CIDMATE Technology GH9764 2.4GHz DSST Multi-Handset w/ CID+DAM User Manual Part 1

CIDMATE International Technology Inc. 2.4GHz DSST Multi-Handset w/ CID+DAM Part 1

Contents

Part 1

2.4 GHz DIGITAL SPREAD SPECTRUM ALL DIGITALANSWERING SYSTEM WITH CALLER ID / CALL WAITING& SPEAKERPHONE IN BASE UNIT54 CHANNEL AUTOSCAN WITH 4 SEPARATE MAILBOXESMULTIPLE HANDSETS FEATUREModel GH9764OWNER’S MANUALINSTALLATION ANDOPERATINGINSTRUCTIONSPLEASE READ THISMANUAL CAREFULLYBEFORE USE.KEEP FOR YOURREFERENCE.For installation information, pleasesee “Getting Started” instructionson page 6 or your separate QuickStart Guide.Visit Us on the Web:www.uselectronics.info© 2004 Bellsouth Corporation
11IMPORTANT:The BASE UNIT IN USE LED indicator will light up RED when theHANDSET is properly positioned in the BASE UNIT CHARGE CRADLE andcharging. Securely positioning the HANDSET in the BASE UNIT will alsoprevent the HANDSET from falling.Wall Mounting
12Preparing for UseBefore you can use your cordless telephone, you must charge the HANDSET for 12 hours.Failure to do so will require more frequent recharging of the BATTERY PACK, See page44 for more information on the BATTERY PACK.1. Place the HANDSET on the BASE UNIT for 12 hours.2. After 12 hours, remove the HANDSET from the BASE UNIT.The “RING: HI” should be displayed on the LCD Screen. If you see “WAIT REG.” on theLCD Screen, please do handset registration as described in page 29.NOTE:Depending on the frequency of use, once the HANDSET is fully charged, it remains functionalfor approximately 4 hours of continuous use and approximately 5 days when the HANDSET isoff the BASE UNIT in STANDBY mode.NO LINE IndicatorThis telephone checks for an active TELEPHONE LINEconnection. If “NO LINE” appears on the LCD Screen,when the HANDSET is in STANDBY mode, no calls canbe made or received from this telephone. Check that theTELEPHONE LINE CORD plugs are connected to thewall TELEPHONE JACK and the BASE UNITTELEPHONE LINE CONNECTION JACK. If “NO LINE”continues to be displayed, check that the other phonesin the house are working. If none of the phones work,contact your local phone company.Receiving Calls From the HANDSET1. When the phone rings, lift the HANDSET and pressthe button. The HANDSET LCD Screen willdisplay “CALLS” and “TALKING”, and the BASEUNIT IN USE LED indicator will light up GREEN.2. Start your conversation.3. To end your conversation, either press the button or place the HANDSET on the BASE UNIT. Ifyou place the H A N D S E T on the BASE UNITCHARGE CRADLE, you activate the automaticSTANDBY feature.talktalkCordless Telephone OperationTALKING. . . .CALLS
13NOTE:1. The Call Timer will start to count once you press the button.2. The LCD Screen emits light for 5 seconds every time you press any buttons on theHANDSET.3. When “CALLS” appears on the LCD Screen, it means that the HANDSET is OFF-HOOK(connected to the telephone line).Receiving Calls Using the BASE UNIT SPEAKERPHONE1. When the phone rings, press the buttonand begin speaking.2. The LED Message Display will show “ ”.3. The S P E A K E R P H O N E speaker volume can beadjusted by pressing the and . TheLED Message Display will indicate the speakervolume as:“0” - Speaker off“1~8” - Volume from low to high4. To hang up, press the button again.SPEAKERvol -vol +SPEAKERtalkCALLS00MIN 1SEC 14MinutesSecondsChannelCordless Telephone OperationIMPORTANTIn order to utilize the Caller ID feature, you mustsubscribe to Caller ID service from your localtelephone company.
14Placing Calls1. Press the button, the Call Timer starts to count.The HANDSET LCD Screen will display “CALLS”, and“TALKING”, and the BASE UNIT IN USE LED indicatorwill light up GREEN.2. Listen for a dial tone.3. Dial the phone number.4. When you have finished with your call, press the button again or place the HANDSET on the BASE UNIT.OR1. Dial the phone number.2. Press and hold down the DIAL 7 or the DIAL 10or the DIAL1+ button. The BASE UNIT INUSE LED indicator will light up RED.3. When you have finished with your call, press the button again or place the HANDSET on the BASE UNIT.Headset FeatureYour telephone can utilize a headset (not included) to beconnected to your HANDSET for you to enjoy hands-freecommunication. Pull out the HEADSET JACK COVER theninsert the small plug at the end of the headset into theHEADSETJACK at the right side of the HANDSET. Follow theprocedures discussed in “Receiving Calls” and “Placing Calls”to receive and place a call.NOTE:When you plug the headset plug into the HEADSETJACK it automatically mutes the MICROPHONE andSPEAKER of the HANDSET. Unplug the headset toreturn the HANDSET to normal use.Headsets are available at most retail outlets that sell telephoneequipment. The HEADSET JACK is compatible with 2.5mmheadset plugs only.talk#1+*7talktalkCordless Telephone OperationTALKING. . . .CALLS
15Redial Feature1. If you get a busy tone, press the button or placethe HANDSET on the BASE UNIT to hang up.2. Later, press the button again.3. Listen for a dial tone.4. Press the button. This will automaticallyredial the last telephone number you called in TALKmode.5. When you have finished with your call, press thebutton again (the BASE UNIT IN USE LEDindicator will turn off) or place the HANDSET on theBASE UNIT.NOTE:If you are too far away from the BASE UNIT, the HANDSET emits “beep” sounds to warn youthat the background noise level is too high for proper communication between the HANDSETand the BASE UNIT. When you hear this sound, you should move closer to the BASE UNIT toreduce the noise level. Otherwise, the call will automatically cut off.talkredialsave/pausetalktalkCaller ID System Operation
16Caller ID SystemThis telephone automatically displays an incoming caller’s name and telephone numbertogether with the date and time of the call. It records up to 80 calls and stores the data inMemory.IMPORTANT: You must subscribe to the Caller ID service from your local telephone companyto utilize this feature.Viewing Caller Information During Incoming Calls1. When there is an incoming call, the name and the telephone number of the caller willautomatically appear after the second ring. Press the SHIFT RIGHT button to viewa name of more than 11 characters.ORCaller’s telephone number will appear if the caller’s name is not available.OR“OUT OF AREA” will appear if the origin of theincoming call does not support the Caller ID system.OR“UNKNOWN” will appear if the origin of the incomingcall has no name and does not support the Caller IDsystem.OR“PRIVATE” and/or “P---------” will appear if the caller’sname and/or telephone number is blocked.OR“DATA ERROR” will appear if wrong data was received from the telephone line.ORThe name stored in the DIRECTORY will appear for an incoming call with matchingtelephone numbers.MSG WAITING (Message Waiting)The MSG WAITING GREEN LED indicator will blink when there is a message for you fromyour telephone company if you have subscribed to Voice Mail message service and if youhave requested Visual Message Indication from your local telephone company. “MSGWAITING” will appear on the LCD Screen in STANDBY mode. (To remove the MESSAGEWAITING indicator, see page 28 for detail.)Caller ID System OperationMICHAEL BROW6 0 4 - 5 5 5 - 1 2 1 210:00AM 8/24 NEW #1TimeBROWING6 0 4 - 5 5 5 - 1 2 1 210:00AM 8/24 NEW #1Month/Date Number of calls recordedOUT OF A R E AO - - - - - - - - - -10:00AM 8/24 NEW #13 TOTAL 42e.g.U N K N O W NU - - - - - - - - - -10:00AM 8/24 NEW #13 TOTAL 42e.g.
17Call WaitingWhen you subscribe to a Call Waiting service from your local telephone company, thistelephone will display the name and number of the second caller while you are having aconversation with your first caller.1. When you are having a conversation, thistelephone will automatically display the name andnumber of the second caller. The name will blink.2. Press the button to answer the second caller.The first caller’s name and number will bedisplayed. The name will blink.3. When you have finished, press the button tocontinue your conversation with the first caller.If you do not want to interrupt your phone conversationwith the first caller, you can advise the second caller toleave a Voice Mail message instead. Voice Mail FunctionWhen there is a Voice Mail message for you, this telephone detects a Stutter Dial Tone (ifapplicable) and the “MSG” icon on the LCD Screen and the MESSAGE WAITING LEDindicator will blink.1. To access your Voice Mail message, press the button.2. After you hear a dial tone, press the button. This will automatically dial theVoice Mail Post Code in your area and connect you to the Voice Mail service provider.NOTE: You must store the Voice Mail Post Code number by using the VOICE MAILfunction on page 28. You can also call your Voice Mail service provider by dialingthe Voice Mail Access Code number after pressing the button.C-F (Forwarded Call)Appears on the upper left hand side of the LCD Screen, when the incoming call has beenassigned to your telephone number.L-D-C (Long Distance Call)Appears on the upper left hand side of the LCD Screen, when the incoming call is a longdistance call and the service is provided by your local telephone company.Caller ListRecords call information for up to 80 incoming calls such as caller’s name and telephonenumber together with the date and time of the call. After recording a new incoming call, the NEWCALL indicator will blink and the LCD Screen will display:talkmenuvoice mailtalkeditflasheditflashCaller ID System OperationJOHN BROWN2 3 5 - 6 0 7 - 5 5 1 210:00AM 8/24 NEW 13 e.g.ALEX BROWTH5 0 4 - 5 5 5 - 1 2 1 210:00AM 8/24 NEW 14 e.g.1st Caller2nd CallerRING: HI10:00AM 8/24 NEW 13 TOTAL 42 No. of new callsMaximum calls= 80
18Viewing the Caller List1. Press the SCROLL DOWN button to view the latest Caller ID record, or press theSCROLLUP button to view the first Caller ID record, press the SHIFTRIGHTbutton if the name has more than 11 characters.2. Press the button to go back to STANDBY mode. (If no active buttons are pressedfor 20 seconds or you have viewed the last Caller ID record in the Caller’s List, the LCDScreen will automatically return to STANDBY mode.)Placing a Call from the Caller List1. With the HANDSET in STANDBYmode, press the SCROLLDOWN button to selectfrom the latest Caller ID record, or press the SCROLL UP button to select from thefirst Caller ID record.2. Press and hold down the DIAL 7 button for a local call, or the DIAL 10 button for a local call with area code, or the DIAL1+ button for a long distance call.3. To end your conversation, either press the button or place the HANDSET on theBASE UNIT.To place a call from the Caller List in TALK mode, press the button, then followsteps 1 through 3.NOTE: You can edit the number before dialing, but you can not SAVE any changes in theCaller List.Editing the Caller List before Dialing1. Press the SCROLL UP or DOWN button to find the Caller ID record.2. Press the button.3. Move the cursor by pressing the SHIFTLEFT or RIGHT button to the digit youwant to change. To erase digits, press the button. To add digits, usetheTELEPHONE KEYPAD ~buttons.4. Press and hold down the DIAL 7 button for a local call, or the DIAL 10 button for a local call with area code, or the DIAL 1 + button for a long distancecall.5. To end your conversation, either press the button or place the HANDSET on theBASE UNIT.To save the edited record from the Caller List, follow steps 1 through 3 then press and holddown the button.redialsave/pausetalk#1+*7wxyz 9deletescaneditflashtalktalk#1+*7Caller ID System OperationMICHAEL BROW6 0 4 - 5 5 5 - 1 2 1 210:00AM 8/24 NEW#1BROWING6 0 4 - 5 5 5 - 1 2 1 210:00AM 8/24 NEW#1
19Saving the Name and Number in the Caller List into the DIRECTORY1. Press the SCROLL UP or DOWN button to find the Caller ID record.2. Press and hold down the button. The LCD Screen will show “SAVED”.NOTE:It is not advisable to save a telephone number without the corresponding name.This will lead to improper display on PRIVATE and OUT OF AREAcalls.Deleting All Records in the Caller List1. Press and hold down the button for at least3 seconds while in STANDBY mode.2. The LCD Screen will automatically return toSTANDBY mode.Selective Deleting in the Caller List1. Press the SCROLLUP or DOWN button to find the Caller ID record while inSTANDBY mode.2. Press and hold down the button for at least3 seconds, then the LCD Screen will display thenext Caller ID record in the CALLER LIST.3. Press the button to return to STANDBYmode.Special Note to Caller List for Multiple Handset UserIn this multiple HANDSET cordless phone, the up to 80 incoming calls caller list are stored inthe BASE unit. No matter how many HANDSETS link to the same BASE unit, they share thesame caller list. Each HANDSET can view the caller list, place a call from the caller list, deletethe record in caller list, and save the record in the caller list into the directory memory of eachHANDSET.When a record in caller list is deleted by one of the HANDSET, the other HANDSETS can notview and use the record again. We suggest that each HANDSET user saves the record in callerlist, which the number he will call frequently, into the directory memory of his own HANDSET.Name and Telephone Number DIRECTORYThis DIRECTORY lets you scroll through the list to find the record you need for one touchdialing. You can store up to 40 names and telephone numbers in the memory.deletescandeletescanredialsave/pauseCaller ID System OperationALL DELETE10:00AM 8/24 NEW 0TOTAL0DELETE10:00AM 8/24 #2
20Viewing the DIRECTORY1. Press the button.2. Press the SCROLL UP or DOWN button to find the record you wish to view, press theSHIFT RIGHT button to view a name ortelephone number of more than 11 characters.NOTE: To exit the DIRECTORY List at anytime,press the button.Speed Viewing the DIRECTORY1. Press the button.2. Enter the first letter of a name. (See Page 31 for detail of entering a letter.)3. Press the SCROLLUP button to view all names with the same first letter.Saving in the DIRECTORY1. Press the button.2. Press the button.3. Use the TELEPHONE KEYPAD ~ buttons to enter the name, (see page31 for detail) you can store up to 15 characters. To move the cursor to the right, createaspace, or to enter a new letter, press the SHIFT RIGHT button.4. Press the SCROLLDOWN button once.5. Enter the telephone number using the TELEPHONE KEYPAD ~ buttons.You can store up to 16 digits.6. Press and hold down the button.7. Press the button to go back to STANDBY mode.(If no active buttons are pressed for 20 seconds, the LCD Screen will automatically returnto STANDBY mode.)redialsave/pausewxyz 9wxyz 9editflashCaller ID System OperationDIRECTORY10:00AM 8/24 TOTAL 12 DIRNo. of records storedMICHAEL BROW6 0 4 - 5 5 5 - 1 2 1 2#8TOTAL12BROWING6 0 4 - 5 5 5 - 1 2 1 2#8TOTAL12DIR DIR
21NOTES: 1. It will not save a duplicate telephone number or a name without thecorresponding telephone number in the DIRECTORY.2. To delete a character or number inside the cursor, press the button.PREFERRED CALLSYou can assign stored numbers a PREFERRED CALLstatus which will generate a specialringer sound at the start of the second ring to any welcome caller in the DIRECTORY.When you are saving the name and number into the DIRECTORY, add a “#” symbol at thebeginning of the name by pressing the button.BLOCKED CALLSYou can assign stored numbers a BLOCKED CALL status which will disable the ringersound after the second ring to any caller in the DIRECTORY.When you are saving the name and number into the DIRECTORY, add an “*” symbol at thebeginning of the name by pressing the 7 button.Editing a Name and Number in the DIRECTORY1. Press the button.2. Press the SCROLL UP or DOWN button to find the record you want to edit.3. Press the button to edit the name, and the cursor will blink over the first character.4. Press the SCROLLLEFT or RIGHT button to move the cursor to the letter ornumber you want to change. To erase, press the button. To add, use theTELEPHONE KEYPAD ~ buttons. (See page 31 for details.)5. Press the SCROLL UP or DOWN button to edit the number.wxyz 9deletescaneditflash*7#1+deletescanCaller ID System OperationMICHAEL BROW6 0 4 - 5 5 5 - 1 2 1 2#8TOTAL12DIRMICHAEL BROW6 0 4 5 5 5 1 2 1 2#8TOTAL12DIRcursor is blinking
226. Press the SCROLLLEFT or RIGHT button to move the cursor to the numberyou want to change. To erase, press the button. To add, use the TELEPHONEKEYPAD ~ buttons. (See page 31 for details.)7. Press and hold down the button to confirm.IMPORTANT:It is not advisable to save a telephone number without the correspondingname in the DIRECTORY. This will lead to improper displays on PRIVATEand OUT OF AREA calls.NOTE:When no active buttons are pressed for 20 seconds, the LCD Screen willautomatically return to STANDBY mode.Editing the Number in the DIRECTORY before Dialing1. Press the button.2. Press the SCROLL UP or DOWN button to find the caller.3. Press the button to edit the name.4. Press the SCROLL DOWN button.e.g.5. Press the SCROLLLEFT or RIGHT button to move the cursor to the numberyou want to change.To erase, press the button.To add, use the TELEPHONE KEYPAD ~ buttons.6. Press and hold down the DIAL 7 button for a local call, or press and hold downthe DIAL 10 button for a local call with area code, or press and hold down theDIAL1+ button for a long distance call.7. To end your conversation, either press the button or place the HANDSET on theBASE UNIT.talk#1+*7wxyz 9deletescaneditflashredialsave/pausewxyz 9deletescanCaller ID System OperationMICHAELBROW6 0 4 5 5 5 1 2 1 2#1TOTAL12DIR6cursor is blinkingMICHAELBROW6 0 4 5 5 5 1 2 1 2#8TOTAL12DIR6cursor is blinking
23NOTE:If you want to save the edited number in the DIRECTORY, follow steps 1 through5 and then press and hold down the button.Placing Calls from the DIRECTORY1. Press the button.2. Press the SCROLL UP or DOWN button to find the record you want to call.3. Press and hold down the DIAL 7 button for a local call, or press and hold downthe DIAL 10 button for a local call with area code, or press and hold down theDIAL 1+ button for a long distance call.4. To end the call, either press the button or place the HANDSET on the BASEUNIT.Deleting All Records in the DIRECTORY1. Press the button.2. Press and hold down the button for at least 3 seconds while in DIRECTORYmode.3. Press the button to return to STANDBY mode.Selective Deleting in the DIRECTORY1. Press the button.2. Press the SCROLLUP or DOWN button to find the record you want to delete.3. Press and hold down the button for at least 3 seconds, then the LCD Screen willdisplay the next record in the DIRECTORY.4. Press the button to return to STANDBY mode.deletescandeletescantalk#1+*7redialsave/pauseCaller ID System OperationALL DELETE10:00AM 8/24 TOTAL 0DELETE#5TOTAL 12
24Function OperationYou can change the settings on the HANDSET through the functions menu.This unit contains the following special functions:A. LANGUAGE F. PBX NUMBER K. HANDSETB. SILENT ON/OFF G. FLASH TIME REGISTRATIONC. TIME SET H. PAUSE TIME L. RESETD. RINGER VOLUME I. VOICE MAILE. LCD CONTRAST J. MSG WAITINGTo access, press the button at STANDBY mode, then press the TELEPHONEKEYPAD ~ , , and button or the SCROLLUP or DOWN button.#1+*7wxyz 9menuvoice mailCaller ID System OperationENGLISH#1TOTAL12KEYPAD Button1SILENTOFF#2TOTAL12KEYPAD Buttonabc 2TIME SET10:00AM 8/24 #3TOTAL12KEYPAD Buttondef 3RING: HI#4TOTAL12KEYPAD Buttonghi 4CONTRAST5#5TOTAL12KEYPAD Buttonjkl 5PBX NO.OFF#6TOTAL12KEYPAD Buttonmno 6FLASH TIME600#7TOTAL12KEYPAD Buttonpqrs 7PAUSE TIME4#8TOTAL12KEYPAD Buttontuv 8MSG WAITINGOFF#10 TOTAL12KEYPAD ButtonVOICE MAIL#9TOTAL12KEYPAD Buttonwxyz 9EXT REG.- -#11 TOTAL12KEYPAD Button*7RESET#12 TOTAL12KEYPAD Button#1+
25A. LanguageThis telephone offers English, Spanish, French, and Portuguese languages for yourconvenience.1. Press the button.2. Press the TELEPHONE KEYPAD button.3. Press the button.4. Press the SCROLL UP or DOWN button to select the language you desire.You can also set the language by pressing the following TELEPHONE KEYPAD buttons;for English, for Spanish, for French, or for Portuguese.English is the preset language.5. Press and hold down the button.6. Press the button to return to STANDBY mode.B. Silent On/OffThis telephone will generate the first ring sound even in the BLOCKED CALL mode toindicate that you have an incoming call. To keep the ringer silent in BLOCKED CALLmode,you can turn off the first ring sound.1. Press the button.2. Press the TELEPHONE KEYPAD button.3. Press the button.4. Press the SCROLL UP or DOWN button to select the SILENT ON/OFFsetting. You can also press the TELEPHONE KEYPAD buttons; for ON or for OFF. SILENT OFF is the preset mode.5. Press and hold down the button.6. Press the button to return to STANDBY mode.C. Time SetSet the date and time.1. Press the button.2. Press the TELEPHONE KEYPAD button.3. Press the button.4. Use the TELEPHONE KEYPAD button to enter the month, date, hour, and minute. Thecursor moves automatically after entering each item. Press the TELEPHONE KEYPADfor AM setting, or press the TELEPHONE KEYPAD for PM setting.abc 21editflashdef 3menuvoice mailmenuvoice mailredialsave/pauseabc 21editflashabc 2menuvoice mailmenuvoice mailredialsave/pauseghi 4def 3abc 21editflash1menuvoice mailCaller ID System Operation
265. Press and hold down the button.6. Press the button to return to STANDBY mode.NOTE:The date and time will automatically set, if you have subscribed to the Caller IDservice from your local telephone company.D. Ringer VolumeThis function enables you to adjust the ringer volume from HI, LOW, and OFF as desired.1. Press the button.2. Press the TELEPHONE KEYPAD button.3. Press the button.4. Press the SCROLLUP or DOWN button to adjust the ringer volume suitablefor your convenience. You can also adjust the ringer volume by pressing the followingTELEPHONE KEYPAD buttons; for HI, for LOW, or for OFF. HI isthe preset ringer volume.5. Press and hold down the button.6. Press the button to go back to STANDBY mode.E. LCD ContrastThis unit enables you to select 8 brightness levels for the Large LCD Screen.1. Press the button.2. Press the TELEPHONE KEYPAD button.3. Press the button.4. Press the SCROLL UP or DOWN button to adjust the brightness of the LCDScreen. Level 5 is the preset brightness.5. Press and hold down the button.6. Press the button to go back to STANDBY mode.F. PBX NumberThis unit enables you to preset the PBX number (such as an 8 or 9) while you are using aswitchboard system.1. Press the button.2. Press the TELEPHONE KEYPAD button.mno 6menuvoice mailmenuvoice mailredialsave/pauseeditflashjkl 5menuvoice mailmenuvoice mailredialsave/pausedef 3abc 21editflashghi 4menuvoice mailmenuvoice mailredialsave/pauseCaller ID System Operation
273. Press the button.4. Press the SCROLL UP or DOWN button. (OFF is the preset PBX number.)PBX MODE OFF - set for direct line access.5. Press and hold down the button.6. Press the button to go back to STANDBY mode.NOTE:When placing a call by using the DIAL 7 , or the DIAL 10 , or theDIAL1+ button, this telephone will automatically add the PBX number and apause time before the dialed telephone numbers.G. Flash TimeThis unit enables you to select the standard FLASH TIME applicable to your calling area. Ifyou are not sure of the FLASH TIME you are using, call your local telephone company.1. Press the button.2. Press the TELEPHONE KEYPAD button.3. Press the button.4. Press the SCROLLUP or DOWN button to select the FLASH TIME. You canalso set the FLASH TIME by entering the FLASH TIME number using the TELEPHONEKEYPAD ~ buttons. The preset FLASH TIME is 600 milliseconds.5. Press and hold down the button.6. Press the button to go back to STANDBY mode.H. Pause TimeThis unit enables you to adjust the PAUSE TIME when placing a call using a switchboardsystem or dialing long distance calls.1. Press the button.2. Press the TELEPHONE KEYPAD button.3. Press the button.4. Press the SCROLL UP or DOWN button to adjust the pausing time. Thepreset pause time is 4 seconds.5. Press and hold down the button.6. Press the button to return to STANDBY mode.menuvoice mailredialsave/pauseeditflashtuv 8menuvoice mailmenuvoice mailredialsave/pausewxyz 9editflashpqrs 7menuvoice mail#1+*7menuvoice mailredialsave/pauseeditflashCaller ID System Operation
28I. Voice MailThis telephone enables you to store the Voice Mail Access Code number in your area. Thiswill automatically connect you to the Voice Mail service provider with one-touch dialing.1. Press the button.2. Press the TELEPHONE KEYPAD button.3. Press the button.4. Enter the Voice Mail Post Code number by using the TELEPHONE KEYPAD ~buttons.5. Press and hold down the button.6. Press the button to go back to STANDBY mode.J. MSG Waiting (Message Waiting)To turn off the Message Waiting LCD Screen indicator.1. Press the button.2. Press the TELEPHONE KEYPAD button.3. Press the button.4. Press the SCROLL UP or DOWN button.5. Press and hold down the button.6. Press the button to go back to STANDBY mode.IMPORTANT: The Message Waiting LCD indicator will automatically turn ON, if you havesubscribed to Voice Mail message service and if you have Visual MessageIndication from your local telephone company.menuvoice mailredialsave/pauseeditflashmenuvoice mailmenuvoice mailredialsave/pausewxyz 9editflashwxyz 9menuvoice mailCaller ID System OperationIMPORTANTIn order to utilize the Caller ID feature, you mustsubscribe to Caller ID service from your localtelephone company.
29K. Handset RegistrationThe multiple-handset feature allows up to 90 handsets to link to the BASE UNIT. Each newHANDSET has to register into the BASE UNIT to get a 2-digit extension number from 10 to99.1. Press the button.2. Press the TELEPHONE KEYPAD button.3. The “EXT REG” will appear on the LCD Screen.4. Press the button.5. Use the TELEPHONE KEYPAD ~ buttons to enter the name of theextension phone user.6. Press the SCROLL DOWN button.7. Enter the 2-digit extension number by using the TELEPHONE KEYPAD ~buttons.8. Press and hold down the button.9. While the “REGISTERING” displaying on the LCD Screen, press and hold down thebutton on the BASE unit. Release the button until the “EXT REG. ”appears on the LCD Screen.10. Press the button to go back to STANDBY mode.IMPORTANT:If the unit you purchased is a one-handset package, we suggest that youassign your new HANDSET with the extension number (10).If the unit you purchased is with two or more handsets, after charging theHANDSETS, you should do the registration to assign different extensionnumber to each HANDSET.NOTE: The ADDITIONAL HANDSET (HCB704) is available through:U.S. Electronics Service Center105 Madison AvenueNew York, NY 100161-800-825-5208Do the handset registration to assign a new extension number once you get the newADDITIONAL HANDSETS.menuvoice mailpagepageredialsave/pausewxyz 9wxyz 9editflash*7menuvoice mailCaller ID System Operation

Navigation menu