CIDMATE Technology XG21501 2.4 GHz Analog Cordless Phone User Manual XG2150 IB 0225
CIDMATE International Technology Inc. 2.4 GHz Analog Cordless Phone XG2150 IB 0225
Contents
- 1. user manual 1
- 2. user manual 2
- 3. user manual 3
user manual 3
OWNER’S MANUAL INSTALLATION AND OPERATING INSTRUCTIONS Model XG2150 2.4 GHz CORDLESS CALLER ID TELEPHONE WITH CALL WAITING 40 CHANNEL AUTOSCAN PLEASE READ THIS MANUAL CAREFULLY BEFORE USE. KEEP FOR YOUR REFERENCE. or installation information, please see “Getting Started” instructions on page 5 or your separate Quick Start Guide. Visit Us on the Web: www.uselectronics.info © 2003 XXXX Corporation STOP Make certain you receive the best performance from your telephone. Read this manual first. Visit Us on the Web: www.uselectronics.info Made in China CM 03-09 Special Features Congratulations on your selection of a quality XXXX product. With proper care, and by following the set-up and user instructions in this Owner’s Manual, this unit will provide you with years of trouble-free service. XXXX is committed to providing quality products that fit your needs. We would like to have any comments or suggestions you might have on this product. You may mail your comments to: U.S. Electronics 105 Madison Avenue New York, NY 10016 When examining your new XXXX cordless telephone, you will find an array of special features including: Filtered SoundTM Syst m - Gets considerably less noise than conventional cordless telephones because of a special circuit which delivers the clearest possible reception. DELETE 40 Channel Auto Scan - Press the SCAN button on the HANDSET to find and lock on to the clearest channel for any call. Desk or Wall Mount - Use this equipment as a desk phone or as a wall phone. TONE or PULSE Dialing - Use this phone for either TONE (push-button) or PULSE (rotary) dialing. Automated Functions - Redial the last number called and automatic STANDBY mode. Security - Ensures greater privacy because a built-in security code with 65,536 combinations prevents use of your telephone line by another nearby cordless phone. Dependable Battery - Recharge your BATTERY PACK many times with the built-in charger. The battery low warning tone tells you when the BATTERY PACK needs recharging. (See page 29.) Special Services - Use the FLASH button to access special services such as Call Waiting supplied by your telephone company or company switchboard. STANDBY Mode - When in STANDBYmode (ON-HOOK), the phone is capable of receiving a call. When the HANDSET is on the BASE UNIT, it is automatically in the STANDBY mode (ONHOOK). When the HANDSET is taken off the BASE UNIT, it remains in the STANDBY mode until you activate the TALK button. Battery Power Saver - Once fully charged, in STANDBY mode, the HANDSET can receive/send calls for a maximum of five days without the need for recharging. Length of charge depends on frequency of use. Luminous LCD Screen - The LCD Screen emits light for 5 seconds every time you press any of the buttons on the HANDSET. HANDSET Ringer Level - Select the ringer volume level (HI, LOW, OFF). HANDSET VOLUME CONTROL Switch - Select the receiver volume level (HI, MID, LOW). HEADSET JACK -Your telephone can utilize a headset for hands-free communication. BELT CLIP - Use the BELT CLIP to hang your HANDSET on your belt. Special Features CALLER ID SYSTEM Multi-Function Large LCD Screen - Shows the number you are dialing, and with Caller ID service (available through subscription from your local telephone company), displays information about the caller before you answer the call. Name and Number DIRECTORY - Stores up to 40 names and numbers so that you can call them with a single key stroke. Caller List - Available with Caller ID service. Stores up to 80 calls to keep track of everyone who called. The name, phone number, time, and date of the call are recorded. Allows you toreturn their calls with a single key stroke. Preferred Calls -You can mark the name and number of a welcome caller in the DIRECTORY. When that number calls in, the caller’s name will appear on the LCD Screen and a special ring sound will be heard. Blocked Calls - You can mark the name and number of an unwelcome caller in the DIRECTORY. When that number calls in, the caller’s name will appear on the LCD Screen and the ringer will be disabled. Repeat Call Indicator - Shows if a new incoming call has called more than once. Out of Area Call Indicator - Advises you that the incoming call is not in a Caller ID service area, or does not support the Caller ID system. Private Call Indicator - Advises you that the caller’s name and/or telephone number of the incoming call is blocked by the system. Call Waiting Service - Displays the name and number of the second caller, if you have subscribed to call waiting service from your local telephone company (See page 15). Voice Mail - Indicates message waiting signal if you subscribed to Voice Mail message service and requested Visual Message Indication from your local telephone company (see page 15). This telephone also detects a Stutter Dial Tone signal every time there is a Voice Mail message for your Voice Mail message provider if you have subscribed to Voice Mail message service. HANDSET Controls 1. HANDSET ANTENNA 10. NEW CALL/MESSAGE WAITING INDICATOR Pg. 14 2. LCD SCREEN 3. REDIAL/PAUSE/SAVE BUTTON Pg. 13, 16~20, 23~26 11. DIR BUTTON Pg. 16~21, 27 4. SCROLL UP-DOWN/ SHIFT LEFT-RIGHT BUTTON Pg. 14, 16~27 12. FUNCTION/VOICE MAIL BUTTON Pg. 15, 22~26 13. HEADSET JACK Pg. 13 5. VOLUME CONTROL (HI, MID, LOW) SWITCH 14. DELETE/SCAN BUTTON Pg. 16, 17, 19~21, 27~28, 31, 38 6. TALK BUTTON Pg. 6, 7, 11~13, 15~16, 20, 21, 31 15. TELEPHONE KEYPAD Pg. 16, 18~20, 22~27 7. DIAL 10 BUTTON Pg. 12, 16, 20~21, 25 16. DIAL 1+/# BUTTON Pg. 12, 16, 19~21, 25 8. DIAL 7/TEMPORARY TONE(*) BUTTON Pg. 12, 16, 19~21, 25 17. EDIT BUTTON Pg. 16, 18~20, 23~27 9. FLASH BUTTON Pg. 15 18. CHARGE CONTACTS HANDSET Controls 1. HANDSET ANTENNA 2. LCD Screen: Shows call information, phone status, prompts and directory items. 3. SAVE/RE(REDIAL)/PA(PAUSE) RE/PA SAVE Button: (SAVE) Press and hold down to save the changes on the listed items. (REDIAL) Press to redial the last number you dialed. (PAUSE) Press to insert a pause while dialing. (You will need the which use an alternative Long Distance Access Code.) RE/PA SAVE button to dial numbers HANDSET Controls 4. SCROLL UP-DOWN, SHIFT LEFT-RIGHT large LCD Screen. Button: Press to move around the 5. HANDSET VOLUME CONTROL (HI, MID, LOW) Switch: Select the receiver volume level (HI, MID, LOW). 6. TALK TALK Button: Press to answer an incoming call or to place a call. Press to end a call. 7. DIAL 10/0 Code. Button: (DIAL 10) Press and hold down to place a local call with Area 8. DIAL 7/TEMPORARYTONE Button: (DIAL7) Press and hold down to place a local call. (*) Press to temporarily change the Dialing mode from Pulse to Tone for Rotary Service Users. (Press once before entering numbers to access the answering system or electronic banking service, etc.) 9. FLASH FLASH Button: Press to answer a call if you have Call Waiting. 10. NEW CALL/MSG (MESSAGE) WAITING LED Indicator: Blinks when recording a new incoming call or when receiving a Message Waiting signal, if you have subscribed to a Voice Mail message service from your local telephone company. (See page 14 for details.) 11. DIR (DIRECTORY) DIR Button: Press to access names and numbers stored in the DIRECTORY. (See pages 16 to 21 for details.) FUNC 12. FUNC (FUNCTION)/VOICE MAIL VOICE MAIL Button: (FUNCTION) Press and hold to access special functions operation in STANDBY mode. (For special functions see page 22.) (VOICE MAIL) - Press to automatically dial the Voice Mail Post Code in your area to access your Voice Mail message. 13. HEADSET JACK: For connecting your headset plug to enjoy hands-free communication. (See page 13 for detail.) DELETE 14. DELETE/SCAN SCAN Button: (DELETE) Press and hold down to delete items or individual characters. (SCAN) Press to change the operating channel when you hear interference. 15. TELEPHONE KEYPAD ~ WXY 9 Buttons: Allows you to make a call depending on pressed button. (For TELEPHONE KEYPAD characters, see page 27 .) 1+ # Button: (DIAL 1+) Press and hold down to place a long distance call. 16. DIAL 1+/# (Automatically adds the number 1 at the beginning of the displayed telephone number.) 17. EDIT EDIT Button: Press to edit listed items. 18. CHARGE CONTACTS: For charging the BATTERY PACK inside the HANDSET. We recommend cleaning the CHARGE CONTACTS periodically with a damp cloth. BASE UNIT Controls 1. TONE/PULSE SELECT SWITCH Pg. 6, 31 2. TELEPHONE LINE CONNECTION JACK Pg. 5, 9, 11, 31 3. POWER-IN CONNECTION JACK Pg. 5 4. BASE UNIT ANTENNA 5. CHARGE/IN USE LED INDICATOR Pg. 11~13 6. PAGE BUTTON 7. CHARGE TERMINALS BASE UNIT Controls 1. TONE/PULSE Select Switch 2. TELEPHONE LINE CONNECTION JACK 3. POWER-IN CONNECTION JACK 4. ANTENNA 5. IN USE/CHARGE LED Indicator: (IN USE) Lights up to indicate that the HANDSET is in TALK mode. (CHARGE) Lights up when the HANDSET is placed on the BASE UNIT for charging. 6. PAGE PAGE Button: Press to page the HANDSET. 7. CHARGE TERMINALS: For charging the HANDSET BATTERY PACK. For best performance, clean the CHARGE TERMINALS periodically with a damp cloth. IMPORTANT Placing your BASE UNIT near appliances such as televisions, refrigerators, radios, or microwave ovens may cause interference.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2003:02:27 15:45:07Z Modify Date : 2003:03:19 14:34:48+08:00 Page Count : 8 Creation Date : 2003:02:27 15:45:07Z Author : 鄧伶 Producer : Acrobat PDFWriter 5.0 for Windows Mod Date : 2003:03:19 14:34:48+08:00 Metadata Date : 2003:03:19 14:34:48+08:00 Title : XG2150 IB 0225.qxd Creator : 鄧伶 Has XFA : NoEXIF Metadata provided by EXIF.tools