CLEVER BRIGHT CB-M001 BLUETOOTH SPEAKER User Manual mushroom speaker FCC
CLEVER BRIGHT INTERNATIONAL (H.K.) LTD. BLUETOOTH SPEAKER mushroom speaker FCC
User Manual
PARTY PAL BLUETOOTH SPEAKER 1. Power ON/OFF 2. Speaker 3. Previous / Volume 4. Microphone 5. Next / Volume + 6. Charging port 7. LED indicator 8. Suction Cup 9. USB charging cable FEATURES BLUETOOTH PAIRING Maximum Output: 3W S/N ratio: >65db Frequency range: 100Hz-20 KHz Battery voltage: 3.7V DC Distortion THD: <1% Nominal voltage: 3.7V DC Battery: Built –in lithium battery, 3V DC/200mAh Charge Voltage/Current: 5V +0.25V/1A Working time : 2-3 hours (vary with volume) Product size: 60*60*60mm 1. Press Power button to turn ON the speaker until there is a voice notice and LED flashes blue. It is ready to pair. 2. Place the speaker and Bluetooth device (phone or music device) so that they are no further than 1 meter apart. 3. Activate the Bluetooth function on your Bluetooth device (phone or music device). Please refer to the manufacturer’s instruction manual to enable Bluetooth on your device. 4. Select the speaker “ Party Pal Speaker” from the list of available Bluetooth devices. FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, Human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. 5. If required, enter the password “0000”. 6. Once paired successfully, you will hear the confirmation of indication tone . 7. If pairing is unsuccessful, turn off the speaker first and then re-pair following the above steps. 8 Once you have paired the speaker with a device, the speaker will remember this device and will pair automatically when the device’s Bluetooth is activated and in range. 9. The speaker will attempt to automatically connect to the last device it was paired with when turned ON. If you want to pair it with a new device, please follow the steps outlined above. MULTI FUNCTION BUTTONS CHARGING IMPORTANT NOTES Power ON/OFF: Turn ON/OFF speaker. In Bluetooth mode, press this button to : Play/Pause/Answer/End/Cancel Dial. The Speaker includes a built in rechargeable battery. It is recommended to charge the battery fully prior to first use. Connect the USB cable to a computer or other USB charging port and the Mini USB plug into the charging port of the speaker. * This product is not a toys. * Do not drop or damage the speaker. * Do not use in humid or extreme teperatures. * Do not place the speaker near an open flame. * Do not block the sound of the speaker while it is in use. * Do not use the unit if it has been dropped or damaged in any way. * If damaged, do not attempt to repair or disassemble the speaker. Previous / Volume -: Press this button to skip to the previous song. Hold this button down for longer to decrase the volume. Next / Volume+: Press this button to skip to the next song. Hold this button down for longer to increase the volume. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital, pursuant to Part 15 or the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may casue harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --- Reorient or relocate the receiving antenna. --- Increase the separation between the equipment and receiver. --- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --- Consult the dealer or an experienced radio/ TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.6-c014 79.156821, 2014/08/29-03:07:50 Format : application/pdf Title : mushroom speaker FCC Metadata Date : 2017:07:18 15:51:21+08:00 Modify Date : 2017:07:18 15:51:21+08:00 Create Date : 2017:07:18 15:51:20+09:00 Creator Tool : Adobe Illustrator CC 2014 (Windows) Thumbnail Width : 256 Thumbnail Height : 96 Thumbnail Format : JPEG Thumbnail Image : (Binary data 5538 bytes, use -b option to extract) Instance ID : uuid:3deeceba-d188-465b-8d7a-8369cafc683d Document ID : xmp.did:39e57d3a-d9f7-3646-becf-a73c9bcf4cd5 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:9514e87b-9c79-4753-adaa-29b9677aab9d Derived From Document ID : xmp.did:DB09755CC66AE711BEFDB61B2434C514 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:800EC4693C206811822A970F6AF0BA77, xmp.iid:39e57d3a-d9f7-3646-becf-a73c9bcf4cd5 History When : 2015:02:25 18:00:01+11:00, 2017:07:18 15:51:18+08:00 History Software Agent : Adobe Illustrator CS5.1, Adobe Illustrator CC 2014 (Windows) History Changed : /, / Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 489.185303 Max Page Size H : 204.999902 Max Page Size Unit : Millimeters Font Name : DINCond-Regular Font Family : DINCond-Regular Font Face : Regular Font Type : Open Type Font Version : 001.000 Font Composite : False Font File Name : dincond-regular.otf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE Process Black C Swatch Groups Group Name : 默认色板组 Swatch Groups Group Type : 0 Swatch Groups Colorants Swatch Name: PANTONE Process Black C Swatch Groups Colorants Type : SPOT Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Cyan : 0.000000 Swatch Groups Colorants Magenta : 0.000000 Swatch Groups Colorants Yellow : 0.000000 Swatch Groups Colorants Black : 100.000000 Producer : Adobe PDF library 11.00 Slug Checksum : 2525448371 Slug Post Script Name : DINPro-Black Slug Kerning Checksum : 0 Slug Font Kind : OpenType - PS Slug Version : 7.460 Slug Foundry : -- Slug Font Sense 12 Checksum : 2525448371 Slug Outline File Size : 0 Slug Family : DINPro Page Count : 1 Creator : Adobe Illustrator(R) 17.0 For : Yang WU, Bounding Box : 29 74 1986 793 Container Version : 11 Creator Version : 18 Image Height : 719 Image Width : 1957 Image Size : 1957x719 Megapixels : 1.4EXIF Metadata provided by EXIF.tools