CIXI LEONLUX TECHNOLOGY CO LN0710 LED Flood lights User Manual

CIXI LEONLUX TECHNOLOGY CO .,LTD LED Flood lights

User manual

1Instruction Manual Attention: Please read the following instructions carefully to ensure that mounting operation will be carried out in the right way .These instructions should be properly preserved for future reference. One side The other side Main construction Data: 1200V~, 60Hz; IP54, Class I, LED Model: Rated Power: Weight: Dimensions: 99A50-XXX Max 2 x 50W 2.97kg 220x175x330mm 99A20-XXX Max 2 x 20W 1.45kg 185x190x280mm Before Installation; Take the parts carefully out of the packaging. Make sure, before using the lighting system that this has not been damaged during transportation. The lighting system must not be operated if there is damage to cable or the electrical parts are damaged. Each faulty fuse has to be replaced. Repairs must be done by a specialist electrician. Keep packaging materials well away from children and pets. Danger of suffocation! SAFETY INSTRUCTIONS 1. The work light is IP54 and IK08 rated, to be suitable for indoor &outdoor use. 2. Ensure that the lamp is stable and it has a firm footing. Ensure that the cable is not touching any sharp objects and the main plug connector is adequately protected against rain or moisture. 3. The lamp has been equipped with 5m H07RN-F 3Gx1.50mm² cable + VDE plug. Then it can work after you connect with the power and be controlled by the switch. 4. The lamp must be earthed. 5. 2pcs of 230V output socket (IP54) on the backside of lamp. The socket is convenient to be linkable with other electrical appliance for working. Warning: the output electricity summation of socket must be less than 1500W. 6. Before mounting and maintenance, please ensure that the electrical supply has been switched off to avoid any electric shock. Warning: the maintaining shall be operated by the qualified electrician. 7. If the external flexible cable or cord of this luminaire is damaged, it must be exclusively replaced by the manufacturer or a qualified electrician in order to avoid a hazard. 8. The lamp can be foldable / opened out to 290 degree, for 2 lighting faces..
2 Stand for Work Light A tripod is available for the 2 x 50W work light and can be connected as shown: Safety and warning notes: Do not look directly into the LED – especially for longer periods of time – without protecting your eyes. A LED beam should not be directed into other people’s eyes. Operation is strictly forbidden if there is damage to the lights, plugs or the supply line. Never make your own repairs to faulty parts. Repairs must be done by trained specialists. Do not leave children unattended in the area of the lights or other electrical appliances. Never expose the lights to a direct jet of water (garden hose, for example) and never immerse the lights into water or other liquids! Do not expose the lights to extreme heat or exposed flames. The entire product must neither be changed nor converted. Changes made to the lighting set lead to invalidation of the guarantee (warranty). Care and servicing: You must make sure that the power supply is disconnected before cleaning. Use a dry or slightly damp cloth for cleaning. Never use chemicals or abrasives for cleaning. Disposal: Old electronic equipment must be brought to public connection points and must not be disposed of as household waste. Bluetooth Switch on and you will hear DI DI DI, please open the Bluetooth of your device to Connect with the lamp. Then you could play and enjot the music. The name of the worklight is “LED worklight with bluetooth”. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
3 FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. *RF warning for Mobile device: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Navigation menu