Cabco Group 2008-KART SHOPPING KART TRANSMITTER User Manual 2008 Controllers kart managers guide

Cabco Group SHOPPING KART TRANSMITTER 2008 Controllers kart managers guide

USERS MANUAL

Download: Cabco Group 2008-KART SHOPPING KART TRANSMITTER User Manual 2008 Controllers kart managers guide
Mirror Download [FCC.gov]Cabco Group 2008-KART SHOPPING KART TRANSMITTER User Manual 2008 Controllers kart managers guide
Document ID947938
Application IDKHvzhUrlbofm5s4+c/GWAQ==
Document DescriptionUSERS MANUAL
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize60.49kB (756169 bits)
Date Submitted2008-05-28 00:00:00
Date Available2008-05-28 00:00:00
Creation Date2008-05-27 13:09:11
Producing SoftwareAcrobat PDFWriter 5.0 for Windows NT
Document Lastmod2008-05-27 13:10:01
Document Title2008 Controllers-kart managers guide.doc
Document Creator2008 Controllers-kart managers guide.doc - Microsoft Word
Document Author: Andrew_C

Kart Managers Guide
2008 Generation III Controllers
Contents
Section 1-Controller hardware descriptions
Section 2-Service mode functions and screen shots
Introduction
This document describes the new controller hardware items and shows the new
functionality of the service mode.
All other general kart functions remain the same.
• No unauthorised modifications to the equipment are allowed.
• Such modifications may cause radio and television
interference which could void the user’s authority to operate
this equipment.
Section 1
Generation III Controller- Hardware Items
Each controller is housed in a die cast aluminum box. There are between 2 & 4 circuit
boards contained in each controller box depending on the required use and specification.
Stand Controller
The stand controller has 3 circuit boards.
The controller is powered by a 24v supply.
On the left is the main controller with built in 2.4Ghz RF module.
On the right is the digital media player which supports both SD & CFC.
The small middle PCB supports a printer interface.
The connectors on the stand controller from left to right are:
1.
2.
3.
4.
5.
6.
7.
8.
2-way power supply
6-way for future hardware
8-way for future hardware
12-way connector for service mode button, 7” LCD power + audio and stand soft
key buttons.
Lower connector is Data cable to Harvest
Upper connector is printer.
RF antenna port
RCA video output
The stand houses a 7” LCD monitor similar to the children’s and the media monitors.
Mounted either side of the monitor are 6 switches called “soft keys”.
These switches are mounted on small circuit boards with connectors to the stand
controller.
These connectors can be used on either left or right circuit board.
The monitor is connected to an 8-way DIN cable which has RCA connectors to the stand
controller.
The red video 3 connector is not used & the white audio RCA may/not be used depending
on the end application.
Kart Controller
A kart controller incorporating a media monitor will contain 4 separate circuit boards.
1. Main kart board incorporating a 2.4Ghz RF module
2. Children’s digital media player
3. Media monitor DMP.
4. Battery charging board.
A controller may be made with just the children’s DMP.
The battery charging board will differ for IPT & contact charging.
The connectors on a kart controller from left to right are:
1.
2.
3.
4.
5.
6.
7.
8.
9.
Top 4 –way is the power connector
Left side 6-way is the trunk LED & future “gas gauge”
12-way mini fit is for the brakes
12-way micro fit is for 2x monitor DIN connectors, 2x monitor audio (RCA or
spade) and 2 pin connector to the media monitor switches.
8-way connector to brake release & sensor
10-way for future hardware
2.4Ghz RF antenna
top yellow RCA is for media monitor
lower yellow RCA is for children’s monitor
On the right side of the controller , with the connectors facing you, there are slots for the
media cards.
The children’s DMP is the lower slots, we use a CFC for this.
The media monitor is the top slot, we use an SD card on this.
Section 2-Cabco Stand Service Mode Screens
Generation III controllers
Service mode is entered by pressing the service mode button which is found on
the inside roof of the lower section of the Kart Pay Station.(same as tvkart V1)
Service mode allows access to any cash totals, kart set up, store settings and
media settings.
The following screen shots show the detail of all functions.
Main Menu Page 1
Welcome to Service mode.
Select an option…
Free Hire
Exit
Unhire
Cash Settings
Stand Summary
More
Free Hire-starts a kart on “hire mode”-used to start a hire & to test a kart
Unhire-stops a kart already in “hire mode”
Stand Summary-shows cash and software running in stand
Exit- exits to “public menu”
Cash settings-shows cash and onto clear cash screens
More- moves to the next Service main page 2
Unhire a Kart
Select an option…
Next
Kart 1
Kart 2
Exit
Stand Summary
Total
Recent
In cash Box
Total Hires
Free Hires
: $0.00/0
: $0.00/0
$0.00
Exit
Softwar
Ver
3.09
185D
Ver
3.02
Cash Settings
Cash Box : $0.00/0 Exit
Clear Cash
Free Hires
Box
Hire Cost
Down
Up
$1.00
Main Menu Page 2
Main Menu 2.
Select an option…
General Settings
Exit
Log
Kart Control
History
Store Kart
More
Summary
General Settings-displays all store “general settings”
Kart control-allows control of a single kart
Store Kart summary-shows the “status” of all karts in a store
Exit-exits back to first page
Log History-shows a simple log file of recent actions performed by the stand
More-goes to next page
Main menu 2
General Settings
General Settings
Find Karts
enabled
Exit
Updates enabled
Kart
Delays
Parent Screen
enabled
Volume
Find karts enabled-will “look” for any karts in range.
Updates disable/enabled-will disable or enable stand to kart code updates
Parent screen enable -turns off controller media screen
Exit- exits to previous page
Kart delays-enables changes all “time settings”
Volume-allows changes to all volume settings
Kart delays 1…
Next
Down
Down
Up
Up
Exit
First Ad Time 60
Time Between
Ads 600 s
First ad time-is the time after hire start time that the first ad plays
Time between ads-is the time gap between ads playing
Next-to kart delay page 2
Exit-back to first General Setting page
Kart delays 2…
Next
Down
Down
Up
Up
Exit
Mat Turn Off
Time 400 s
Minimum Hire
Ads 600 s
Mat turn off-is the time that the kart will stop a hire if it sees its still on the mat
after hire
Minimum hire-is the time after hire hat the sensor will turn on.
Exit-goes back to General Settings main page
Next-goes to Kart delays page 3
Kart delays 3…
Next
Down
Down
Park Time 120 s
Exit
Up
Up
Exit
Up
Up
Park time- is the time from sensor trip to brakes on
Next-goes to kart delays page 1
Exit- goes back to General settings main page
Volume Control
Down
Down
Parent Volume 4
Child Volume 18
Parent volume-sets the media monitor volume across all karts in the store
Child volume-sets the children’s monitor volume across all karts in the store
Exit-goes to General settings main page
Main Menu 2
Kart Control
Select a Kart
Exit
Kart 3
Exit
Statistics
Kart Errors
Next
Kart 1
Kart 2
Next-goes to next page if you have more than 4 karts
Kart 1, 2, 3 -selects the chosen kart
Exit-goes back to Main menu page 2
Kart 1 Setup
Kart Config
State:
Charging
Manual
Control
Kart config-displays kart “in store” trunk number
State-shows the current “state” of kart
Manual control-allows hire/unhire of kart & code upgrades
Exit-goes back to Main menu page 2
Statistics-shows kart code & full status detail
Kart errors-shows recent errors in kart func tion
Kart 1 Config
?
Cancel
Commit
Type-NICK
Parent: ON
Down
Number: 5
Up
Kart 1 Status
State : Charging
Last Ride Time : 0:00:00
Charge Time : 1:35:02
Battery Volts
Battery Current
Charge State
Last Report Time
Exi
13.6 V
0.0 A
100 %
Mon Jan 15 21:32:46
Kart 1 Manual Control
State : Charging
In Service
Exit
Unhire Kart
Enable
Maintenance
Upgrades
Kart 1 Statistics
Total cash : 0.00/0
Current State Time 0:00:00
Exi
:
Total Idle Time :
Total Out Of
Service Time :
Total Hire Time :
Charge Time :
Average Hire :
Hire Counter :
Utilization :
1:19:52
1.6
17:3
0:40:38
0:30:03
4/0
9.00 % Versio
ns
Unavailable : 0.08%
Kart 1 Software Versions
Kart Software
Version :
Parent DMP Version
Child DMP Version
3.09
3E95
3.02
3.02
Exi
Kart 1 Error Status
Solenoids OK
Exit
Main Menu page 2
Store kart summary
Store Kart Summary
Kart 1 IdleOOR
Kart 2 Hired
Kart 3
Charging
Kart 4 Idle
71%
98%
100%
100%
Shows “status” of all karts known by the stand
Exit-goes back to Main Menu page 2
More-shows additional karts
Main Menu page 2
Log History
V3.08
V3.08
V3.08
V3.06
Exit
More
Log History
Wed Jan
Hire
Wed Jan
Unhire
Wed Jan
Hire
Wed Jan
Found
Wed Jan
Found
Wed Jan
Found
Wed Jan
Init
Wed Jan
Reset
17 12:09:18 Kart 1
Exit
Up
17 09:47:20 Kart 2
17 09:06:18 Kart 2
17 08:36:24 Kart 2
17 08:36:16 Kart 1
Down
17 08:36:26 HSN
17 08:36:16 Log
17 08:35:66 Zigbee
Shows recent logs of all store karts
Exit-goes back to Main menu page 2
Main Menu page 2
More
Welcome to Service mode.
Select an option…
Remove Kart
Exit
Back
Exit
Kart 3*
Remove kart-allows you to remove a kart from the store
Remove a Kart
Next
Kart 1
Kart 2

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Create Date                     : 2008:05:27 13:09:11Z
Modify Date                     : 2008:05:27 13:10:01+12:00
Page Count                      : 19
Creation Date                   : 2008:05:27 13:09:11Z
Author                          : Andrew_C
Producer                        : Acrobat PDFWriter 5.0 for Windows NT
Mod Date                        : 2008:05:27 13:10:01+12:00
Metadata Date                   : 2008:05:27 13:10:01+12:00
Title                           : 2008 Controllers-kart managers guide.doc
Creator                         : Andrew_C
EXIF Metadata provided by EXIF.tools
FCC ID Filing: SN9-2008-KART

Navigation menu