CalAmp Wireless Networks VIM Vehicle Recovery Transceiver, V7A User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1968158
Application ID	sGMMVH33m3YURrn81rqHBg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	26.5kB (331244 bits)
Date Submitted	2013-05-19 00:00:00
Date Available	2013-05-19 00:00:00
Creation Date	2013-05-14 16:47:01
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2013-05-14 16:47:01
Document Title	Microsoft Word - 5531-0001-IG V7A&VIM Installation Guide ver 2_5-10-13_.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	mkli

5531-0001-IG V7A&VIM Installation Guide
Prepared By:
Date:
Document ID:
Revision:
Document Name:
Vincent Ricci
May 10, 2013
5531-0001-IG
"1.0"
5531-0001-IG V7A&VIM Installation Guide(4-19-13).doc
Revision: "1.0"
5531-0001-IG V7A&VIM Installation Guide
Copyright
Copyright © 2013 by LoJack Corporation. All rights reserved. This document contains
proprietary information protected by copyright. This document is intended for use by
LoJack internal customers and should be disclosed within the customer’s organization
on a “need to know” basis. This document shall not be reproduced by any means,
stored on magnetic media, or made available directly or indirectly to any third party,
without prior written consent of LoJack Corporation. Program listings may be entered,
stored, and executed in a computer system, but may not be reproduced for publication.
The information in this document is subject to change without notice and should not be
construed as a commitment by LoJack, which expressly disclaims any warranties,
express or implied, including any implied warranty of merchantability or fitness for a
particular purpose and assumes no liability for errors or omissions in this guide or any
damages, direct or consequential resulting from its use.
All brand and/or product names are trademarks or registered trademarks of their
respective holders.
For inquiries or comments, e-mail LoJack Corporation at the following address:
engdocs@lojack.com
Document ID #: 5531-0001-IG
Page 2 of 8
LOJACK CONFIDENTIAL PROPRIETARY
DOCUMENT NOT TO BE COPIED OR RETRANSMITTED IN ANY FORM WITHOUT PRIOR AUTHORIZATION
Revision: "1.0"
5531-0001-IG V7A&VIM Installation Guide
Compliance
FCC:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Caution: Changes or modifications not expressly approved by LoJack Corporation could void the
user's authority to operate the equipment.95
Industry Canada:
This device complies with Industry Canada License‐Exempt RSS Standard(s). Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference,
(2) this device must accept any interference received, including interference that may cause undesired operation.
Cet appareil est conforme avec Industrie Canada exempts de licence RSS Norme (s). Son fonctionnement
est soumis aux deux conditions suivantes,
(1) Ce dispositif ne doit pas causer d'interférences nuisibles,
(2) cet appareil doit accepter toute interférence reçue, y compris les interférences pouvant entraîner un
fonctionnement indésirable.
Document ID #: 5531-0001-IG
Page 3 of 8
LOJACK CONFIDENTIAL PROPRIETARY
DOCUMENT NOT TO BE COPIED OR RETRANSMITTED IN ANY FORM WITHOUT PRIOR AUTHORIZATION
Revision: "1.0"
5531-0001-IG V7A&VIM Installation Guide
Document History
Version
Status
Date
Author
1.0
Draft
04-19-2013
VR
Put on LoJack Template add Compliance
statements.
0.1
Draft
SR
Original Development
Document ID #: 5531-0001-IG
Description
Page 4 of 8
LOJACK CONFIDENTIAL PROPRIETARY
DOCUMENT NOT TO BE COPIED OR RETRANSMITTED IN ANY FORM WITHOUT PRIOR AUTHORIZATION
Approval
Revision: "1.0"
5531-0001-IG V7A&VIM Installation Guide
Table of Contents
Copyright........................................................................................................................................................... 2
Compliance Requirements.............................................................................................................................. 3
Document History ............................................................................................................................................ 4
Table of Contents ............................................................................................................................................. 5
Table of Figures................................................................................................................................................ 5
Section 1 Guidelines for the Installation of VIM Module and V7A .............................................................. 6
Table of Figures
Error! No table of figures entries found.
Document ID #: 5531-0001-IG
Page 5 of 8
LOJACK CONFIDENTIAL PROPRIETARY
DOCUMENT NOT TO BE COPIED OR RETRANSMITTED IN ANY FORM WITHOUT PRIOR AUTHORIZATION
Revision: "1.0"
5531-0001-IG V7A&VIM Installation Guide
Section 1 Guidelines for the Installation of VIM Module and V7A
This document will serve as a guideline for the installation of a V7A and a VIM module. The proper methods for the
connection of the output from the VIM module must be determined by the installer at the time of installation. This
document will be divided into two sections. The first will focus on the installation of the V7A and the second will
focus on the installation of the VIM module. The V7A and the VIM will be paired at the time of manufacture and
should be kept together until they are installed in a vehicle.
The V7A and the VIM module communicate via a wireless connection using an encrypted serial protocol. While the
link is designed to be very robust, there are some attributes that must be considered when installing these devices
into a vehicle. It is assumed that both the V7A and the VIM module will be installed inside the passenger
compartment of the vehicle.
V7A
The V7A should be installed using the same guidelines as a typical VLU7 EW.
• The Unit should be installed within the passenger compartment of the vehicle
• The Unit should be concealed as well as possible
• The Unit must be securely fastened
• The two ground lugs must be securely fastened to chassis ground in the vehicle
• If the unit is vehicle powered, it must be connected to a clean, constant, non‐computer controlled 12 volt source
• The antenna must be installed per the approved antenna installation guidelines
• The unit should not be installed in a location that results in the device being completely encased in metal. The
antenna for the transmitter that communicates to the VIM is located inside the module.
VIM Module
The VIM module will typically be installed in a location that allows easy access to the immobilizer device. The
following steps will allow for reliable communication with the V7A.
•
•
•
•
•
•
The unit should be installed within the passenger compartment of the vehicle
The unit should be concealed in a way that it is not readily visible to the user or a thief
The unit should be securely fastened
The top side of the unit should not be placed in direct contact with a metallic surface
The unit should not be installed in a location that results in the device being completely encased in metal. The
antenna for the transmitter that communicates to the V7A is located inside the module.
The VIM module has the following input terminals
o NC ‐ Normally Closed contact
o COM ‐ Common
o IGN ‐ Ignition
o ‐
‐ Chassis Ground
o +
‐ constant 12 volt
Typical Starter Interrupt Wiring
Document ID #: 5531-0001-IG
Page 6 of 8
LOJACK CONFIDENTIAL PROPRIETARY
DOCUMENT NOT TO BE COPIED OR RETRANSMITTED IN ANY FORM WITHOUT PRIOR AUTHORIZATION
Revision: "1.0"
5531-0001-IG V7A&VIM Installation Guide
Starter
Starter
Ignition
Chassis
Constant 12
Document ID #: 5531-0001-IG
Page 7 of 8
LOJACK CONFIDENTIAL PROPRIETARY
DOCUMENT NOT TO BE COPIED OR RETRANSMITTED IN ANY FORM WITHOUT PRIOR AUTHORIZATION
Revision: "1.0"
5531-0001-IG V7A&VIM Installation Guide
5531-0001-IG V7A&VIM Installation Guide
Revision: "1.0"
5531-0001-IG
Document ID #: 5531-0001-IG
Page 8 of 8
LOJACK CONFIDENTIAL PROPRIETARY
DOCUMENT NOT TO BE COPIED OR RETRANSMITTED IN ANY FORM WITHOUT PRIOR AUTHORIZATION

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2013:05:14 16:47:01+08:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2013:05:14 16:47:01+08:00
Format                          : application/pdf
Creator                         : mkli
Title                           : Microsoft Word - 5531-0001-IG V7A&VIM Installation Guide ver 2_5-10-13_.doc
Document ID                     : uuid:f8c90474-fd1e-495b-842f-646274d629aa
Instance ID                     : uuid:c6850393-40f1-4093-8877-ed643549cf3e
Page Count                      : 8
Author                          : mkli

EXIF Metadata provided by EXIF.tools