Cannice Technology 0W2 Bluetooth headset User Manual 15 W2 UserMan

Shenzhen Cannice Technology Co., Ltd. Bluetooth headset 15 W2 UserMan

15_W2 UserMan.pdf

12345610min? ?7Following items are includedStart hereBasic operationVolume controlPress the Volume "+" or "-" to turn volume up or down, you hear beep once reach the maximum or minimum volume. 3. Select "W2". If your phone asks, enter 0000 (four zeros) for the passcode or accept the connection. The LED indicator stops flashing red and blue once successfully paired, you hear "Connection successful". Some phone list an option to "Play through earphone", select to use the earphones.Pair another phoneUSB cableEar cushionsMultipoint technology enables you to pair another phone and take a call from either.To pair with another mobile phone, follow the steps for "Pair one phone". After pairing successfully, restart the earphone to connect to 2 paired mobile phone automatically.Status indicatorInstructionPower onPower offStandbyIncoming callPairingLED statusStays blue 1.5 secondsStays red 1.5 secondsBlink blue twice every 5 secondsBlink blue once every 3 secondsFlashes Red and Blue alternatelyVoice prompts Power onPower offPairing//Battery low Flashes red twice every 8 seconds Battery lowProduct overviewBluetoothONSe arc hW2CallAnswer a callRedial the last callMute on/offPress any button (Multifunction/Vol+/Vol-) once.Double-press the Multifunction button in standby mode. The mobile phone will redial the last call number.Press the Volume "+" for about 2 seconds to mute on/off.Reject a callPress and hold the Multifunction button for about 2 seconds.Press the Multifunction button once.End a callCharging Stays on red while charging,Stays on blue after fully charged /1. Volume + / Track forward 5. Status indicator2. Multifunction button 6. Talking mic3. Volume - / Track back 7. Turn on / off4. Charge port Pair one phone1. Press and hold the Power button for about 3 seconds until LED flashes blue and red alternately, you hear "Power on" and "Pairing", now earphone is in pairing mode.2. Activate Bluetooth on your phone and set it to search for new devices.PairingBluetoothONSe arc hW2BluetoothONSe archW2ON连 接W2BluetoothAuto power-offMore featuresBattery IndicatorHard resetWhen the distance between the earphone and the mobile phone is beyond effective range, a voice prompt "Connection lost" and earphone disconnects with the mobile phone, the earphone will power off automatically once no active for 10 minutes.ChargingConnection standbyAutomatic connection after powering onRINGCOLLARMUSICWIRELESSHEADSETYour earphone has enough power to complete the pairing and a few calls. When battery is low, you will hear the voice prompt "Battery low". It takes 1.5 hours to fully charge the earphone. The red LED turns on during charging. The red LED will turn off and the blue LED will turn on after being fully charged.When the earphone is connected to a device with iOS system, a battery indicator will appear at the upper right of the system, indicating battery status of the earphone. After successful pairing and connection, you will hear the voice prompt "Connection successful". the earphone will be in turning on mode or standby mode automatically and the blue LED will flash twice every 5 seconds, when the earphone disconnect the phone, you will hear the voice prompt "Connection lost".When the earphone and phone have been paired once, they will automatically connect when the earphone is on and Bluetooth is activated on the phone.In turning on mode, press and hold the Multifunction button with the charger plugged to reset the earphone and power off(you can release the Multifunction button 2 seconds after mounting the charger). W2 INSTRUCTIONNote: The lifetime of the battery will be significantly reduced if your earphone is left uncharged for a long period. We recommend that you recharge your earphone at least once a month.Switch between the earphone and phonePress the Volume "-" for about 2 seconds during a call, the call will be switched to the mobile phone, redo this operation again, the call will be switched to the earphone. End current call and answer new callWhen a new call rings during a call, press the Multifunction button once to answer new call and end current call simultaneously.On hold current call and answer new callWhen a new call rings during a call, hold the Multifunction button for 2 seconds to hold current call and answer new call. To switch between held call and active call, Hold the multifunction button for 2 seconds.MusicMusic play / pausePress Multifunction button once to play / pause music. (Some phones may require you to start a media player first) Track back/forward Press the Volume "+" for 2 seconds once to skip track forward, press Volume "-" for 2 seconds once to skip track backward. Switch Music and Call When a call rings during a music playing, the music automatically pauses to allow you to answer or ignore the call. Once the call is ignored or ends, the music is resumed.(Need media player support)Effective rangeClear paired listIn standy mode, press Vol+,Vol- and Multifunction buttons simultaneously for about 5 seconds, LED indicator flashes blue&red 5 times quickly, then clear all paired list, the earphone will enter pairing mode automatically after power on next time. Voice dial (Need phone support.)Press Vol+ and Vol- simultaneously, you will hear beep, and wait for phone prompt and then tell the phone to dial the name of a stored contact.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Thisdevicecomplieswithpart15oftheFCCrules.Operationissubjecttothefollowingtwoconditions:(1)thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.Changesormodificationstothisunitnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidtheuser'sauthoritytooperatetheequipment.

Navigation menu