Cambridge Silicon Radio BSMAN BlueSlim Modules BSMAN1, BSMAN3 and BSMAN4 User Manual Antenna 1

Cambridge Silicon Radio Ltd BlueSlim Modules BSMAN1, BSMAN3 and BSMAN4 Antenna 1

Antenna 1

Integrated Antenna Solutions 1Product Specication 06MD-0002-1-PSFusca 2.4GHz SMD Antenna Product SpecicationPart No. A10192-L1 FeaturesDesigned for 2.4GHz applications [Bluetooth®, WiFi® (802.11b/g), ZigBee®, etc.]Intended for SMD mountingSupplied in tape on reel2 DescriptionThe Fusca antenna is intended for use with all 2.4GHz applications. The antenna requires a groundplane, i.e. your device acts as an active part of the antenna and thus demands careful consideration concerning its placement.3 ApplicationsMobile phonesPDAsHeadsetsPC-CardsCF-Cards••••••••
Integrated Antenna Solutions 2Product Specication 06MD-0002-1-PSFusca 2.4GHz SMD AntennaPart No. A10192-LContents1 Features 12 Description 13 Applications 14 Model Name 35 General Data 36 Electrical Characteristics 37 Electrical Performance 48 Antenna Dimensions 59 Antenna Footprint 510 Electrical Interface 610-1 Transmission Line and Matching 611 Test Board Dimensions 612 Soldering 713 Reliability 713-1 Temperature and Humidity 713-2 Mechanical 714 Hazardous Material Regulation Conformance 815 Packaging 915-1 Shelf Storage Recommendations 915-2 Tape Characteristics 915-3 Reel Dimensions 9
Integrated Antenna Solutions 3Product Specication 06MD-0002-1-PSFusca 2.4GHz SMD AntennaPart No. A10192-L4 Model NameA101925 General DataProduct Name Fusca 2.4GHzPart No. A10192-LFrequency 2.4 – 2.5GHzPolarization LinearOperating Temperature -40 to +85 °C6 Electrical CharacteristicsCharacteristics *ConditionsMin Typ MaxPeak Gain TBD 0.4dBi TBD Frequency 2.4-2.5GHz, Measured in 3D chamber (near eld)Efciency TBD 50% TBDVSWR TBD 2:1 TBD Frequency 2.4-2.5GHz, Measured with Network Analyser* Note all data provided in this table are based on the Antenova reference board.
Integrated Antenna Solutions 4Product Specication 06MD-0002-1-PSFusca 2.4GHz SMD AntennaPart No. A10192-L7 Electrical Performance
Integrated Antenna Solutions 5Product Specication 06MD-0002-1-PSFusca 2.4GHz SMD AntennaPart No. A10192-L8 Antenna DimensionsL W H F S K J I OLength Width Height4.0 ±0.2 3.0 ±0.2 1.1 ±0.2 1.0 ±0.15 0.8 ±0.15 0.2 ±0.15 0.2 ±0.15 0.6 ±0.15 0.2 ±0.15All dimensions in mm9 Antenna FootprintS I K T M N OPad 50Ω transmission line. Dependent on substrate0.8 ±0.1 1 ±0.1 2 ±0.1 0.6 ±0.1 0.4 ±0.2All dimensions in mm
Integrated Antenna Solutions 6Product Specication 06MD-0002-1-PSFusca 2.4GHz SMD AntennaPart No. A10192-L10 Electrical Interface10-1 Transmission Line and MatchingTypical config. 1Typical config. 2InductorCapacitorComponent typesModule ComponentComponentComponentStrip LineDC BlockThe matching network has to be individually designed using one, two or three components.t, W Unique dimensioning according to your PCB*C Inductor and capacitor values according to your device**Antenova provides a design service to determine these parameters on request.11 Test Board DimensionsThe test board is designed for evaluation purposes for Fusca 2.4GHz SMD antenna. The card is a similar size to a typical Bluetooth headset.
Integrated Antenna Solutions 7Product Specication 06MD-0002-1-PSFusca 2.4GHz SMD AntennaPart No. A10192-L12 SolderingThe antenna has been designed for lead free soldering. A recommended solder paste and reow prole will be provided.13 Reliability13-1 Temperature and HumidityThe antenna will be tested for conformance to the following standards:Item Standard Low High DurationOperating Temperature EN/IEC 60068-2-2, Test Bd: Dry heat -30 °C +90 °C -Temperature Cycling EN/IEC 60068-2-14, Test Na: Change of temperature -40 °C +90 °C 500 cycles / 10 minStorage Life Humidity EN/IEC 60068-2-1, Test Ca: Damp heat +60 °C / 90% RH -Storage Life Low TemperatureEN/IEC 60068-2-1, Test Ad: Cold -55 °C - -Storage Life High TemperatureEN/IEC 60068-2-2, Test Bb: Dry heat - +125 °C -13-2 MechanicalThe antenna will be tested for conformance to the following standards:Item Standard Low High DurationBending IEC 60068-2-21, Test Ue1: BendingBending 1mm at a rate of 1mm/s with support at end of PCB1mm depth on reference boardShear IEC 60068-2-21, Test Ue3: ShearForce of 5N applied to the side of the antennaDrop Test Dummy weight: 150gHeight: 170cmOne drop at each side, total drops: 6Vibration EN/IEC 60068-2-6, Test Fc (sinusoidal)Acceleration spectral density: 10-1000HzAcceleration:20m/s2Number of axes: 3 mutually perpendicular5 cycles per axis
Integrated Antenna Solutions 8Product Specication 06MD-0002-1-PSFusca 2.4GHz SMD AntennaPart No. A10192-L14 Hazardous Material Regulation ConformanceRestriction of Hazardous Substances (RoHS)The Fusca SMD Antenna A10192-L will be certied to be in full compliance with the relevant EU directives with respect to the content of:Cadmium and cadmium compounds Lead and lead compoundsOrganic brominated compound (PBB, PBDE) Mercury and mercury compoundsPolychlorinated biphenyl (PCB) Hexavalent chromium compoundsPolychlorinated naphthalene (PCN)Chlorinated parafn (CP)Organic tin compoundsMirexAsbestos FormaldehydeAzo compounds Tetra-bromo-bisphenol-A-bis (TBBP-A-bis)Antenova’s Declaration of Compliance for the Fusca SMD Antenna A10192-L will be available upon request from Antenova Technical Support.
Integrated Antenna Solutions 9Product Specication 06MD-0002-1-PSFusca 2.4GHz SMD AntennaPart No. A10192-L15 Packaging15-1 Shelf Storage RecommendationsTemperature -10 to +40 °CHumidity Less than 75% RHShelf Life 18 MonthsStorage Place Away from corrosive gas and direct sunlight15-2 Tape CharacteristicsW F E1 P0 P1 P2 A0 B0 K0 T D0 D112.00 ±0.25.50 ±0.11.75 ±0.14.00 ±0.18.00 ±0.12.00 ±0.13.20 ±0.14.20 ±0.11.30 ±0.10.30 ±0.11.50 ±0.11.50 ±0.1Quantity Leading Space Trailing SpaceTBC 60 blank antenna holders 37 blank antenna holders15-3 Reel DimensionsMaterial Conductive PolystyreneWidth (W) 14mmReel Dia (D) 178mm ±2.0mmHub Dia (H) 60mmShaft Dia (C) 13.2mm ±0.5mm
Integrated Antenna Solutions 10Product Specication 06MD-0002-1-PSwww.antenova.comCorporate HeadquartersAntenova Ltd.Far Field HouseAlbert RoadStow-cum-QuyCambridge, CB25 9ARUKTel: +44 (0) 1223 810600Fax: +44 (0) 1223 810650Email: sales@antenova.comUSA HeadquartersAntenova USARogers Business Park2541 Technology Drive, Suite 403Elgin, IL 60124USATel: +1 (847) 551-9710Fax: +1 (847) 551-9719Email: sales@antenova.comAsia HeadquartersAntenova Asia Ltd.4F, No. 324, Sec. 1, Nei-Hu RoadNei-Hu DistrictTaipei 11493Taiwan, ROCTel: +886 (0) 2 8797 8630Fax: +886 (0) 2 8797 6890Email: sales@antenova.comCopyright® 2007 Antenova Ltd. All Rights Reserved. Antenova® and RADIONOVA® are trademarks of Antenova Ltd. Any other names and/or trademarks belong to their respective companies. The materials provided herein are believed to be reliable and correct at the time of print. Antenova does not warrant the accuracy or completeness of the information, text, graphics or other items contained within these information. Antenova further assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s risk.

Navigation menu