CalAmp 4859300114 LTE PCI-e Moudular User Manual ADA 890 Specification
CalAmp Corp. LTE PCI-e Moudular ADA 890 Specification
CalAmp >
User Manual rever5.pdf
LTE Mini PCI-e Module User Manual
Rev:R1.2
1
LTE Mini PCI-e Module—LP 15
User Manual
V2.0
LTE Mini PCI-e Module User Manual
Rev:R1.2
2
Revision History
Revision
Changes
Date
V1.0
Initial Draft
2012-08-19
V2.0
Revise
2012-12-06
LTE Mini PCI-e Module User Manual
Rev:R1.2
3
Index
REVISION HISTORY ......................................................................................................................................... 2
1 INTRODUCTION ....................................................................................................................................... 4
2 MECHANICAL INFORMATION ............................................................................................................. 4
3 SPECIFICATIONS ..................................................................................................................................... 5
3.1 RF PERFORMANCE ................................................................................................................................. 6
3.1.1 RX Performance ................................................................................................................................ 6
3.1.2 TX Performance ................................................................................................................................ 6
3.1.3 UIM Card ......................................................................................................................................... 7
3.1.4 USB PORT ........................................................................................................................................ 7
3.1.5 RF Subsystem .................................................................................................................................... 7
3.2 FULL-MINI PCI EXPRESS CARD PCB DETAILS ...................................................................................... 7
4 REGULATORY AND SAFETY INFORMATION .................................................................................. 8
4.1 REGULATORY APPROVALS..................................................................................................................... 8
4.1.1 Transmitter ....................................................................................................................................... 8
4.1.2 Receiver ............................................................................................................................................ 8
4.1.3 FCC Compliance .............................................................................................................................. 8
4.1.4 Labeling ............................................................................................................................................ 9
4.2 RF ENERGY EXPOSURE INFORMATION .................................................................................................. 9
5 INSTALLATION GUIDELINES ............................................................................................................. 10
5.1 INTRODUCTION .................................................................................................................................... 10
5.2 APPLICATION TYPE .............................................................................................................................. 10
LTE Mini PCI-e Module User Manual
Rev:R1.2
4
1 Introduction
LP15 is Mini-PCIE interface wireless LTE module base on LTE technology, which has high
performance and durability and could be used in CPE, POS machine, electronic metering,
security camera and medical care area. It has standard Mini PCI-e interface which is easy to
be integrated.
Mode
Description
LP15
Support Band14
2 Mechanical Information
Items
Specification
Size
51(L)x30(W)x4.5(H) mm
Mini PCI-e
Full Mini PCI-e
LTE Mini PCI-e Module User Manual
Rev:R1.2
5
3 Specifications
LTE Features
Support Band
Band14
LTE Standard
3GPP Release 8
UE Category
Category 3
Bandwidth
5MHz,10MHz
Interfaces
Mini PCI-e
52PIN Mini PCI-e
USB interface
USB 2.0 high speed
UART
Support
USIM interface
1.8V or 3.0V USIM
Antenna port
Dual-Antenna connector
RF Connectors
20279-001E-01(I-PEX)
Operating voltage
3.3 V
Power supply
Electrical Power
3.3 Vdc
Power Consumption
3.5 Watts maximum
RF performance
Maximum Output Power
22±1dBm
TX Performance
See details TX performance
RX Performance
See details RX performance
Mechanical
Module Interface
52 pin Full-Mini PCI Express Card interface
Dimensions
30x 51x4.6mm
Environmental
Operation Temperature
-20℃ ~ 55℃
Storage Temperature
-40℃ ~ 85℃
Operation Humidity
5% ~ 95%
LTE Mini PCI-e Module User Manual
Rev:R1.2
6
3.1 RF Performance
3.1.1 RX Performance
Item
Description
Frequency range
758MHz-768MHz
Reference sensitivity level
(TDD)
<-99.3dBm@BW=5MHz
<-96.3dBm@BW=10MHz
<-94.5dBm@BW=15MHz
<-93.3dBm@BW=20MHz
Maximum input level
>-25.7dBm
Spurious emissions
<-57 dBm@100KHz
30MHz ≤ f < 1GHz
<-47 dBm@1MHz
1GHz ≤ f ≤ 12.75 GHz
3.1.2 TX Performance
Item
Description
Frequency range
788MHz-798MHz
UE Maximum Output Power
22±1dBm
Maximum Power Reduction
(MPR)
22+1/-2.7dBm
QPSK(Full RB)
22+12/-2.7dBm
16QAM(Low RB)
22+1/-3.7dBm
16QAM(Full RB)
Minimum Output Power
<-39dBm
Transmit OFF power
<-48.5 dBm
Frequency Error
|Δf| ≤ (0.1 PPM + 15 Hz)
Error Vector Magnitude
(EVM)
PUSCH 17.5@QPSK BPSK ;12.5%@16QAM
PUCCH 17.5%
PRACH 17.5%@FFS
Carrier leakage
<-24.2dBc@3.2 dBm ±3.2dB
<-19.2dBc@-26.8 dBm ±3.2dB
<-9.2dBc@-36.8 dBm ±3.2dB
Adjacent Channel
Leakage power Ratio
<-32.2dBc@ACPR1_UTRA
<-35.2dBc@ACPR2_UTRA
<-29.2dBc@ACPR_EUTRA
Transmitter Spurious
emissions
<-36 dBm@BW=1KHz
9 kHz ≤ f < 150 kHz
<-36 dBm@BW=10KHz
150 kHz ≤ f < 30 MHz
<-36 dBm@BW=100KHz
30 MHz ≤ f < 1000 MHz
<-30dBm@BW=1MHz
1 GHz ≤ f < 12.75 GHz
LTE Mini PCI-e Module User Manual
Rev:R1.2
7
3.1.3 UIM Card
LP15 supports UIM card. The UIM interface includes all the necessary signals, which are
routed to the interface connector
.
3.1.4 USB PORT
LP15 has USB client port, it can be used as debug, download, AT command and modem
interface port.
3.1.5 RF Subsystem
LP15 includes all of the active BB and RF circuit, no need to add other RF components,
suggest to have a Pi type antenna matching circuits if you want to have external antenna
Note: The RF connector information:
Manufactory: I-PEX
MPN: 20279-001E-01
3.2 Full-Mini PCI Express Card PCB Details
LTE Mini PCI-e Module User Manual
Rev:R1.2
8
4 Regulatory and Safety Information
4.1 Regulatory Approvals
4.1.1 Transmitter
LP15 have been tested and meet FCC (Part2/Part 90) regulatory requirements.
4.1.2 Receiver
The receiver associated with this transmitting device has been tested and declared to meet the
regulatory requirements.
4.1.3 FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the condition
that this device does not cause harmful interference.
The user should take caution that changes or modifications not expressly approved by
manufacturer could void the user’s authority to operate this equipment. All required software
and operating conditions must not be violated by the installer/user and is an express condition
of use for this equipment.
Modular Approval for use as a module in mobile-only exposure conditions. Only those
antenna(s) specified in the filing may be used with this transmitter. This device is only
authorized for OEM integration into host products; consumer or end-user installation is not
allowed. The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons.
LTE Mini PCI-e Module User Manual
Rev:R1.2
9
4.1.4 Labeling
The FCC labeling of the module is shown below. When integrating the module into a host,
the label must be visible through a window, visible through an access panel that is easily
removed, or a second label must be placed on the outside of the host device that contains the
following text: Contains FCC ID: J26-4859300114.
4.2 RF Exposure Compliance
The LP15 module radio is intended for use in the Industrial Monitoring
and Control and SCADA markets. The LP15 module unit must be
professionally installed and must ensure a minimum separation distance
between the radiating structure and any person. It is the responsibility of
the user to guarantee compliance with the FCC MPE regulations when
operating this device.
LP15 module uses a low power radio frequency transmitter. The
concentrated energy from an antenna may pose a health hazard. People
should not be in front of the antenna when the transmitter is operating.
The installer of this equipment must ensure the antenna is located or pointed such that it does
not emit an RF field in excess of Health Canada limits for the general population.
Recommended safety guidelines for the human exposure to radio frequency electromagnetic
energy are contained in the Canadian Safety Code 6 (available from Health Canada) and the
Federal Communications Commission (FCC) Bulletin 65.
Any changes or modifications not expressly approved by the party responsible for
compliance (in the country where used) could void the user's authority to operate the
equipment.
The resulted power density at a distance of 20 cm can be deducted as follows:
EIRP = 23 + 2 = 25 dBm = 316 mW
Power Density = EIRP*Duty Cycle/(4πR2)
LTE Mini PCI-e Module User Manual
Rev:R1.2
10
= 305*1/(4*π*202) = 0.06 mW/cm2
Where DutyCycle is 1 and R is 20 cm, antenna gain is 2dBi
The MPE limit for General Population/Uncontrolled Exposure is shown in the FCC OET
Bulletin 65 Supplement C and can be calculated as follows:
MPE limit = 790.5/1500 = 0.527 mW/cm2
5 Installation Guidelines
5.1 Introduction
Careful planning and preparation of any installation will always benefit the end result; always
read and follow all installation instructions. Follow ESD precautions and prepare an ESD safe
workspace for installation. Turn the power to the host off and ground yourself to dissipate
static charge.
Mount only in sockets and locations intended for Type F1 Full-Mini cards and consult
manufacturer on thermal management recommendations for the module mounted within the
host.
5.2 Application Type
The application type of the module is shown as bellow:
All instructions relating to the integration of the module described on the FCC Grant notes
must be followed.