CalAmp 4859300114 LTE PCI-e Moudular User Manual ADA 890 Specification

CalAmp Corp. LTE PCI-e Moudular ADA 890 Specification

User Manual rever5.pdf

LTE Mini PCI-e Module User Manual Rev:R1.2 1 LTE Mini PCI-e Module—LP 15 User Manual V2.0
LTE Mini PCI-e Module User Manual Rev:R1.2 2 Revision History Revision Changes Date V1.0 Initial Draft 2012-08-19 V2.0 Revise 2012-12-06
LTE Mini PCI-e Module User Manual Rev:R1.2 3 Index REVISION HISTORY ......................................................................................................................................... 2 1 INTRODUCTION ....................................................................................................................................... 4 2 MECHANICAL INFORMATION ............................................................................................................. 4 3 SPECIFICATIONS ..................................................................................................................................... 5 3.1 RF PERFORMANCE ................................................................................................................................. 6 3.1.1 RX Performance ................................................................................................................................ 6 3.1.2 TX Performance ................................................................................................................................ 6 3.1.3 UIM Card ......................................................................................................................................... 7 3.1.4 USB PORT ........................................................................................................................................ 7 3.1.5 RF Subsystem .................................................................................................................................... 7 3.2 FULL-MINI PCI EXPRESS CARD PCB DETAILS ...................................................................................... 7 4 REGULATORY AND SAFETY INFORMATION .................................................................................. 8 4.1 REGULATORY APPROVALS..................................................................................................................... 8 4.1.1 Transmitter ....................................................................................................................................... 8 4.1.2 Receiver ............................................................................................................................................ 8 4.1.3 FCC Compliance .............................................................................................................................. 8 4.1.4 Labeling ............................................................................................................................................ 9 4.2 RF ENERGY EXPOSURE INFORMATION .................................................................................................. 9 5 INSTALLATION GUIDELINES ............................................................................................................. 10 5.1 INTRODUCTION .................................................................................................................................... 10 5.2 APPLICATION TYPE .............................................................................................................................. 10
LTE Mini PCI-e Module User Manual Rev:R1.2 4 1 Introduction LP15 is Mini-PCIE interface wireless LTE module base on LTE technology, which has high performance and durability and could be used in CPE, POS machine, electronic metering, security camera and medical care area. It has standard Mini PCI-e interface which is easy to be integrated. Mode Description LP15 Support Band14 2 Mechanical Information Items Specification Size 51(L)x30(W)x4.5(H) mm Mini PCI-e Full Mini PCI-e
LTE Mini PCI-e Module User Manual Rev:R1.2 5 3 Specifications LTE Features Support Band Band14 LTE Standard 3GPP Release 8 UE Category Category 3 Bandwidth 5MHz,10MHz Interfaces Mini PCI-e 52PIN Mini PCI-e USB interface USB 2.0 high speed UART Support USIM interface 1.8V or 3.0V USIM Antenna port Dual-Antenna connector RF Connectors 20279-001E-01(I-PEX) Operating voltage 3.3 V Power supply Electrical Power 3.3 Vdc Power Consumption 3.5 Watts maximum RF performance Maximum Output Power 22±1dBm TX Performance See details TX performance RX Performance See details RX performance Mechanical Module Interface 52 pin Full-Mini PCI Express Card interface Dimensions 30x 51x4.6mm Environmental Operation Temperature -20℃ ~ 55℃ Storage Temperature -40℃ ~ 85℃ Operation Humidity 5% ~ 95%
LTE Mini PCI-e Module User Manual Rev:R1.2 6 3.1 RF Performance 3.1.1 RX Performance Item Description Frequency range 758MHz-768MHz Reference sensitivity level (TDD) <-99.3dBm@BW=5MHz <-96.3dBm@BW=10MHz <-94.5dBm@BW=15MHz <-93.3dBm@BW=20MHz Maximum input level >-25.7dBm Spurious emissions <-57 dBm@100KHz 30MHz ≤ f < 1GHz <-47 dBm@1MHz 1GHz ≤ f ≤ 12.75 GHz 3.1.2 TX Performance Item Description Frequency range 788MHz-798MHz UE Maximum Output Power 22±1dBm Maximum Power Reduction (MPR) 22+1/-2.7dBm QPSK(Full RB) 22+12/-2.7dBm 16QAM(Low RB) 22+1/-3.7dBm 16QAM(Full RB) Minimum Output Power <-39dBm Transmit OFF power <-48.5 dBm Frequency Error |Δf| ≤ (0.1 PPM + 15 Hz) Error Vector Magnitude (EVM) PUSCH 17.5@QPSK BPSK ;12.5%@16QAM PUCCH 17.5% PRACH 17.5%@FFS Carrier leakage <-24.2dBc@3.2 dBm ±3.2dB <-19.2dBc@-26.8 dBm ±3.2dB <-9.2dBc@-36.8 dBm ±3.2dB Adjacent Channel Leakage power Ratio <-32.2dBc@ACPR1_UTRA <-35.2dBc@ACPR2_UTRA <-29.2dBc@ACPR_EUTRA Transmitter Spurious emissions <-36 dBm@BW=1KHz 9 kHz ≤ f < 150 kHz <-36 dBm@BW=10KHz 150 kHz ≤ f < 30 MHz <-36 dBm@BW=100KHz 30 MHz ≤ f < 1000 MHz <-30dBm@BW=1MHz 1 GHz ≤ f < 12.75 GHz
LTE Mini PCI-e Module User Manual Rev:R1.2 7 3.1.3 UIM Card LP15 supports UIM card. The UIM interface includes all the necessary signals, which are routed to the interface connector . 3.1.4 USB PORT LP15 has USB client port, it can be used as debug, download, AT command and modem interface port. 3.1.5 RF Subsystem LP15 includes all of the active BB and RF circuit, no need to add other RF components, suggest to have a Pi type antenna matching circuits if you want to have external antenna Note: The RF connector information: Manufactory: I-PEX MPN: 20279-001E-01 3.2 Full-Mini PCI Express Card PCB Details
LTE Mini PCI-e Module User Manual Rev:R1.2 8 4 Regulatory and Safety Information 4.1 Regulatory Approvals 4.1.1 Transmitter LP15 have been tested and meet FCC (Part2/Part 90) regulatory requirements. 4.1.2 Receiver The receiver associated with this transmitting device has been tested and declared to meet the regulatory requirements. 4.1.3 FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. The user should take caution that changes or modifications not expressly approved by manufacturer could void the user’s authority to operate this equipment. All required software and operating conditions must not be violated by the installer/user and is an express condition of use for this equipment. Modular Approval for use as a module in mobile-only exposure conditions. Only those antenna(s) specified in the filing may be used with this transmitter. This device is only authorized for OEM integration into host products; consumer or end-user installation is not allowed. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.
LTE Mini PCI-e Module User Manual Rev:R1.2 9 4.1.4 Labeling The FCC labeling of the module is shown below. When integrating the module into a host, the label must be visible through a window, visible through an access panel that is easily removed, or a second label must be placed on the outside of the host device that contains the following text: Contains FCC ID: J26-4859300114. 4.2 RF Exposure Compliance The LP15 module radio is intended for use in the Industrial Monitoring and Control and SCADA markets. The LP15 module unit must be professionally installed and must ensure a minimum separation distance between the radiating structure and any person. It is the responsibility of the user to guarantee compliance with the FCC MPE regulations when operating this device. LP15 module uses a low power radio frequency transmitter. The concentrated energy from an antenna may pose a health hazard. People should not be in front of the antenna when the transmitter is operating. The installer of this equipment must ensure the antenna is located or pointed such that it does not emit an RF field in excess of Health Canada limits for the general population. Recommended safety guidelines for the human exposure to radio frequency electromagnetic energy are contained in the Canadian Safety Code 6 (available from Health Canada) and the Federal Communications Commission (FCC) Bulletin 65. Any changes or modifications not expressly approved by the party responsible for compliance (in the country where used) could void the user's authority to operate the equipment. The resulted power density at a distance of 20 cm can be deducted as follows: EIRP = 23 + 2 = 25 dBm = 316 mW Power Density = EIRP*Duty Cycle/(4πR2)
LTE Mini PCI-e Module User Manual Rev:R1.2 10 = 305*1/(4*π*202) = 0.06 mW/cm2 Where DutyCycle is 1 and R is 20 cm, antenna gain is 2dBi The MPE limit for General Population/Uncontrolled Exposure is shown in the FCC OET Bulletin 65 Supplement C and can be calculated as follows: MPE limit = 790.5/1500 = 0.527 mW/cm2 5 Installation Guidelines 5.1 Introduction Careful planning and preparation of any installation will always benefit the end result; always read and follow all installation instructions. Follow ESD precautions and prepare an ESD safe workspace for installation. Turn the power to the host off and ground yourself to dissipate static charge. Mount only in sockets and locations intended for Type F1 Full-Mini cards and consult manufacturer on thermal management recommendations for the module mounted within the host. 5.2 Application Type The application type of the module is shown as bellow: All instructions relating to the integration of the module described on the FCC Grant notes must be followed.

Navigation menu