COMMAX WLO24TX Wireless Observation System User Manual
COMMAX Co., Ltd. Wireless Observation System
COMMAX >
User Manual
Class B device NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the se paration between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. [ CAUTION ] Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment. [FCC compliance Information] This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received. Including interference that may cause undesired operation. [FCC WARNING] This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. ■ FEATURES Camera connection Power connection(+) Ground Channel switch Channel switch Monitor terminal Power terminal(INPUT) ■ Accessories Please check if following contents are included in a package 1) Transmitter 3) Manual 2) Receiver 4) Power cable for Receiver ■ Operation You should install the transmitter and receiver in putting opposite as shown below and connect power and other cables. Monitor WLO24RX (Receiver) Camera WLO24TX (Transmitter) 1) The distance between the receiver and transmitter should be within 1~5 meters, when you install. 2) The device can be used by altering transmitter-receiver channels through optional channel selection switch. NOTE : 1) The device may be affected by outside signals depending on the surrounding conditions. 2) The device is set to CH1 default. ■ Specification Item Condition Specification Operating Voltage Consumption Power On operating Frequency bandwidth Distance Ambient Temperature (No obstacle) DC 11-28V WLO24RX : MAX 12W (Including Monitor) WLO24TX : MAX 4.5W(Including Camera) 2414MHz ~2468MHz 5M -10°C ~ +50°C TX : 96.7Pi X 42mm RX : 147(W) X135(H) X49.5(D)mm Dimension Video Channel/Frequency CH1 CH2 CH3 CH4 Assigned Frequency (MHz) 2414 2432 2450 2468 ± ± ± ± 0.1 0.1 0.1 0.1 Audio Channel/Frequency Assigned Frequency (MHz) CH1 CH2 CH3 CH4 2414 2432 2450 2468 ± ± ± ±
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 5 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:d9865815-82dd-4524-a5aa-83b89c4a25e1 Producer : Acrobat Distiller 6.0 (Windows) Modify Date : 2007:05:10 11:27:00+09:00 Create Date : 2007:05:04 14:20:18+09:00 Metadata Date : 2007:05:10 11:27:00+09:00 Document ID : uuid:86d4c68f-02ec-428d-acff-e999e5496f6b Format : application/pdf Title : untitledEXIF Metadata provided by EXIF.tools