Camos CAMOS-BHS500 MOTORCYCLE BLUETOOTH SYSTEM User Manual BHS 600 manual ENG A5

Camos Co., Ltd. MOTORCYCLE BLUETOOTH SYSTEM BHS 600 manual ENG A5

users manual

INSTRUCTION MANUALPrinted in KoreaVer. 1.0BHS-600 / BHS-500INSTRUCTION MANUALMOTORCYCLE BLUETOOTH SYSTEM
Thank you for purchasing our product.  This manual is for BHS-600 / BHS-500. Please read this instruction manualthoroughly for proper usages and application before connecting and operatingthe equipment.CAMOS owns all intellectual property rights including copyrights instructionmanual, hardware and related software of BHS-600 / BHS-500 which will beprotected by the Copyright Act. Without CAMOS's written permission, theycannot be copied, re-printed or translated into other languages.Design and specifications are subject to change with notice.Manufacture would not take any responsibilities on the sales of products norentrust the responsibilities to the 3rd party. Product warranty shall not applyto any failure or malfunction which results from improper maintenance,operation, unauthorized modification of product.CAMOS warrants the quality of product for a one year. Though the productis still under warranty period, repairing of products results from any of thefollowing events;  Warranty only covers the manufactured goods. Repairs after warranty periodis finished, repairs will be charged to the users. Please contact the distributorand service center for A/S.1) Improper maintenance2) Modification or replace of parts in the user's disposition3) Using improper power source4) Natural disaster including flood, fire, and earthquake5) Replacement of expendable partsPreliminary RemarksWarranty3CONTENTSCompositionHeadset chargeProduct function checkName and function of each partKEY operating time and beep operating stateHeadset mounting and dismountingHeadset custody......................................................................6..................................................................6........................................................7............................................8...........................9.......................................9.................................................................9PREPARATIONHeadset power ON/OFFVolume UP/DOWNHeadset registration and connection methodFunction directions  _To answer the phone  _To call  _To listen to music  _To talk  _To talk between music playing  _To speak over the telephone between music playing  _To speak over the telephone between conversation......................................................10.............................................................10..........................10......................................................12.........................................................................12...........................................................13.........................................................................13..........................................14..............14..............15OPERATIONBattery charging and standard use timeSpecification and featureFAQ.................................16....................................................16................................................................................16APPENDIXSafety rules .......................................................................4SAFETY RULES
Please read the “Safety Rules” carefully before using this product. Following of the safetyrules prevents users from any damage related with the misuse of this product. It is veryimportant that users follow these safety rules. We state “Caution” and “Warning” to clarifyany potential for damage associated with misuse of the product.May cause bodily harm or evendeath if users ignore warningsin the safety rules.Warning About signs“Precautions”“Do Not”“Follow Directions Carefully”SAFETY RULESMay cause bodily harm or evendeath if users ignore cautionsin the safety rules.CautionPlace the product where it doesn’t prevent the driver from driving.- The driver’s view of sight should not be blocked.Do not use unapproved power voltage.- This may cause fire or electric shock.Do not use in bathtub. Do not pull the plug with wet hands.- This may cause electric shock.Do not get product wet and operate with wet hands.- This may cause electric shock.Do not use damaged electric cord.- This may cause fire and(or) electric shock.Be careful when thunder and lightening occurs.- There is a danger of electric shock.Do not attempt to open, disassemble or repair the product by any personexcept an authorized service dealer.- This may cause electric shock and(or) malfunction. You should request  an authorized service dealer for any inspection and repair of the product.Do not put pins or needles into the product or electric cord of product.- If this happens, stop the product operation immediately. Continuous  use may cause fire, electric shock and(or) malfunction.Do not get product wet and operate with wet hands.- This may cause electric shock.SAFETY RULESStop using the product immediately when you drop it or damage theoutside shell.- Continuous use may cause fire, electric shock and(or) malfunction.WarningCautionDo not put the product in place where sudden temperatureincrease occurs such as the vehicle’s dashboard.If you find any strange occurrences or malfunction in the productor any foreign substance gets into the product, please contact theauthorized retailer where you purchased the product.Do not use the product in the following locations.     In direct rays of the sun and near heating products     High in humidity and with bad ventilation     Dusty or oily locations     Low temperatures     Unstable environment    - This may cause malfunction.Keep the product strongly in the helmet.- It may cause to separate from the helmet.Clean the product often.- Dust in the area may cause fire.Do not place elctric cord near a heating product.- The cord surface may melt and cause fire and(or) electric shock.Unplug the product and remove cords when moving.- It may damage cords and cause fire and(or) electric shock.Do not pul the cord line when you unplug it.- Damaged cords may cause fire and(or) electric shock.Unplug the product when you don’t use it for a long time.- Damaged cords may cause fire and(or) electric shock.Do not place the product where high temperature and(or) the direct rayof the sun occurs.- This may cause fire, electric shock and(or) mal ion.functDo not put the product in an unstable place where the product may beexposed to shock and(or) impact.- The product may fall and be damaged.Keep electric cord properly positioned.- An improperly positioned electric cord may cause fire or  electric shock  when metal material is in contact with power source.4 5
Phone Feature∙ Stop music function∙ Play music function∙ Volume control(UP/DOWN)Music Feature∙ Conversation function between Driver and Passenger ∙ Mobilephone call function during the conversation between the Driver  and Passenger. - Since phone call is on priority, the Driver and Passenger  conversation will be on mute during the call∙ Stop talk function∙ Start talk functionTalk Feature• CompositionLi-Polymer Battery is included  to this Headset. Use to fill up perfectly Battery afterbuying product.∙ Display device : RED LED∙ When it is charging RED LED is lighted up, and when it is ended RED LED is turned  off lights.∙ Separate charger and Headset when LED is turned off lights.∙ When battery is lack, Beep sound rings until charged.∙ Auto answer call function∙ Dialing function   _Last number redialing   _Transfer Dialing   _Voice Dialing∙ End Call function∙ Volume control(Up/Down)Should use the DC adapter provided by CAMOS.It could be occurred breakdown or damage if use adaptorthat is not approved.Bracket ABluetooth InstructionManualDC AdaptorCharger67PREPARATION PREPARATIONMicrophone AEarphoneDual Side Adhesive Tape• Product function check• Headset chargeBHS-600 / BHS-500INSTRUCTION MANUALMOTORCYCLE BLUETOOTH SYSTEMMicrophone BBracket B(By Clip)Dual sideAdhesive tape(By Dual side adhesive tape)
1. Name of each partDC INGREEN LED(Only BHS-600)(+) KEYRED LED(-) KEYTALK KEYPAIRING SWITCH(CH1, CH2 / Only BHS-600)MASTER / SLAVE SWITCH(Only BHS-600)BRACKET A Type8 9PREPARATION PREPARATION• Name and function of each part • KEY operating time and Beep operating state2. Function of each part∙ Short press in case there is no specified mention about time.∙ Volume Down∙ When disconnected at passage 30 minutes after  Link loss state, Reconnecting attempt∙ Volume UP∙ When disconnected at passage 30 minutes after  Link loss state, Reconnecting attempt∙ Power ON / OFF : Press for 3 sec.∙ Volume UP∙ When disconnected at passage 30 minutes after  Link loss state, Reconnecting attempt∙ Last number redialing∙ Transfer dialing : Press for 2 sec.∙ Voice dialing : Press for 2 sec.∙ End call∙ CH1 PAIRING (CH2 → CH1 switching)Master  ↔ Slave switching∙ Function that do Power OFF in various active states∙ Talk Start / Stop : at same time  press for 1 sec.TALKPAIRING(Slide Switch)RESET KEY(-)KEY + (+)KEY–––234561/∙ CH1 PAIRING (CH1 → Ch2 switching)∙ Music Play / Stop : at same time  press for 3 sec.–––NoKEY CH 1 CH 2FUNCTION∙ Power ON / OFF : Press for 3 sec.∙ Volume Down∙ When disconnected at passage 30 minutes after  Link loss state, Reconnecting attemptMASTER / SLAVE(Slide Switch)(+)KEY(-) KEY1) During action, even if SLIDE SWITCH is located to CH1 or CH2, do not return to Pairing even if power goes to OFF → ON.2) When CH1 is pairing with other devices, SLIDE SWITCH position moves to CH2(within 3 seconds) and again moves to CH1.    Then after 3 sec. Paring works.3) CH2 is action equally with upside.Operation state Operation KEY KEY operating timeBeepFor 2 sec. lighting then  Stand by (RED LED)LED(Red)  operationCH1 Power ONCH2 Power ONStand - BYCH1 Power OFFCH2 Power OFFPAIRING AttemptPAIRING DoneLast Number DialingTransfer DialingVoice DialingEnd CallMusic Play / StopTalk Start / StopLow Battery Warning(-) KEY(+) KEY(-) KEY(+) KEYPAIRING SwitchTALKTALKTALKTALK(-)KEY + (+)KEY(-)KEY + (+)KEY3 sec.3 sec.3 sec.3 sec.3 sec. LaterShort Push2 sec.2 sec.Short PushAt same time 3 sec.At same time 1 sec.At 100ms once blinking per 1 sec.At 100ms 2 sec. intervals blinking then lighting-out (RED LED)At 100ms 2 sec. intervals blinking then lighting-out (GREEN LED)At 100ms 3 min.  blinking → as failed,  at 100ms once blinking per 1 sec.At 100ms twice blinking per 1 sec.Until charging, at 30 sec. intervals  BeepDI, RI, RINGDI, RI, RINGDI, RI, RI~DI, RI, RI~PI, RI, RI, RI, RINGDING, DING, DING 30 sec. Intervals––––––––––––––––––––––––––––––––––––For 2 sec. lighting then  Stand by (GREEN LED)PI, RI, RI, RI∙ Keep where power secures by state that turn off.∙ Keep to avoid high temperature, direct ray of light, lower than 50℃ or hot vehicles inside etc.  Performance of product is fallen if keep at high temperature and Battery life  can decrease.∙ Parts offered with product keep in dry place that moisture or moisture does not exist.• Headset mounting and dismounting• Headset custodyBRACKET B TypeI-1. Fix the bracket(A type) firmly      in the back of the helmet by using      dual side adhesive tape.II. Push up the Bluetooth main body    into the bracket.I-2. Fix the bracket(B type) in the lower part of the helmet by using clips provided.      Refer to the figure below. Joining the Bluetooth main body with bracket      is the same as above(Braket A).RESET KEY
10 11OPERATION OPERATIONThis Headset is operated particularly CHs with POWER ON/OFF as below.When POWER ON,  press the preferred CH's KEY for 3 sec. then be POWER ON.Press again for 3 sec. then be POWER OFF.(Details contents : 9 page KEY operating Time and Beep operating state)Press (+)KEY or (-)KEY to control volume while operates.Should register Headset to Bluetooth device(ex. Cellular phone) to use Headset.Registration is process connecting via certification that is encrypted between two devicesthat Bluetooth function is.∙ Select "CAMOS BHS-600(BHS-500)" in searched device list.∙ Should connect to Bluetooth device that register to connect  (or, after connection cancellation) Headset after registration.1) Power ON Headset CH1[press (-) KEY for 3 sec.].2) Change [Pairing Switch] to CH2 for Headset CH1's pairing then change again to CH1.3) Refer to the instruction manual of cellular phone and then connect Headset after    searching and registration.1. Connecting Headset with cellular phone1) Power ON Headset CH1[press (-) KEY for 3 sec.].2) Change [Pairing Switch] to CH2 for Headset CH1's Pairing then change again to CH1.3) Refer to the instruction manual of Audio device and then connect Headset after    searching and registration.1) On a Headset should change [Master/Slave Switch] toward Slave and Press (+)key    for 3 seconds to put the power on. Change [Pairing Switch] toward CH1 then again    toward CH2.2) On the other Headset should change [Master/Slave Switch] toward  Master and    Press (+)key for 3 seconds to put the power on. Change [Pairing Switch ] toward    CH1 then again toward CH2. ∙ Connect with CH1 of Headset when use to connect Headset with Bluetooth device.  (ex. Cellular phone)∙ Connect with CH2 of Headset when use to connect Headset with Headset.  (this CH2 of Headset does not available to connect with other Bluetooth devices)∙ When connect with a preferred device, at first POWER OFF the connected Bluetooth.  (When Headset is already connected with other device it does not operate Pairing Mode)∙ Once connected device is connected automatically when POWER ON.(-) KEY ∙ Power ON : Press for 3 sec.∙ Power OFF : Press for 3 sec.(+) KEY ∙ Power ON : Press for 3 sec.∙ Power OFF : Press for 3 sec.CH 1 CH 2––––––2. Connecting Headset with Audio Device3. Connecting Headset with Headset : between CH2 and CH2Volume control is available in operation state.Remark : The volume lever for the conversation between CH2 is fixed,                 therefore volume is not adjustable. ∙ In order to disconnect the audio device, uncheck the bluetooth option on  the audio device. Turn off the headset power and it will be automatically  connected when the power is back on.• Headset POWER ON/OFF• Volume UP/DOWN• Headset registration and connection method∙ Refer to the Instruction manual of cellular phone to replay music files that  is built-in to cellular phone and to listen to music.∙ In order to disconnect the cellular phone, uncheck the bluetooth option  on the cellular phone. Turn the headset power and bluetooth will be  automatically connected with audio device when the power is back one.
12 13OPERATION OPERATION1) When completed the connection Headset with Celluar phone, become to answer /    to call state.2) The function of Auto Answer Call is included this Headset, does not need additional    key operating to answer because is received automatically.3) Press [TALK KEY] shortly to disconnect on a headset.1. To answer the phone• Function directionBased on kinds of Cellular phone,  maybe only MP3 file s areplayed Check the format if the stored music file s are MP3 or not.1) Last Number Dialing  _Shortly press [Talk KEY] to use the function of last number dialing.2) Call Transfer  _If press [TALK KEY] for 2 sec. in current cellular phone calling , telephone is    connected to Headset.  _If press [TALK KEY] for 2 sec. again, can move to current cellular phone calling.3) Voice Dialing  _If press  [TALK KEY] for 2 sec., voice information is announced.    This time, should operate following voice information to call.2. To call∙ Please refer to the instructional manual of each cellular phone for voice  dialing. Voice Dialing option of bluetooth is only available for the cellular  phones that has the voice dialing option and registered for the stereo  headset service.∙ If cellular phone is disconnected due to the long distant between the  headset and cellular phone  the call will be automatically connected when  these two equipments get near within distance of 10m within 30min.∙ When 30 minutes are passed, press [(+)KEY or (-)KEY] shortly.  It will be re-connected, starting receiving signals again.  When failed to connect, POWER OFF then ON again for pairing.3. To listen to music1) To listen to music files stored to a cellular phone through Headset  _Connect Headset with Cellular phone( Audio built-in).  _Please refer to the cellular phone manual to find how to select the "mp3" mode    to play.  _To stop the music press [(-)KEY] and [(+)KEY] for 3 sec at same time.  _To play the music again press [(-)KEY] and  [(+)KEY] for 3 sec. at same time.2) To listen to music files stored to an Audio Device through Headset  _Connect Headset with an Audio device.  _Please refer to the audio device manual to play the music.  _To stop the music press [(-)KEY] and [(+)KEY] for 3 sec. at same time.  _To listen the music press [(-)KEY] and  [(+)KEY] for 3 sec. at same time.∙ Even if press [(-)KEY] and [(+)KEY] for 3 sec. at same time then music  is stopped, the Audio Device is playing continuously.∙ Based on kinds of Cellular phone, maybe only MP3 files are played.∙ Stopping / Playing by pressing [(-)KEY] and [(+)KEY] for 3 seconds is  only possible on "MUSIC MODE"._When completed to connect Headset(CH2) with Headset(CH2), become to Talk._To stop to Talk, press [(-)KEY] and [(+)KEY] for 1 sec. at same time._To talk again, press [(-)KEY] and [(+)KEY] for 1 sec. at same time.4. To talk∙ The volume of conversation between CH2 is not adjustable.
14 15OPERATION OPERATION_Connect Headset with Cellular phone or Audio Device then make to listen to music._Connect Headset(CH2) with Headset(CH2) then make to Talk._When sensed the Audio signal while listen to music, Music is in Mute state and become  to talk between Headsets._To stop to talk press [(-)KEY] and [(+)KEY] for 1 sec. at same time. This time, start  again after 10 sec. to listen to music of Mute state._To talk again, press  [(-)KEY] and [(+)KEY] for 1 sec. at same time.5. To talk between music playing∙ If CH2 conversation is started in the middle of playing the mp3, the music  will turn to mute mode.∙ After or during the conversation, if there is no sound for 10 seconds, music  will be play with proper volume.1) To speak over the telephone between playing music files stored to Cellular phone  _Connect Headset with Cellular phone built-in Audio, then make to listen to music.  _Connect Headset with Cellular phone.  _If there is an in-coming call while music is played, the music will be stopped and turn to   conversation mode.6. To speak over the telephone between music playing2) To speak over the telephone while replay the music files stored to Audio Device  _At first, register Headset to cellular phone.  _Release Bluetooth mode of cellular phone.  _Connect Headset with audio device then make listen to music.  _Set up Bluetooth ON mode of cellular phone so that connect Headset with cellular phone.  _When in-coming the signal of cellular phone while listen to music, music is disconnected     then start to speak over the telephone._Connect Headset(CH2) with Headset(CH2) then make to Talk._Connect Headset with Cellular phone._If there is an in-coming call to the cellular phone, the conversation will be on mute  for the cellular phone call._When the call is hung up, conversation mode will be back on.7. To speak over the telephone between conversation∙ When the user hangs up the phone call by pressing [TALK KEY] on the headset   shortly, the stopped audio device will be back on the playing mode.∙ If the user dials to make a phone call by pressing the [TALK KEY], the music  would not be played automatically. If the user desires to play the music,  press [(+) and (-) KEY] at the same time for 3 seconds.∙ When the user hangs up the phone call by pressing [TALK KEY] on the  headset shortly, the stopped audio device will be back on the playing mode.∙ In order to connect the headset with Audio device and cellular phone at  the same times, please use the audio device that only supports the stereo.∙ When press once [TALK KEY] shortly, the music is disconnected and cellular  phone returns to call to last number based on kinds of cellular phone, should  press twice [TALK KEY].∙ If power is turned off or the cellular phone is away from the headset for more  than 10m while music is being played, note that these two devices will be  disconnected and the music will become mute.∙ Conversation and phone call at the same time is not allowed.
16 17APPENDIX REGULATORY INFORMATION• Battery charging and standard use time• Specification and FeatureCharging time Standard use timeAbout 2 hours Stand-BY time Speak / Play / Conversation Play + Conversation180 hours 13 hours 8 hoursDevice nameBluetooth versionSupported Bluetooth profileFrequency rangeTransmission outputWireless use distanceDimensionWeightOperating temperatureAdapter inputAdapter outputWireless Data Communication System(BHS-600 / BHS-500)Version 2.0HFP, HSP, A2DP, AG profile2.402 ~ 2.480MHz0.25 ~ 2.5mWAt max 10m51(W) x 90(H) x 20.5(D) mm120g-20 ~ 50℃AC 100 ~ 240V, 50/60HzDC 5V, 500mA• FAQ (Frequently Asked Questions)• FCC compliance InformationThis device complies with part 15 of FCC Rules.Operation is subject to the following two conditions:  1. This device may not cause harmful interference, and  2. This device must accept any interference received.Including interference that may cause undesired operation.• Information to UserThis equipment has been tested and found to comply with the limits for a Class B digital device,Pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation.This equipment generates, uses and can radiate radio Frequency energy and, if not installed andused in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures ;  - Reorient or relocate the receiving antenna.  - Increase the separation between the equipment and receiver  - Connect the equipment into an outlet on a circuit different from that to which the    receiver is connected.  - Consult the dealer or an experienced radio/TV technician for help.• FCC WARNINGThis equipment may generate or use radio frequency energy. Changes or modifications to thisequipment may cause harmful interference unless the modifications are expressly approved inthe instruction manual. The user could lose the authority to operate this equipment if anunauthorized change or modification is made.Hereby,  , declares that this  is in compliance with the essential requirements and other relevantprovisions of Directive 1999/5/EC.[CAMOS] [Motorcycle Bluetooth System(BHS-500/BHS-600)]
18 19MEMO MEMO

Navigation menu