio CC Red:Change User/Green:Refresh TTS P.Mode Sleep List S.Mode INFO En - 41 Application Remote control manual AccuWeather Application Remote Control Manual Turn TV on or off Input Input text Delete function Enter VUDU application Enter to NETFLIX ORIGINAL menu Menu Q.MENU Confirm the selection Press these buttons to select items Press these buttons to adjust volume ENTER Back Exit Press this button to exit AccuWeather Enter to APP HOME menu VOL CH Mute MTS/ Audio CC En - 42 Mute and restore sound TTS P.Mode Sleep List S.Mode INFO Application Remote control manual Screencast Application Remote Control Manual Turn TV on or off Input Enter VUDU application Enter to NETFLIX ORIGINAL menu Menu Q.MENU Confirm the selection Press these buttons to select items Press these buttons to adjust volume ENTER Back Exit Press this button to exit screencast Enter to APP HOME menu VOL CH Mute Mute and restore sound MTS/ Audio CC TTS P.Mode Sleep List S.Mode INFO En - 43
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2018:08:23 13:34:58+08:00 Creator : Adobe InDesign CS5 (7.0.2) Modify Date : 2018:08:23 13:35:14+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2018:08:23 13:35:14+08:00 Creator Tool : Adobe InDesign CS5 (7.0.2) Format : application/pdf Document ID : uuid:1988ccf5-e6f4-4f39-90e7-a38c7e6b54b8 Instance ID : uuid:f485b042-588a-45a9-8524-8c1f786410ba Producer : Adobe PDF Library 9.9 Page Count : 44EXIF Metadata provided by EXIF.tools