Cannice Technology M14 Bluetooth Earphone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3266293
Application ID	Zu6Ta1wXLBsLAf8E5woczw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	37.85kB (473166 bits)
Date Submitted	2017-01-21 00:00:00
Date Available	2017-01-21 00:00:00
Creation Date	2017-12-21 06:03:12
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-12-21 06:03:12
Document Title	Users Manual
Document Creator	CorelDRAW X7
Document Author:	Zaihui

504.00 mm
Music
Call
Answer a call
(Need media player support).
Press the Multifunction button once.
Reject a call
Press and hold the Multifunction button for about 2 seconds.
Music play / pause
Press Multifunction button once to play / pause music. (Some
phones may require you to start a media player first) .
End a call
Press the Multifunction button once.
Mute on/off
Press the Volume "-" for about 2 seconds to mute on/off.
Switch between the earphone and phone
Press the Volume "+" for about 2 seconds during a call,
the call will be switched to the mobile phone, redo this
operation again, the call will be switched to the earphone.
Safety and care
Basic operation
Warning
Status indicator
Track back/forward
Press the Volume "-" for 2 seconds once to skip track backward,
press Volume "+" for 2 seconds once to skip track forward.
Instruction
LED status
Voice prompts
Power on
Stay blue about two second
Power on
Power off
Stay red about two second
Power off
Standby
Blink blue twice every 5 seconds
Pairing
Flashes red and blue alternately
Pairing
Battery low
Flashes red twice every 8 seconds
Battery low
Charging
Stays on red while charging
Stays on blue after fully charged
Volume up/down Press the volume
"+" to turn volume up
Turn on voice prompts: enter pairing mode: Press the volume "+"
button for 3 seconds, the blue LED lights flash 3 times;
Using earphone at high to moderate volumes for extended periods
of time will result in permanent hearing damage .It is advised you
keep volume levels moderate to low at all times for your safety.
Turn off voice prompts: enter pairing mode: Press the volume"-"
button for 3 seconds, the red LED lights flash 3 times.
Do not use while driving a car, cycling, operating machinery, or
performing other activities that require hearing surrounding sounds.
Clear paired list
Do not use earphone in thunderstorm weather, the earphone may
not work properly in the condition, and increase the risk of being hit
by lightning .
Press and hold the volume"+ " button ,the multifunction button and
press volume"-" button for about 5 seconds in standby mode.
(Note :The earphone will enter pairing mode after power on next time.)
Press the volume
"-" to turn volume down
Power on
Redial the last call
Press and hold Multifunction button for about 2 seconds,
the LED flashes blue twice.
Double-press the Multifunction button in standby mode.
The mobile phone will redial the last call number.
Voice dial (Need phone support)
Power off
Press and hold Multifunction button for about 5 seconds,
the LED flashes red twice.
Press the Volume button "+" and "-" in standby mode , wait
for phone prompt and then tell the phone to dial the name
of a stored contact.
Tips: When the distance between the earphone and phone is beyond
effective range, earphone disconnects with phone. Earphone will
power off automatically once no active for 20 minutes.
Earphone may not work properly under high temperature or high

humidity conditions.
Hard reset
Do not use any corrosive cleaner/oil to clean the earphone.
If the earphone cannot be turned on even when fully charged or does
not respond during use, follow the instructions below to reset it.
1.While pressing and holding the multifunction button, connect the
earphone
to your PC’s USB port or a USB power adapter with the
charging cable.
2.Keep pressing and holding the Multifunction button until the

earphone turns on. The earphone is now reset.
If the earphone comes in contact with liquids, quickly wipe away .If
submersed in water, do not turn the earphone on until completely dried.
Tips:liquid submersion voids the warranty.
Keep the earphone and packaging out of reach of children .
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference,
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment .
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Bluetooth Earphone
for
calls
and
music

M14 INSTRUCTION
Pairing
Start here
Following items are included
Product overview
Charging
Your new earphone has enough power to pair and make a few
calls. It takes 2 hours to fully charge the earphone; while charging,
the battery indicator light is red, the indicator light flashes blue
once charging is complete.
Note: The lifetime of the battery will be significantly reduced if
your earphone is left uncharged for a long period. We recommend
that you recharge your earphone at least once a month.
Pair one phone
Note: When the earphone and phone have been paired once,
they will automatically connect when the earphone is on and
Bluetooth is activated on the phone.
1.Make sure the earphone is turned off and within 1 meter of your
phone, press and hold the Multifunction button until the LED
indicator flashes red and blue alternately (About 5 seconds), then
release Multifunction button.
2.Activate Bluetooth on your phone (See below for more details).
Windows Phone 8
a.On your phone, open the Settings menu.
b.Select Bluetooth . If Bluetooth is off, turn it on.
The Phone will search for new devices automatically.
Bluetooth
1. Volume + / Track forward
2. Charge jack
3. LED indicator
4.Talking mic
USB cable
5. Multifunction button
6. Volume - / Track back
Bluetooth
iPhone
a. On your phone, open the Settings menu.
b. Select Bluetooth. If Bluetooth is off, turn it on.
The iPhone will search for new devices automatically.
Android phone
3. Select "M14". If your phone asks, enter 0000 (four zeros) for the
Passcode or accept the connection. The LED indicator stops flashing
red and blue once successfully paired, you hear "Connection successful".
Some phone list an option to "Play through earphone", select to use the
earphones.
ON
M14
Ear cushions
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
ON
M14
Pair another phone
Multipoint technology enables you to pair headset to two phones
at the same time and take calls from either:
Pair headset to first phone per usual pairing procedure, then switch
off headset. Then switch on headset again and enter pairing mode,
enable Bluetooth function in second phone, find headset’s Pairing
Name ",M14" and pair to second phone per usual procedure. Switch
off headset one more time. Then simply switch on headset, without
entering pairing mode (a short press until blue light comes on). The
headset should automatically re-connect to the last connected
phone (which is the second phone). Then find headset "M14" in first
phone’s Bluetooth setting, select this to pair to first phone. Both
phones should now be paired to the headset.
Search
Search
Bluetooth
a. On your phone, open the Settings menu.
b. Select Bluetooth (For old Android phone, Bluetooth is found in the
Wireless & Networks). If Bluetooth is off, turn it on. Select Search for
Devices if your phone does not automatically search for new devices.
ON
M14
Connect
Bluetooth
ON
M14
Connect

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:e7ba8280-a1ce-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:15 23:07:21Z
Create Date                     : 2017:07:15 23:07:21Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:e7ba8280-a1ce-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled

EXIF Metadata provided by EXIF.tools