CLEVER BRIGHT BSEM-12 BLUETOOTH STEREO EARBUDS WITH BUILT-IN MIC User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2523818
Application ID	krZCe5uXwcB3kgrCpvEpCA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.22kB (115302 bits)
Date Submitted	2015-02-05 00:00:00
Date Available	2015-02-05 00:00:00
Creation Date	2015-01-29 13:59:14
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2015-01-29 13:59:14
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

Security precautions
Security precautions: In order to have a proper and safety use of the headset, please read this
user manual in detail and save it.
 Be sure to aware the following guidelines when using your headset.
1. Should adjust volume and time reasonably when using the headset.
2. Please stop using the headset in potentially hazardous situation to ensure your safety.
3. Please avoid suing headset to listen to music, make or receive calls to avoid distraction while
driving.
4. Put this product and its accessories somewhere out of the reach of children, to avoid a fatal
danger caused by inappropriate use.
5. Should keep water from entering the headset during grooming, which may cause damage to
sound quality or headset.
6. Should avoid turning the volume so high that you can’t hear anything around you. If you feel
a tinnitus or the volume is too high, please reduce the volume.
7. Stop using the headset if you feel obvious discomfort, irritation or have other adverse
reactions.
8. The headset should not be stored or use at temperatures below ‐15℃(5℉)or above 55℃
(131℉）which may shorten headset or battery life.
Overview of headset

Overview of I5 Bluetooth stereo headset :
Earpiece
Microphone
Vol (+) Next Track
MF button
Vol (‐)/ Previous Track
LED Indicator
 S2 Bluetooth sports headset in the box :
S2 Bluetooth sports headset 1pc
USB charging cable 1pc
User’s manual 1pc

Charger and battery:
Please check the charging cable is original or not before charging the Bluetooth headset.
Warning:
Must use original charge cable to charge for the Bluetooth headset, otherwise it may damage the
headset. Thus, voltage o f charger must be 5V, electric current exceed 100mA (5V / 100mA).
Hands Free
Charging:
This headset uses a non‐detachable built‐in rechargeable battery. In order to prevent damage of
the headset, please do not remove the battery.
1. Before charging, make sure the headset has been switched off.
2. Plug USB cable into the charging port of headset; plug the other side of USB cable into USB
charger or other charging device. Charging will start and the red light remains bright on the
headset.
3. Charging time of headset takes approximately up to 1.5 – 2 hours, blue light remains bright
or red light switch off after charging completed.
 Pairing mode:
Keep press the MF button until blue and red lights blink alternatively.
 Reconnection mode:
Keep press the MF button until blue light blinks.
 Switch off
Keep press the MF button until red light blinks.
 Pair your headset with your mobile phone:
1. Keep the distance between the headset and mobile phone within 1 meter. The closer, the
better.
2. Keep press the MF button until blue and red lights blink alternatively. , entered to pairing
mode.
3. Initiate Bluetooth function of mobile phone (or other device needed to be connected). Then
“ S2 ” will be shown on your phone.
4. Select “ S2 ” (some mobile phones need you to input PIN “ 0000 ” as password ) and the
headset will automatically connect with your mobile phone.
※Attention : Generally , there are 120 seconds at maximum to pair headset with your
mobile phone, or the headset will power off automatically when the light goes out. Please
retry steps 1 to 4 to pair again if your operation doesn’t work.
 Disconnect the headset with your mobile phone:
Switch off the headset.
Or close the Bluetooth function of your mobile phone.
Or take the headset from the phone to more than 20m ( 60ft ) away.
 Reconnect the paired headset with your mobile phone:
1. Keep distance of the headset and mobile phone with in 1 meter. The closer, the better.
2. Switch on the headset, and ensure the headset enters into reconnection mode when the
blue light blinks.
3. Switch on Bluetooth search function in your mobile phone of other device needed to be
connected. Then the headset will automatically reconnect with the mobile phone which has
connected last time.
 Pair your headset with two mobile phone:
1. Keep distance between the headset and mobile phone 1 ( or other device needed to be
connected ) within 1 meter. The closer, the better.
2. Ensure that the headset enters into pairing mode.
The blue and red lights blink alternatively.
3. Switch on Bluetooth search function of phone 1, then pair headset with phone 1.
4. Turn off the Bluetooth function in your phone 1 and the headset.
5. Restart the headset and ensure the headset enters to pairing mode. Initiate Bluetooth
function in your phone 2 and connect it with the headset.
6. Turn on the Bluetooth search function in your phone 1 and connect it with the paired
headset. Then the headset will connect with two mobile phones at the same time.
 Answer incoming call:
Press the MF button once to answer the call. Or use your mobile phone to answer it.
 Voice command:
The headset will issue “ YES ” or “ NO ” when there is an incoming call. Speak “ YES ” to answer it
or “ NO ” to reject it.
 Hang up call:
Press the MF button once or use your mobile phone to hang up your call.
 Reject a call:
When there is an incoming call, the headset will issue a sound, keep pressing the MF button for
around 2 seconds, then release or use you mobile phone to reject the call.
 Voice dialing: ( Please make sure your mobile phone supports this function )
Keep pressing the MF button for 2 seconds, then release, your mobile phone will enter into the
voice dialing interface.
 Last call redialing:
Double – click the MF button.
 Voice switch :( English and Chinese )
Under paring mode, keep press the MF button and VOL ( ‐ ) at the same time to achieve it.
 Three – way calling: ( Please make sure whether your phone supports this function)
1. When mobile phone 1 is in conversation, there comes a call from mobile phone 2; pressing
the MF button once. And you can answer the call from mobile phone 2, and the conversation
of mobile phone 1 will be dropped.
2. When mobile phone 1 is in conversation, there comes a call from mobile phone 2; pressing
the MF button for 2 seconds. You can answer the call from mobile phone 2; and keep the
conversation of mobile phone 1.
3. When mobile phone 1 is in conversation, you can keep pressing the MF button for around 2
seconds. The headset will be switched back to mobile phone 1.
4. When mobile phone 2 is in conversation and the mobile phone 1 is reserved. Press the MF
button once, you can answer the call for mobile phone 1, and the conversation of mobile
phone 2 will be dropped.
 Music play / pause:
Press the MF button once to play / pause music.
 Volume adjustment / Music selection:
Keep presses the VOL (+) and VOL (‐) to adjust volume.
Press VOL (+ ) and VOL ( ‐ ) once to select previous track or next track.
FAQ:
1. Headset cannot pair with mobile phone.
Ans: please check whether your headset is in pairing mode or reconnection mode, check whether
Bluetooth search function of you mobile phone has been opened. Thus, check your mobile
device’s Bluetooth menu and delete / forget the headset, reconnect the headset following
instructions of user manual.
2. Headset cannot be switch on.
Ans: Please check the battery status of your headset.
3. Can I change battery for the headset?
Ans: No, this headset use a built – in non – detachable Li – Polymer battery, it cannot be
removed.
4. Can I use headset while driving?
Ans: For safety reason, we strongly recommend not to use over – ear headset to avoid distraction
while driving.
5. Headset disconnect with your mobile phone within 10 meter.
Ans: Please check if there is metal or other material within relatively close range may interfere
Bluetooth connection, as Bluetooth is a radio technology that is sensitive to objects between the
headset and the connected device.
6. Cannot hearing a sound from your computer or mobile phone.
Ans: Please check whether the output channel of your computer is Bluetooth Audio Device and
Bluetooth function of your computer support A2DP profile. And please check volume of your
headset, and computer / mobile phone.
7. Cannot use the headset to control volume or select track of APP of your mobile phone.
Technical Specification
Ans: Software settings of APP may be varied led to some functions of the APP may not control by
the headset










Specification:
Bluetooth version: Bluetooth V3.0
Frequency range: 2.4 GHz – 2.48 GHz
Operating distance: up to 10m ( free space )
Standby time: up to 180hrs
Talking / music – playing time: about 5 hours
Charging time: about 2hours
Bluetooth profiles: A2DP 、AVRCP 、HSP 、Hfp
Frequency response: 20Hz – 20kHz
Operational temperature: ‐ 10 to 50℃
Technical specifications are subject to change without notice, we apologize for any inconvenience.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: 1.This device may not cause harmful interference. 2.This device must accept any
interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure requirement. The device can be used in
portable exposure condition without RF striction

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2015:01:29 13:59:14+08:00
Modify Date                     : 2015:01:29 13:59:14+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Title                           : <4D6963726F736F667420576F7264202D20CBABB1DFC0B6D1C0B5C4CBB5C3F7CAE92E646F63>
Creator                         : Administrator
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:4f0837b2-cf14-4926-a14b-35812bc965b9
Instance ID                     : uuid:ac924978-9fc8-4b0f-88fe-4f35a1eddc15
Page Count                      : 5

EXIF Metadata provided by EXIF.tools