Cameo Communications WTA268 Intel Wireless Display TV Adaptor User Manual 29072600WTA2680 WTA 268 QIG ai

Download:
Mirror Download [FCC.gov]
Document ID	1485370
Application ID	QP3KbQQNz97xX5CbiR++BA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.36kB (191971 bits)
Date Submitted	2011-06-17 00:00:00
Date Available	2011-06-17 00:00:00
Creation Date	2011-04-19 15:48:45
Producing Software	Acrobat Distiller 8.0.0 (Windows)
Document Lastmod	2011-06-14 14:13:08
Document Title	29072600WTA2680_WTA-268 QIG.ai
Document Creator	PScript5.dll Version 5.2
Document Author:	sandy_tseng

Quick Install Guide
Step 2
Connect the supplied power adapter to the back of the WiDi TV adapter and the other end to a power outlet
or surge protector. The WiDi TV adapter LED is red when it powers up. Then the LED turns yellow to indicate
it is ready, but is not yet connected to your computer.
TV Adaptor for Intel WiDi
Power on your TV and select the correct TV input source. Please refer to your TV documentation for
instructions on how to change your input source.
Step 4
Look through the FAQ contents for a topic that comes closest to describing your problem.
Closing the lid of the laptop may put the system to sleep or turn it off, and as a result, end the Intel Wireless Display
session. To close the lid and continue using the application:
The Startup screen displays on your TV within 30 seconds. If this screen does not appear, make sure your TV
is set to the correct video input and all the cables are firmly secured.
To change the adapter display language, use the recessed button while the adapter is on the ready screen shown.
• A short press (less than half a second) will step forward through the languages.
• A long press (more than half but less than one and a half seconds) will step backward through the languages.
The language change will immediately be reflected on your TV screen.
Step 5
Package Contents
Warning: Pressing the button for more than 5 seconds will clear the security profiles saved
in the adapter, which will require you to repeat the first-time connection procedure.
Launch the Intel® Wireless Display software on your laptop. Some laptops may have a button or key, or
launch from Windows. Click Start, type Intel® Wireless Display in the search field and then run the Intel®
Wireless Display software.
How do I Update the Firmware?
Step 6
Power Adapter
HDMI Cable
WTA-268 TV Adaptor
for Intel WiDi
Use the Intel® Wireless Display software to scan and find the TV adapter for Intel® WiDi . The screen below
shows that the Intel® Wireless Display software has found the wireless adapter.
If any of the above items are missing, please contact your reseller.
System Requirements
If the firmware needs updating, there will be an Update available button on the Adapter Properties page. (The
Properties button is only available if you are currently connected to an adapter.) Click the Update available button
to begin the update process. Once the update begins the TV screen will read Updating adapter. Please wait. After
the procedure is complete, the adapter automatically disconnects from the laptop. Scan again to connect to the
adapter.
How do I Reset the Application Settings?
• Requires a laptop with Intel® Wireless Display powered by select Intel® Core™ processors
• TV with a HDMI or AV Composite input
TV Adaptor for Intel WiDi
EAD5
Resetting reverts the application back to its out-of-the-box state. To reset, click Help and select About. Click Reset
Settings. To proceed with the reset, click the Yes button on the Reset Intel Wireless Display settings page.
WTA-268
Hardware Overview
After starting Intel Wireless Display, all detected adapters will be displayed as not previously connected. However, it
will not be necessary to enter a security code since the security settings are stored in the adapter.
Step 7
Double-click the TV adapter for Intel® WiDi TV adapter listed under Detected Adapters to connect to it. The LED on the
TV adapter will start flashing green.
If you are connecting the laptop to the WiDi TV adapter for the first time, it will display a 4-digit security code on the TV. Enter
this 4-digit security code into the Intel® Wireless Display software.
Can I Close the Laptop Lid and Still Use Intel Wireless Display?
How do I Change the Adapter Display Language
Step 3
Thank you for purchasing the WiDi TV Adapter. Follow the easy steps in this guide to properly set up your
device. Please verify that all the package contents listed below are available.
FAQs
1. Click the Windows Start icon and type Closing the lid in the search field.
2. Click the Change what closing the lid does link.
3. Next to the When I close the lid heading and under both the On battery and Plugged in headings, select Do
nothing.
4. Click the Save changes button.
What are Adapter Properties?
Adapter Properties Definitions
• Adapter Name. This is either the default factory name or the name you choose in the initial set up process. It is
okay to change the name at anytime. Just type a new name. If the default “Name” is deleted and the field is left
empty, the application will restore the name to the previous value. NOTE: The valid character set for adapter names
are upper and lower case letters A through Z, numbers and punctuation marks, also defined as ASCII characters 32
through 126.
• Network address. This is the IP (Internet Protocol) address.
• Adapter ID. A preset and unchangeable number set by the adapter.
• Adapter Model. This is the model name of the adapter currently connected.
• Adapter firmware version. The version of the application. If a Web update is required, click the Update
Available button.
• Register. Register your adapter to obtain support and get the latest software updates.
Audio/Visual Tuning.
• Adjust the TV Display Image. If the laptop display is cropped or not filling the entire TV screen check here.
• Audio test. To troubleshoot audio problems check here.
How do I Reset the Adapter?
If the adapter is not responding correctly, and resetting the application has not helped, try restarting the adapter. Push
the power button once to turn the adapter off, and push it again to turn it on. After the To get started screen appears
on the TV, rescan before trying to connect.
Setup Button (Recessed)
S/PDIF Digital Audio Port
HDMI Port
On/Off Button
Composite Audio/Video Ports
Power Connector
Step 8
The TV screen will display your laptop screen and the LED on the WiDi TV adapter will turn solid green. Your device is now
ready to use.
How do I Clear the Adapter Memory?
Clearing the adapter’s memory erases security settings and the user modified adapter name. This is helpful if you
choose to sell your adapter, or if a neighbor came to your house and connected to your adapter, but now you do not
want them to accidentally connect from their house.
To clear the adapter’s memory, press and hold the setup button on the back of the adapter for more than 5 seconds or
until the LED starts blinking. Clearing the adapter memory requires you to enter the security code displayed on the
TV in order to connect again.
Installation
Step 1
Connect the WiDi TV adapter to your TV. Use the HDMI connection for the best quality video.
HDMI Input
HDMI Cable
TV
Power Adapter
Outlet
WTA-268
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Laptop
29072600WTA2680
Europe – EU Declaration of Conformity
EN60950-1: 2009
Safety of Information Technology Equipment
EN 50385: 2008
Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic
fields (0 Hz – 300GHz)
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The availability of some specific channels and/or operational frequency bands are country dependent and are
firmware programmed at the factory to match the intended destination.
Česky [Czech]
[Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se základními požadavky a
dalšími příslušnými ustanoveními směrnice 1999/5/ES.
Dansk [Danish]
Undertegnede [fabrikantens navn] erklærer herved, at følgende udstyr [udstyrets typebetegnelse]
overholder de væsentlige krav og øvrige rel evante krav i direktiv 1999/5/EF.
EN 300 328 V1.7.1 (2006-10)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data
transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques;
Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
Deutsch
[German]
EN 301 489-1 V1.8.1 (2008-04)
Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services; Part 1: Common technical requirements
EN 301 489-17 V2.1.1 (2009-05)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission
systems and 5 GHz high performance RLAN equipment
This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states
and EFTA countries, except in France and Italy where restrictive use applies.
In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications
and/or network services.
Latviski
[Latvian]
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test
methods have been applied in order to prove presumption of conformity with the essential requirements of the
R&TTE Directive 1999/5/EC:
For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor environment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This device may not be used for setting up outdoor radio links in France and in some areas the RF output power
may be limited to 10 mW EIRP in the frequency range of 2454 – 2483.5 MHz. For detailed information the
end-user should contact the national spectrum authority in France.
Hiermit erklärt [Name des Herstellers], dass sich das Gerät [Gerätetyp] in Übereinstimmung mit
[Lithuanian]
Nederlands
[Dutch]
Malti [Maltese]
Käesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme tüüp = type of
equipment] vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele
Magyar
[Hungarian]
Polski [Polish]
teistele asjakohastele sätetele.
English
1999/5/EB Direktyvos nuostatas.
Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in overeenstemming is met
de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott] jikkonforma mal-ħtiġijiet
Alulírott, [gyártó neve] nyilatkozom, hogy a [... típus] megfelel a vonatkozó alapvetõ
követelményeknek és az 1999/5/EC irányelv
egyéb elõírásainak
Niniejszym [nazwa producenta] oświadcza, że [nazwa wyrobu] jest zgodny z zasadniczymi
wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
Português
[Portuguese]
[Spanish]
Šiuo [manufacturer name] deklaruoja, kad šis [equipment type] atitinka esminius reikalavimus ir kitas
Hereby, [name of manufacturer], declares that this [type of equipment] is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
Español
atbilst Direktīvas 1999/5/EK bū tiskajām prasībām un citiem ar to saistītajiem noteikumiem.
essenzjali u ma provvedimenti oħrajn relevanti-li hemm fid Dirrettiva 1999/5/EC.
den grundlegenden A nforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie
1999/5/EG befindet.
Eesti [Estonian]
Lietuvių
Ar šo [name of manufacturer / izgatavotāja nosaukums] deklarē, ka [type of equipment / iekārtas tips]
[Nome do fabricante] declara que este [tipo de equipamento] está conforme com os requisitos
essenciais e outras disposições da Directiva 1999/5/CE.
Por medio de la presente [nombre del fabricante] declara que el [clase de equipo] cumple con los
requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva
1999/5/CE.
Slovensko
[Slovenian]
[Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi
relevantnimi določili direktive 1999/5/ES.
The firmware setting is not accessible by the end user.
Ελληνική [Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ [name of manufacturer] ΔΗΛΩΝΕΙ ΟΤΙ [type of equipment]
ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ
Slovensky
[Slovak]
[Meno výrobcu] týmto vyhlasuje, že [typ zariadenia]
ustanovenia Smernice 1999/5/ES.
ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Suomi [Finnish]
Français [French]
Par la présente [nom du fabricant] déclare que l'appareil [type d'appareil] est conforme aux
tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden
exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Italiano [Italian]
Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio] è conforme ai
requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
[Valmistaja = manufacturer] vakuut taa täten että [type of equipment = laitteen tyyppimerkintä]
ehtojen mukainen.
Svenska
[Swedish]
Härmed intygar [företag] att denna [utrustningstyp] står I överensstämmelse med de väsentliga
egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : 3.1-701
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2011:06:14 14:13:08+08:00
Create Date                     : 2011:04:19 15:48:45+08:00
Metadata Date                   : 2011:06:14 14:13:08+08:00
Format                          : application/pdf
Title                           : 29072600WTA2680_WTA-268 QIG.ai
Creator                         : sandy_tseng
Producer                        : Acrobat Distiller 8.0.0 (Windows)
Document ID                     : uuid:d577624b-d98f-4b84-9f1c-2408884e8a6e
Instance ID                     : uuid:99e7501c-c6ae-425f-b8ab-2bde7bf4fee4
Page Count                      : 1
Author                          : sandy_tseng

EXIF Metadata provided by EXIF.tools