Cameo Communications WLG2008B 54Mbps Wireless LAN Pocket Access Point User Manual WLG 2008

Download:
Mirror Download [FCC.gov]
Document ID	722070
Application ID	cMc6JBUt3MCuhnCYHywSrQ==
Document Description	Manual Part2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	183.62kB (2295292 bits)
Date Submitted	2006-10-30 00:00:00
Date Available	2006-10-30 00:00:00
Creation Date	2006-10-30 10:34:50
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2006-10-30 10:35:10
Document Title	Microsoft Word - WLG-2008.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Cathy

5.5
Security
This page is where configures the security features supported by Access Point
Client.
Administrator id: Allow you change the administrator user id.
Password: Allow to change the new login password.
steps:
Here are the necessary
1. Enter the new password in the “AP Password New:” field.
2. Enter the new password again in the “Confirm” field.
3. Click “Apply”
25
5.6 Tools
Four functions are provided in this page, Backup, Restore Settings, Restore
default settings and Firmware Upgrade.
Backup Settings: Click on “Backup” button, which will open a FileSave Dialog
box, where user gets to save all the current settings and configurations to a file.
Restore Settings: Click on the “Browse” button to open a FileOpen Dialog box,
where user gets to select the file, which saves previous settings and
configurations. Upon selecting the saved file, click “Restore” and complete the
restore process when the access point re-operates after it restarts.
Restore to default settings: Click on “Default” button to restore the access
point back to its manufacture default settings.
Firmware Upgrade: Click on the “Browse” button to open a FileOpen Dialog
box, where gets to select the firmware file, which download from the web for the
latest version. Upon selecting the firmware file, click “Upgrade” and complete
the firmware upgrade process when the Access Point re-operates after it
restarts.
26
6. Getting Start with Wireless Router
6.1 Know the 802.11g Wireless Router
Ports:
● Power Receptor
● Reset Button
● RJ-45 Ethernet Port (WAN)
LEDs:
● Power LED: ON when the unit is powered up
● LAN LED: ON indicates LAN connection; BLINK indicates LAN activity
●
WLAN LED: ON indicates WLAN is working; BLINK indicates wireless
activity.
6.2 Connect to the 802.11g Wireless Router
6.2.1
Access the Setting Menu
User could start to access the configuration menu anytime by opening a web
browser window by typing the IP address of this wireless router. The default IP
is 192.168.1.1.
Note: to configure the settings must through the wireless connection,
instead of RJ45 cable.
27
The below window will popup.
Both of the default is “admin”.
Please enter the user name and password.
Now, the main menu screen is popup.
28
6.2.2
Quick Setup with Wizard
Setup wizard is provided as the part of the web configuration utility. User can
simply follow the step-by-step process to get wireless router configuration ready
to run in 6 easy steps by clicking on the “Wizard” button on the function menu.
The following screen will appear. Please click “Next” to continue.
Step 1: Set new Password
User can change the password and then click “Next” to continue.
Step2: Choose time zone
Select properly time zone from the drop down list.
continue.
29
Please click “Next” to
Step 3: Set LAN connection and DHCP server
Set IP address and mask. The default IP is 192.168.1.1.
If user likes to
enable DHCP, please click “Enabled”. DHCP enabled is able to automatically
assign IP addresses. Please assign the range of IP addresses in the fields of
“Range start” and “Range end”. Please click “Next” to continue.
Step 4: Set Internet connection
Select how the router will set up the Internet connection: Obtained IP
automatically; Fixed IP address; PPPoE to obtain IP automatically; PPPoE with
a fixed IP address; PPTP.
Obtain IP automatically (DHCP client):
If user wants to enabled DHCP server, choose "Obtain IP automatically (DHCP
client)" to have the router assign IP addresses automatically.
30
Fixed IP Address:
If Fixed IP address is assigned, the below screen will pop up. Please set the
WAN address and DNS server.
PPPoE to obtain IP automatically:
31
PPPoE with a fixed IP address:
PPTP:
32
Step 5: Set Wireless LAN connection
Click “enable” to enable wireless LAN. If user enables the wireless LAN, type
the SSID in the text box and select a communications channel. The SSID and
channel must be the same as wireless devices attempting communication to the
router.
Step 6: Setup Completed
The Setup wizard is now completed. The new settings will be effective after the
Wireless router restarted. Please click “Restart” to reboot the router. If user
does not want to make any changes, please click “exit” to quit without any
changes. User also can go back to modify the setting by clicking “Back”.
33
7. Configuration
Wireless
Router
through WEB Browser
7.1 LAN Setting
The screen leads to configure the LAN & DHCP Server, set WAN parameters,
create Administrator and User passwords, and set the local time, time zone,
and dynamic DNS.
7.1.1
LAN & DHCP Server
This page enables to set LAN and DHCP properties, such as the host name, IP
address, subnet mask, and domain name. LAN and DHCP profiles are listed in
the DHCP table at the bottom of the screen.
Host Name: Type the host name in the text box. The host name is required by
some ISPs. The default host name is "AP-Router."
IP Address: This is the IP address of the router. The default IP address is
192.168.1.1.
Subnet Mask: Type the subnet mask for the router in the text box. The default
subnet mask is 255.255.255.0.
DHCP Server: Enables the DHCP server to allow the router to automatically
assign IP addresses to devices connecting to the LAN. DHCP is enabled by
default.
All DHCP client computers are listed in the table at the bottom of the screen,
providing the host name, IP address, and MAC address of the client.
34
Start IP: Type an IP address to serve as the start of the IP range that DHCP will
use to assign IP addresses to all LAN devices connected to the router.
End IP: Type an IP address to serve as the end of the IP range that DHCP will
use to assign IP addresses to all LAN devices connected to the router.
Domain Name: Type the local domain name of the network in the text box. This
item is optional.
7.1.2
WAN
This screen leads to set up the router WAN connection, specify the IP address
for the WAN, add DNS numbers, and enter the MAC address.
Connection Type: Select the connection type, either DHCP client, Fixed IP,
PPPoE or PPTP from the drop-down list.
35
Obtain IP automatically (DHCP client):
If user has enabled DHCP server, choose "Obtain IP automatically (DHCP
client)" to have the router assign IP addresses automatically.
MAC Address: Some ISP allows the specific MAC address of the PC to
access the Internet only, you need to fill in the specific MAC address into the
MAC Address field manually, or using the “Clone MAC Address” button to
clone the MAC address of the PC into the MAC Address field automatically.
Fixed IP Address:
If the Internet Service Providers assign a fixed IP address, choose this option
and enter the assigned IP address, subnet mask, gateway IP and DNS IP
addresses for your Broadband Router.
MAC Address: Some ISP allows the specific MAC address of the PC to
access the Internet only, you need to fill in the specific MAC address into the
MAC Address field manually, or using the “Clone MAC Address” button to
clone the MAC address of the PC into the MAC Address field automatically.
36
PPPoE to obtain IP automatically:
If connected to the Internet using a PPPoE (Dial-up xDSL) Modem, the ISP
will provide a Password and User Name, and then the ISP uses PPPoE.
Choose this option and enter the required information.
PPPoE with a fixed IP address:
If connected to the Internet using a PPPoE (Dial-up xDSL) Modem, the ISP
will provide a Password, User Name and a Fixed IP Address, choose this
option and enter the required information.
37
PPTP:
If connected to the Internet using a (PPTP) xDSL Modem, enter the your IP
Address, Subnet Mask, Gateway, Server IP, PPTP Account and PPTP
Password, Your Subnet Mask required by your ISP in the appropriate fields. If
your ISP has provided you with a Connection ID, enter it in the Connection ID
field, otherwise, leave it zero.
38
7.1.3
Password
This screen leads to set administrative and user passwords. These passwords
are used to gain access to the router interface.
Administrator: Login with the Administrator allow you to change settings of the
WLAN Router, type the password the Administrator will use to log in to the
system. The password must be typed again for confirmation.
User: Login with the User only allow you to browser the settings of the WLAN
Router, type the password the User will use to log in to the system. The
password must be typed again for confirmation.
39
7.1.4
Time
This screen leads to set the time and date for the router's real-time clock, select
properly time zone, and enable or disable daylight saving.
Local Time: Displays the local time and date.
Time Zone: Select properly time zone from the drop-down list.
Default NTP server: Specific a NTP server address or domain name to update
the standard time form NTP server automatically.
Daylight Saving: Enable or disable daylight saving time. When enabled, select
the start and end date for daylight saving time.
40
7.2 Wireless
This section leads to set wireless communications parameters for the router's
wireless LAN feature.
7.2.1
Basic
This page allows enabling and disabling the wireless LAN function, creating a
SSID, and selecting the channel for wireless communications.
SSID: Type an SSID in the text box. The SSID of any wireless device must
match the SSID typed here in order for the wireless device to access the LAN
and WAN via the router.
Channel: Select a transmission channel for wireless communications. The
channel of any wireless device must match the channel selected here in order
for the wireless device to access the LAN and WAN via the router.
41
7.2.2
WEP
The authentication type default is set to disable. There are four options: Disable,
WEP, WPA-PSK, and WPA2-PSK.
WEP Encryption
WEP Type: Open System allows public access to the router via wireless
communications; Shared Key requires the user to set a WEP key to
exchange data with other wireless clients that have the same WEP key.
Mode: Select the key mode in ASCII or HEX
WEP Key: Select the level of encryption from the drop-down list. The router
supports, 64- and 128-bit encryption.
Key 1 ~ Key 4: Enables user to create an encryption scheme for Wireless
LAN transmissions. Manually enter a set of values for each key. Select a
key to use by clicking the radio button next to the key. Click “Clear” to erase
key values.
42
WPA-PSK / WPA2-PSK
Passphrase: Set the PSK key in the Passphrase field. The length should
be 8 characters at least.
7.2.3
Advanced
This screen leads to configure advanced wireless functions.
Beacon Interval: Type the beacon interval in the text box. User can specify a
value from 1 to 1000. The default beacon interval is 100.
RTS Threshold: Type the RTS (Request-To-Send) threshold in the text box.
This value stabilizes data flow. If data flow is irregular, choose values between
256 and 2432 until data flow is normalized.
Fragmentation Threshold: Type the fragmentation threshold in the text box. If
packet transfer error rates are high, choose values between 256 and 2346 until
packet transfer rates are minimized. (NOTE: set this fragmentation threshold
value may diminish system performance.)
DTIM Interval: Type a DTIM (Delivery Traffic Indication Message) interval in the
text box. User can specify a value between 1 and 65535. The default value is 3.
43
TX Rates (MBps): Select one of the wireless communications transfer rates,
measured in megabytes per second, based upon the speed of wireless
adapters connected to the WLAN.
SSID Broadcast: While SSID Broadcast is enabled, all wireless clients will be
able to communicate with the access point. For secure purpose, user may
want to disable SSID broadcast to allow only those wireless clients with the AP
SSID to communicate with the access point
7.3 Status
This selection leads to view the status of the router LAN, WAN connections, and
view logs and statistics pertaining to connections and packet transfers.
7.3.1
Device Information
This screen leads to view the router LAN, Wireless and WAN configuration.
Firmware Version: Displays the latest build of the router firmware interface.
After updating the firmware in Tools - Firmware, check this to ensure that the
firmware was successfully updated.
44
LAN: This field displays the router's LAN interface MAC address, IP address,
subnet mask, and DHCP server status. Click “DHCP Table” to view a list of
client stations currently connected to the router LAN interface.
Wireless: Displays the router's wireless connection information, including the
router's wireless interface MAC address, the connection status, the SSID status,
which channel is being used, and whether WEP is enabled or not.
WAN: This field displays the router's WAN interface MAC address, DHCP client
status, IP address, subnet mask, default gateway, and DNS.
Click “DHCP Release” to release all IP addresses assigned to client stations
connected to the WAN via the router. Click “DHCP Renew” to reassign IP
addresses to client stations connected to the WAN.
7.3.2
Log
This screen leads to view a running log of router system statistics, events, and
activities. The log displays up to 200 entries. Older entries are overwritten by
new entries. The Log screen commands are as follows:
Click “First Page” to view the first page of the log
Click “Last Page” to view the final page of the log
Click “Previous Page” to view the page just before the current page
Click “Next Page” to view the page just after the current page
Click “Clear Log” to delete the contents of the log and begin a new log
Click “Refresh” to renew log statistics
Time: Displays the time and date that the log entry was created.
Message: Displays summary information about the log entry.
Source: Displays the source of the communication.
Destination: Displays the destination of the communication.
Note: Displays the IP address of the communication
45
7.3.3
Log Setting
This screen leads to set router logging parameters.
SMTP Server: Type the SMTP server address for the email that the log will be
sent to in the next field.
Send to: Type an email address for the log to be sent to. Click “Email Log
Now” to immediately send the current log.
Syslog Server: Type the IP address of the Syslog Server if user wants the
router to listen and receive incoming Syslog messages.
Log Type: Select what items will be included in the log:
●
System Activity: Displays information related to router operation.
●
Attacks: Displays information about any malicious activity on the network.
●
Dropped Packets: Displays information about packets that have not been transferred
successfully.
●
Notice: Displays important notices by the system administrator.
46
7.3.4
Statistic
This screen displays a table that shows the rate of packet transmission via the
router Wireless and WAN ports (in bytes per second).
Click “Reset” to erase all statistics and begin logging statistics again.
7.3.5
Wireless
This screen leads to view information about wireless devices that are
connected to the wireless router.
Connected Time: When the wireless device has been connected to the the
router.
MAC Address: Displays the devices wireless LAN interface MAC address.
47
7.4 Routing
This selection leads to set how the router forwards data: Static and Dynamic.
Routing Table enables user to view the information created by the router that
displays the network interconnection topology.
7.4.1
Static
It enables user to set parameters by which the router forwards data to its
destination if network has a static IP address.
Network Address: Type the static IP address which network uses to access
the Internet. ISP or network administrator provides this information.
Network Mask: Type the network (subnet) mask for network. If user does not
type a value here, the network mask defaults to 255.255.255.255. ISP or
network administrator provides this information.
Gateway Address: Type the gateway address for network. ISP or network
administrator provides this information.
Interface: Select which interface, WAN or LAN, used to connect to the Internet.
Metric: Select which metric to apply to this configuration.
Add: Click to add the configuration to the static IP address table at the bottom
of the page.
Update: Select one of the entries in the static IP address table at the bottom of
the page and, after changing parameters, click “Update” to confirm the
changes.
Delete: Select one of the entries in the static IP address table at the bottom of
the page and click “Delete” to remove the entry.
New: Click “New” to clear the text boxes and add required information to create
a new entry.
48
7.4.2
Dynamic
This screen leads to set NAT parameters.
NAT: Click the radio buttons to enable or disable NAT.
Transmit: Click the radio buttons to set the desired transmit parameters,
disabled, RIP 1, or RIP 2.
Receive: Click the radio buttons to set the desired transmit parameters,
disabled, RIP 1, or RIP 2
49
7.4.3
Routing Table
This screen leads to view the routing table for the router. The routing table is a
database created by the router that displays the network interconnection
topology.
Network Address: Displays the network IP address of the connected node.
Network Mask: Displays the network (subnet) mask of the connected node.
Gateway Address: Displays the gateway address of the connected node.
Interface: Displays whether the node is connected via a WAN or LAN.
Metric: Displays the metric of the connected node.
Type: Displays whether the node has a static or dynamic IP address
50
7.5 Access
This page leads to define access restrictions, set up protocol and IP filters,
create virtual servers, define access for special applications such as games,
and set firewall rules.
7.5.1
MAC Filters
Allow or deny Internet access to users within the LAN based upon the MAC
address of their network interface. Click the radio button next to “Disabled” to
disable the MAC filter.
Disable: Once the function of MAC filter is disabled, those listed in the MAC
Table are allowed Internet access.
Enable: All users are allowed Internet access except those users in the MAC
Table are deny Internet access.
MAC Table: Use this section to create a user profile which Internet access is
denied or allowed. The user profiles are listed in the table at the bottom of the
page. (Note: Click anywhere in the item. Once the line is selected, the fields
automatically load the item's parameters, which user edited.)
Name: Type the name of the user to be permitted/denied access.
MAC Address: Type the MAC address of the user's network interface.
Add: Click to add the user to the list at the bottom of the page.
Update: Click to update information for the user, if user has changed any of
the fields.
Delete: Select a user from the table at the bottom of the list and click “Delete”
to remove the user profile.
New: Click “New” to erase all fields and enter new information.
51
7.5.2
Protocol Filter
This screen enables user to allow and deny access based upon a
communications protocol list the user creates. The protocol filter profiles are
listed in the table at the bottom of the page.
Note: When selecting items in the table at the bottom, click anywhere in the
item. The line is selected, and the fields automatically load the item's
parameters, which user can edit:
Enable: Click to enable or disable the Protocol filter.
Name: Type the name of the user to be denied access.
Protocol: Select a protocol (TCP or UDP) to use for the virtual server.
Port Range: Type the port range of the protocol.
Add: Click to add the protocol filter to the table at the bottom of the screen.
Update: Click to update information for the protocol filter if user have selected a
list item and have made changes.
Delete: Select a list item and click Delete to remove the item from the list.
New: Click “New” to erase all fields and enter new information.
52
7.5.3
IP Filter
This screen enables user to define a minimum and maximum IP address range
filter; all IP addresses falling in the range are not allowed Internet access. The
IP filter profiles are listed in the table at the bottom of the page. (Note: Click
anywhere in the item. Once the line is selected, the fields automatically load the
item's parameters, which user can edit.)
Enable: Click to enable or disable the IP address filter.
Range Start: Type the minimum address for the IP range. IP addresses falling
between this value and the Range End are not allowed to access the Internet.
Range End: Type the minimum address for the IP range. IP addresses falling
between this value and the Range Start are not allowed to access the Internet.
Add: Click to add the IP range to the table at the bottom of the screen.
Update: Click to update information for the range if user has selected a list item
and have made changes.
Delete: Select a list item and click “Delete” to remove the item from the list.
New: Click “New” to erase all fields and enter new information.
53
7.5.4
Virtual Server
This screen leads to create a virtual server via the router. If the router is set as a
virtual server, remote users requesting Web or FTP services through the WAN
are directed to local servers in the LAN. The router redirects the request via the
protocol and port numbers to the correct LAN server. The Virtual Sever
profiles are listed in the table at the bottom of the page.
Note: When selecting items in the table at the bottom, click anywhere in the
item. The line is selected, and the fields automatically load the item's
parameters, which user edited.
Enable: Click to enable or disable the virtual server.
Name: Type a descriptive name for the virtual server.
Protocol: Select the protocol (TCP or UDP) used for the virtual server.
Private Port: Type the port number of the computer on the LAN that is being
used to act as a virtual server.
Public Port: Type the port number on the WAN that will be used to provide
access to the virtual server.
LAN Server: Type the LAN IP address that will be assigned to the virtual
server.
Add: Click to add the virtual server to the table at the bottom of the screen.
Update: Click to update information for the virtual server if user has selected a
list item and have made changes.
Delete: Select a list item and click “Delete” to remove the item from the list.
New: Click “New” to erase all fields and enter new information.
54
7.5.5
Special AP
This screen leads to specify special applications, such as games, that require
multiple connections that are inhibited by NAT. The special applications
profiles are listed in the table at the bottom of the page.
Note: When selecting items in the table at the bottom, click anywhere in the
item. The line is selected, and the fields automatically load the item's
parameters, which user edited.
Enable: Click to enable or disable the application profile. When enabled, users
will be able to connect to the application via the router WAN connection. Click
Disabled on a profile to prevent users from accessing the application on the
WAN.
Name: Type a descriptive name for the application.
Trigger: Defines the outgoing communication that determines whether the user
has legitimate access to the application.
●
Protocol: Select the protocol (TCP, UDP, or ICMP) that can be used to access the
application.
●
Port Range: Type the port range that can be used to access the application in the text
boxes.
55
Incoming: Defines which incoming communications users are permitted to
connect with.
●
Protocol: Select the protocol (TCP, UDP, or ICMP) that can be used by the incoming
communication.
●
Port: Type the port number that can be used for the incoming communication.
Add: Click to add the special application profile to the table at the bottom of the
screen.
Update: Click to update information for the special application if user has
selected a list item and have made changes.
Delete: Select a list item and click “Delete” to remove the item from the list.
New: Click “New” to erase all fields and enter new information.
7.5.6
DMZ
This screen leads to create a DMZ for those computers that cannot access
Internet applications properly through the router and associated security
settings.
Note: Any clients added to the DMZ exposes the clients to security risks such
as viruses and unauthorized access.
Enable: Click to enable or disable the DMZ.
DMZ Host IP: Type a host IP address for the DMZ. The computer with this IP
address acts as a DMZ host with unlimited Internet access.
Apply: Click to save the settings.
56
7.5.7
Firewall Rule
This screen leads to set up the firewall. The router provides basic firewall
functions, by filtering all the packets that enter the router using a set of rules.
The rules are in an order sequence list--the lower the rule number, the higher
the priority the rule has.
Enable: Click to enable or disable the firewall rule profile.
Name: Type a descriptive name for the firewall rule profile.
Action: Select whether to allow or deny packets that conform to the rule.
Inactive Timeout: Type the number of seconds of network inactivity that
elapses before the router refuses the incoming packet.
Source: Defines the source of the incoming packet that the rule is applied to.
●
Interface: Select which interface (WAN or LAN) the rule is applied to.
●
IP Range Start: Type the start IP address that the rule is applied to.
●
IP Range End: Type the end IP address that the rule is applied to.
Destination: Defines the destination of the incoming packet that the rule is
applied to.
●
Interface: Select which interface (WAN or LAN) the rule is applied to.
●
IP Range Start: Type the start IP address that the rule is applied to.
●
IP Range End: Type the end IP address that the rule is applied to.
●
Protocol: Select the protocol (TCP, UDP, or ICMP) of the destination.
●
Port Range: Select the port range.
Add: Click to add the rule profile to the table at the bottom of the screen.
57
Update: Click to update information for the rule if user has selected a list item
and have made changes.
Delete: Select a list item and click “Delete” to remove the item from the list.
New: Click “New” to erase all fields and enter new information.
Priority Up: Select a rule from the list and click “Priority Up” to increase the
priority of the rule.
Priority Down: Select a rule from the list and click “Priority Down” to
decrease the priority of the rule.
Update Priority: After increasing or decreasing the priority of a rule, click
“Update Priority” to save the changes.
7.6 Management
Management leads to set up Remote Management feature.
7.6.1
Remote Management
This screen leads to set up remote management. Using remote management,
the router can be configured through the WAN via a Web browser. A user name
and password are required to perform remote management.
HTTP: Enable or Disable user to management the WLAN Router form WAN
site, type a range of router IP addresses that can be managed from WAN site
Allow to Ping WAN Port: Enable or Disable user to Ping the WLAN Router
form WAN site, type a range of router IP addresses that can be pinged from
WAN site.
58
UPNP Enable: UPNP is short for Universal Plug and Play that is a networking
architecture that provides compatibility among networking equipment, software,
and peripherals. The Router is an UPnP enabled router and will only work with
other UPnP devices/software. If user does not want to use the UPnP
functionality, selecting “Disabled” can disable it.
Gaming mode: If user is experiencing difficulties when playing online games or
even certain applications that use voice data, user may need to enable Gaming
Mode for these applications to work correctly. When not playing games or using
these voice applications, it is recommended that Gaming Mode be disabled.
7.7 Tools
This page leads to restart the system, save and load different settings as
profiles, restore factory default settings, run a setup wizard to configure router
settings, upgrade the firmware, and ping remote IP addresses.
7.7.1
Restart
Click “Restart” to restart the system in the event the system is not performing
correctly.
59
7.7.2
Settings
This screen leads to save settings as a profile and load profiles for different
circumstances. User can also load the factory default settings, and run a setup
wizard to configure the router and router interface.
VPN Pass-Through: Choose enable or disable on the PPTP or IPSec.
Save Settings: Click to save the current configuration as a profile that user can
load when necessary.
Load Settings: Click “Browse” and go to the location of a stored profile. Click
“Load” to load the profile's settings.
Restore Factory Default Settings: Click to restore the default settings. All
configuration changes user has made will be lost.
60
7.7.3
Firmware
This screen leads to keep the router firmware up to date.
Please follow the below instructions:
1. Download the latest firmware from the manufacturer's Web site, and save it
to disk.
2. Click “Browse” and go to the location of the downloaded firmware file.
Select the file and click “Upgrade” to update the firmware to the latest
release
7.7.4
Ping Test
The ping test is to determine whether an IP address or host is present on the
Internet. Type the host name or IP address in the text box and click “Ping” to
start testing.
61
Technical Specifications
General
Standards
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.11g; IEEE 802.11b
Protocol
CSMA/CD
Radio Technology
IEEE 802.11g Orthogonal Frequency Division Modulation
Data Transfer Rate
802.11b: 1, 2, 5.5, 11Mbps (auto sense)
802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps @802.11g(auto sens
Ethernet: 10Mbps (half duplex), 20Mbps (full-duplex)
Fast Ethernet: 100Mbps (half duplex), 200Mbps (full- duplex)
Receiver Sensitivity
54Mbps: Typical -70dBm @ 10% PER (Packet Error Rate)
11Mbps: Typical -85dBm @ 8% PER (Packet Error Rate)
TX Power
15±2 dBm typically
Network Cables
10BASE-T: 2-pair UTP Cat. 3,4,5; EIA/TIA- 568 STP
100BASE-TX: 2-pair UTP Cat. 5; EIA/TIA-568 STP
Frequency Range
2400 ~ 2483.5 MHz ISM band
Modulation Schemes
DBPSK/DQPSK/CCK/OFDM
Security
64/128-bits WEP Encryption; WPA-PSK, WPA2-PSK
Channels
1 ~ 11 channels (FCC); 1 ~ 13 channels (ETSI);
1 ~ 14 channels (MKK)
Number of Ports
One Auto-MDIX 10/100Mbps Fast Ethernet port
Physical and Environmental
DC inputs
DC 5V/1.2A
Power Consumption
3W (Max)
Temperature
Operating: 0° ~ 40° C, Storage: -10° ~ 70° C
Humidity
Operating: 10% ~ 90%, Storage: 5% ~ 90%
Dimensions
62 x 81.5 x 18.5 mm (W x H x D) without Antenna
EMI:
FCC Class B, CE Mark B
62

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
XMP Toolkit                     : 3.1-702
Modify Date                     : 2006:10:30 10:35:10-08:00
Create Date                     : 2006:10:30 10:34:50-08:00
Metadata Date                   : 2006:10:30 10:35:10-08:00
Creator Tool                    : PScript5.dll Version 5.2
Format                          : application/pdf
Title                           : Microsoft Word - WLG-2008.doc
Creator                         : Cathy
Document ID                     : uuid:5e765e2d-eb2f-475a-a4e3-f4822f00a976
Instance ID                     : uuid:edfdfd72-4bc0-42f0-a9a7-e2f128c4454b
Producer                        : Acrobat Distiller 6.0 (Windows)
Page Count                      : 38
Author                          : Cathy

EXIF Metadata provided by EXIF.tools