CIG WF610 WF-610 2x2 dual band 802.11ac Outdoor AP User Manual SFK WF610 2015 08 26

Download:
Mirror Download [FCC.gov]
Document ID	2726835
Application ID	NXdGkWrH6gcLK97ZPn2NQg==
Document Description	SFK-WF610_User Manual_2015.08.26
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	271.69kB (3396088 bits)
Date Submitted	2015-08-26 00:00:00
Date Available	2015-08-31 00:00:00
Creation Date	2015-08-26 10:24:21
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2015-08-26 10:24:21
Document Title	SFK-WF610_User Manual_2015.08.26
Document Creator	Microsoft® Office Word 2007
Document Author:	wifi123

WF-610User Manual
Version 2
TABLE OF CONTENTS
1
Quick Start ................................................................................................................... 4
1.1
Connect PoE Adapter to WF-610............................................................................................ 12
1.2
Configure PC’s IP Address...................................................................................................... 13
1.3
Visit WF-610 Web Page .......................................................................................................... 13
1.4
Configure Management Interface for WF-610 ........................................................................ 14
1.5
Connect WF-610 to Switch...................................................................................................... 14
1.6
Configure Location, Language ................................................................................................ 15
1.7
Configure Security Profile for Different Authentication Types................................................. 15
1.7.1 WEP ................................................................................................................................................. 15
1.7.2
WPA2-PSK ..................................................................................................................................... 16
1.7.3
WPA/WPA2-PSK ........................................................................................................................... 16
1.7.4
802.1X /EAP ................................................................................................................................... 16
1.7.5
WEB/MAC ....................................................................................................................................... 17
AP Mode .................................................................................................................... 19
2.1
AP Network Topology .............................................................................................................. 19
2.2
Enable AP Mode...................................................................................................................... 19
2.3
Configure Radio Parameters ................................................................................................... 20
2.4
Configure SSID........................................................................................................................ 20
2.5
Configure Rate Limit Rule (Optional) ...................................................................................... 21
2.6
Configure Group ID (Optional) ................................................................................................ 21
2.7
Configure MAC ACL Rule (Optional) ...................................................................................... 23
2.8
AP+WDS ................................................................................................................................. 23
2.8.1
AP+WDS Network Topology ........................................................................................................ 23
2.8.2
Enable WDS function .................................................................................................................... 23
2.8.3
Configure CPE WDS ..................................................................................................................... 24
WDS Bridge Mode ..................................................................................................... 25
3.1
WDS Bridge Network Topology .............................................................................................. 25
3.2
Enable WDS Bridge Mode ...................................................................................................... 25
3.3
Input Remote AP MAC ............................................................................................................ 25
3.4
Configuration on Remote AP................................................................................................... 26
3.5
NAWDS Auto Find ................................................................................................................... 26
Status......................................................................................................................... 27
4.1
Overview .................................................................................................................................. 27
4.2
Radio ....................................................................................................................................... 28
Management .............................................................................................................. 29
5.1
Backup/Import Configuration ................................................................................................... 29
5.2
Software Upgrade.................................................................................................................... 29
5.3
Factory Reset via WEB ........................................................................................................... 29
5.4
Reboot via WEB ...................................................................................................................... 30
5.5
Factory Reset via Sending Special Packet ............................................................................. 30
5.5.1 Factory Reset One Single Device ............................................................................................... 30
5.5.2
Factory Reset All Devices ............................................................................................................ 33
Troubleshooting ......................................................................................................... 34
6.1
6.2
6.3
6.4
Ping Diagnose ......................................................................................................................... 34
TraceRT Diagnose .................................................................................................................. 34
LED Definition .......................................................................................................................... 35
Debug via Telnet ..................................................................................................................... 35
1 Quick Start
Thank you for buying this product. The following information aims to give you general
information about product introduction, product overview and installation procedure and so
on.
1. Introduction
WF-610 is a dual-band 2x2 outdoor Wi-Fi AP, which is complied with the
IEEE802.11n/11ac standard and designed for high-density deployments in offices,
schools, hospitals and hotels that require premium performance.
Having together MIMO (Multiple-in&Multiple-out) technology with high-throughput mode
techniques, WF-610 works with most wireless terminals to builds a high capacity Wi-Fi
network.
2. Package List
•
•
•
•
AP x1
L shaped clamp x 1
Waterproof coverx 1
Installation packagex 1
3. Product Overview
No.
Name
Function
LAN Port
10/100/1000M Base-T Ethernet port (RJ-45), used as a
WAN port and used for being powered by PoE
function.
See LED Definition
LEDs
4. Installation
To reduce the risk of bodily injury, electrical shock, fire, and equipment damage, read all
warnings and precautions in this guide before installing or maintaining product.
Caution
To avoid risk of injury from electrical shock or energy hazard, installation and service
of this product must be performed by qualified service personnel.
Make sure the AP fits securely on the ceiling rail when hanging the device in the
ceiling, because poor installation could cause it to fall and make body injury and
equipment damage.
Safety Statement
•
To avoid the abnormal work, do not install the device near the power line, electric
lamp, power grid, or in any forceful power grid place
•
Ensure the power adapter is grounded well if install the device indoor.
•
Install other lightning protection equipment near the device if necessary, because
the lightning protection module inside the device is basic.
•
Use the steady power grid to provide the power to the device, which is to avoid the
abnormal work.
•
Use a less than 50m network cable to connect the PoE port, which is to acquire the
steady power. The network cable complies with the DC resistance definition in the
YD/926.2 protocol.
Installation Environment
•
Operating ambient temperature: -40℃ ~ +65℃
•
Operating ambient humidity: 5% ~ 95%non-condensing
Installation mode:
•
Pole mounting
Installation tool:
•
Screws, screw-driver and wrench
Installation site:
•
Please ensure the visibility ofproduct and no tall buildings and woods block
between them.
Installation procedure
Pole mounting
1.
Firstly install the L shaped clamp, with M6 screw nut, spring washer and flat washer. Four
screws need be installed.
2.
Put the U shaped screw stem and U shaped slot into the hole. And then drive the M6 crew nut
and M6 washer.
3. Install the clamp on the back of WF-610, with M6*12 screw bolt, M6 spring washer and M6 flat
washer. Four screw bolts need be installed.
4. Input M6*12 screw bolt and M6 washer into the hole on the back and drive them.
5. Finall
y mount WF610 on the
pole as
shown in the
picture. And
drive the
screw nut
tight with
wrench.
5. LED Definition
LED
RUN
LAN
Function
State-Color
AP power / ready Steady - Green
status
Red
Off
Network Link Status Steady - Green
Steady- Yellow
Flashing
Off
5G Hz Radio Status
Steady– Green
Off
2.4G
Hz
Radio Steady– Green
Status
Off
Indication
APis ready
AP hardware failure
No power to AP
1000Mbps
Ethernet
negotiated
10/100Mbps Ethernet
negotiated
Ethernet link activity
Ethernet link unavailable
5GHz radio is enabled
5GHz radio is disabled
5GHz radio is enabled
5GHz radio is disabled
link
link
6. Software Installation
Logging in to the Web Page
1. To configure PC IP address, fill 192.168.188.x in “IP address” and 255.255.255.0 in “Subnet
mask”(set Window7 as an example to show the properties)
2. Input the default IP address 192.168.188.251 in the address bar of the web browser and press
Enter.
3. Enter username and password (username: admin, password: password), after password
authentication is successful, the web page is displayed.
7. Product Specification
Physical specification
Dimensions
216.2mm x 216.2 mm x 71mm(L x W x H)
Weight
3.0kg
LED
RUN/ LAN/ RADIO 0/ RADIO 1
Ethernet interface
RJ-45 connector
Electrical specification
Power input
Power consumption
Standard 802.3at PoE
≤12.33W
Environmental specification
Working temperature
-40℃ ~ +65℃
Working humidity
5% ~ 95% non-condensing
Elevations
86kPa～106kP0061
Dustproof and
waterproof
Lightning protection
IP67
6KV common mode surge
8. Product Proper Disposal
Waste of Electrical and Electronic Equipment
Directive 2002/96EC on Waste of Electrical and Electronic Equipment are designed
to tackle the fast increasing waste stream of electrical and electronic equipment and
complements European Union measures on landfill and incineration of waste. CIG
products at end of life are subject to separate collection and treatment in the EU Member
Statues and therefore are marked with the symbol.
European Union RoHS
EU Restriction and Hazardous Substances Directive 2011/65/EC (RoHS) restricts
the use of specific hazardous materials in manufacture of electrical and electronic
equipment. Specially, restricted materials are Lead, Cadmium, Mercury, Hexavalent
Chromium, and Bromine. CIG products comply with this requirement and all marked with
“RoHS” shown at the left.
China RoHS
WF-610complies with China environmental declaration requirements and is labeled with
“EFUP 20” label shown as follows.
部件名称
（Parts）
电路模块
（circuit
modules）
电缆及电缆组件
（Mechanicalass
emblies）
金属部件
（Metal Parts）
塑料和聚合物部
件
有毒有害物质声明
Hazardous Materials Declaration
有毒有害物质或元素（Hazardous Substance）
铅
汞
镉
（Pb）
（Hg）
（Cd）
（Cr6+）
（PBB）
（PBDE）
×
六价铬
多溴联苯
多溴二苯醚
（Plastic and
Polymeric
Parts）
O：
表示该有毒有害物质在该部件所有均质材料中的含量在 SJ/T11363 － 2006
标准规定的限量要求下。
Indicates that the concentration of the hazardous substance in all
homogeneous materials in the parts is below the relevant threshold of the
SJ/T11363-2006 standard.
X：
表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T113632006标准规定的限量要求。
Indicates that the concentration of the hazardous substance of at least one
of all homogeneous materials in the parts is above the relevant threshold of
the SJ/T11363-2006 standard.
对销售之日的所售产品，本表显示剑桥公司供应链的电子信息产品可能包含这
些物质。注意：在所售产品中可能会也可能不会含有所有所列的部件。
This table shows where these substances may be found in the supply chain
of CIG electronic information products, as of the date of sale of the enclosed
product. Note that some of the component types listed above may or may
not be a part of the enclosed product.
除非另外特别的标注，此标志为针对所涉及产品的环保使用期标志。某
些零部件会有一个不同的环保使用期贴在其产品上。此环保使用期限只适用
于产品是在产品手册中规定的条件下工作。
The Environment-Friendly Use Period (EFUP) for all enclosed products
and their parts are per the symbol shown here, unless otherwise marked.
Certain parts may have a different EFUPand so are marked to reflect
such. The Environment-Friendly Use Period is valid only when the product
is operated under the conditions defined in the product manual.
9. Safety and Regulatory compliance
WF-610has been tested and complied with the standards as follows:
•
•
•
FCC DOC Part 15 Class B (US)
FCC Part 15 Subpart C 15.247 (US)
FCC Part 15 Subpart E 15.407 (US)
10. FAQs
FAQ
Solution
Check that the power adapter is plugged into a
The RUN indicator is off live AC outlet.
Check the power cable for shorts or breaks.
10
FAQ
The LAN port
indicator is off.
Solution
Check whether the connection between the
LAN/POE port of the combiner and the
LAN/POE port is correct.
Check whether the connection between the
LAN/POE port of the combiner and the
LAN/POE port is correct.
11. Technical Support
CIG offers technical support 24 hours a day, 7 days a week. Use one of the following
methods to contact CIG technical assistance center:
Hotline:
+86 21 8023 300
Email:
support@cambridgeig.com
12. Contact Information
Hong Kong
25th Floor, Jar dine House, 1 Connaught Place
Hong Kong, PRC
Phone: +852 2827 1778
Shanghai
5F, 8Building
2388Chen Hang Road
Shanghai 201114, China
Phone: +86 21 8023 300
USA
Cambridge Industries Group
Techmart Center 5201 Great
AmericaParkway, Suite 320
Santa Clara CA 95054.
Tel: +1 408.730.6888
11
13. Legal declaration
CIG name, CIG logo, and all CIG product names are trademarks of Cambridge Industries
Group Co. Ltd (CIG). All other brand and product names are claimed as property of others
respective holders. Specifications, products, and products names are subject to change
without notice. Copyright
This document may not be reproduced in whole or in part without the express written
permission of CIG. This document contains confidential, proprietary information belonging
to CIG, and may not be used or disclosed except in accordance with applicable
agreements.
Performance figures and data quoted in this document are typical and must be specifically
confirmed by CIG before they become applicable to any particular order or contract. The
company reserves the right to make alterations or amendments to the detailed
specification at its discretion.
Copyright© 2014, Cambridge Industries Group Co. Ltdconfidential, All rights reserved.
1.1 Connect PoE Adapter to WF-610
Notes: Now WF-610 can be powered by standard 802.3af or 802.3at PoE PSE.Please connect the
Ethernet Port labeled “PWR LAN-OUT” on PoE Adapter to “ETH” port of WF-610and the Ethernet Port
labeled “LAN-IN” on PoE Adapter to your PC or Switch.
12
1.2 Configure PC’s IP Address
Notes: Connect your PC to the “LAN-IN” port on PoE Adapter of WF-610, manually configure your
wired NIC with a static IP address on the 192.168.188.x subnet (e.g. 192.168.188.202).
1.3 Visit WF-610 Web Page
Notes: Input the default IP address “192.168.188.251”in the address bar of browser. Then enter the
13
default username and password (username: admin, password: password) to enter the Web interface
of AP.
1.4 Configure Management Interface for WF-610
Notes: You can configure management IP/subnetmask/gateway/DNS here. By default, packets are
sent without tag. Packets can be sent with tag by selecting the option as shown in the figure.
1.5 Connect WF-610 to Switch
Notes: Connect WF-610 to Switch and confirm it can visit Internet, then configure your PC to the
same subnet and connect to the same Switch in order to continue to configure the WF-610.
14
1.6 Configure Location, Language
Notes:The country code is US and can’t be modified.
1.7 Configure Security Profile for Different Authentication Types
1.7.1 WEP
WEP-OPEN:
15
WEP-Shared Key:
1.7.2 WPA2-PSK
Notes: With parameter “Encryption”, you can select AES, TKIP or AES/TKIP.
1.7.3 WPA/WPA2-PSK
Notes: With parameter “Encryption”, you can select AES, TKIP or AES/TKIP.
1.7.4 802.1X /EAP
If want to use the 802.1x authentication, it need to configure the Radius profile firstly. Then
in the security profile, the radius profile will be cited by security profile.
16
Notes:Security type can be WPA2 or WPA/WPA2.
1.7.5 WEB/MAC
WF-610 supports Web/MAC authentication. If you want to use the Web/MAC
authentication, it needs to configure the Portal profile and Radius profile firstly. Then in the
security profile, the Portal profile and Radius profile will be cited.Above all, you need to
setup a portal server and radius server.
Notes: MAC and WEB authentication have the same configuration. Afterreceiving auth request from
station, WF-610 will firstly start MAC auth. If MAC auth is failed, WF-610 will change to WEB auth.
17
Notes: Wall garden can be configured by inputting custom domain or IP. User can visit these
domains or IP listed in wall garden before authentication. For those domains or IP not contained in
wall garden, they can be visited only after authentication.
18
2 AP Mode
2.1 AP Network Topology
2.2 Enable AP Mode
19
2.3 Configure Radio Parameters
2.4 Configure SSID
20
Notes:
1. You may apply the Security, Rate Limit or MAC ACL profiles which have been configured. After the
above setting, wireless stations can connect to the SSID of AP and get IP address from DHCP server
to visit Internet.
2. VLAN mode and PVID used for Ethernet traffic can be configured here.
2.5 Configure Rate Limit Rule (Optional)
Notes: Rate Limit profile will be applied in the SSID configuration.
2.6 Configure Group ID (Optional)
Notes: Group profile is used for 802.1x/Web/MAC authentication. Group is classifiedby Filter-ID
attribute in radius access accept message. The Group is bound with the role of the user. Different
group has different VLAN and rate limit configuration. When a station sends the username and
password to the Radius server for authentication, the server can respond with a Filter-ID (optional) to
the AP. After getting the Filter-ID attribute, AP will search the Filter-ID in the Group profiles. If the
21
Filter-ID can be matched with one profile, the traffic VLAN and rate limit will be applied to the station.
The Group profile is applied in the Radius server profile.
22
2.7 Configure MAC ACL Rule (Optional)
2.8 AP+WDS
WF-610 also supports AP+WDS mode.
2.8.1 AP+WDS Network Topology
2.8.2 Enable WDS function
23
Note: Enable WDS function when you configure SSID.
2.8.3 Configure CPE WDS
Note: Enable WDS function too when you configure CPE to connect to AP.
24
3 WDS Bridge Mode
3.1 WDS Bridge Network Topology
3.2 Enable WDS Bridge Mode
Note: Please select a specified Channel (for example 161) here.
3.3 Input Remote AP MAC
25
Note:Security profile can be cited here, but only WEP auth and OPEN are supported for WDS bridge
mode.
3.4 Configuration on Remote AP
Note: Please select the same channel. For the WDS bridge mode, two APs should use the same
channel and security encryption.
Note: Please input the MAC address of AP which you want to connect via WDS.
3.5 NAWDS Auto Find
WF-610 also supports “NAWDS Auto Find” function. Input the MAC address of the slave
AP on the master AP. Then enable “NAWDS Auto Find” function in slave AP without
inputting the MAC address.
Slave AP configuration:
26
Notes: Please select the same Channel as that of AP which you want to connect via WDS.
Notes: After you enable “NAWDS Auto Find” function, the AP will connect to the master AP via WDS
automatically.
4 Status
4.1 Overview
You can check some summary info here, for example, software version, ip interface and
radio configuration.
27
4.2 Radio
In this page, you can see service mode for radio 2.4G is AP mode. There is only one SSID
“2g_ssid1” with BSSID 00:00:11:11:11:10 and totally two stations are connected to this
radio. Information will be updated by clicking “Refresh” button. For radio 5G, you can open
“status”-“Radio 5G” to check detailed information.
Something to mentioned, detailed information about station (e.g. auth type/MAC/online
time/TX bytes/RX bytes) exists in “station list”.
28
5 Management
5.1 Backup/Import Configuration
Notes: Press “Save” button to save current configuration. If you want to import one new
configuration file, please click “choose file” to select the new file and then press “Upload” button to
upload. After that, WF-610 will reboot.
5.2 Software Upgrade
Notes: Press “Choose File” button to select firmware file that you want to upgrade, then press
“Upgrade” button to upgrade.
5.3 Factory Reset via WEB
Click “Restore” button to do factory reset. All of the configuration will be restored to default.
29
5.4 Reboot via WEB
5.5 Factory Reset via Sending Special Packet
WF-610 has no reset button. If you forget WF-610’s IP, you can use a simple tool—
anysendtcpip to execute factory reset via sending special packet. After that, you can telnet
WF-610 with default IP 192.168.188.251.
5.5.1 Factory Reset One Single Device
Open file folder.
30
Double click anysend.exe.
Click the yellow icon located top left corner，and select .
31
Select right network card which is used to send packet.
Modify the MAC address marked in red to beWF-610’s MAC with which you want to do
factory reset.
32
Click the yellow icon located top right corner, then it will start to send special broadcast
packet. After devices receive the packet, they will check if it matches with their own
MAC. If it does, device will execute factory reset. If not, device will do nothing.
5.5.2 Factory Reset All Devices
Select and open .
Here you can see one special default MAC address marked in red color whichis
00:01:02:03:04:05. You don’t need to modify it. Select the right network card and click
the yellow icon to send packet. After devices receive the packet, they won’t check if it
matches with their own MAC, and directly execute factory reset.
33
6 Troubleshooting
6.1 Ping Diagnose
6.2 TraceRT Diagnose
34
6.3 LED Definition
LEDs are defined as follows:
Label
Function
LED mode
RUN
AP power / ready Off
status
Red
On - Green
LAN
Ethernet Network Off
Link
Status
/ On - Yellow
Activity
On - Green
(HW Control)
Flashing
5G Radio
5G Hz Radio Status Off
On – Green
2.4G Radio
2.4G Hz Radio Off
Status
On – Green
6.4 Debug via Telnet
You can debug WF-610 via Telnet.
Username: admin
Password: password
35
Status
No power to AP
Device hardware failure
Device ready
Ethernet link unavailable
Link speed 10/100M
Link speed 1G
Ethernet activity
5G Hz radio disabled
5G Hz radio enabled
2.4G Hz radio disabled
2.4G Hz radio enabled
Federal Communications Commission (FCC) Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
 Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
RF exposure warning
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment must be installed and operated in accordance with provided instructions and the
antenna(s) used for this transmitter must be installed to provide a separation distance of at least 118.97
cm from all persons and must not be collocated or operating in conjunction with any other antenna or
transmitter.
36

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 36
Language                        : zh-CN
Tagged PDF                      : Yes
Author                          : wifi123
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2015:08:26 10:24:21
Modify Date                     : 2015:08:26 10:24:21
Producer                        : Microsoft® Office Word 2007

EXIF Metadata provided by EXIF.tools