CTECH SCIENCE and TECHNOLOGY X501 Bluetooth Keyboard User Manual
SHENZHEN CTECH SCIENCE & TECHNOLOGY CO. LTD Bluetooth Keyboard
user manual
Bluetooth Keyboard FCC ID : PD8X501 Model:X501,X502,X503,X504,X505,X506,X507,X508,X509 User’s Manual Usage Instructions: 1. Place your iPad in the Bluetooth keyboard. 2. Turn on your Bluetooth keyboard. The On/Off switch is located on the bottom right side of the keyboard. On/Off Switch *The built-in lithium battery supports 120 hours of continuous typing when fully charged. *Please charge the keyboard with the included USB cable. *For first time use, please charge for 12 hours. After first time use, charging usually takes about 4 hours. A: CAPS LOCK Indicator Light * When CAPS LOCK is on, the light will turn white. B: Power Indicator Light * When the keyboard’s battery is low, the light will flash yellow. * When the keyboard is being charged, the light will turn red. * When the keyboard battery is fully charged, the light will turn green. C: Bluetooth Light * When the Bluetooth button is activated during pairing, the light will continually flash until pairing is successfully completed. Pairing Your Bluetooth Keyboard: 1. Press the Bluetooth button to send a Bluetooth signal. 2. Turn your iPad on and select “Settings”---“General”---“Bluetooth”. 3. Slide the Bluetooth to “On” and your iPad will start to search for Bluetooth devices. 4. When “Bluetooth Keyboard Case” shows up on your list of Bluetooth devices, select it to begin pairing. 5. Enter the password shown on the blue window and press “Enter” on the keyboard. *Pairing is only needed for the initial setup. After your first successful connection, the keyboard will connect automatically to your iPad when powered on. About the Keyboard: + Language Switch Copy Paste Cut Redo To the top of the text To the end of the text Delete the whole line Shift Select text rightward Shift Select text leftward Shift Select text upward Shift Select text downward Specifications: Bluetooth: Operation Current: Standby Current: Operation Voltage: Charging Voltage: Battery Type: Charge Time: Version 3.0 <1.5mA <0.5mA 4.2V 110-240V Lithium Battery 2 hours (For first time use, please charge for 12 hours) Troubleshooting: If you are unable to connect the keyboard to your iPad, please try the following: z Check if the battery is low. When the battery is low, your keyboard will not function properly. Please recharge the battery. z Check the power switch and make sure it is on. When powered on, the power light on the bottom right of the keyboard will flash for two seconds z Restart Bluetooth, and make sure your iPad can find this device z Ensure the password for pairing is correct. IMPORTANT REGULATORY INFORMATION This device complies with Part 15 of the FCC Rules: Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference that is received, including any interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res XMP Toolkit : 3.1-702 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2012:08:28 09:52:40+08:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2012:10:17 17:47:43+08:00 Metadata Date : 2012:10:17 17:47:43+08:00 Format : application/pdf Creator : Administrator Title : Microsoft Word - 3007 User Manual说明书2011-08-14.doc Document ID : uuid:dc1cbd8f-cdb1-4f88-be97-a9a7e1c6c2e9 Instance ID : uuid:795e2f8e-f769-4aa9-8ae3-394a5d74ecfa Page Count : 6 Author : AdministratorEXIF Metadata provided by EXIF.tools