Camos CAMOS-BHS500 MOTORCYCLE BLUETOOTH SYSTEM User Manual BHS 600 manual ENG A5

Download:
Mirror Download [FCC.gov]
Document ID	782643
Application ID	49GTaVjyYrFBscphUXkPrg==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	19.96kB (249503 bits)
Date Submitted	2007-04-19 00:00:00
Date Available	2007-06-04 00:00:00
Creation Date	2007-03-30 18:36:29
Producing Software	Corel PDF Engine Version 1.0.0.536
Document Lastmod	2007-03-30 18:36:29
Document Title	BHS-600_manual(ENG)_A5.cdr
Document Creator	CorelDRAW 버전 12.0

BHS-600 / BHS-500
MOTORCYCLE BLUETOOTH SYSTEM
INSTRUCTION MANUAL
INSTRUCTION MANUAL
Ver. 1.0
Printed in Korea
CONTENTS
Preliminary Remarks
Thank you for purchasing our product.
This manual is for BHS-600 / BHS-500. Please read this instruction manual
thoroughly for proper usages and application before connecting and operating
the equipment.
SAFETY RULES
Safety rules .......................................................................4
PREPARATION
CAMOS owns all intellectual property rights including copyrights instruction
Composition ......................................................................6
manual, hardware and related software of BHS-600 / BHS-500 which will be
Headset charge ..................................................................6
protected by the Copyright Act. Without CAMOS's written permission, they
Product function check ........................................................7
cannot be copied, re-printed or translated into other languages.
Name and function of each part
............................................8
KEY operating time and beep operating state ...........................9
Design and specifications are subject to change with notice.
Headset mounting and dismounting .......................................9
Headset custody .................................................................9
Warranty
OPERATION
Manufacture would not take any responsibilities on the sales of products nor
Headset power ON/OFF ......................................................10
entrust the responsibilities to the 3rd party. Product warranty shall not apply
Volume UP/DOWN .............................................................10
Headset registration and connection method ..........................10
to any failure or malfunction which results from improper maintenance,
operation, unauthorized modification of product.
Function directions
CAMOS warrants the quality of product for a one year. Though the product
is still under warranty period, repairing of products results from any of the
following events;
1) Improper maintenance
2) Modification or replace of parts in the user's disposition
3) Using improper power source
_To answer the phone ......................................................12
_To call .........................................................................12
_To listen to music ...........................................................13
_To talk .........................................................................13
_To talk between music playing ..........................................14
_To speak over the telephone between music playing ..............14
_To speak over the telephone between conversation ..............15
4) Natural disaster including flood, fire, and earthquake
5) Replacement of expendable parts
APPENDIX
Warranty only covers the manufactured goods. Repairs after warranty period
Battery charging and standard use time .................................16
is finished, repairs will be charged to the users. Please contact the distributor
Specification and feature ....................................................16
and service center for A/S.
FAQ ................................................................................16
SAFETY RULES
SAFETY RULES
Please read the “Safety Rules” carefully before using this product. Following of the safety
rules prevents users from any damage related with the misuse of this product. It is very
important that users follow these safety rules. We state “Caution” and “Warning” to clarify
any potential for damage associated with misuse of the product.
About signs
Warning May cause bodily harm or even
death if users ignore warnings
in the safety rules.
Caution
“Precautions”
May cause bodily harm or even
death if users ignore cautions
in the safety rules.
Caution
Do not put the product in place where sudden temperature
increase occurs such as the vehicle’s dashboard.
Keep the product strongly in the helmet.
- It may cause to separate from the helmet.
“Do Not”
Clean the product often.
- Dust in the area may cause fire.
“Follow Directions Carefully”
Do not place elctric cord near a heating product.
- The cord surface may melt and cause fire and(or) electric shock.
Unplug the product and remove cords when moving.
- It may damage cords and cause fire and(or) electric shock.
Warning
Place the product where it doesn’t prevent the driver from driving.
- The driver’s view of sight should not be blocked.
Do not use in bathtub. Do not pull the plug with wet hands.
- This may cause electric shock.
Do not use unapproved power voltage.
- This may cause fire or electric shock.
Do not get product wet and operate with wet hands.
- This may cause electric shock.
Do not use damaged electric cord.
- This may cause fire and(or) electric shock.
Be careful when thunder and lightening occurs.
- There is a danger of electric shock.
Do not get product wet and operate with wet hands.
- This may cause electric shock.
Do not put pins or needles into the product or electric cord of product.
- If this happens, stop the product operation immediately. Continuous
use may cause fire, electric shock and(or) malfunction.
Stop using the product immediately when you drop it or damage the
outside shell.
- Continuous use may cause fire, electric shock and(or) malfunction.
Do not attempt to open, disassemble or repair the product by any person
except an authorized service dealer.
- This may cause electric shock and(or) malfunction. You should request
an authorized service dealer for any inspection and repair of the product.
Do not pul the cord line when you unplug it.
- Damaged cords may cause fire and(or) electric shock.
Unplug the product when you don’t use it for a long time.
- Damaged cords may cause fire and(or) electric shock.
Do not place the product where high temperature and(or) the direct ray
of the sun occurs.
- This may cause fire, electric shock and(or) malfunction.
Do not put the product in an unstable place where the product may be
exposed to shock and(or) impact.
- The product may fall and be damaged.
Keep electric cord properly positioned.
- An improperly positioned electric cord may cause fire or electric shock
when metal material is in contact with power source.
If you find any strange occurrences or malfunction in the product
or any foreign substance gets into the product, please contact the
authorized retailer where you purchased the product.
 Do not use the product in the following locations.
- This may cause malfunction.
 In direct rays of the sun and near heating products
 High in humidity and with bad ventilation
 Dusty or oily locations
 Low temperatures
 Unstable environment
PREPARATION
PREPARATION
• Composition
• Product function check
Phone Feature
Music Feature
BHS-600 / BHS-500
MOTORCYCLE BLUETOOTH SYSTEM
Dual side
Adhesive tape
INSTRUCTION MANUAL
∙ Auto answer call function
∙ Stop music function
∙ Dialing function
∙ Play music function
_Last number redialing
∙ Volume control(UP/DOWN)
_Transfer Dialing
Bluetooth
Bracket A
Bracket B
(By Dual side adhesive tape)
(By Clip)
DC Adaptor
Charger
Instruction
Manual
_Voice Dialing
∙ End Call function
∙ Volume control(Up/Down)
Talk Feature
∙ Conversation function between Driver and Passenger
∙ Mobilephone call function during the conversation between the Driver
Earphone
Microphone A
Microphone B
Dual Side Adhesive Tape
and Passenger. - Since phone call is on priority, the Driver and Passenger
conversation will be on mute during the call
∙ Stop talk function
∙ Start talk function
• Headset charge
Li-Polymer Battery is included to this Headset. Use to fill up perfectly Battery after
buying product.
∙ Display device : RED LED
∙ When it is charging RED LED is lighted up, and when it is ended RED LED is turned
off lights.
∙ Separate charger and Headset when LED is turned off lights.
∙ When battery is lack, Beep sound rings until charged.
Should use the DC adapter provided by CAMOS.
It could be occurred breakdown or damage if use adaptor
that is not approved.
PREPARATION
PREPARATION
• Name and function of each part
• KEY operating time and Beep operating state
Operation state Operation KEY KEY operating time
1. Name of each part
GREEN LED
(Only BHS-600)
RED LED
BRACKET A Type
(+) KEY
(-) KEY
3 sec.
For 2 sec. lighting then Stand by (RED LED)
DI, RI, RING
CH2 Power ON
(+) KEY
3 sec.
For 2 sec. lighting then Stand by (GREEN LED)
DI, RI, RING
Stand - BY
–––
–––
BRACKET B Type
TALK KEY
PAIRING SWITCH
(CH1, CH2 / Only BHS-600)
At 100ms once blinking per 1 sec.
CH1 Power OFF
(-) KEY
3 sec.
At 100ms 2 sec. intervals blinking then lighting-out (RED LED)
DI, RI, RI~
CH2 Power OFF
(+) KEY
3 sec.
At 100ms 2 sec. intervals blinking then lighting-out (GREEN LED)
DI, RI, RI~
PAIRING Attempt PAIRING Switch
(-) KEY
At 100ms 3 min. blinking → as failed, at 100ms once blinking per 1 sec. PI, RI, RI, RI, RING
3 sec. Later
PAIRING Done
–––
–––
Last Number Dialing
TALK
Short Push
–––
Transfer Dialing
TALK
2 sec.
–––
Voice Dialing
TALK
2 sec.
–––
End Call
TALK
Short Push
–––
At 100ms twice blinking per 1 sec.
Music Play / Stop (-)KEY + (+)KEY At same time 3 sec.
MASTER / SLAVE SWITCH
DC IN
Low Battery Warning
–––
–––
PI, RI, RI, RI
–––
–––
Talk Start / Stop (-)KEY + (+)KEY At same time 1 sec.
(Only BHS-600)
Beep
LED(Red) operation
CH1 Power ON
Until charging, at 30 sec. intervals Beep
DING, DING, DING 30 sec. Intervals
1) During action, even if SLIDE SWITCH is located to CH1 or CH2, do not return to Pairing even if power goes to OFF → ON.
2) When CH1 is pairing with other devices, SLIDE SWITCH position moves to CH2(within 3 seconds) and again moves to CH1.
Then after 3 sec. Paring works.
3) CH2 is action equally with upside.
RESET KEY
• Headset mounting and dismounting
2. Function of each part
No
KEY
(-) KEY
(+)KEY
TALK
PAIRING
(Slide Switch)
MASTER / SLAVE
(Slide Switch)
RESET KEY
(-)KEY + (+)KEY
FUNCTION
CH 1
I-1. Fix the bracket(A type) firmly
in the back of the helmet by using
dual side adhesive tape.
CH 2
∙ Power ON / OFF : Press for 3 sec.
∙ Volume Down
∙ When disconnected at passage 30 minutes after
Link loss state, Reconnecting attempt
∙ Volume Down
∙ When disconnected at passage 30 minutes after
Link loss state, Reconnecting attempt
∙ Volume UP
∙ When disconnected at passage 30 minutes after
Link loss state, Reconnecting attempt
∙ Power ON / OFF : Press for 3 sec.
∙ Volume UP
∙ When disconnected at passage 30 minutes after
Link loss state, Reconnecting attempt
∙ Last number redialing
∙ Transfer dialing : Press for 2 sec.
∙ Voice dialing : Press for 2 sec.
∙ End call
II. Push up the Bluetooth main body
into the bracket.
I-2. Fix the bracket(B type) in the lower part of the helmet by using clips provided.
Refer to the figure below. Joining the Bluetooth main body with bracket
is the same as above(Braket A).
–––
∙ CH1 PAIRING (CH2 → CH1 switching)
∙ CH1 PAIRING (CH1 → Ch2 switching)
Master ↔ Slave switching
–––
∙ Function that do Power OFF in various active states
∙ Music Play / Stop : at same time press for 3 sec.
∙ Short press in case there is no specified mention about time.
∙ Talk Start / Stop : at same time press for 1 sec.
• Headset custody
∙ Keep where power secures by state that turn off.
∙ Keep to avoid high temperature, direct ray of light, lower than 50℃ or hot vehicles inside etc.
Performance of product is fallen if keep at high temperature and Battery life can decrease.
∙ Parts offered with product keep in dry place that moisture or moisture does not exist.
OPERATION
OPERATION
• Headset POWER ON/OFF
2. Connecting Headset with Audio Device
This Headset is operated particularly CHs with POWER ON/OFF as below.
When POWER ON, press the preferred CH's KEY for 3 sec. then be POWER ON.
Press again for 3 sec. then be POWER OFF.
(Details contents : 9 page KEY operating Time and Beep operating state)
(-) KEY
CH 1
CH 2
∙ Power ON : Press for 3 sec.
∙ Power OFF : Press for 3 sec.
–––
–––
∙ Power ON : Press for 3 sec.
∙ Power OFF : Press for 3 sec.
(+) KEY
1) Power ON Headset CH1[press (-) KEY for 3 sec.].
2) Change [Pairing Switch] to CH2 for Headset CH1's Pairing then change again to CH1.
3) Refer to the instruction manual of Audio device and then connect Headset after
searching and registration.
∙ In order to disconnect the audio device, uncheck the bluetooth option on
the audio device. Turn off the headset power and it will be automatically
connected when the power is back on.
3. Connecting Headset with Headset : between CH2 and CH2
• Volume UP/DOWN
Press (+)KEY or (-)KEY to control volume while operates.
Volume control is available in operation state.
Remark : The volume lever for the conversation between CH2 is fixed,
therefore volume is not adjustable.
1) On a Headset should change [Master/Slave Switch] toward Slave and Press (+)key
for 3 seconds to put the power on. Change [Pairing Switch] toward CH1 then again
toward CH2.
2) On the other Headset should change [Master/Slave Switch] toward Master and
Press (+)key for 3 seconds to put the power on. Change [Pairing Switch ] toward
CH1 then again toward CH2.
• Headset registration and connection method
Should register Headset to Bluetooth device(ex. Cellular phone) to use Headset.
Registration is process connecting via certification that is encrypted between two devices
that Bluetooth function is.
∙ Select "CAMOS BHS-600(BHS-500)" in searched device list.
∙ Should connect to Bluetooth device that register to connect
(or, after connection cancellation) Headset after registration.
∙ Connect with CH1 of Headset when use to connect Headset with Bluetooth device.
(ex. Cellular phone)
∙ Connect with CH2 of Headset when use to connect Headset with Headset.
(this CH2 of Headset does not available to connect with other Bluetooth devices)
∙ When connect with a preferred device, at first POWER OFF the connected Bluetooth.
1. Connecting Headset with cellular phone
1) Power ON Headset CH1[press (-) KEY for 3 sec.].
2) Change [Pairing Switch] to CH2 for Headset CH1's pairing then change again to CH1.
3) Refer to the instruction manual of cellular phone and then connect Headset after
searching and registration.
(When Headset is already connected with other device it does not operate Pairing Mode)
∙ Once connected device is connected automatically when POWER ON.
∙ Refer to the Instruction manual of cellular phone to replay music files that
is built-in to cellular phone and to listen to music.
∙ In order to disconnect the cellular phone, uncheck the bluetooth option
on the cellular phone. Turn the headset power and bluetooth will be
automatically connected with audio device when the power is back one.
10
11
OPERATION
OPERATION
• Function direction
3. To listen to music
1. To answer the phone
1) When completed the connection Headset with Celluar phone, become to answer /
to call state.
2) The function of Auto Answer Call is included this Headset, does not need additional
key operating to answer because is received automatically.
3) Press [TALK KEY] shortly to disconnect on a headset.
1) To listen to music files stored to a cellular phone through Headset
_Connect Headset with Cellular phone( Audio built-in).
_Please refer to the cellular phone manual to find how to select the "mp3" mode
to play.
_To stop the music press [(-)KEY] and [(+)KEY] for 3 sec at same time.
_To play the music again press [(-)KEY] and [(+)KEY] for 3 sec. at same time.
Based on kinds of Cellular phone, maybe only MP3 file s are
played Check the format if the stored music file s are MP3 or not.
2. To call
1) Last Number Dialing
_Shortly press [Talk KEY] to use the function of last number dialing.
2) Call Transfer
_If press [TALK KEY] for 2 sec. in current cellular phone calling , telephone is
connected to Headset.
_If press [TALK KEY] for 2 sec. again, can move to current cellular phone calling.
3) Voice Dialing
_If press [TALK KEY] for 2 sec., voice information is announced.
This time, should operate following voice information to call.
∙ Please refer to the instructional manual of each cellular phone for voice
dialing. Voice Dialing option of bluetooth is only available for the cellular
phones that has the voice dialing option and registered for the stereo
headset service.
∙ If cellular phone is disconnected due to the long distant between the
headset and cellular phone the call will be automatically connected when
these two equipments get near within distance of 10m within 30min.
∙ When 30 minutes are passed, press [(+)KEY or (-)KEY] shortly.
It will be re-connected, starting receiving signals again.
When failed to connect, POWER OFF then ON again for pairing.
12
2) To listen to music files stored to an Audio Device through Headset
_Connect Headset with an Audio device.
_Please refer to the audio device manual to play the music.
_To stop the music press [(-)KEY] and [(+)KEY] for 3 sec. at same time.
_To listen the music press [(-)KEY] and [(+)KEY] for 3 sec. at same time.
∙ Even if press [(-)KEY] and [(+)KEY] for 3 sec. at same time then music
is stopped, the Audio Device is playing continuously.
∙ Based on kinds of Cellular phone, maybe only MP3 files are played.
∙ Stopping / Playing by pressing [(-)KEY] and [(+)KEY] for 3 seconds is
only possible on "MUSIC MODE".
4. To talk
_When completed to connect Headset(CH2) with Headset(CH2), become to Talk.
_To stop to Talk, press [(-)KEY] and [(+)KEY] for 1 sec. at same time.
_To talk again, press [(-)KEY] and [(+)KEY] for 1 sec. at same time.
∙ The volume of conversation between CH2 is not adjustable.
13
OPERATION
OPERATION
5. To talk between music playing
_Connect Headset with Cellular phone or Audio Device then make to listen to music.
_Connect Headset(CH2) with Headset(CH2) then make to Talk.
_When sensed the Audio signal while listen to music, Music is in Mute state and become
to talk between Headsets.
_To stop to talk press [(-)KEY] and [(+)KEY] for 1 sec. at same time. This time, start
again after 10 sec. to listen to music of Mute state.
_To talk again, press [(-)KEY] and [(+)KEY] for 1 sec. at same time.
∙ If CH2 conversation is started in the middle of playing the mp3, the music
will turn to mute mode.
∙ After or during the conversation, if there is no sound for 10 seconds, music
will be play with proper volume.
∙ When the user hangs up the phone call by pressing [TALK KEY] on the
headset shortly, the stopped audio device will be back on the playing mode.
∙ In order to connect the headset with Audio device and cellular phone at
the same times, please use the audio device that only supports the stereo.
∙ When press once [TALK KEY] shortly, the music is disconnected and cellular
phone returns to call to last number based on kinds of cellular phone, should
press twice [TALK KEY].
∙ If power is turned off or the cellular phone is away from the headset for more
than 10m while music is being played, note that these two devices will be
disconnected and the music will become mute.
6. To speak over the telephone between music playing
1) To speak over the telephone between playing music files stored to Cellular phone
_Connect Headset with Cellular phone built-in Audio, then make to listen to music.
_Connect Headset with Cellular phone.
_If there is an in-coming call while music is played, the music will be stopped and turn to
conversation mode.
∙ When the user hangs up the phone call by pressing [TALK KEY] on the headset
shortly, the stopped audio device will be back on the playing mode.
∙ If the user dials to make a phone call by pressing the [TALK KEY], the music
would not be played automatically. If the user desires to play the music,
press [(+) and (-) KEY] at the same time for 3 seconds.
7. To speak over the telephone between conversation
_Connect Headset(CH2) with Headset(CH2) then make to Talk.
_Connect Headset with Cellular phone.
_If there is an in-coming call to the cellular phone, the conversation will be on mute
for the cellular phone call.
_When the call is hung up, conversation mode will be back on.
∙ Conversation and phone call at the same time is not allowed.
2) To speak over the telephone while replay the music files stored to Audio Device
_At first, register Headset to cellular phone.
_Release Bluetooth mode of cellular phone.
_Connect Headset with audio device then make listen to music.
_Set up Bluetooth ON mode of cellular phone so that connect Headset with cellular phone.
_When in-coming the signal of cellular phone while listen to music, music is disconnected
then start to speak over the telephone.
14
15
APPENDIX
REGULATORY INFORMATION
• Battery charging and standard use time
Charging time
About 2 hours
• FCC compliance Information
Standard use time
Stand-BY time
Speak / Play / Conversation
Play + Conversation
180 hours
13 hours
8 hours
• Specification and Feature
Device name
Wireless Data Communication System(BHS-600 / BHS-500)
Bluetooth version
Version 2.0
Supported Bluetooth profile
HFP, HSP, A2DP, AG profile
Frequency range
2.402 ~ 2.480MHz
Transmission output
0.25 ~ 2.5mW
Wireless use distance
At max 10m
Dimension
51(W) x 90(H) x 20.5(D) mm
Weight
120g
Operating temperature
-20 ~ 50℃
Adapter input
AC 100 ~ 240V, 50/60Hz
Adapter output
DC 5V, 500mA
• FAQ (Frequently Asked Questions)
This device complies with part 15 of FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received.
Including interference that may cause undesired operation.
• Information to User
This equipment has been tested and found to comply with the limits for a Class B digital device,
Pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio Frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures ;
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
• FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modifications to this
equipment may cause harmful interference unless the modifications are expressly approved in
the instruction manual. The user could lose the authority to operate this equipment if an
unauthorized change or modification is made.
Hereby, [CAMOS], declares that this [Motorcycle Bluetooth System(BHS-500/
BHS-600)] is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
16
17
MEMO
MEMO
18
19

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 10
Create Date                     : D:20070330183629
Modify Date                     : D:20070330183629
Producer                        : Corel PDF Engine Version 1.0.0.536
Creator                         : CorelDRAW 버전 12.0
Title                           : BHS-600_manual(ENG)_A5.cdr

EXIF Metadata provided by EXIF.tools