CRE Electronic Technology X3001 Projector User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3370943
Application ID	eTuCTJkzHoy2B/n2gcqtTQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	208.73kB (2609074 bits)
Date Submitted	2017-04-25 00:00:00
Date Available	2017-04-25 00:00:00
Creation Date	2017-04-20 15:25:31
Producing Software	Adobe Acrobat Pro 9.0.0
Document Lastmod	2017-04-20 15:25:31
Document Title	Users Manual
Document Creator	Adobe Acrobat Pro 9.0.0
Document Author:	Administrator

CHUANGRONG
CRE Multimedia Projector
Manual
Add: A5/F, Block A3, Jinrong Tongxin High-tech Park,
Wanglei Road, Yuelu District, Changsha City,
Hunan Province, China
Web: www.creprojector.com
Tel: +86 731-83751062
CRE Electronic Technology Co., limited, Hunan, China
Accessories
●
Projector------------- --- 1pc
●
Instruction Manual -------------- 1pc
●
Power Plug -------------- 1pc
●
Remote Control ----------- ------ 1pc
●
HDMI Cable--------------1pc
●
4 Bolts for Fixing -------------- - - 4pcs
Directory
Chapter 1, Overview
Chapter 1
Overview ----------------- 01
Overview
Top/Right Side Overview
Chapter 2
Equipment connection Settings
----------- 03
Focus
( Adjust definition)
Zoom
(Adjust screen size)
Chapter 3
Android Desk ------------- 06
Left and Right Heat Vent
(pls do not cover it)
Chapter 4
External channel (OSD) Setting
----------- 12
Chapter 5
Bottom Overview
Projection Image
Height Adjustment
Heat Emission Hole
(Don’t cover)
Maintenance -------------- 13
Tilt Adjustment Knob
Rotate it to adjust the
left and right height of
the projection image)
Installation Diagram
Follow it to install )
product specification
01
Importance:
Back Overview
HDMI-2
USB3.0 USB2.0
Audioout
Audioin
VGA Computer
Internet connection
HDMI-1
Rj45
Adapter
Battery
TF Card
Video Input
Antitheft Lock
1. Make sure no obstacle between remote control and projector. If there is obstacle between
them, remote control signal may be reflected back by the particular surface ,which will
affect operation.
2. Buttons and keys on projector have the same function with buttons of remote control.Our
manual introduces functions based on remote control.
Chapter 2
Equipment connection Settings
Warning: To be safe, cut power between projector and relative equipment before
connect projector cable.
Key Overview
Power
Direction &
Enter
3D Multifunction Key
IR Sensor
Select the Signal for the Projector
When you connect projector with different equipment,you should
choose corresponding input channel on main interface.
Otherwise,there will have no image to be projected out.
1.Choose the connection input channel.by direction key
2.Press Ok to confirm
3.Press Return key to last step
Projector Connection Setting
MENU
Return Key
Indicator Light
Connect with HDMI device
Use HDMI cable to connect projector with HDMI device.
Remote Control Overview
Voice -
3D Multifunction
Key
Enter
Menu
Connect with Personal Computer
Use VGA cable to connect projector with personal computer.
Voice +
02
product specification
Return
Main Interface
Direction
On/Off
Note：
PC must have a VGA output port, then you can use VGA cable to connect projector.
product specification
03
Insert USB flash driver T /
F card
Insert the storage device into the corresponding port, then the USB flash driver/TF card
will be connected to the projector..
Turn on/
off the Projector
1.Connect one end of the power cord to the
wall power supply socket (A), and the other
end connected to the three hole socket (B)
of the projector.
2.Press remote control button
or press button
“ POWER” to turn on /off the projector
Adjust Image
Using image focusing control button (Located
on the side of the projector)
Connect the Video
Connect the video equipment to the projector by video cable.
Adjust the projected image sharpness(A).
Using image zoom control button (Located on
the side of the projector)
Adjust the projected image size (B).
Set the Remote Control
The remote control is equipped with a 3V lithium battery
(CR2032). Battery was pre-installed in the remote control.
If shipping way does not support battery, you need to buy it.
Before using the remote control, take out the plastic
sheet from the battery compartment.
Change Remote Control battery
1.Toward the direction of arrow ,move and pull out of the cover.
Connect the Audio
Insert earphone or 3.5mm audio cable to the projector audio output ,insert the audio cable
2.Remove the old battery, install new battery(the positive upward).
3.Fit on battery’s cover.
from DVD , Set Top Box or other signal devices to the audio input .Then there will be audio
Note：
out to the earphone or external mini speaker.
1. Can only use 3V lithium battery (Cr2032 )
2. In accordance with the relevant local regulations dispose the waste batteries.
3. The battery should be taken out if you do not use the equipment for long time.
The remote control controls the projector through the infrared transmission . Remote
controlling the radius of about 7 m (23 ft) and above or below projector’s range of 15
degrees ,it can work normally (but the remote control can not be perpendicular to the
bottom of the projector ).
If the projector does not response to the remote control instruction, please move it near
to the projector.
04
product specification
product specification
05
Chapter 3,Android Desk
supported formats
Document browser can open the following types of documents:
Overview
MS office word ver97/2000XP/2003/2007/2010
MS office Excel ver97/2000XP/2003/2007/2010
MS office PPT ver97/2000XP/2003/2007/2010
Adobe PDF 1.2/1.3/1.4/1.5/1.6/1.7
TXT text
Epub
CHM
HTML
Image files (bmp gif png jpeg)
View the document
HDMI VGA CVBS – An external device fast connection
To open a document file in a browser,please follow these steps:
Office – Some commonly used office document browser
Movies – Some commonly used network player
Application – All applications after installation
Setting – Projector and system settings
File Browser – Browse the mobile device resource
Video,Music,Picture – Play the corresponding file in the mobile storage device
Screen Tools
1.Click the button ” menu” at the upper left corner
Click the left corner at the bottom of the screen
return
backstage
2. Click the button of ”open”
hide
3. Select file storage device
homepage
volume control
4. Select a file
turn off
multi-function key, you can
set the 3D format,image,
sound and light working modes
connection status
5. Open the file and browse
Settings
Office document browsing
06
product specification
product specification
07
App settings
Language settings
Setting the location of app installation
App management
System confirmation/ SD card / internal storage
Start up / unload / clear data
Network settings
Wireless network settings
Wired network settings
Language settings
Modify system language
Modify the default input method
Modify the input methods of keyboard
Audio settings
Select the network you want to connect, Open the wired connection and select
enter the password and click save,
auto IP or connect to IPv6 protocol
it will connect the network automatically.
08
product specification
Switch
Set the sound output on / off
High voice
Audio treble setting 0-100
Low voice
Audio bass setting 0-100
Balance
Set the left and right speaker volume balance 0-100
Spdif
Set audio interface signal output type
product specification
09
Support following music file formats:
Projector settings
MP3, WMA, WAV, OGG, FLAC, AAC, LC-AAC, APE
Support following image file formats:
JPG/JPEG, BMP, PNG,TIFF, GIF
Support following video file formats:
RM/RMVB, AVI, TS, M2TS, MTS, MKV, MOV, FLV, DVD-ISO,
BD-ISO, VOB, MPG, DAT, ASF,TP, TRP, WMV, IFO, SWF, 3GP,
EVO, DIVX, MP4, OGM
Multi- screen interaction
Brightness
Saving mode / highlight mode / office mode
Projection
Front projection / rear projection / upside down front
projection / upside down rear projection
Keystone correction
Keystone correction
Temperature
0°-70°
manual correction ± 100
Android Series
System Settings
ISO Series
Choose the corresponding application icon to enter, according to the
following ways to connect.
Common android mobile phone wireless screen mirroring setup steps：
Settings - > Settings - > more Allsharecast
Samsung
Desktop settings
Modify the desktop background picture
Date time setting
Modify the system time
About
Display system information
HTC
Settings - > media output
Xiaomi
Setting - >more wireless connection - > wireless display
Huawei
Settings - > display - > wireless display
Lenovo
Settings - > display - > wireless display
Apple's IOS system setup steps
Airplay - > Search equipment - > Connection - > Click on the mirror image - >
Click finish
Playing mobile stored devices
When you want to play a file in a mobile device,please select
the correct type of window and enter.
Resource manager
Music
Browser or play all types of files
Only play the supported formats of music file
Album
Only play the supported formats of pictures
Video
Only play the supported formats of videos
10
product specification
Note：
Using equipment and projection must work in the same network conditions.
Use the wireless screen mirroring function, the mobile phone devices should
support with screen function, and setup the devices in correct way .
product specification
11
Chapter 4
External channel (OSD) Setting
OSD menu control
The projector external channel has screen display (OSD)setup menu
can be used to adjust and change the settings.
Note：
Some parameters need to adjust it in user mode.
Because of the different signal sources, OSD items could be settled will be
different . For example, when the projector is connected to PC via VGA , user can
alter the " "horizontal position/vertical position" of "picture> PC image adjust" menu.
If connected to other signal source , this setting could not be changed and
display by gray color.
Four submenu in OSD menu :
Picture- Adjust the image quality in this menu.
Sounds - Adjust sound effect in this menu.
Chapter 5, Maintenance
Setting - Adjust menu display time in this menu.
Cleaning the Projector
Time - Setting automatic switch time.
Cleaning the projector to remove dust and grime will help running normally.
If you want to to adjust the Settings menu,
please perform the following steps:
Warning:
1 . Before cleaning, turn off the projector and unplug the power cord. Otherwise,
it may result in injury or damage to the system.
▲
1. Press
key to enter the OSD menu and
then press
choose the menu need to setting.
2. When cleaning ,you should only use a damp cloth . Do not allow water to enter
the ventilation of the projector.
4. Press
or
▲
3. Press
▲
2. Press ▲ or ▼ button，choose the item need
to adjust and then press OK to entry.
3. If a little water enter the interior of the projector when cleaning, please don’t
connect the projector to power ,the projector should be placed in a well ventilated
area for several hours before using.
button set parameters.
to save setting.
Cleaning the Lens
Item
Picture mode
Color Temperature
Zoom Mode
Instructions
Setting picture display mode,adjust picture effect.
(User,Bright, Standard Soft )
Adjust the image display different color temperature.
(standard warm cold)
Adjust the image display aspect ratio.
(Automatic point-to-point 16:9 4:3)
Image noise reduction
Setting reduce noise level
(Low Middle High Automatic Off)
MPEG noise reduction
Setting reduce noise level (Low Middle High
Off)
PC iamge adjust
Setting reduce noise level (Low Middle High
Off)
Cleaning fluid of optical lens can be purchased from most camera stores and other
retail shops. To clean the projector lens, perform the following steps:
Note：
1. Do not use abrasive cleaners or solutions.
2. To prevent discoloration or fading, do not let the cleaning liquid contact projector
cabinet.
Simple Troubleshooting
The operation of the machine is very simple , generally in use will not encounter any
problems . Sometimes on the operation and connection of peripheral equipment of the
machine will caused by some fault illusion, please refer to the following for
troubleshooting. If malfunction cannot be solved in the end, please contact the
company's after-sales service.
After-sales service no：+86 731-83751062
12
product specification
product specification
13
After connecting the devices, you can use the projector media channel display
images.
Problem of no Image
Use another electrical device to confirm the power socket is normal.
5. What kind of cables will be needed to connect video equipment to the projector?
Ensure the projector is turned on.
If the video device configured the appropriate port, you can use the audio/
video cable or HDMI cable to connect it to the projector. If you want to play
audio, RCA cable can also be connected to the projector.
Make sure all connections are secure.
Make sure selected the correct signal input source.
Make sure the connected device is turned on.
Ensure a connected PC is not in suspend or sleep mode.
Distance and Screen Size
Make sure the laptop is configured with external display correctly.
Problem of Remote Control
Problem: The projector does not respond to remote control commands.
Image Height
1. Point the remote control at the remote sensor of the projector.
2. Make sure there are no obstructions between the remote control and the sensor.
3. Turn off the fluorescent lights in the room.
4. Check the battery polarity.
Keystone Angle
5. Replace the battery.
6. Turn off other equipment infrared enabled in the near region.
Distance
7. Send remote control for repair.
FAQ
1. Can the projector be used together with PC, notebook or netbook?
Yes. Use a VGA cable or HDMI cable that comes. If there is a corresponding
HDMI or VGA port on the PC, laptop or netbook, the projector can connect to
these devices. To play the audio, you need a stereo audio cable to connect the
projector’s audio jack.
®
2. Can the projector be connected to a game console, such as Microsoft Xbox or
®
Sony PS3?
Yes. The projector can display content from the Xbox or PS3 console. Just use
the HDMI cable to connect the game console with the projector.
3. Can the projector project the content from TV?
TV can generate image on its own screen. If you want to watch TV content,
then need to connect a cable box, digital set-top box or satellite receiver. For
example, if you use a cable box, you can connect it to the projector via the
video cable or HDMI cable.
4 .How to display images from a digital camera or USB flash driver?
By connecting the following devices to the projector, you can display the
corresponding image or other content:
USB flash driver , hard disk , card reader
Digital camera
Image Size
(Inch)
Projection Distance
Max/Min (m)
50
1.41--1.55
1.077*0.673
60
1.70--1.87
1.292*0.807
70
1.99--2.19
1.507*0.942
80
2.28--2.50
1.723*1.077
100
2.86--3.15
2.153*1.346
120
3.43--3.78
2.584*1.615
150
4.30--4.74
3.230*2.019
200
5.75--6.33
4.307*2.692
Projection Area
(㎡)
Disclaimer:
Our company reserve the right to make changes to the contents of this instruction manual
without any advance notice.
Continuous upgrading of the software may bring some differences to the OSD operation
menu and the picture of this instruction manual , but does not affect the normal operation
of the functional operation described in this instruction manual. We are sorry if this brings
inconvenience to you , please kindly understand .
Smart phone
Media storage browser
14
product specification
product specification
15
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2017:04:20 15:25:31+08:00
Modify Date                     : 2017:04:20 15:25:31+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2017:04:20 15:25:31+08:00
Creator Tool                    : Adobe Acrobat Pro 9.0.0
Format                          : application/pdf
Title                           : 短焦安卓系统说明书英文版
Creator                         : Administrator
Document ID                     : uuid:b5fb4061-3c78-4e17-bf7f-1d97d177dc14
Instance ID                     : uuid:d7c0c8f5-216e-4074-87c4-d84b0b10b240
Producer                        : Adobe Acrobat Pro 9.0.0
Page Count                      : 10

EXIF Metadata provided by EXIF.tools