User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 929795 |
| Application ID | inc5GW2rUoKJx6VvTJXkTA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 109.73kB (1371576 bits) |
| Date Submitted | 2008-04-18 00:00:00 |
| Date Available | 2008-04-18 00:00:00 |
| Creation Date | 2008-03-11 11:32:04 |
| Producing Software | Acrobat Distiller 6.0 (Windows) |
| Document Lastmod | 2008-03-11 13:40:54 |
| Document Title | User Manual |
| Document Creator | FrameMaker 7.0 |
Preface Notice The company reserves the right to revise this publication or to change its contents without notice. Information contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent vendor. They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication. This publication and any accompanying software may not, in whole or in part, be reproduced, translated, transmitted or reduced to any machine readable form without prior consent from the vendor, manufacturer or creators of this publication, except for copies kept by the user for backup purposes. Brand and product names mentioned in this publication may or may not be copyrights and/or registered trademarks of their respective companies. They are mentioned for identification purposes only and are not intended as an endorsement of that product or its manufacturer. ©March 2008 Trademarks This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home or other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Intel and Intel Core are trademarks/registered trademarks of Intel Corporation. Preface FCC Statement (Federal Communications Commission) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • • Re orient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the service representative or an experienced radio/TV technician for help. Operation is subject to the following two conditions: 1. This device may not cause interference. And 2. II This device must accept any interference, including interference that may cause undesired operation of the device. Preface FCC RF Radiation Exposure Statement: 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and you body. Warning Use only shielded cables to connect I/O devices to this equipment. You are cautioned that changes or modifications not expressly approved by the manufacturer for compliance with the above standards could void your authority to operate the equipment. If your purchase option includes both Wireless LAN and 3.5G modules, then the appropriate antennas will be installed. Note that In order to comply with FCC RF exposure compliance requirements, the antenna must not be co-located or operate in conjunction with any other antenna or transmitter. III Preface IMPORTANT SAFETY INSTRUCTIONS Follow basic safety precautions, including those listed below, to reduce the risk of fire, electric shock, and injury to persons when using any electrical equipment: 1. 2. 3. 4. 5. Do not use this product near water, for example near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. Avoid using this equipment with a telephone line (other than a cordless type) during an electrical storm. There may be a remote risk of electrical shock from lightning. Do not use the telephone to report a gas leak in the vicinity of the leak. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. This product is intended to be supplied by a Listed Power Unit (Full Range AC/DC Adapter – AC Input 100 240V, 50 - 60Hz, DC Output 19V, 3.42A OR 18.5V, 3.5A). CAUTION Always disconnect all telephone lines from the wall outlet before servicing or disassembling this equipment. TO REDUCE THE RISK OF FIRE, USE ONLY NO. 26 AWG OR LARGER, TELECOMMUNICATION LINE CORD This Computer’s Optical Device is a Laser Class 1 Product IV Preface Instructions for Care and Operation The notebook computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions: 1. Don’t drop it, or expose it to shock. If the computer falls, the case and the components could be damaged. Do not expose the computer to any shock or vibration. 2. Do not place it on an unstable surface. Do not place anything heavy on the computer. Keep it dry, and don’t overheat it. Keep the computer and power supply away from any kind of heating element. This is an electrical appliance. If water or any other liquid gets into it, the computer could be badly damaged. Do not expose it to excessive heat or direct sunlight. Do not leave it in a place where foreign matter or moisture may affect the system. Don’t use or store the computer in a humid environment. Do not place the computer on any surface that will block the Vents/Fan Intakes. Preface 3. Avoid interference. Keep the computer away from high capacity transformers, electric motors, and other strong magnetic fields. These can hinder proper performance and damage your data. 4. Follow the proper working procedures for the computer. Shut the computer down properly and don’t forget to save your work. Remember to periodically save your data as data may be lost if the battery is depleted. Do not turn off the power until you properly shut down all programs. 5. Do not turn off any peripheral devices when the computer is on. Take care when using peripheral devices. Use only approved brands of peripherals. VI Do not disassemble the computer by yourself. Unplug the power cord before attaching peripheral devices. Perform routine maintenance on your computer. Preface Power Safety The computer has specific power requirements: • Only use a power adapter approved for use with this computer. • Your AC/DC adapter may be designed for international travel but it still requires a steady, uninterrupted power supply. If you are unsure of your local power specifications, consult your service representative or local power company. • The power adapter may have either a 2-prong or a 3-prong grounded plug. The third prong is an important safety feature; do not defeat its purpose. If you do not have access to a compatible outlet, have a qualified electrician install one. • When you want to unplug the power cord, be sure to disconnect it by the plug head, not by its wire. • Make sure the socket and any extension cord(s) you use can support the total current load of all the connected devices. • Before cleaning the computer, make sure it is disconnected from any external power supplies (i.e. AC/DC adapter or car adapter). Do not plug in the power cord if you are wet. Do not use the power cord if it is broken. Do not place heavy objects on the power cord. Power Safety Warning Before you undertake any upgrade procedures, make sure that you have turned off the power, and disconnected all peripherals and cables (including telephone lines). It is advisable to also remove your battery in order to prevent accidentally turning the machine on. VII Preface Battery Precautions • Only use batteries designed for this computer. The wrong battery type may explode, leak or damage the computer. • Do not remove any batteries from the computer while it is powered on. • Do not continue to use a battery that has been dropped, or that appears damaged (e.g. bent or twisted) in any way. Even if the computer continues to work with a damaged battery in place, it may cause circuit damage, which may possibly result in fire. • Recharge the batteries using the notebook’s system. Incorrect recharging may make the battery explode. • Do not try to repair a battery pack. Refer any battery pack repair or replacement to your service representative or qualified service personnel. • Keep children away from, and promptly dispose of a damaged battery. Always dispose of batteries carefully. Batteries may explode or leak if exposed to fire, or improperly handled or discarded. • Keep the battery away from metal appliances. • Affix tape to the battery contacts before disposing of the battery. • Do not touch the battery contacts with your hands or metal objects. Battery Disposal & Caution The product that you have purchased contains a rechargeable battery. The battery is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used battery according to the manufacturer’s instructions. VIII Preface Cleaning Do not apply cleaner directly to the computer; use a soft clean cloth. Do not use volatile (petroleum distillates) or abrasive cleaners on any part of the computer. Servicing Do not attempt to service the computer yourself. Doing so may violate your warranty and expose you and the computer to electric shock. Refer all servicing to authorized service personnel. Unplug the computer from the power supply. Then refer servicing to qualified service personnel under any of the following conditions: • • • • • When the power cord or AC/DC adapter is damaged or frayed. If the computer has been exposed to rain or other liquids. If the computer does not work normally when you follow the operating instructions. If the computer has been dropped or damaged (do not touch the poisonous liquid if the LCD panel breaks). If there is an unusual odor, heat or smoke coming from your computer. Removal Warning When removing any cover(s) and screw(s) for the purposes of device upgrade, remember to replace the cover(s) and screw(s) before turning the computer on. IX Preface Travel Considerations Packing As you get ready for your trip, run through this list to make sure the system is ready to go: 1. 2. 3. 4. 5. 6. 7. 8. Check that the battery pack and any spares are fully charged. Power off the computer and peripherals. Close the display panel and make sure it’s latched. Disconnect the AC/DC adapter and cables. Stow them in the carrying bag. The AC/DC adapter uses voltages from 100 to 240 volts so you won’t need a second voltage adapter. However, check with your travel agent to see if you need any socket adapters. Put the notebook in its carrying bag and secure it with the bag’s straps. If you’re taking any peripherals (e.g. a printer, mouse or digital camera), pack them and those devices’ adapters and/or cables. Anticipate customs - Some jurisdictions may have import restrictions or require proof of ownership for both hardware and software. Make sure your documents are prepared. Power Off Before Traveling Make sure that your notebook is completely powered off before putting it into a travel bag (or any such container). Putting a notebook which is powered on in a travel bag may cause the vent(s)/fan intake(s)/outlet(s) to be blocked. To prevent your computer from overheating make sure nothing blocks the vent(s)/fan intake(s)/outlet(s) while the computer is in use. Preface On the Road In addition to the general safety and maintenance suggestions in this preface, and Chapter 8: Troubleshooting, keep these points in mind: Hand-carry the notebook - For security, don’t let it out of your sight. In some areas, computer theft is very common. Don’t check it with normal luggage. Baggage handlers may not be sufficiently careful. Avoid knocking the computer against hard objects. Beware of Electromagnetic fields - Devices such as metal detectors & X-ray machines can damage the computer, hard disk, floppy disks, and other media. They may also destroy any stored data - Pass your computer and disks around the devices. Ask security officials to hand-inspect them (you may be asked to turn it on). Note: Some airports also scan luggage with these devices. Fly safely - Most airlines have regulations about the use of computers and other electronic devices in flight. These restrictions are for your safety, follow them. If you stow the notebook in an overhead compartment, make sure it’s secure. Contents may shift and/or fall out when the compartment is opened. Get power where you can - If an electrical outlet is available, use the AC/DC adapter and keep your battery(ies) charged. Keep it dry - If you move quickly from a cold to a warm location, water vapor can condense inside the computer. Wait a few minutes before turning it on so that any moisture can evaporate. XI Preface Developing Good Work Habits Developing good work habits is important if you need to work in front of the computer for long periods of time. Improper work habits can result in discomfort or serious injury from repetitive strain to your hands, wrists or other joints. The following are some tips to reduce the strain: •Adjust the height of the chair and/or desk so that the keyboard is at or slightly below the level of your elbow. Keep your forearms, wrists, and hands in a relaxed position. •Your knees should be slightly higher than your hips. Place your feet flat on the floor or on a footrest if necessary. •Use a chair with a back and adjust it to support your lower back comfortably. •Sit straight so that your knees, hips and elbows form approximately 90-degree angles when you are working. • Take periodic breaks if you are using the computer for long periods of time. Remember to: •Alter your posture frequently. •Stretch and exercise your body several times a day. •Take periodic breaks when you work at the computer for long periods of time. Frequent and short breaks are better than fewer and longer breaks. XII Preface Lighting Proper lighting and comfortable display viewing angle can reduce eye strain and muscle fatigue in your neck and shoulders. • • • • Position the display to avoid glare or reflections from overhead lighting or outside sources of light. Keep the display screen clean and set the brightness and contrast to levels that allow you to see the screen clearly. Position the display directly in front of you at a comfortable viewing distance. Adjust the display-viewing angle to find the best position. LCD Screen Care To prevent image persistence on LCD monitors (caused by the continuous display of graphics on the screen for an extended period of time) take the following precautions: • • • • Set the Windows Power Plans to turn the screen off after a few minutes of screen idle time. Use a rotating, moving or blank screen saver (this prevents an image from being displayed too long). Rotate desktop background images every few days. Turn the monitor off when the system is not in use. XIII Preface XIV Quick Start Guide Chapter 1: Quick Start Guide Overview This Quick Start Guide is a brief introduction to the basic features of your computer, to navigating around the computer and to getting your system started. Advanced Users If you are an advanced user you may skip over most of this Quick Start Guide.You may also find the notes marked with a of interest to you. Beginners and Not-So-Advanced Users If you are new to computers (or do not have an advanced knowledge of them) then the information contained in this Quick Start Guide should be enough to get you up and running. Eventually you should try to look through all the documentation (more detailed descriptions of the functions, setup and system controls are covered in the remainder of the User’s Manual), but do not worry if you do not understand everything the first time. Keep this manual nearby and refer to it to learn as you go. You may find it useful to refer to the notes marked with a as indicated in the margin. Notes Check the light colored boxes with the mark above to find detailed information about the computer’s features. Warning Boxes No matter what your level please pay careful attention to the warning and safety information indicated by the symbol. Also please note the safety and handling instructions as indicated in the Preface. Overview - 1 1 Quick Start Guide Model Differences This notebook series includes two different model types (there are also some designs styles that include aluminum top covers - see below) which differ slightly in design style and LCD size (see “Specifications” on page A - 1). Not Included Operating Systems (e.g. Windows Vista) and applications (e.g. word processing, spreadsheet and database programs) have their own manuals, so please consult the appropriate manuals. System Software Your computer may already come with system software pre-installed. Where this is not the case, or where you are re-configuring your computer for a different system, you will find this manual refers to the Microsoft Windows Vista operating system. Aluminum Covers Note that this computer series includes some model designs with aluminum top covers. In order to clean this type of cover use a soft, clean, slightly damp cloth to carefully wipe of any marks (e.g. fingerprints). DO NOT use volatile (petroleum distillates) or abrasive cleaners on any part of the computer. 2 - Overview Quick Start Guide System Software Your computer may already come with system software pre-installed. Where this is not the case, or where you are re-configuring your computer for a different system, you will find the following operating systems are supported. Operating System & Version Note *Windows XP (Home or Professional) In order to run Windows XP without limitations or decreased performance, your computer requires a minimum 512MB of system memory (RAM) Windows Vista - SP1 (64-bit) Home Basic Edition Windows Vista - SP1 (64-bit) Home Premium Edition Windows Vista - SP1 (64-bit) Business/Enterprise/Ultimate Editions In order to run Windows Vista without limitations or decreased performance, your computer requires a minimum 1GB of system memory (RAM). Table 1 - 1 - Operating Systems Supported Windows Vista Service Pack 1 Make sure you install Windows Vista Service Pack 1 (or a Windows Vista version which includes Service Pack 1) before installing any drivers. Go to the Microsoft website for download details, or contact your service center. Overview - 3 1 Quick Start Guide System Startup 1. 2. 3. 4. 5. Remove all packing materials, and place the computer on a stable surface. Securely attach any peripherals you want to use with the notebook (e.g. keyboard and mouse) to their ports. Attach the AC/DC adapter to the DC-In jack on the left of the computer, then plug the AC power cord into an outlet, and connect the AC power cord to the AC/DC adapter. Use one hand to carefully raise the lid/LCD to a comfortable viewing angle, while using the other hand (as illustrated in Figure 1 - 1 below) to support the base of the computer (Note: Never lift the computer by the lid/LCD). Press the power button to turn the computer “on”. Model A Model B Shutdown Note that you should always shut your computer down by choosing the Shut Down command from the Lock Button Menu in Windows Vista. This will help prevent hard disk or system problems. Figure 1 - 1 - Opening the Lid/LCD/Computer with AC/DC Adapter Plugged-In 4 - System Startup Quick Start Guide System Map: LCD Panel Open - Model A Figure 1 - 2 LCD Panel Open Model A Wireless Device Operation Aboard Aircraft 1. The use of any portable electronic transmission devices aboard aircraft is usually prohibited. Make sure the module(s) are OFF if you are using the computer aboard aircraft. Use the key combinations to toggle power to the 3.5G/WLAN/Bluetooth modules, and check the LED indicator icon to see if the modules are powered on or not (see Table 1 - 5, on page 10/ Table 1 - 3, on page 7). 10 11 Built-In PC Camera (Optional) 2. LCD 3. Speakers 4. Power Button 5. Hot Key Buttons 6. LED Status Indicators 7. Keyboard 8. Touchpad & Buttons 9. LED Power & Communication Indicators 10. Fingerprint Module (Optional) 11. Built-In Microphone Note the cleaning instructions for aluminum covers - see page 2. System Map: LCD Panel Open - Model A - 5 1 Quick Start Guide Figure 1 - 3 LCD Panel Open Model B System Map: LCD Panel Open - Model B Wireless Device Operation Aboard Aircraft 1. Built-In PC Camera (Optional) 2. LCD 3. Built-In Microphone 4. Power Button 5. Hot Key Buttons 6. LED Status Indicators 7. Keyboard 8. Touchpad & Buttons 9. LED Power & Communication Indicators 10. Fingerprint Module (Optional) Note the cleaning instructions for aluminum covers - see page 2. The use of any portable electronic transmission devices aboard aircraft is usually prohibited. Make sure the module(s) are OFF if you are using the computer aboard aircraft. Use the key combinations to toggle power to the 3.5G/WLAN/Bluetooth modules, and check the LED indicator icon to see if the modules are powered on or not (see Table 1 - 5, on page 10/ Table 1 - 3, on page 7). 10 6 - System Map: LCD Panel Open - Model B Quick Start Guide LED Indicators The two sets of LED indicators (LED Status Indicators and LED Power & Communication Indicators) on the computer display helpful information about the current status of the computer. Icon Icon Color Description Orange DC Power is Plugged In Green The Computer is On Blinking Green The Computer is in Sleep Mode Color Description Orange The Battery is Charging Green Silent Mode Activated (see over) Green The Battery is Fully Charged Off Normal Mode Activated (see over) Blinking Orange The Battery Has Reached Critically Low Power Status Green Hard Disk Activity Green The (optional) Wireless LAN Module is Powered On Orange The (optional) Bluetooth Module is Powered On Green The (optional) 3.5G Module is Powered On Green Number Lock Activated Green Caps Lock Activated Green Scroll Lock Activated (to activate press Fn & Scr Lk) Table 1 - 2 - LED Status Indicators Table 1 - 3 - LED Power & Communication Indicators System Map: LCD Panel Open - Model B - 7 1 Quick Start Guide Hot Key Buttons & Keyboard These buttons give instant access to the default Internet browser and e-mail program, and allow you to toggle the Silent Mode on/off with one quick button press. Hot Key Function Activate the Default E-Mail Browser Activate the Default Internet Program Toggle *Silent Mode (for power saving) Table 1 - 4 - Hot Key Buttons *When enabled, Silent Mode will reduce fan noise and save power consumption. Note this may reduce computer performance. 8 - Hot Key Buttons & Keyboard The keyboard has a numerical keypad for easy numeric data input, and features Function Keys to allow you to change operational features instantly. Activate the Number Lock feature by pressing the Num Lk key at the top right of the keyboard. You may check if Number Lock is enabled or not by looking at the LED status indicators. Other Keyboards If your keyboard is damaged or you just want to make a change, you can use any standard USB keyboard. The system will detect and enable it automatically. However special functions/AP-Key buttons unique to the system’s regular keyboard may not work. Quick Start Guide Keyboard The keyboard has a numerical keypad for easy numeric data input, and features function keys to allow you to change operational features instantly. See Table 1 - 5, on page 10 for full function key combination details. Function Keys NumLk & ScrLk Keys Play/Pause Key Numerical Keypad 3.5G Module Power Toggle Key Fn Key Other Keyboards If your keyboard is damaged or you just want to make a change, you can use any standard USB keyboard. The system will detect and enable it automatically. However special functions/ hot-keys unique to the system’s regular keyboard may not work. Figure 1 - 4 - Keyboard NumLk & ScrLk Hold down the Fn Key and either NumLk or ScrLk to enable number or scroll lock, and check the LED indicator for status. Special Characters Some software applications allow the number-keys to be used with Alt to produce special characters. These special characters can only be produced by using the numeric keypad. Regular number keys (in the upper row of the keyboard) will not work. Make sure that NumLk is on. Keyboard - 9 1 Quick Start Guide Function/Hot Key Indicators The function keys (F1 - F12 etc.) will act as hot keys when pressed while the Fn key is held down. In addition to the basic function key combinations; visual indicators are available when the hot key utility provided is installed. When the driver is installed, an icon will appear in the taskbar. Keys Function Keys Function Fn + ~ Play/Pause (in Audio/Video Programs) Fn + F7 Display Toggle 3.5G Module Power Toggle Fn + F8/F9 Fn + Fn + F1 TouchPad Toggle Brightness Decrease/Increase Fn + F10 PC Camera Power Toggle Fn + F2 Turn LCD Backlight Off (Press a key to or use TouchPad to turn on) Fn + F11 WLAN Module Power Toggle Fn + F3 Mute Toggle Fn + F12 Bluetooth Module Power Toggle Fn + F4 Fn + F5/F6 Sleep Toggle Volume Decrease/Increase *Silent Mode Toggle *When enabled, Silent Mode will reduce fan noise and save power consumption. Note this may reduce computer performance. Table 1 - 5 - Function & Hot Key Indicators 10 - Function/Hot Key Indicators Quick Start Guide System Map: Front & Rear Views Figure 1 - 5 Front & Rear Views Model A 1. 3 4 5 Model B 2. 3. 4. 5. 3 4 5 Model A 6. LED Power & Communication Indicators 7-in-1 Card Reader S/PDIF-Out Jack Microphone-In Jack Headphone-Out Jack Battery Model B 7-in-1 Card Reader The card reader allows you to use the most popular digital storage card formats: MMC (MultiMedia Card) / SD (Secure Digital) / MS (Memory Stick) / MS Pro (Memory Stick Pro) / MS Duo (requires PC adapter) / Mini SD (requires PC adapter) / RS MMC (requires PC adapter) System Map: Front & Rear Views - 11 1 Quick Start Guide Figure 1 - 6 Left & Right Views 1. 2. 3. 4. 5. 6. 7. 8. 9. DC-In Jack RJ-45 LAN Jack External Monitor Port Vent/Fan Intake/ Outlet 3 * USB 2.0 Ports ExpressCard Slot Optical Device Drive Bay RJ-11 Phone Jack Security Lock Slot System Map: Left & Right Views Model A Model B Model A Model B Overheating To prevent your computer from overheating make sure nothing blocks the vent(s)/fan intake(s) while the computer is in use. 12 - System Map: Left & Right Views Quick Start Guide Disk Eject Warning Changing DVD Regional Codes Don’t try to eject a CD/DVD while the system is accessing it. This may cause the system to “crash”. Stop the disk first then eject it, or press the stop button twice. Go to the Control Panel and double-click Device Manager (Hardware and Sound), then click the + next to DVD/CD-ROM drives. Double-click on the DVD-ROM device to bring up the Properties dialog box, and select the DVD Region (tab) to bring up the control panel to allow you to adjust the regional code. CD/DVD Emergency Eject If you need to manually eject a CD/DVD (e.g. due to an unexpected power interruption) you may push the end of a straightened paper clip into the emergency eject hole. Do not use a sharpened pencil or any object that may break and become lodged in the hole. Don’t try to remove a floppy disk/CD/DVD while the system is accessing it. This may cause the system to “crash”. DVD region detection is device dependent, not OSdependent. You can select your module’s region code 5 times. The fifth selection is permanent. This cannot be altered even if you change your operating system or you use the module in another computer. System Map: Left & Right Views - 13 1 Quick Start Guide Figure 1 - 7 Bottom View 1. 2. 3. 4. 5. Battery Hard Disk Bay Cover (3.5G Module Location) RAM & CPU Bay Cover Vent/Fan Intake/ Outlet (Model B Only Speakers (Model B Only) CPU The CPU is not a user serviceable part. Opening this compartment, or accessing the CPU in any way, may violate your warranty. System Map: Bottom View Overheating To prevent your computer from overheating make sure nothing blocks the Vent/Fan Intake while the computer is in use. Model A Battery Information Always completely discharge, then fully charge, a new battery before using it. Completely discharge and charge the battery at least once every 30 days or after about 20 partial discharges. Model B 14 - System Map: Bottom View Quick Start Guide Windows Vista Start Menu & Control Panel Most of the control panels, utilities and programs within Windows Vista (and most other Windows versions) are accessed from the Start menu. When you install programs and utilities they will be installed on your hard disk drive, and a shortcut will usually be placed in the Start menu and/or the desktop. Right-click the Start menu icon , and then select Properties if you want to customize the appearance of the Start menu. Click here to toggle Classic View Figure 1 - 8 - Start Menu & Control Panel In many instances throughout this manual you will see an instruction to open the Control Panel. The Control Panel is accessed from the Start menu, and it allows you to configure the settings for most of the key features in Windows (e.g. power, video, network, audio etc.). Windows Vista provides basic controls for many of the features, however many new controls are added (or existing ones are enhanced) when you install the drivers provided. To see all controls it may be necessary to toggle to Classic View on. Windows Vista Start Menu & Control Panel - 15 1 Quick Start Guide Video Features You can switch display devices, and configure display options, from the Display Settings control panel (in Personalization) in Windows Vista as long as the appropriate Intel video driver is installed. To access Display Settings in Windows Vista: 1. 2. 3. 4. 5. 6. 7. Click Start, and click Control Panel (or point to Settings and click Control Panel). Click Adjust screen resolution under the Appearance and Personalization menu (or double-click Personalization > Display Settings). Move the slider to the preferred setting in Resolution: 1 (Figure 1 - 9 on page 17). Click the arrow, and scroll to the preferred setting In Colors: 2 (Figure 1 - 9 on page 17). Click Advanced Settings (button) 3 (Figure 1 - 9 on page 17) and click Intel(R) GMA Driver for mobile (tab). Click Graphics Properties (button) 4 (Figure 1 - 9 on page 17) to access the Intel GMA control panel (this control panel can also be accessed by double-clicking Intel(R) GMA Driver for mobile in Classic View). The Intel GMA control panel can also be accessed by clicking the icon in the taskbar and selecting Graphics Properties from the menu. Display Devices & Options Besides the built-in LCD, you can also use an external VGA monitor (CRT) or external Flat Panel Display connected to the external monitor port as your display device. 16 - Video Features Quick Start Guide Figure 1 - 9 - Display Properties Desktop Intel Display Mode Description Single Mode One of the connected displays is used as the display device Intel(R) Dual Display Clone Mode Both connected displays output the same view and may be configured independently Extended Desktop Mode Both connected displays are treated as separate devices, and act as a virtual desktop Table 1 - 6 - Display Options Video Features - 17 1 Quick Start Guide Power Options The Power Options (Hardware and Sound menu) control panel icon in Windows (see page 15) allows you to configure power management features for your computer. You can conserve power by means of power plans and configure the options for the power button, sleep button, computer lid (when closed), display and sleep mode from the left menu. Note that the Power saver plan may have an affect on computer performance. Click to select one of the existing plans, or click Create a power plan in the left menu and select the options to create a new plan. Click Change Plan Settings and click Change advanced power settings to access further configuration options. Note: Sleep is the default power saving state in Windows Vista Figure 1 - 10 - Power Options 18 - Power Options Specifications Appendix A: Specifications Latest Specification Information The specifications listed in this Appendix are correct at the time of going to press. Certain items (particularly processor types/ speeds and CD/DVD device types) may be changed, delayed or updated due to the manufacturer's release schedule. Check with your service center for details. Specifications A - 1 Specifications Feature Processor Specification Intel® Core™2 Duo Processor 35W - (478-pin) Micro-FC-PGA Package - Socket-P 45nm (45 Nanometer) Process Technology 6MB On-die L2 Cache & 1006MHz FSB 2.53/ 2.8 GHz Intel® Core™2 Duo Processor 25W - (478-pin) Micro-FC-PGA Package - Socket-P 45nm (45 Nanometer) Process Technology 3MB On-die L2 Cache & 1006MHz FSB 2.13/ 2.4/ 2.53 GHz Core Logic Intel GM45 + ICH9M Chipset LCD Model A: Model B: 12.1" WXGA (1280 * 800) TFT LCD 13.3" WXGA (1280 * 800) TFT LCD Memory 64-bit Wide DDRII (DDR2) Data Channel Supports Dual Channel DDRII SDRAM Two 200 Pin SO-DIMM Sockets Supporting DDRII (DDR2) 667MHz/800MHz RAM Modules Memory Expandable up to 4GB (512/1024/2048 MB DDRII Modules) Video Adapter Intel GM45 Integrated Video High Preference 3D/2D Graphic Accelerator Supports Dynamic Video Memory Technology DVMT (up to 256MB dynamically allocated from system memory where needed) Supports DirectX10 3D Graphics Engine Accelerator Security Security (Kensington® Type) Lock Slot Fingerprint ID Reader Module (Factory Option) A - 2 Specifications BIOS Password Trusted Platform Module V1.2 Specifications Feature Specification BIOS One 16Mb SPI Flash ROM Phoenix™ BIOS Storage One Changeable 12.7mm(h) SATA (Serial) Optical Device (CD/DVD) Type Drive (see “Optional” on page A - 5) Easy Changeable 2.5" 9.5 mm (h) SATA (Serial) HDD Audio High Definition Audio (HDA) Compliant with Microsoft UAA (Universal Audio Architecture) Direct Sound 3D™ Compatible 2 * Built-In Speakers Built-In Microphone Keyboard & Pointing Device Winkey Keyboard Built-In TouchPad with Scrolling Function Interface Three USB 2.0 Ports One Headphone-Out Jack One Microphone-In Jack One S/PDIF Out Jack One Internal Microphone One RJ-11 Modem Jack One RJ-45 LAN Jack One DC-In Jack One External Monitor Port Card Reader Embedded 7-in-1 Card Reader (MS/ MS Pro/ SD/ Mini SD/ MMC/ RS MMC/ MS Duo) Note: MS Duo/ Mini SD/ RS MMC Cards require a PC adapter ExpressCard Slot One ExpressCard/34(54) Slot Specifications A - 3 Specifications Feature Communication *Note: The 3.5G and Intel Turbo Memory Modules (see page A - 5) cannot coexist. If one of these factory options is included in your purchase option, then the other is unavailable. Specification 10M/ 100/ 1000Mb Base-TX Ethernet LAN Azalia 56K Modem V.90 & V.92 Compliant Intel® WiMAX/Wi-Fi Link 5050 Series Combo Mini-Card Module (Option) Intel® WiFi Link 5000 Series (802.11 a/b/g/n) Wireless LAN Mini-Card Module (Option) 3rd Party 802.11b/g Wireless LAN Mini-Card Module with USB interface (Option) Bluetooth 2.0 + EDR (Enhanced Data Rate) Module (Factory Option) 1.3M (UVC or non UVC) or 2.0M Pixel PC Camera Module with USB interface (Factory Option) 3.5G Module (see sidebar and page A - 5): *UMTS/HSPDA-based 3.5G Mini-Card Module with USB Interface (Factory Option) Quad-band GSM/GPRS (850 MHz, 900 MHz, 1800 MHz, 1900 MHz) UMTS WCDMA FDD (2100 MHz) UMTS Modes Note that UMTS modes CAN NOT be used in North America. Power Management Supports ACPI 3.0 Power Full Range AC/DC Adapter AC Input 100 - 240V, DC Output 50 - 60Hz, 19V, 3.42A or 18.5V, 3.5A (65 Watts) Battery 4 Cell Smart Lithium-Ion Battery Pack, 14.8V/2.4AH 8 Cell Smart Lithium-Ion Battery Pack, 14.8V/4.4AH (Option) A - 4 Specifications Supports Wake on LAN Supports Resume from Modem Ring Specifications Feature Specification Environmental Spec Temperature Operating: Non-Operating: Dimensions & Weight Model A: Model B: 299mm (w) * 219mm (d) * 26.5-35.7mm (h) 1.88 kg With 4 Cell Battery and ODD 310mm (w) * 233mm (d) * 26.5-35.7mm (h) 2.0 kg With 4 Cell Battery and ODD Optional Optical Drive Module Options: SATA DVD/CD-RW Combo Drive Module SATA DVD Dual (Super Multi) Drive Module Fingerprint ID Reader Module (Factory Option) *Note: The 3.5G and Intel Turbo Memory Modules cannot coexist. If one of these factory options is included in your purchase option, then the other is unavailable. 5°C ~ 35°C -20°C ~ 60°C Intel® WiMAX/Wi-Fi Link 5050 Series Combo Mini-Card Module Intel® WiFi Link 5000 Series (802.11 a/b/g/n) Wireless LAN Mini-Card Module 3rd Party 802.11b/g Wireless LAN Mini-Card Module with USB interface 8 Cell Smart Lithium-Ion Battery Pack 1.3M (UVC or non UVC) or 2.0M Pixel USB PC Camera Module (Factory Option) Bluetooth 2.0 + EDR (Enhanced Data Rate) Module (Factory Option) Relative Humidity Operating: Non-Operating: 20% ~ 80% 10% ~ 90% *Intel Turbo Memory (Robson) NAND Flash Memory Card Module (Factory Option) OR *UMTS/HSPDA-based 3.5G Module with Mini Card Interface (Factory Option) Quad-band GSM/GPRS (850 MHz, 900 MHz, 1800 MHz, 1900 MHz) UMTS WCDMA FDD (2100 MHz) UMTS Modes Note that UMTS modes CAN NOT be used in North America. Specifications A - 5 Specifications A - 6
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 40 Page Mode : UseOutlines Page Layout : SinglePage XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:9c40dd73-ebfe-4b8b-bb5a-7fb09246695b Producer : Acrobat Distiller 6.0 (Windows) Creator Tool : FrameMaker 7.0 Modify Date : 2008:03:11 13:40:54+08:00 Create Date : 2008:03:11 11:32:04Z Metadata Date : 2008:03:11 13:40:54+08:00 Document ID : uuid:e0a13664-034d-48ef-a757-14b26770d228 Format : application/pdf Title : Creator : Author :EXIF Metadata provided by EXIF.tools