COSHIP ELECTRONICS 2007122901 DTV Converter Box User Manual N9900T p65

COSHIP ELECTRONICS CO., LTD. DTV Converter Box N9900T p65

Users Manual

DTV Converter BoxUSER’S MANUAL1The lightning flash with arrowhead symbol, withinan equilateral triangle, isintended to alert the user to the pres-ence of uninsulated “dangerous volt-age” within the product’s enclosurethat may be of sufficient magnitude toconstitute a risk to persons.The exclamation point,within an equilateraltriangle, is intended toalert the user to the presence of im-portant operating and maintenance(servicing) instructions in the literatureaccompanying the appliance.WARNING/CAUTIONPlease be aware that new software maychange the functionality of the STB.The photo and the function explanationinvolved in this specification is forreference only. If there is any mistake,please refer to the entity.Any changes or modifications notexpressly approved by the partyresponsible for compliance could voidthe user’s authority to operate theequipment.NOTICEThis device complies with Part15 ofthe FCC Rules. Operation is subjectto the following two condition: (1)thisdevice may not cause harmfulinterference,and (2) this device mustaccept any interference received,in-cluding interference that may causeundesired operation.FCC
2 DTV Converter BoxUSER’S MANUALBe sure to read thisuser’s manual beforestarting your operation.Never open the cover.It is very dangerous totouch the inside of theunit due to possibleelectric shock.When you don’t usethis unit for a long time,please pull the powercord from the outlet.Also do not use a dam-aged power cord.Do not touch the powerwithwet hand. If thereis liquid flowing intothe unit, pull out thepower cord immedi-ately because it maycause fire or electricshock.Place the unit in a wellventilated and no heatenvironment.Install the unithorizontally. Unbal-anced installation maycause the unit to bedamaged by itself.When the unit is sud-denly moved to a hotarea from a cold area,it may cause problems. In that case, turnoff the power, and turnon after 1-2 hours.Install the unit in aplace with:good ventilationsuitable temperatureno direct sunrayslow humiditylow vibration influenceDo not put heavy ob-jects on the unit.SAFETY INSTRUCTIONSPlease read these safety instructions through carefully, before operating the receiver.Please observe all warnings and instructions on the equipment and contained inthese operating instructions.
DTV Converter BoxUSER’S MANUAL3Table of ContentsSAFETY INSTRUCTIONS 2GENERAL INFORMATION 41. Main Features 42. Unpacking 4OVERVIEW OF THE EQUIPMENT 51. Front Panel 52. Rear Panel 63. Remote Control Unit 74. Installation of STB 84.1 Connecting to TV using RCA Sup-port 84.2 Connecting to TV using RF Sup-port 8FIRST STEPS 9MENU INFORMATION 9ON SCREEN MENUS SELECTION 101. Main Menu 102. Channel 111.1 Channel Scan 111.2 Channel Add 121.3 Channel Edit 121.4 Manual Scan 131.5 Smart Antenna 132. OPTION 142.1 Clock 142.2 Aspect Ratio 142.3 Language 152.4 Audio Language 152.5 Caption Select 152.6 DCC Setup 162.7 Sleep Mode 162.8 Output Channel 163. LOCK 173.1 Lock System 173.2 Set Password 173.3 Block Channel 183.4 TV Rating-Children 183.5 TV Rating-General 193.6 Movie Rating 203.7 Downloadable RRT 20TECHNICAL SPECIFICATION 21TROUBLE SHOOTING 21
4 DTV Converter BoxUSER’S MANUAL2. UnpackingUnpack the receiver and check tomake sure that all of the followingitems are included in the packaging.1 x Remote Control Unit1 x User’s Manual1 x Digital Terrestrial Re-ceiverIncorporating the highly integratedsingle chip, the receiver is a cost-effective and high performance digi-tal ATSC converter box. The receiverprovides FTA (Free-To-Air) channelswith user-friendly OSD (On ScreenDisplay)1. Main FeaturesFully ATSC / MPEG -2 HDcompliantReceives HD ATSC Terres-trial broadcast Channels 2-69Decodes all 18 ATSC DTVstandard formats256 colors on screen display(OSD) supported7 days Electronic ProgramGuide (EPG)Teletext output through VBIand OSDGENERAL INFORMATIONMulti-language OSD (English,French, Spanish)Multi-language audio supportedMulti-language Subtitle outputsupportedEIA 608 Closed Caption Parent control (V-chip)
DTV Converter BoxUSER’S MANUAL5OVERVIEW OF THE EQUIPMENT1. Front PanelRemote Control Sensor change to the next channelchange to the previous channel switch between operation and standby modes
6 DTV Converter BoxUSER’S MANUAL2. Rear Panel Main power switch UHF RF output to TV set’s antenna in VIDEORight audio Left audio Connect to terrestrial antenna
DTV Converter BoxUSER’S MANUAL73. Remote Control Unit Function Function 1 MUTE 13 Signal Strength 2 CC 14 Page+ 3 Numeric Key 15 Page- 4 Reserved for future use 16 GUIDE 5 Sleep Mode 17 INFO 6 AUDIO 18 Flash Back 7 MENU 19 RATIO 8 ARROW 20 EXIT 9 VOL+ 21 OK 10 VOL- 22 CH+/Page+ 11 DASH(-) 23 CH-/Page- 12 STANDBY
8 DTV Converter BoxUSER’S MANUAL4. Installation of STBThis section explains the installation of the STB. If you need any assistance forspecific equipment connection, please contact your local dealer.4.1 Connecting to TV using RCA Support4.2 Connecting to TV using RF Support
DTV Converter BoxUSER’S MANUAL9FIRST STEPSInsert the receiver’s plug in the power socket.the receiver starts up in Standby mode. On the display the current time is shown.Insert the plugs of the auxiliary equipments in the power socket and switch them on.Select the AV channel on the TV set.The receiver is delivered with pre-programmed TV channels and can be usedimmediately. To see if there are any new channels, then activate the channel search.Caution!Check the connections of all equipment and the antenna are in working order beforeconnecting the receiver to the power source.MENU INFORMATIONThe user interface has various ways to navigate through the menus and functions.Some of the keys on the remote control unit give direct access to functions. The mostimportant keys are identified as EPG, colored keys, MENU and OK. Other keys aremulti-functional which means that their function changes dependent of the modethat you are in.Unless otherwise specified; this note explains the way you can navigate through thepages of the user menu.1. Use the keys to move the cursor left or right from one line to another line.2. Use the keys to move the cursor up or down in the sub-menu.3. Use the OK key to enter the sub-menu.4. Use the EXIT key to leave the menu and return to the view mode.5. In a sub-menu:-use the OK key to confirm the selection;-the green or white bar indicates the active selection
10 DTV Converter BoxUSER’S MANUALON SCREEN MENUS SELECTION1. Main MenuPressing the MENU key will display the Main Menu. This menu provides three options.CHANNELOPTIONLOCK
DTV Converter BoxUSER’S MANUAL112. Channel1.1 Channel ScanFrom here, select key or OK key to scan the channels.During the searching process, OK key is used to cancel the whole process.CHANNEL Channel Scan 1Channel Scan 2Channel Scan 3
12 DTV Converter BoxUSER’S MANUAL1.2 Channel Addkey or OK key to lead you to the channel add.1.3 Channel EditPress OK to delete or add the selected channel.
DTV Converter BoxUSER’S MANUAL131.4 Manual ScanIn this mode, only one RF channel can be searched. You can use the functionto scan the desired channels. Press keys to select the RF-channel number.1.5 Smart AntennaSelect CH2 or CH3.
14 DTV Converter BoxUSER’S MANUAL2. OPTION2.1 ClockCurrent Time: Displays the current time.Time Zone: Select proper option according to the time zone you have been.2.2 Aspect RatioThis option allows you to select the aspect ratio of the video output.
DTV Converter BoxUSER’S MANUAL152.3 LanguageSelect the desired language for menu.2.4 Audio LanguageThis option allows you to select your first and second choice for the audiolanguage.2.5 Caption SelectSelect the desired option for caption.
16 DTV Converter BoxUSER’S MANUAL2.6 Sleep ModeSets the time after which the receiver switches itself off.
DTV Converter BoxUSER’S MANUAL173. LOCK3.1 Lock SystemSelect On or Off. If On is selected, a password is needed before you enteringthe menu.3.2 Set PasswordEnter a new password at the “New” item.Enter the new password again to confirm.
18 DTV Converter BoxUSER’S MANUAL3.3 Block ChannelSelect the desired channel you want to lock and press OK to confirm.3.4 TV Rating-ChildrenThis feature allows you to prevent children from watching channels.Age: TV-Y, TV-Y7 and Blocking Off.Fantasy Violence: Select TV-Y7 or Blocking Off.
DTV Converter BoxUSER’S MANUAL193.5 TV Rating-GeneralAge: TV-G, TV-PG, TV-14, TV-MA and Blocking Off.Dialogue: TV-PG, TV-14, TV-MA and Blocking Off.Language: TV-PG, TV-14, TV-MA and Blocking Off.Sex: TV-PG, TV-14, TV-MA and Blocking Off.Violence: TV-PG, TV-14, TV-MA and Blocking Off.
20 DTV Converter BoxUSER’S MANUAL3.6 Movie RatingG:General audiences.PG: Parental guidance suggested.PG-13: Parents strongly cautioned.R: Restricted.NC-17: No one 17 and under admitted.x:Adult only3.7 Downloadable RRT(Region Rating Table)
DTV Converter BoxUSER’S MANUAL21TECHNICAL SPECIFICATIONTTTUUUNNNEEERRR AAATTTSSSCCC Input frequency 54 ～ 864MHz Bandwidth 6M Input level -84 ～ 0dBm Input impedance 75Ω Signal Input: IEC Female(RF IN),IEC Male(RF OUT) TROUBLE SHOOTINGNote : If you cannot solve the problem by referring to the above trouble shooting,please contact your re-seller.PPPrrrooobbbllleeemmm PPPooossssssiiibbbllleee CCCaaauuussseeesss WWWhhhaaattt TTTooo DDDooo The display on the front panel does not light up. Main cable is not connected. Check that the main cable is plugged into power socket. No sound and picture, but the front panel shows time. The unit is in standby mode. Press the key on the RCU. No sound or picture. Poor signal quality or bad interconnections Check the antenna system Check cable connections. Bad picture/ Blocking error. Signal is too strong. Try a signal attenuator to the RF IN port. There is interference on your digital terrestrial channel. The system is connected using RF leads and the output channel of the receiver interferes with an existing terrestrial channel or Video signal. Change the receiver output channel to a more suitable channel. The RCU is not working. Battery exhausted. Change the battery.

Navigation menu