COSHIP ELECTRONICS 2007122901 DTV Converter Box User Manual N9900T p65

Download:
Mirror Download [FCC.gov]
Document ID	886169
Application ID	R9c2Iy9baCrYq0F2gX9IJw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	24.21kB (302631 bits)
Date Submitted	2008-01-05 00:00:00
Date Available	2008-01-11 00:00:00
Creation Date	2007-12-18 16:45:36
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2007-12-18 16:45:36
Document Title	N9900T.p65
Document Creator	PageMaker 6.5C
Document Author:	900127

USER’S MANUAL
WARNING/CAUTION
FCC
This device complies with Part15 of
the FCC Rules. Operation is subject
to the following two condition: (1)this
device may not cause harmful
interference,and (2) this device must
The lightning flash with ar
rowhead symbol, within
an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to
constitute a risk to persons.
accept any interference received,including interference that may cause
undesired operation.
NOTICE
Please be aware that new software may
change the functionality of the STB.
The exclamation point,
within an equilateral
triangle, is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
The photo and the function explanation
involved in this specification is for
reference only. If there is any mistake,
please refer to the entity.
Any changes or modifications not
expressly approved by the party
responsible for compliance could void
the user’s authority to operate the
equipment.
DTV Converter Box
USER’S MANUAL
SAFETY INSTRUCTIONS
Please read these safety instructions through carefully, before operating the receiver.
Please observe all warnings and instructions on the equipment and contained in
these operating instructions.
Be sure to read this
user’s manual before
starting your operation.
Install the unit
horizontally. Unbalanced installation may
cause the unit to be
damaged by itself.
Never open the cover.
It is very dangerous to
touch the inside of the
unit due to possible
electric shock.
Do not put heavy objects on the unit.
When you don’t use
this unit for a long time,
please pull the power
cord from the outlet.
Also do not use a damaged power cord.
When the unit is suddenly moved to a hot
area from a cold area,
it may cause prob
lems. In that case, turn
off the power, and turn
on after 1-2 hours.
Do not touch the power
withwet hand. If there
is liquid flowing into
the unit, pull out the
power cord immediately because it may
cause fire or electric
shock.
Install the unit in a
place with:
good ventilation
suitable temperature
no direct sunrays
low humidity
low vibration influence
Place the unit in a well
ventilated and no heat
environment.
2 DTV Converter Box
USER’S MANUAL
Table of Contents
2. OPTION
2.1 Clock
14
14
SAFETY INSTRUCTIONS
GENERAL INFORMATION
2.2 Aspect Ratio
2.3 Language
14
15
1. Main Features
2. Unpacking
2.4 Audio Language
2.5 Caption Select
15
15
OVERVIEW OF THE EQUIPMENT
2.6 DCC Setup
2.7 Sleep Mode
16
16
1. Front Panel
2. Rear Panel
2.8 Output Channel
3. LOCK
16
17
3. Remote Control Unit
4. Installation of STB
4.1 Connecting to TV using RCA Support
4.2 Connecting to TV using RF Support
3.1 Lock System
3.2 Set Password
17
17
3.3 Block Channel
3.4 TV Rating-Children
18
18
3.5 TV Rating-General
3.6 Movie Rating
19
20
3.7 Downloadable RRT
20
FIRST STEPS
TECHNICAL SPECIFICATION
21
MENU INFORMATION
TROUBLE SHOOTING
21
ON SCREEN MENUS SELECTION
10
1. Main Menu
10
2. Channel
1.1 Channel Scan
11
11
1.2 Channel Add
1.3 Channel Edit
12
12
1.4 Manual Scan
1.5 Smart Antenna
13
13
DTV Converter Box
USER’S MANUAL
GENERAL INFORMATION
Incorporating the highly integrated
™
Multi-language OSD (English,
single chip, the receiver is a costeffective and high performance digi-
French, Spanish)
tal ATSC converter box. The receiver
provides FTA (Free-To-Air) channels
™
Multi-language audio supported
with user-friendly OSD (On Screen
Display)
™
Multi-language Subtitle output
supported
™
1. Main Features
™
EIA 608 Closed Caption
™
Parent control (V-chip)
Fully ATSC / MPEG -2 HD
compliant
™
Receives HD ATSC Terres-
trial broadcast Channels 2-69
™
Decodes all 18 ATSC DTV
standard formats
™
256 colors on screen display
2. Unpacking
Unpack the receiver and check to
make sure that all of the following
items are included in the packaging.
(OSD) supported
™
1 x Remote Control Unit
™
™
™
1 x User’s Manual
1 x Digital Terrestrial Re-
7 days Electronic Program
Guide (EPG)
™
Teletext output through VBI
and OSD
4 DTV Converter Box
ceiver
USER’S MANUAL
OVERVIEW OF THE EQUIPMENT
1. Front Panel
change to the previous channel
Remote Control Sensor
change to the next channel
switch between operation and standby modes
DTV Converter Box
USER’S MANUAL
2. Rear Panel
Right audio
VIDEO
Main power
switch
Left audio
UHF RF output to TV set’s antenna in
Connect to terrestrial antenna
6 DTV Converter Box
USER’S MANUAL
3. Remote Control Unit
Function
Function
MUTE
13
Signal Strength
CC
14
Page+
Numeric Key
15
Page-
Reserved for future use
16
GUIDE
Sleep Mode
17
INFO
AUDIO
18
Flash Back
MENU
19
RATIO
ARROW
20
EXIT
VOL+
21
OK
10
VOL-
22
CH+/Page+
11
DASH(-)
23
CH-/Page-
12
STANDBY
DTV Converter Box
USER’S MANUAL
4. Installation of STB
This section explains the installation of the STB. If you need any assistance for
specific equipment connection, please contact your local dealer.
4.1 Connecting to TV using RCA Support
4.2 Connecting to TV using RF Support
8 DTV Converter Box
USER’S MANUAL
FIRST STEPS
Insert the receiver’s plug in the power socket.
the receiver starts up in Standby mode. On the display the current time is shown.
Insert the plugs of the auxiliary equipments in the power socket and switch them on.
Select the AV channel on the TV set.
The receiver is delivered with pre-programmed TV channels and can be used
immediately. To see if there are any new channels, then activate the channel search.
Caution!
Check the connections of all equipment and the antenna are in working order before
connecting the receiver to the power source.
MENU INFORMATION
The user interface has various ways to navigate through the menus and functions.
Some of the keys on the remote control unit give direct access to functions. The most
important keys are identified as EPG, colored keys, MENU and OK. Other keys are
multi-functional which means that their function changes dependent of the mode
that you are in.
Unless otherwise specified; this note explains the way you can navigate through the
pages of the user menu.
1. Use the
keys to move the cursor left or right from one line to another line.
2. Use the
keys to move the cursor up or down in the sub-menu.
3. Use the OK key to enter the sub-menu.
4. Use the EXIT key to leave the menu and return to the view mode.
5. In a sub-menu:
-use the OK key to confirm the selection;
-the green or white bar indicates the active selection
DTV Converter Box
USER’S MANUAL
ON SCREEN MENUS SELECTION
1. Main Menu
Pressing the MENU key will display the Main Menu. This menu provides three options.
CHANNEL
OPTION
LOCK
10 DTV Converter Box
USER’S MANUAL
2. Channel
1.1 Channel Scan
From here, select key or OK key to scan the channels.
During the searching process, OK key is used to cancel the whole process.
CHANNEL
Channel Scan 1
Channel Scan 2
Channel Scan 3
DTV Converter Box
11
USER’S MANUAL
1.2 Channel Add
key or OK key to lead you to the channel add.
1.3 Channel Edit
Press OK to delete or add the selected channel.
12 DTV Converter Box
USER’S MANUAL
1.4 Manual Scan
In this mode, only one RF channel can be searched. You can use the function
to scan the desired channels. Press keys to select the RF-channel number.
1.5 Smart Antenna
Select CH2 or CH3.
DTV Converter Box
13
USER’S MANUAL
2. OPTION
2.1 Clock
Current Time: Displays the current time.
Time Zone: Select proper option according to the time zone you have been.
2.2 Aspect Ratio
This option allows you to select the aspect ratio of the video output.
14 DTV Converter Box
USER’S MANUAL
2.3 Language
Select the desired language for menu.
2.4 Audio Language
This option allows you to select your first and second choice for the audio
language.
2.5 Caption Select
Select the desired option for caption.
DTV Converter Box
15
USER’S MANUAL
2.6 Sleep Mode
Sets the time after which the receiver switches itself off.
16 DTV Converter Box
USER’S MANUAL
3. LOCK
3.1 Lock System
Select On or Off. If On is selected, a password is needed before you entering
the menu.
3.2 Set Password
Enter a new password at the “New” item.
Enter the new password again to confirm.
DTV Converter Box
17
USER’S MANUAL
3.3 Block Channel
Select the desired channel you want to lock and press OK to confirm.
3.4 TV Rating-Children
This feature allows you to prevent children from watching channels.
Age: TV-Y, TV-Y7 and Blocking Off.
Fantasy Violence: Select TV-Y7 or Blocking Off.
18 DTV Converter Box
USER’S MANUAL
3.5 TV Rating-General
Age: TV-G, TV-PG, TV-14, TV-MA and Blocking Off.
Dialogue: TV-PG, TV-14, TV-MA and Blocking Off.
Language: TV-PG, TV-14, TV-MA and Blocking Off.
Sex: TV-PG, TV-14, TV-MA and Blocking Off.
Violence: TV-PG, TV-14, TV-MA and Blocking Off.
DTV Converter Box
19
USER’S MANUAL
3.6 Movie Rating
G:General audiences.
PG: Parental guidance suggested.
PG-13: Parents strongly cautioned.
R: Restricted.
NC-17: No one 17 and under admitted.
x:Adult only
3.7 Downloadable RRT(Region Rating Table)
20 DTV Converter Box
USER’S MANUAL
TECHNICAL SPECIFICATION
TU
UN
NE
ER
AT
TS
SC
Input frequency
54 ～ 864MHz
Bandwidth
6M
Input level
-84 ～ 0dBm
Input impedance
75Ω
Signal Input:
IEC Female(RF IN),IEC Male(RF OUT)
TROUBLE SHOOTING
Note : If you cannot solve the problem by referring to the above trouble shooting,
please contact your re-seller.
Prrro
ob
bllleeem
Po
ossssssiiib
bllleee C
Caaau
ussseeesss
The display on the
front panel does not Main cable is not connected.
light up.
No sound and picture,
but the front panel The unit is in standby mode.
shows time.
Poor signal quality or bad
No sound or picture.
interconnections
Bad picture/ Blocking
Signal is too strong.
error.
The system is connected using
RF leads and the output
There is interference
channel of the receiver
on
your
digital
interferes with an existing
terrestrial channel.
terrestrial channel or Video
signal.
The RCU is not
Battery exhausted.
working.
Wh
haaattt T
To
oD
Do
Check that the main cable
is plugged into power
socket.
Press the
RCU.
key on the
Check the antenna system
Check cable connections.
Try a signal attenuator to
the RF IN port.
Change the receiver output
channel to a more suitable
channel.
Change the battery.
DTV Converter Box
21

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PageMaker 6.5C
Modify Date                     : 2007:12:18 16:45:36+08:00
Create Date                     : 2007:12:18 16:45:36+08:00
Format                          : application/pdf
Title                           : N9900T.p65
Creator                         : 900127
Document ID                     : uuid:3cc504d4-dee2-4545-9fe9-9d7d7b58129e
Instance ID                     : uuid:c8b35dce-3b71-4f9f-b61a-cf65147ab153
Page Count                      : 21
Author                          : 900127

EXIF Metadata provided by EXIF.tools