Cadi Scientific SMN900 SmartNode User Manual

Download:
Mirror Download [FCC.gov]
Document ID	872843
Application ID	btzngEYp2S4/8Kwr7xT0JQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	24.62kB (307800 bits)
Date Submitted	2007-11-28 00:00:00
Date Available	2007-11-28 00:00:00
Creation Date	2007-11-28 10:54:49
Producing Software	GPL Ghostscript 8.15
Document Lastmod	2007-11-28 10:54:49
Document Title	Microsoft Word - SMN-800 900 SmartNODE User Guide ver 2.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	nghoncheong

SMN-800/900 SmartNODETM
RFID Receiver
User Guide
Cadi Scientific Pte Ltd
Federal Communications Commission (FCC) Statement
15.21
You are cautioned that changes or modifications not expressly approved by the part
responsible for compliance could void the user’s authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference that may cause undesired
operation of the device.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF
exposure compliance. This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
COPYRIGHT
Specifications are subject to change without notice. Copyright © 2003 Cadi Scientific Pte Ltd.
All rights reserved.
Cadi Scientific Pte Ltd
1003 Bukit Merah Central
#04-40
Singapore 159836
Singapore
http://www.cadi.com.sg
Cadi Scientific Pte Ltd
Introduction
The SMN-800/900 SmartNODETM RFID Receiver is an integral component of the
SmartSense Wireless Vital Signs and Location Tracking System. The system is
designed for wireless and automated measurement and recording of patient vital
signs and for location tracking of patients and high-value assets.
The SMN-800/900 SmartNODETM RFID Receiver is a LAN-enabled receiver for
receiving data transmitted by the SmartSenseTM series of wireless sensors and
monitors.
The receiver uploads data received from the sensors to the
SmartSenseTM database via its built in Ethernet LAN interface.
In a typical installation, the receivers are to be installed at strategic locations in the
hospital in a manner to meet the specific coverage requirement of the application.
The receivers being Ethernet LAN capable lend themselves well to deployment
using standard Ethernet LAN equipment and infrastructure.
Cadi Scientific Pte Ltd
Typical System Setup
The following diagram shows how SMN-800/900 is deployed in a typical
SmartSense System configuration.
AC Outlet
Ethernet
Power
Ethernet
Server
Network Switch
Cadi Scientific Pte Ltd
Specifications
TECHNICAL DATA
Interfaces
Ethernet LAN
10 Base-T
RF
RF Frequency
Input connector
US (SMN-9xx):
Europe (SMN-8xx):
US (SMN-9xx):
Europe (SMN-8xx):
Input impedance
50ohm
Power source
Current consumption
5-6VDC
250mA (typical)
919.8MHz or 925MHz
868.4MHz
RP-SMA
SMA
Power
Environment
Operating temperature range
10 – 50oC
Physical
Dimension
Weight
Compliance
Certification
RF Compliance
EMC Compliance
140 x 140 x 35mm
300g
CE, FCC
ETSI EN 300 220
ETSI EN 301 489

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 5
Producer                        : GPL Ghostscript 8.15
Create Date                     : 2007:11:28 10:54:49
Modify Date                     : 2007:11:28 10:54:49
Title                           : Microsoft Word - SMN-800 900 SmartNODE User Guide ver 2.doc
Creator                         : PScript5.dll Version 5.2
Author                          : nghoncheong

EXIF Metadata provided by EXIF.tools