Cambridge Silicon Radio CNS12015 Bluetooth Low Energy Retail Tag User Manual Retail Tag Instructions

Cambridge Silicon Radio Ltd Bluetooth Low Energy Retail Tag Retail Tag Instructions

Contents

User Manual

Retail Tag instructions Page 1 of 3 © Cambridge Silicon Radio Limited 2013 CS-00000-RPPA This material is subject to CSR’s non-disclosure agreement www.csr.com CSR Retail Tag Instructions Manual Introduction The CSR Retail tag is a standalone device, designed to be maintenance free, there are no user serviceable parts in the device. The CSR retail tag uses the ISDN band of 2.4GHz to 2.5HZ to operate, uses extremely low power , the power output will be no more than 0dBm, which enables the battery life to be extended. The typical battery life for the device is 2.5 years (this depends on the quality of the AA batteries used). The retail tag is design to be positioned on or near to a product on a shelf in a store. The Retail tags sole function is to transmit a pre-set unique number, which will allow a simple application loaded onto a smart phone to link to a website which would provide advertising and / or technical details about the product the retail tag has been positioned close too. The retails tag can be positioned on the shelf or under it, it can be positioned near to the product or tied to the product using a simple cable tie. The Retail tag is shipped with its batteries removed; instructions on how to install the batteries are given below. Once the batteries are installed the unit is operating there is no further action needed by the user. The user will now only need to link the unique number used by the application on the smart phone to the relevant website or webpage which provides the information the user which to provide. Instructions for inserting the batteries The Device is shipped with the batteries removed for safety as shown in the picture below Insert two ‘AA’ standard batteries as shown in the picture below
Retail Tag instructions Page 2 of 3 © Cambridge Silicon Radio Limited 2013 CS-00000-RPPA This material is subject to CSR’s non-disclosure agreement www.csr.com CSR Retail Tag Instructions Manual Place the whole unit in the black box provided as shown below Then secure the lid using the four self tapping screws provided The final installation phase is the place the unit either on top of the shelf or under the shelf near to the product you wish to advertises. Additional information FCC Rules Part 15 The enclosed hardware device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Compliance Statement: This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television equipment reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna -Increase the separation between the equipment and receiver -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help To assure continued compliance, any changes or responsible for compliance could void the users authority to operate this equipment. (Example- use only shielded interface cables when connecting to a computer or peripheral devices).
Retail Tag instructions Page 3 of 3 © Cambridge Silicon Radio Limited 2013 CS-00000-RPPA This material is subject to CSR’s non-disclosure agreement www.csr.com CSR Retail Tag Instructions Manual Caution! The manufacturer is not responsible for any radio or TV interference caused by unauthorized could void the users authority to operate the equipment. Contacts General information www.csr.com Information on this product sales@csr.com Customer support for this product www.csrsupport.com More detail on compliance and standards product.compliance@csr.com Help with this document comments@csr.com Trademarks, Patents and Licences Unless otherwise stated, words and logos marked with ™ or ® are trademarks registered or owned by CSR plc and/or its affiliates. Other products, services and names used in this document may have been trademarked by their respective owners. The publication of this information does not imply that any licence is granted under any patent or other rights owned by CSR plc or its affiliates. CSR reserves the right to make technical changes to its products as part of its development programme. While every care has been taken to ensure the accuracy of the contents of this document, CSR cannot accept responsibility for any errors. Life Support Policy and Use in Safety-critical Compliance CSR’s products are not authorised for use in life-support or safety-critical applications. Use in such applications is done at the sole discretion of the customer. CSR will not warrant the use of its devices in such applications. Performance and Conformance Refer to www.csrsupport.com for compliance and conformance to standards information.

Navigation menu