CIXI LEONLUX TECHNOLOGY CO LN0710 LED Flood lights User Manual

CIXI LEONLUX TECHNOLOGY CO .,LTD LED Flood lights

User manual

Download: CIXI LEONLUX TECHNOLOGY CO LN0710 LED Flood lights User Manual
Mirror Download [FCC.gov]CIXI LEONLUX TECHNOLOGY CO LN0710 LED Flood lights User Manual
Document ID3934666
Application IDxpUGppMz8XDlq5QxxApJRg==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize17.35kB (216878 bits)
Date Submitted2018-07-23 00:00:00
Date Available2018-07-23 00:00:00
Creation Date2018-07-12 18:04:31
Producing SoftwareAcrobat Distiller 10.1.2 (Windows)
Document Lastmod2018-07-12 18:04:31
Document TitleMicrosoft Word - Manual for 99A50-XXX蓝牙
Document CreatorPScript5.dll Version 5.2.2
Document Author: Administrator

Instruction Manual
Attention: Please read the following instructions carefully to ensure that mounting operation will be
carried out in the right way .These instructions should be properly preserved for future reference.
One side
The other side
Main construction Data:
1200V~, 60Hz; IP54, Class I, LED
Model:
Rated Power:
Weight:
Dimensions:
99A50-XXX
Max 2 x 50W
2.97kg
220x175x330mm
99A20-XXX
Max 2 x 20W
1.45kg
185x190x280mm
Before Installation;
Take the parts carefully out of the packaging.
Make sure, before using the lighting system that this has not been damaged during transportation.
The lighting system must not be operated if there is damage to cable or the electrical parts are damaged.
Each faulty fuse has to be replaced. Repairs must be done by a specialist electrician.
Keep packaging materials well away from children and pets. Danger of suffocation!
SAFETY INSTRUCTIONS
1. The work light is IP54 and IK08 rated, to be suitable for indoor &outdoor use.
2. Ensure that the lamp is stable and it has a firm footing.
Ensure that the cable is not touching any sharp objects
and the main plug connector is adequately protected against rain or moisture.
3. The lamp has been equipped with 5m H07RN-F 3Gx1.50mm² cable + VDE plug.
Then it can work after you connect with the power and be controlled by the switch.
4. The lamp must be earthed.
5. 2pcs of 230V output socket (IP54) on the backside of lamp.
The socket is convenient to be linkable with other electrical appliance for working.
Warning: the output electricity summation of socket must be less than 1500W.
6. Before mounting and maintenance, please ensure that
the electrical supply has been switched off to avoid any electric shock.
Warning: the maintaining shall be operated by the qualified electrician.
7. If the external flexible cable or cord of this luminaire is damaged,
it must be exclusively replaced by the manufacturer or a qualified
electrician in order to avoid a hazard.
8. The lamp can be foldable / opened out to 290 degree, for 2 lighting faces..
Stand for Work Light
A tripod is available for the 2 x 50W work light and can be connected as shown:
Safety and warning notes:
Do not look directly into the LED – especially for longer periods of time – without protecting your eyes.
A LED beam should not be directed into other people’s eyes.
Operation is strictly forbidden if there is damage to the lights, plugs or the supply line.
Never make your own repairs to faulty parts. Repairs must be done by trained specialists.
Do not leave children unattended in the area of the lights or other electrical appliances.
Never expose the lights to a direct jet of water (garden hose, for example) and never immerse the lights into
water or other liquids!
Do not expose the lights to extreme heat or exposed flames.
The entire product must neither be changed nor converted. Changes made to the lighting set lead to
invalidation of the guarantee (warranty).
Care and servicing:
You must make sure that the power supply is disconnected before cleaning.
Use a dry or slightly damp cloth for cleaning.
Never use chemicals or abrasives for cleaning.
Disposal:
Old electronic equipment must be brought to public connection points and must not be disposed of as
household waste.
Bluetooth
Switch on and you will hear DI DI DI, please open the Bluetooth of your device to
Connect with the lamp. Then you could play and enjot the music.
The name of the worklight is “LED worklight with bluetooth”.
This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2018:07:12 18:04:31+08:00
Modify Date                     : 2018:07:12 18:04:31+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 10.1.2 (Windows)
Format                          : application/pdf
Title                           : Microsoft Word - Manual for 99A50-XXX蓝牙
Creator                         : Administrator
Document ID                     : uuid:ae7ef2f0-f068-4a0e-a0c4-4d04142e51b3
Instance ID                     : uuid:d3f917b7-733f-41b8-a4f8-e7259c3b64e3
Page Count                      : 3
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AQJQLN0710

Navigation menu